Customization of the insertion in a custom user interface palette

Similar Questions

• Shared "Top N" gets access denied - the custom user interface

  I shared some dashboards for a standard user to vCops the custom user interface, and the "Top N" widgets do not work.

  So far, everything has been fine.

  I shared a dashboard home, as well as a vCops of the box and a pak of SAP management dashboard.

  All widgets 'Top N' display 'access denied to the requested page.

  Other parts of the same work of dashboard (home).

  Any thoughts?

  There is a permission that you add to the group to which you share the dashboard. There are permissions to a 'Top - N analysis' you must give to this group. In the contrary case, the refusal of access will appear when users in this group are attempting to access the dashboard in question.

• How close/hide dashboard appearance "pinned" in the custom user interface

  There is a dashboard in the custom user interface that is not a small "x" in the upper right tab that would be closed/hidden. Is anyway, in the interface user or cmdline that let me close/hide this dashboard? Screenshot attached. 5.8.2 running

  
  

  Never mind. A dashboard that would not close was marked as "default" dashboard. If you want to close a dashboard that is marked as 'failure', a different dashboard by default and it then you can close the dashboard that you couldn't close before.

• Determine the maximum use of the processor for a virtual computer in the custom user interface

  I want to determine the maximum use of the processor for a virtual computer in the custom user interface.  How can I do this?

  If I use a supermetric, there is no kind of attribute under CPU called "maximum use.

  Certainly, you get points for a long question! Although to be fair, it's probably my fault to feed you so much information to digest at once.

  1. I would say you can do two ways visually. Use the operations > detail view for 'normal ranges' use the upper limit of the normal range as your typical max. You want an absolute peak, add the metric of a graph or observe that highlight high and low watermarks.

  2. There are a lot of ways to display data, but if you want to display a single metric over a period of time, we could use the following widgets [on top of my head]:

  Top - N analysis

  Weather map

  Analysis of distribution of data

  Among these, I think of your desire for a "peak". Who you want real value, which eliminates the weather map. Then, I think that the concept of a 'Summit' and what is the best thing, I think that the 95th percentile... then I came with the widget of data distribution. The decision is ultimately yours given your particular use case.

  3. you can have it apply to several virtual machines - it's just a widget capable of being an independent provider or receiving widget (metrics, DO NOT choose to select resources). Each resource/metric will add to the widget and you can remove them if you like after it is added. You can certainly all the time you visit... It is date and time standard options you have in all the other widgets chart. With the widget data distribution, you want as much time as possible to get an accurate histogram of the cycles of workload.

  4. This is similar to the question above. You can certainly add parameters of individual resource or a DM that summarizes or AVG groups of resources. And as above, the delay is configurable, along with the other graph widgets.

  5. it's part of Q4 - you can sumN or avgN up to any number of resources with a SM, then discovers that SM in the widget of data distribution. When I said container, I mean an application, group resource pool... all that acts as a container parent within the vCOps.

  6. that's correct, SMs calc using data collected last points... aka single period of time. When you are referring to the longest period, I gave you a few examples of the attributes that are composed of several periods of time which are calculated and created by the adapter for VMware vCenter behvaior. In this case, you have the GVA 15 min CPU 1.5; These specific simple mobile GVA can be specific OR a copy using SMs. Next, you will have the chance is to find a way to distribute what you need through a widget [at that time].

  7. the distribution of data is not for export, it is for Visual functions. If you want the data in CSV, just use a typical chart of metrics and export to a csv and calc your own pics, avg, 95th, whatever.

  8. This is a bit of a mix of all your questions, put in place.

  You are right, if you added those 3 VMs, then calc was the 95th of the AVG. Like Q7, you would not export the data of the distribution of data because the raw data points are not - you do not pass the metric to a metric graphics standard and export via csv.

  Take advantage of...

• UIMsg_BreakOnRunTimeError of completely custom user interface management

  I develop a completely custom user interface for TestStand 2012 SP1 operator (without ActiveX / ApplicationMgr etc.;) "I know, I know...).  I'm trying UIMsg_BreakOnRunTimeError to deal appropriately and need advice.

  (1) my first question is what I call DisplayRunTimeErrorDialogEx() with the appropriate SequenceContext, but the dialog box disables many of the options. Under manage common error, recovery, ignore and abandon immediately (without cleaning) are grayed out (disabled) as well as the box jump of. With the same sequence SequenceEditor and the po sample UI display correctly this dialog box.  Any ideas on what is the cause?

  

  (2) Secondly, the best way to manage the selections to the user?  dontShowAgainForExecution, dontShowAgainForBatchand suspendExecution seem quite simple documentation.  i.e.

  If (dontShowAgainForExecution)
  
      execution. RTEOptionForThisExecution = RTEOptions.RTEOption_Continue;
  
  If (dontShowAgainForBatch)
  
      thread. SetBatchRTEOption (RTEOptions.RTEOption_Continue);
  If (suspendExecution is false)
  
      execution. RESUME(); Fix? Execution seems already paused. What to do if this value is true?

  Now what about the runTimeErrorAction?  I guess for RTEOption_Abort the word execution of . Abort().  What are the appropriate steps to RTEOption_Continue, RTEOption_Ignore, RTEOption_Retry, & RTEOption_ShowDialog?

  (3) Finally, once the dialog box is closed, my execution ends with the result success rather than error state.  What happens here?

  Your help is appreciated as always,

  -Terrence Jones

  (1) this is probably the user privileges, you may either not connected with user at all or the user has privileges to debug. If you do not use the users, you can disable the privilege check in the options of the station.

  (2) something like this:

  void ApplyRTESetting (TS:equenceContextPtr sequenceContext, TS::RTEOptions rteOption, bool breakExecution)
  {
  Thread TS::ThreadPtr = sequenceContext-> thread;
  Execution TS::ExecutionPtr = sequenceContext-> run;

  Switch (rteOption)
  {
  case TS::RTEOption_ShowDialog:
  case TS::RTEOption_Continue:
  case TS::RTEOption_Abort:
  wire-> ClearTemporaryBreakpoint();
  break;
  by default:
  break;
  }
      
  do action according to the selected option
  Switch (rteOption)
  {
  case TS::RTEOption_Retry:
  sequenceContext-> NextStepIndex is sequenceContext-> StepIndex;.
  wire-> ClearCurrentRTE();
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Continue:
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Ignore:
  wire-> ClearCurrentRTE();
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Abort:
  execution-> Abort();
  break;
  }
  }

  Also for the two other parameters we generally use the rteoption of the dialog rather than continue to hardcode, but you can do this job, how you want if you prefer different behavior:

  Example:

  If (dontShowAgainForExecution)
  context-> run-> RTEOptionForThisExecution = rteOption;
          
  If (dontShowAgainForBatch)
  context-> thread-> SetBatchRTEOption (rteOption);

  (3) maybe you call ClearCurrentRTE() to ignore alternatives.

  Hope this helps,

  -Doug

• Error 503 in a custom user interface

  Hello

  I have VAPP OPs 5.0.1. After watching emailFilter.xml and quiting this file. I can not connect to the custom user interface with any problem with vsphere UI. WHY?

  error:

  The web server is not available. You will be re-directed when the service is available.

  Are you sure that you do not corrupt the file? A defective xml file can take down the custom user interface. If you have no change tried to replace it with the backup file created before editing it?

  Have you tried to restart the server via the admin INTERFACE?

• custom user interface

  I read custom UI get startted it was hard but good

  You have to be an expert in the custom user interface suggestions (video tuterial or...).

  Hello

  The custome UI that's exactly... CUSTOM :-)

  You must first understand what information you need. For example, if you need to view the LUNS read latency: Lun who have high latency in my environment : http://www.virtualclouds.co.za/?p=163

  It is not difficult to learn... He must know what data you want to view and their little creativity.

• Graph XY on the custom user Interface

  Hello.  I'm kinda stuck (or really stuck ).  In any case, I'm newbie.  That being said, I've had a few really good help on how to pass table through the postuimessage (xparamdata) of teststand to my user interface customized a few weeks ago.  It really helped.  Thanks again.  However, I'm still another question.  I'm moving a container of teststand.  The container or the cluster of table and table x of y in a XY Chart.  I pass to my custom IO and try to update a chart XY on my IO.  I tried to use the same code that I used for a table, but it does not work... of course.  I just need a little help to find out how to get this update on my graph XY on my IO.  The attached photo, this is what I have so far, but it is not close to work.  Can someone give me some advice?

  String of BTW - looking for you wouldn't array1 and array2.  It would be the names of the tables in your cluster.  In TestStand search strings are the relative path to the object of the referenced property.  In this case your container is referenced from which is the name of your berries.

  Hope that makes sense.

• creating the table in the custom user interface

  Hello

  I am trying to create a table of revenue as part of my custom in VBAI user interface. I have attached a code example of the with few variables. I wonder if there is a way to do the same thing without VBAI throw an exception that it cannot have dependencies. Please throw your entries.

  Thank you.

  I have attached a few changes 2 Untitled. VI (updated the connector pane) and custom UI VI and a simple inspection (be sure to check the status of cleanup to see how ref VI is closed). I hope this helps.

• custom user interface will not close

  Hello

  I have created a custom UI TS, based on the graphic interface delivered simple TS. When I close the user interface, the process remains in the list of windows processes, I can put an end from the windows Task Manager. This only happens if the adapter of LabVIEW is set to Run-Tiime engine. If I select the LabVIEW development system, the GUI will be entirely closed.

  TestStand 2014 32 bit

  LabVIEW 2014 32 bit

  Windows 7 Enterprise 64-bit

  any idea?

  Hi Madottati,

  the first thing that comes to mind is to close the process programmatically as you do in LV, when you build an executable file. An example how to do this is shown here:

  Work with the TestStand Simple User Interface - (2013 and previous TestStand) LabVIEW - National Instruments
  http://www.NI.com/white-paper/14376/en/

  you want to look at the section 'shutting down '.

  I hope this helps!

• Custom user interface does not update

  I have to paste a code very long to explain my question, for I can not download the attachment to the forums.

  The ListStyleButtonField has been downloaded from the official website, it's very cool, I think so, but now I faced a problem with this custom user and the PaneViewManager interface.

  Can I use ListStyleButtonField.setText (String text) method to update the text of the list in normal application, but using PaneViewManager is not updated the text, unless you use the keyboard to move the focus to another field.

  In my code, it is a PaneViewManager, 3 parts, and ListStyleButtonSet 3 in Pane1, press 1 to change the text of lists by pressing 2 2 keyboard component and so on.

  For example, in part 1, I press the 1 key, the Pane1 lists need to be changed, but I move the focus on them and then they will be refreshed.

  too much code so shortly before the end of work...
  I would try to call invalid, or, if that fails, return all the elements of the listfield.

• BB10 waterfalls, ndk custom user interface

  Hello

  Could someone let me know what part we need to focus to develop customized ndk and cascades user interfaces?

  As in Java, we have always used paint, put on the page, sublayout etc..

  What is the model would be in waterfalls, ndk?

  Thanks in advance

  This should help you:
  http://devBlog.BlackBerry.com/2012/09/Cascades-custom-UI/

• No custom user interface design

  Hi all.

  My plugin requires some things from design to the model, including circles, lines, and (hopefully) text. However they are * not * part of a user interface custom - in other words, they can remain on the screen during a RAM Preview, for example.

  I tried using Drawbot, but I don't know that I can use for this purpose, the reason being how to make a drawing ref using suites. EffectCustomUISuite1()-> PF_GetDrawingReference() without a context (which looks like to the context is passed as part of a UI event, which I won't)?

  I already wrote a lot of code to draw pixels directly to the screen, which works very well so far, and I can go ahead and write functions to draw shapes using this method; I was just wondering if I'm supposed to use Drawbot for drawing UI no, or if "roll your own" is the way to go here.

  Thank you

  Christian

  Hey christian.

  It is not too complicated. Let's give it a go.

  Basically, AE doesn't know, or he care what how you fill the output buffer.

  especially is not a question of AE, but rather a BONE drawing tools question.

  the only part which concerns the AE API is the part where you copy your results into the output buffer. (we shall return), since you can use BONE on BONE contexts of drawing of drawing tools, it's exactly what we'll do.

  during the call to render, you start the process by creating a new bitmap drawing context (I'll demonstrate on quartz. you will get the general idea). You'll probably want to create the same output of the plug-in buffer size. It is up to you.

  allocation of memory for the graphics context using the suite of memory and use this handle memory with CGBitmapContextCreate(). (research of some code samples there periferial things to do)

  now that you have a buffer of graphics os, you can start to draw.

  CGContextShowTextAtPoint() draws a string

  CGContextDrawPath()'s going to draw a line, ect...

  so.

  Now you have a buffer of graphics os invisible filled with goodies that you want to copy into the output buffer.

  How do you do that?

  Well, remember this handle memory, that we mentioned earlier?

  It now contains the filled buffer, you have just drawn in. it's how to get the base address for the graphical operating system.

  osBufferBaseAddress = suites. HandleSuite1()-> host_lock_handle (osBufferMemHandle);

  Take a look at the example of CCU (in the function of rendering) to see how to access the output directly buffer in RAM and it is advisable.

  Just copy the value of each pixel of the context to the output during the pointer pixel buffer. (it's all there in the sample of CCU)

  Once the copy is complete, get rid of the context, to free memory, and you are finished.

  questions?

  None?

  good.

  :-)

• Lock the orientation of the display against instructions for user interface?

  Hello
  I am new to this forum and I want to say hello to everyone here.

  I have developed some simple games using Marmalade fast during the Marmalade for BlackBerry 10 Port-o-thon and obtained their release denied because of problems when switching of modes of orientation.

  Because of the beta status of 6.2 of Marmalade and jam quick, I would rather stay with on BB10 portrait and landscape on the Playbook.

  Can I lock orientation and get my apps aproved or is it against the instructions for user interface?

  Concerning

  It is absolutely perfect lock orientation for applications. Go ahead, orientation of the lock and submit. You shouldn't have any problems.

• No data when using custom as a widget in the custom user interface relationship.

  Hello

  VCOps 5.7.2 is the version we accounts. We use "personal relationship" as a widget to monitor specific resources. But all resource objects are in a State of unkonwn after configuration and selecting the type of resource. It's a little strange because the same resource objects are OK in relationship VC widget. Is there something wrong in the configuration? Thank you!

  The result is displayed as below.

  

  Xin

  You see "?" State of resources because you have not configured entirely this widget. You have added ResourceKinds as a third party, but you still have to select the parameters that will be used for the 'Workload' category or metric. The needs of each level to be selected, and then select "change metric Mapping ', then select a metric for the"Workload"category and assign limits yellow, orange, red. Remember, it is a custom widget so that you can put "ANY" metric to display for the ResourceKind you are editing.