Customize the black guest "* is full screen" when using the API of full-screen mode full screen shutter?

Similar Questions

• OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

  This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

  Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

  Thanks for any help.

  The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  

• disclosure of the API with vcenter linked mode

  The API on a vcenter arrive on an another vcenter linked entities? In the linked vcenter inventory seems to appear anywhere in the CROWD.

  The linked vcenter can be managed in the vcenter gui, but it's just mistletoe knowing to send requests to the api for the other vcenter? The API knows something about the related modes?

  No, he can't manage them. In implementing related patterns as I understand it, it provides you with just the connections for the two vCenter. Linked Mode also uses ADAM to replicate permissions between linked VC, but you must always send API calls appropriate for the appropriate vCenter if you want to perform a specific operation on a given entity. It isn't really a "Federated", but just vCenter allowing multiple connections in a single view or a pane of glass.

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Need to customize the button close in edit mode

  Dear Experts,

  I have a requirement where I've implemented separate close button to return to the normal mode of editing (ctrl + shift + E). So I just have to remove the button closure that comes by default for pageCustomizable. Is it possible to customize this button?

  Jdev:11.1.1.6

  Thank you

  Mounira

  Hello.

  Extending the capabilities using Oracle composer edition

  Using the property toolbarLayout of pe: pageCustomizable you can choose which parts of the composer to display.

  Remove property of the list 'button' Remove button (if active sandbox) save and close button.

  I don't know if it's to help you, but you can add the button Save Sandbox for yourself if necessary.

  Kind regards.

• Error message indicating the r300 display driver stopped responding when using the full screen.

  Original title: driver atikmdag error message when using the full screen.

  Error message indicating the display driver r300 unresponsive, but has recovered, usually when enter full screen mode.

  Hi Peterrichardson,

  1. when exactly you get this message?

  2. what player do you use?

  3. you remember to make changes to the computer before this problem?

  Method 1:

  You can try to reduce the hardware acceleration and check.

  a. click the Start button, Control Panel.

  b. now, select appearance and personalization, and under display, select adjust screen resolution.

  c. now, select adjust the resolution.

  d. click Advanced settings.

  e. now, click the Troubleshooting tab, and select the change settings button.

  f. in the Security dialog box, click on continue.

  g. move the hardware acceleration slider to the third notch.

  h. click OK and restart Windows.

   

  Method 2: Update your display driver

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Is there anyway to customize the screen to "play" when you create the project responsive for Tablet and mobile?

  Hello

  I was wondering if there is an easy way to customize the screen button "play". Currently, when the project is considered on the mobile, it displays the button on the large central room with the gesture icon in the upper right. Essentially my client do not like this, and although they don't have a landing page before moving in the course, they would prefer the page to be better integrated in the style of running. Basically, I want to put this page in a title page that shows a picture of background rather than having a white background all.

  I had a glance through the preferences and settings and have failed to find anything, so I thought I'd come and ask here see if someone else has done something similar before you start messing around with the release of HTML5.

  Any ideas or solutions would be very welcome!

  Thank you

  K

  Publish fewer setting/start and end, if you deselect the AutoPlay option, you can navigate to a picture that you want to use.

• How do I customize the resolution of Windows XP so I can do full screen in a virtual machine?

  OK, so I'm using Ubuntu Linux, but I want to kind of run Netflix. Given that Netflix only works on Mac OS X and Windows, I found a way to run Netflix inside a virtual box. Since I am under GNOME, which has a range of tool up and down * I replaced the bottom panel with a well dock, so it gives him more room * I can not afford to make the maximum resolution. Is there a way to customize the resolution of Windows XP, so I can watch Netflix easier? Otherwise, I stay with 1024 x 768

  Hello

  Windows Virtual PC on Linux is not supported. For more information on the supported operating system, see this link.

  http://www.Microsoft.com/Windows/Virtual-PC/support/requirements.aspx

  In addition, also refer to this link.

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/thread/01cf6367-AA42-4351-93F6-6c7db5f6e532

  Hope the helps of information.

• Distortions of the screen when using Firefox on Android

  Hi, a recurring problem - when using Firefox on my Android Web site, are often distorted. If I try to zoom before to increase the size of police or image during playback, the screen breaks and distorts, with different sections of text and images disappear (black sections of the screen appear) or overlapping, often in a different font sizes. The Web site displayed on the screen as "jumps around." The same thing happens if I try to select text for copy - it is impossible to select all or selection is distorted. I have not had this problem before and noticed only recently. Almost impossible to use the browser now! What is the result of an automatic update of the software? Help, please! Thank you.

  Please try to update to Firefox 38.

• How can I get rid of the black border around my screen?

  After an update, my screen resolution changed for no reason. Tried to change, but now I have a black border around my screen that I can't get rid of.

  Hello

  Windows Update will sometimes offer you updates of graphics drivers; NEVER accept them.

  Only go graphics drivers of your computer or the manufacturer of the graphics Web site map.

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  Then try to change the screen resolution.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here is the information on the Windows updates.

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.

• Won't start at all. just a black screen. Only the satrts upward on safe mode

  Won't start at all. just a black screen. Only the satrts upward on safe mode

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• DeskJet 1010: Black cartridge is full; but the prints either light gray or not at all.

  The black cartridge is full; but do not print.  When I do a test page with HP print and Scan doctor, black prints grey.  When I try to print using my desktop burner, it prints nothing.  Prints a blank page.  I had this same problem of six months; but was able to talk to technical support services because the printer was still under warranty.  They have solved the problem without delay.  The warranty expired 4/2015, so I'm unable to speak to a representative of Tech and unfortunately, I don't remember what the rep done to solve the problem.  Can anyone help?

  Thanks for the quick response.  I followed all of your suggestions and unfortunately I had to replace the black cartridge.  Nothing else has worked.  Does not explain why for the old cartridge ink levels showed as complete but does not print.  Hope this doesn't continue to happen with HP 61 cartridge.  Thanks again.  I appreciate your help.

• customize the login screen

  I would like to customize the login screen of LCM with my logo and modify the borders of default blue of another color. How can I do this?

  I also want to change the blue border by default in the main window after you connect also. I worked on how to do this with custom CSS, but I don't see where, on the file system, I can download my images customized for after their SEO in CSS

  Once again with something 'not so easy' do or describe...

  • Open your vCenter Orchestrator Client and connect with admin rights

  • Select Webviews in the left pane

  • Select VMware Lifecycle Manager - right click and choose not to publish

  • Click the items tab in the right pane (it will take a while to load up)

  • Click on the "Export to link directory.

  • When you are prompted, export to a folder named c:\lifecycle (just keep simple here... you will first need to create the folder)

  • Then, copy your logo to c:\lifecycle\images file

  • Then, edit the file c:\lifecycle\css\login.css

  • You need to add the following lines: (replace with the HEX color appropriate code that you want to use. For example, RED is FF0000. Also, replace YOURLOGO.jpg with your file name real logo that you copied in the pictures folder.)

  / * Insert these lines at the bottom of your login.css file * /.

  / * Change the upper part of the box color * /.

  body.loginPage #sectionHeader

  / * Change the colors of line left/right and add the logo * /.

  body.loginPage #main

  / * Change the color of the box background * /.

  body.loginPage #footer

  / * End of the login.css changes * /.

  Now, he must submit these changes to your LCM server:

  • Return to your vCenter Orchestrator Client (either still on the same screen as the directory link to earlier export)

  • Click the "import directory.

  • Specify "C:\lifecycle" as the file name and click Import

  • At the confirmation prompt, click Import

  • At the bottom of the window, click on save and close

  • Now publish the webview (green play in the toolbar button OR click with the right button on the Web view and select publish)

  If everything was done correctly, you should see something a little more customized in appearance when you visit http://yourLCMServer:8280/vmo/lifecycle and invited for the connection.

  Visit me on http://www.vcoteam.info for vCenter Orchestrator tips and tutorials

• How can I customize the Thunderbird message columns to show the raw sender address (not the full name) and e-mail address "received for" which was used to reach me?

  I find more and more important to be able to see the actual email address of the sender rather than just displaying the name, because they do not usually show a company name - a domain would always be. Is it possible to customize the settings/write a file of script/tweak to add columns of name email & domain raw? When dealing with a number of people from the same company, it is difficult to order or nod thanks to a list of emails to find. I know also that 2 people with the same name to different companies and it is impossible to distinguish.

  Secondly, as an addition of associated column, since a number of e-mail aliases join it would be useful to have a column to display the "received for" part of the source of the message that reveals the real enamel used in the To/CC/BCC, which led to me. Once again can it be twisted or scripted?

  I have programming experience but did not Add ons, and would be open to a proposal which is to create a custom module if adding columns with custom values is possible like this.

  Best regards

  Drew

  This module help you?

  https://addons.Mozilla.org/en-us/Thunderbird/addon/show-address-only/

• I'm trying to get the bookmark icon in my toolbar to the right of the icon of the House. I right click on the toolbar, and then customize the icon is displayed in the toolbar. When I close the popup on the toolbar icon in my toolbar disappears.

  I'm trying to get the bookmark icon in my toolbar to the right of the icon of the House. Then, right-click on the toolbar and then click Customize the icon in the toolbar. As soon as I close the pop of toolbar Customize the icon on my toolbar disappears. How can I get the Favorites icon to stay on my toolbar to the right of the icon of the House?

  Two things can cause the Bookmarks button to "disappear" from the Navigation bar when the customization mode is closed.

  1. the Menu bar - with File, Edit, View, etc. - shows.
  
  Since you have checked the answer first of cor-el solve your problem, I have not exposed on this point.

  2. the bookmarks toolbar shows, and this button is this toolbar.

  Is the Menu bar showing or not?
  
  Have you tried the reset bar of tools and commands that I mentioned?