CVI visual studio printf


Hello pblanco!

Since you're using an external compiler, such as Microsoft Visual Studio, the following KB applies:

http://digital.NI.com/public.nsf/WebSearch/862567530005F09C862565BB005FA610

According to the document, you use FmtOut() to print to the redirect i/o standard. #include to use this function.

Best regards!

-Johannes

Tags: NI Software

Similar Questions

  • An error occurred when creating a project in Visual Studio 2010 & 2012 CVI

    While creating a VS2010 project, with CVI 2012 installation. I get this error after attempting to convert or create a project of the CVI. The CVI dialog box has also no details.

    The error is going on after the installation of SP1 for Visual Studio 2010

  • Run the CVI in Visual Studio code

    Hello world

    I tried to get a CVI code to run in Visual Studio using this guide (http://zone.ni.com/reference/en-XX/help/370051V-01/cvi/usermanual/prjbldmenuextcomplrspt/). So far I've managed. However, I was faced with a non-fatal errors. Apparently, Visual Studio is not following them. Also, fatal errors do not produce a meaningful error message. Is there a way to get these error messages from inside Visual Studio? Maybe there is that an event reminder/whichI can use.

    Thanks in advance.

    The feature you describe is called "user protection". In addition to reporting the pop-up windows error codes, it also warns you if you access an invalid memory, data types to pass to functions that expect different data types, detects local variables uninitialized, etc...

    Unfortunately, the protection of users only works for programs built in debug mode using the CVI compiler. If you generate your source code in Visual Studio, the compiler VC injects not the information necessary to protect the user from working.

    The only way you could get this works in Visual Studio would be if you could somehow isolate all your CVI code in some DLL that build you with CVI, then call this DLL from the rest of your program, what you have created with Visual Studio.

    Luis

  • How can I convert a LabWindows/CVI 2010 project to a Visual Studio 2011 project?

    I have a good size project, 12 source files, headers 14, 1 uir, I want to be able to edit and compile in MS Visual Studio 2011, MSVC ++.

    I remember that we tell him that LabWindows dropped support for C++ in 2008 and is more had a wizard to convert projects. I know that I can follow the path of the DLL, but I have never created a DLL before and don't know where to start with it. What would be the best way to go about this conversion?

    CVI 2010 always supports the Assistant Conversion of Visual Studio to Visual Studio 2005/2008. We are not planning to add support for VS 2010 in a later version.

    If you need a project to VS 2010 now, you can use the Visual Studio 2008 conversion wizard, and then upgrade the project VS 2008 for VS 2010.

  • Where are the models of 'New project' when you use Visual Studio with labwindows/cvi 2013 2012?

    Background:

    Platform: windows 7 X 64

    Visual Studio 2012

    LabWindows/cvi 2013

    First install Visual Studio 2012.  Then follow this installation Labwindows 2013.  In the installation options, I check 'visual studio 2010' (there is no option for VS2012).

    Question: After the installation of Labwindows, I expect to see patterns added to the "New project" dialog box in Visual Studio.   For several years I used labwindows.  Changed the method for using Labwindows with visual studio?

    Thanks in advance for any help.

    Hello jsut64,

    Unfortunately, there is no option to integrate with Visual Studio 2012 yet LabWindows/CVI. We plan to add in a future release.

    Best regards

    = Nelu F. | National Instruments.

  • Visual Studio error after installation of the CVI

    Ladies and gentlemen,

    After the installation of CVI (current version), I've got strange message in Microsoft Visual Studio 2005 (appeared every time when I build the solution, for example, by pressing Ctrl + Shift + B):

    I have no integration with CVI in Visual Studio - but where can I turn this off (without uninstalling CVI, of course)?

    Unable to find this in the preferences...

    Andrey.

    Hello-

    To remove the integration of Visual Studio, you must go through Add/Remove programs.  In Add/Remove Programs, select software National instruments, click Uninstall/change.  In the "National Instruments software" later dialog that appears, choose your latest version of LabWindows/CVI and select Edit:

    Then displays the LabWindows/CVI Installer dialog box.  Once it done, choose the Visual Studio 2005 wizards and select Remove:

    Sorry for the inconvenience - let me know if this does not fix things for you.

    NickB

    National Instruments

  • Visual Studio 2008 with Labview order, use of PlotWaveform commando

    Hello

    I want to use the Labview/CVI following commando: PlotWaveform in Visual Studio 2008.

    But I get a return-10 error when I try to use PlotWaveform.

    I use the following code:

    #include "stdafx.h".
    #include
    #include
    #include
    #include
    #include
    #include
    #include
    If (InitCVIRTE (0, 0,0) == 0)
    Returns - 1; Not enough memory

    int panelHandle is NewPanel(parentPanel,"Graph",top,left,height,with);.
    printf ("panelHandle: %d\n",panelHandle); ")

    int nNewCtrl is NewCtrl(panelHandle,CTRL_NUMERIC,0,10,10);.
    printf ("nNewCtrl: %d\n",nNewCtrl); ")

    DisplayPanel (panelHandle);

    int PlotWaveform_RETURN_VALUE = PlotWaveform (panelHandle, nNewCtrl, myArray, 4, VAL_DOUBLE, 1.0, 0.0, 0.0, 1.0, VAL_FAT_LINE, VAL_DOTTED_SOLID_SQUARE, VAL_SOLID, 1, VAL_RED);
    printf ("PlotWaveform_RETURN_VALUE: %d\n",PlotWaveform_RETURN_VALUE); ")

    RefreshGraph (panelHandle, nNewCtrl);

    When I run the program is the result:
    panelHandle: 1
    nNewCtrl: 2
    PlotWaveform_RETURN_VALUE:-10

    I get a graphic image but no graphics. And the frame that displays is not working properly.

    What is the problem with the function PlotWaveform, what is him Error-10 show ?

    BR
    Benjamin

    Benjamin,

    This error means that you place an order for wrong type for the function in question. And that's because you create a control of type CTRL_NUMERIC instead of CTRL_GRAPH or CTRL_GRAPH_LS.

    Luis

  • Lack of Visual studio 2005 console

    I just tried to convert my cvi application to compile with visual studio 2005, the conversion of the CVI 9.0 Wizard. It seems to work in the sense that it interacts with my application labview correctly but the console is not displayed. Is there a setting in visual studio to make appear the my console?

    Thank you

    in Visual Studio 2005, open the project properties (menu "Project/properties" or right click on the project name in the Solution Explorer should be and select 'Properties' from the context menu). in the tree view in the left pane, select ' Configuration Properties/Linker/System '. on the right pane, the first option is "Subsystem": select the value "Console" to have a console appears, or "Windows", if you do not want a console.

  • How keep put format while pasting code from Visual Studio in Thunderbird?

    Hello

    Often I am copying and pasting the code snippets in Visual Studio in Thunderbird. Problem is that doing this directly does not preserve the formatting.

    Workaround 1 - works very well but it is slow (lots of copy/paste)
    Copy from Visual Studio. Paste in MS Word. Copy from MS Word. Paste it into Thunderbird.

    Solution 2 - quick, but the result is not so nice (in terms of formatting of the c# code)
    Use "pasteCode" add-on.

    Is there a better way?

    Thanks for any suggestions,
    -Alex

    In fact, "Productivity Power Tools" extensions of Microsoft adds HTML to the Clipboard automatically when you copy:

    Blog post with more information from a previous version: http://blogs.msdn.com/b/kirillosenkov/archive/2010/06/07/copy-code-in-html-format-with-visual-studio-2010.aspx

  • Re: Cannot install Visual Studio 2008 on Vista 32-bit

    Hello

    I have a satellite P200 with Vista Home premium SP1 and I need to install it on Visual Studio 2008.
    When the install wizzard starts it checks the compatibility of the computer and could not return this:

    "Setup has detected that this computer does not meet the requirements to install this software. These conditions must be met before you can install Microsoft Visual Studio 2008 Professional Edition - ENU
    Requirements and software prerequisites
    Windows XP Service Pack 2 update information
    You must install this service pack to complete the installation. Visual Studio requires the installation of this service pack before you install Visual Studio"

    So the only solution I have is to exit the installation wizard, so I can not install VS2008

    It seems that someone else has the same problem with a Toshiba Satellite also! See http://forums.microsoft.com/MSDN-FR/ShowPost.aspx?PostID=3392455&SiteID=12
    Microsoft product support has apparently no solution and find it strange!

    So please help me, I absolutely need of VS2008 to work and I change my laptop only because failed to install VS2008

    Thanks a ton in advance for

    Pascal

    Post edited by: pfo69

    Hi mate,

    Sorry, but just because one person in a MSDN forum has randomly the same machine you, does not mean that there is a related problem of the machine. Technically in comparing it s absolutely the same material as in an office and so why Don t you contact Microsoft technical support?

    It seems that it is certainly unwanted Microsoft and has NOTHING to do with Toshiba hardware or software, so please see MS support sites or give them a call, because it s THEIR software which won´t operate according to THEIR operating system.

    Welcome them

  • PC laptop Pavilion 15: freezing boot screen after installing Visual Studio 2015

    Hi all

    I have a problem on my laptop which is the startup screen freezing after installing Hyper-V on Windows Pro 8.1. Actully I need because it is used by Visual Studio 2015 do Andriod device emulator work

    After a search internet I found that this problem is caused by the driver Ralink Bluetooth and common

    I'm also thinking that I can boot windows successfully when I disable virtualization BIOS, so I logged on windows and I have tried a few solutions

    1. Disable Bluetooth device-> does not

    2 - Install the latest Ralink driver-> does not

    3. Remove VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00-> work but the returned key after that restart so I have to delete this key, everytime I open windows, and more that's a problem with virtual switches on Hyper-V

    Any solution permanent please?

    Hello

    Which driver Ralink, have you tried?

    I discovered Mediatek drivers which are no longer updated.

    Not sure if that helps in your case with Visual Studio.

    Here is the link:

    FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71572.exe

  • Support for Visual Studio 2012

    Hello

    Measurement Studio 2012 is compatible with the newly released Visual Studio 2012 (is no longer in beta as of this post)?  Thank you for any information you can provide!

    -Eric

    Hello EricJay,

    Great question! Measurement Studio 2012 is not compatible with the recent 2012 Visual Studio. It is the main priority for the next release.

  • Control CWAI crashes Visual Studio

    I try to read analog data from a card PCI-MIO-16-1 and OR-DAQ 7.5 installed. I want to use the old driver, because that's what my other software uses. When I go into Visual Studio (Express 2015) and add the CWAI control to the Toolbox, and then add it to the Visual Studio form hangs shortly after. The version of the control CWAI is 1.4. I try to use the free control that comes with the NOR-DAQ driver. What causes Visual Studio to crash?

    GP14 wrote:

    I try to read analog data from a card PCI-MIO-16-1 and OR-DAQ 7.5 installed. I want to use the old driver, because that's what my other software uses. When I go into Visual Studio (Express 2015) and add the CWAI control to the Toolbox, and then add it to the Visual Studio form hangs shortly after. The version of the control CWAI is 1.4. I try to use the free control that comes with the NOR-DAQ driver. What causes Visual Studio to crash?

    Bothering you check NOR-DAQ 7.5 is compatible with Visual Studio 2015 and the version of Windows you are using?

  • DAQmx QAnywhere (Visual Studio 2010/Windows 7)

    Hello

    I'm under Visual Studio 2010/Windows 7 and I installed the software driver OR DAQmx 9.2.2. The installer doesn't install the .NET API reference, even though I checked it in the Installer (it creates a dead link). How to access the reference of the .NET API? It is available online?

    This page answered my question of VS2003, VS2005 and VS2008, but what about VS2010?

    Hi mola.

    Visual Studio 2010 support added in NOR-DAQmx 9.2.3, so I expect to install a copy of the API reference that works with VS2010. However, to develop programs DAQmx with VS2010, so perhaps you need to one of the workarounds described in this thread: VS2010 crashes with BSOD when target framework changes

    Brad

  • How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit

    Hello

    How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit?

    I'm transferring a 32-bit application on 64-bit.  In visual Studio, I added the 64-bit project configuration.  He compiled the source very well but the reports link errors:

    error LNK2019: unresolved external symbol DAQmxReadAnalogF64 referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
    error LNK2019: unresolved external symbol DAQmxCreateAIVoltageChan referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
    error LNK2019: unresolved external symbol DAQmxReadDigitalLines referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
    error LNK2019: unresolved external symbol DAQmxCreateDIChan referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
    error LNK2019: unresolved external symbol DAQmxWriteDigitalLines referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj
    error LNK2019: unresolved external symbol DAQmxCreateDOChan referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj

    These, of course, are the functions OR that I use.  The NIDAQmx.lib has been added to the Input of the link property.

    Any help would be appreciated.

    Thank you

    -Neil shore

    Hi LaserShore,

    Think you that you added the 64-bit platform settings target according to this page? : http://zone.ni.com/reference/en-XX/help/372636F-01/mstudiowebhelp/html/64bitcore/

    Already running 32-bit application? Have you changed references to the 64-bit version?

    You use Measurement Studio? If so some features are not supported with 64 bit.

    Also when you say that you have added the NIDAQmx.lib, did you follow this KB:http://digital.ni.com/public.nsf/allkb/38F67B28D995C6958625706E000C580C

Maybe you are looking for