"Cyclic redundancy error" when burning a rewritable CD (CD - RW)

Similar Questions

• No matter how much hard drive space or size is not displayed. It says hard drive is not accessible and the cyclic redundancy error.

  * Original title: hard drive problem

  No matter how much hard drive space or size is not displayed. It says hard drive is not accessible and the cyclic redundancy error. When I try to format it, it says windows could not finish.

  What just happened? How can I solve this problem?

  It says hard drive is not accessible and the cyclic redundancy error. How can I solve this problem?

  Sorry, you can not. A CRC error means that there is a serious problem with your drive. You need to replace it.

• Problem with burning Audio files to a blank CD error "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"

  I recently burned music CD blank so I can enjoy some songs in the car. After that a few discs engraved with success, I received the message "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"when trying to burn audio. To see if it was the m drive, I tried to burn audio files to four separate discs and each of them had the error message. The discs are brand new and have no information on them. I do something wrong or is my burner disconnected? Thanks for all your help and your support! I hope that we can find the cause of this problem so I can continue to make the CDs.

  Consumers concerned,

  Cody bridges

  Could you also confirm that it is playing the discs ok?

  Run the sfc tool and see if it shows anything... instructions here.

  http://support.Microsoft.com/kb/929833/en-us

• Error message "windows media Player encountered an error when burning music" when burning audio

  Original title: try to burn an audio cd in windows media player-it begins but does not end the process. Help, please!

  try to burn an audio cd in windows media player. It prepares the ways, but when it is time actually burn the tracks, it fills all tracks very quickly and finalize. then the message appears that windows media player has encountered an error when burning music or that the burner is busy and to wait for the current task to finish. using an external burner, but it is properly plugged in and have not had any problems until recently. any suggestions would be greatly appreciated.

  Hi Ron,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, you are having problems with the error message"windows media Player encountered an error when burning music"when burning audio CDs.

  Method 1: Use the Troubleshoot utility to see if that fixes the problem.

  a. open the Troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, and then click Panel.

  (b) in the search box, type "Troubleshooting" and then click on troubleshooting.

  c. click on show alland then click the Windows Media Player settings.

  Method 2: Select a recording speed (write) more slow for the CD burner.

  Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Method 3: If you have any third-party burning software, I suggest you temporarily Uninstall it and then try to burn the disc using Windows Media Player.

  Note: Reinstall the software after the trial.

  Answer to us if you are having problems with burning audio disc or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• I get "error data. Cyclic redundancy check"when I try to initialize the external hard drive.

  Original title: data error. Cyclic redundancy check

  I have a USB external hard disk which is used to work. Now, it appears as not initialized. When I try to initialize the disk I get "data error. How can cyclic redundancy check"I solve this problem and access the files already on the disc?

  Hello

  1. don't you make changes to your computer before the problem?

  Follow these methods and see if the problem still occurs.

  Method 1

  I suggest that you check the status of the drive using the disk management and reassign the drive letter, check if it helps.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Method 2

  If the previous step fails then I would suggest that you back up data on an another external drive with other computers and later format the drive on the Windows 7 laptop and check if that helps.

  Create and format a hard disk partition
  http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

• On Windows update kb2229593 cyclic redundancy error

  I am trying to install the update of security KB2229593 on a Win XP Home Edition PC.  I got an error that the update could not be installed, so I downloaded the update from the MSFT Download Center.  When I run it, I get an error saying "data error (cyclic redundancy check) I am assuming that it is a fairly major update.  Any ideas?

  Hey Pa Bear.

  I ran the disk check, and it seemed to solve all problems!  My security updates have been completed.  I really appreciate your help, but I think that chkdsk has been the answer.  Detective Conan for me.  Thank you again for taking the time to respond and offer to help.

• control of cyclic redundancy check when you try to install the specific disk

  I installed it now mainly music programs of this pile of disc of times with no probs, I get the error message "data error (cyclic redundancy check)" on all the programs on this disc, when I put the disc in the drive of my pc seems to be a bit slower than normal too. one of the programs is fruityloops 8, if I click on install, but click on fruityloops 8 engine I get ' ZipMsgXX.res is probably not related to the executable string ID missing is 11036' as I have 6 fruity, I thought that it could install using Installer 6 fruity but it wont... someone help...

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://support.Microsoft.com/kb/822798

  Also check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/data-error-cyclic-redundancy-check-and-disc-is-not/76989c0f-E06C-E011-8dfc-68b599b31bf5

  It will be useful.

• Sims 3 download error, cyclic redundancy error!

  I am trying to download the sims 3 late at night, he will get about 98% finished & then an error pops up. Every time! It is said of cyclic redundancy... I did everything site Web EA told me to do and nothing works. Any help?

  Hello

  1. How do you try to download the game?

  2. you download from the Web site or that you try to install via a CD/DVD?

  If you use a CD or DVD to install the game, this error occurs when your computer fails to read some of the content on the CD/DVD it needs to install the game.

  Main reasons for this error on CD/DVD, it's that your drive needs a quick cleaning. It could also be that the CD/DVD is scratched then upwards that the drive cannot read the disc.

  I also suggest you to perform a disk defragmentation and check.

  Improve performance by defragmenting your hard drive

  http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

  Try to install the game and check.

  If the problem persists, provide us with more information so that we are able to help you the best.

• Unspecified error when burning DVDs with windows media player DVD is empty when starting get coded, then when control burn error occurs and does not burn the disk. How to fix this?

  I get an error when I burn DVDs with windows media player. He asked correctly when I lad the DVDs that I choose to burn a dvd disc. Then I add my video fles she adds and lists. Then I hit burn and it starts to create the dvd disc. All my files are wmv files. The bar regarding % moves to 100% but captured along with burning the disc, he rejected and I get an unspecified error message. with just a button to hit, which will close the error box. The files don't burn the disk accordingly. The disc remains empty.

  Hi N2tjq,

  Are a. When you facing this problem?

  B. is - what happens with all DVDs?

  C. recent changes made on the computer?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1 back to adding photos and video to the DVD page and then click on Options.
  2. in the DVD burner speed box, select medium or slow.
   
  Change-Windows-DVD-Maker-DVD-Video-settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".
  http://support.Microsoft.com/kb/949281 
   
  For more information, please see the links below:

  Burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with "unknown error" when burning DVD

  I'm having problems to burn a DVD after manufacturing and save the file to Windows Live Movie maker, I am trying to burn the DVD and it takes forever to get to 83,0% and stops before burning.  99%, stops the burn and I get an unspecified error.  I'm not very technical, trying to correct this error, please do it fast and easy for fix me!  Thank you

  Hi Ronda, P

  Welcome to the Microsoft answers site!

  (a) edition of windows vista you run on the computer?

  (b) how exactly you are trying to burn the DVD? What file format you are using?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1. return to the page Add images and videos on the DVD and then click on Options.

  2. in the DVD burning speed box, select medium or slow.

  Change-Windows-DVD-Maker-DVD-Video-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".

  http://support.Microsoft.com/kb/949281

   

  For more information, please see the links below:

  Burn a DVD video disc

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PrimoSDK unknown error when burning disk

  Hello

  Yet CS6. I have the record of generation a DVD with my stuff. Then I try to still use to burn the DVD. Immediately after I started this process, I get "Unknown error PromoSDK" yet.

  I tried to use Windows 7 to burn the disc - it strives to burn, but when I try albums look in my DVD player, it is recognized as a "data disc" and that it is not played.

  I also tried to burn an ISO, but I Don t understand how it works - what to write to the disc? My DVD player does not recognize this.

  May be several problems here, combined with my limited knowledge - hope someone can help with one or all the problems!

  Thanks in advance!

  Håkan

  1, can help to the tutorial in the #3 http://forums.adobe.com/message/2276578 message list, with more help in the message #5

  -close to the bottom of page 3 there is a section on learning yet

  2nd, the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO disk (send the author a PayPal donation if you like his program)

• accident or error when burning

  Hi all

  With the help of PRE8.  He worked much for Burns in the first bit, now I've added a new disc menu (general - grid) and some markers memnu.

  Now when I go to burn a disc... when he gets to the part where it burns actually on the DVD it says device is not... or something to that effect.  Just tried again and all crashed.  Strangely enough, it's worked sound for these days.

  Help

  Thank you

  He has had the same error towards the end.

  This could indicate that there is a problem with your HARD disk (hard drive), as it is too full to write the necessary files (remember, that just needs a lot more room to work, pre size files to be written on the DVD). How much defragmented free space is available on your HARD drive?

  If you can not burn on the record, something else happens. We must tackle first.

  Good luck

  Hunt

• Qosmio F60 - error when burning Blu - ray discs

  I have a Qosmio F60

  Recently, I tried to burn my data on BD - R 25 gb disc. Aftre burn about 6 GB of data, it stopped burning with unexplained error. I tried another disc with the same problem. This time the suggested message updated firmware. This is MY * A BD - MLT uj240ES blue ray player. I am unable to find any updated firmware update. Current firmware is version 1.10.

  Can someone help me on this

  Hey,.

  If a firmware update is available, you can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  If this isn't the case, you already have the latest version of the firmware.

  In your case, I recommend to test different brands of blu - ray discs. I have good experiences with Verbatim and TDK discs.
  Check this box!

  By the way: I prefer a backup of the data on an external HARD drive. It of safer and easier! ;)

• Error when burning a DVD DVD Maker - "impossible to crΘer the cataleptic failure of dvd.

  Original title: Windows DVD maker
  I get the error (failed to create the cataleptic failure of dvd)

  Hello

  I suggest that you try reducing the burn speed in the creation of DVD and check if it works.
  Choose a speed slower burn to your DVD recorder as follows:

  1. return to the page Add images and videos on the DVD and then click onOptions.
  2. in the DVD burning speed box, selectmedium orslow.

  Also, make sure that you save the movie on the computer and try to burn it.
  If the previous step fails, then I suggest that you uninstall any third-party DVD burning software from the computer and check if it works.

  Solve problems with creating a DVD-video using Windows DVD creation
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Change Windows DVD Maker DVD-Video settings:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Burn a DVD-video disc:
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't acess my external hard drive. He dsplay cyclic redundancy error. How can I solve this problem?

  How can I solve "error cyclic redunduncy ' to access my external hard drive.

  Make a right click on it > properties > tools > Error Checking > check both boxes and let it scan