D30 does not start after adding drives to the UCS ports

Hi all

I have a Lenovo D30 workstation.

I have my SSD on sata RED ports, and port orange is the DVD unit. So far so good.

I added 4 drives, connected to the blue sata ports (reader1 4) while the system worked. I launched rest Intel and created a RAID5 volume. All work of until reboot. At the power, I'm looking to a flashing cursor, just after the message 'press enter to...'. In the BIOS I have excluded from the disk 1 to 5 ports such as boot (on 3 different from the menu) device.

If I take the readers the system starts. After you add the I have to go back to the RAID and also workt fine. But I don't want to recreate the RAID unit after each reboot.

I made a rookie mistake?

Hello

Type: 4354

The machine is in UEFI

The option does not appear in the BIOS post screen, however, if you press CTRL-I during post, then the rest option appears. It shows the right RAID config and all 4 disks are visible.

Discs: 4 x HGST 7K 1000

Note: This is the drives 2.5 ". I use a 4 Bay of Startech unit to mount in a 5.25 Bay in the system.

http://www.StarTech.com/nl/en/HDD/mobile-racks/4-drive-25in-removable-SAS-SATA-mobile-rack-backplane...

The bootdrive is a Samsung 850, 500GB connected to the SATA0 port.

The system didn't need to start fron all the RAID, but only from the SSD.

Edit: I deleted the RAID for the rest for the post. Created a RAID5 set and restarted the D30.

Guess what... it starts as expected. The RAID5 volume present in the W10 and works very well.

What is the difference in the creation of a whole in the rest menu during post and create one of in W10 RAID?

Tags: ThinkStation

Similar Questions

  • Re: Satellite L30 does not start after adding another stick of 1 GB memory

    I bought 1 GB PC4200 533 MHZ DDR2 SODIMM memory module for my Toshiba Satellite L30 - 10v (PSL33E) to make it 2 GB. After you have added the 1 GB modules Satellite L30 wouldn't start. With only 1 GB, that it starts ok, with the other 1 GB origianal only boots ok. (The two modules are ZCE6 430 - K4T1G163QB Samsung 1 GB PC4200 533 MHZ DDR2)

    The two modules of 1 GB boot not together. I noticed that many others have had this problem. (please see
    This [t-22984]. post)
    On this forum, someone bought the CT12864AC53E memory module which works, however I can't find this on the site of Crucial.
    I've heard other purchase the sticks of memory CT572238 and CT572234 and have the same problems.

    Memory Advisor says determinative buy the CT572234 memory sticks.

    I have also updated the bios to V3.10, still does not start with the two modules.

    I'm ready to buy 2 new modules, but what 2x1GB memory works?
    Any help would be greatly appreciated...

    Post edited by: quigs1969

    > 1 GB strips boot not together. I noticed that many others have had this problem.

    For me it s case;
    The two modules don't work together
    Seems the modules are not compatible there is only one solution. Replacement of RAM!

    Try other RAM modules.
    I bought a few modules from Kingston and made good experience

  • Help my pc does not start after you have uninstalled the video driver

    Please help my pc usually start more after I uninstall my nvidia driver mx/mx 400 with YourUninstaller I try to use this option to uninstall my driver in super mode then prompt YourUninstaller and asked "do you want to restart your computer now" then I click Yes but YourUninstaller software now on the race because the YourUninstaller has finished remove the registry left behind by uninstalling normal after that there is no register found after scanned. Then I click Next, then I closed this request. Then I restart my computer manually but blocked windows then I wait 5 or 10 minutes, but do not restart Windows. I turn off my APR, then I turn on my pc then windows does not start. I try to reformat but it's the same story that windows does not start. I try to remove the cmos battery hoping it will solve then it works. But the problem is that I insert my bootable cd, it runs automatically even I don't not press a key on the keyboard, the process to continue installing windows, it sounds I can not install my windows correctly. When he restrart the process goes again to load all the drivers everywhere why did this happen? Is there something wrong with my HARD drive once I used YourUninstaller?

    RAM of a problem with you, I guess. Remove the RAM and clean including the slot of the motherboard.

    http://www.computerhope.com/beep.htm

    If this post answers your question, click mark as answer .

  • SRM does not start after you have moved the database

    We're under 4.1 SRM and moved its sql database to a new server sql (new server sql a different host name).  We moved successfully to the virtual center & Manager Update bases sql data, but after moving srm4.1 database, the srm service does not start...

    so far, I uninstalled SRM (DO NOT remove the SRM database)... After uninstalling SRM, I rebooted the server.  Then I have re-directed the SRM installation and started going through the installation of MRS... After pointing the SRM installed on the server vcenter, port 80, and pointing to an existing sql database, etc., I get a thumbnail of certificate message and a prompt on the creation of a new certificate, which i say 'yes' to... Installation continued on and arrived at the end when it says "create certificate"... then does not say "cannot install the certificate...". Database error has occurred. "At this point, the installation failed

    Any ideas on how to remove the old certificate or work around this error?

    Thank you

    I think the error message is misleading in this case and the problem is not related to the certificate.

    I still think that it is permission DB / configuration number.

    Following links may be useful:

    http://communities.VMware.com/thread/212157

    http:// http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1015883

    Michael.

  • Is it possible to disable or remove an add-on from the outside of the FF (it does not start after adding an addon)

    I installed the addon and now FF won't start and seems to be a loop. Is it possible to uninstall the addon or configure FF so that it starts with disabled addons? Don't forget that FF does not at all so I don't have access to one of the internal functions.

    Release the FF is 17.0.1, on Windiows XP/SP3

    In addition, as soon as I did this, I would have the addon added to the red list.

    Open Firefox in Safe Mode diagnosis by holding down the SHIFT key when you start Firefox. Firefox will start with Extensions and some other things off. When done with the Safe Mode, the release of Firefox, wait a few seconds and click the Firefox desktop icon to start Firefox in normal mode.

    More info on who and by removing manually extensions, if any, included in the following articles:

    Additional follow-up questions:

    • Name of the add-on?
    • Link to which you downloaded the add-on?
    • Was this a separate application? If Yes, have you looked in Control Panel > add or remove programs (or programs and features) to see if it is listed and remove from there?
  • Satellite Pro A60 EN does not start after you have used the recovery CD - isapnp.sys missing or damaged

    Help am stuck with it.

    Necessary to perform a recovery on the laptop and used the recovery CD 2 they seem to work OK. No error during installation, but after that they finished and it restarts didn't get the following message.

    Windows could not start because the following file is missing or corrupt:
    System32\drivers\isapnp.sys

    You can attempt to repair this file... etc but I don't have any original installation CD all have is the recovery for the Toshiba.

    I have a setup of Windows XP for the PC disk, but when I try to run which, but it starts just the configuration. Setup is loading files and after the kernel debugger get error

    "File ntkrnlmp.exe could not be loaded.
    The error code is 4, sometimes it's 7.

    I tried to delete and recreate and formatting partitions, so I can see and I can copy a file to the C: drive

    So any suggestions as to what wrong here

    Thank you very much

    I put t know if this Microsoft Knowledge base article would be useful for you, but you should check it out.

    [You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup | http://support.microsoft.com/kb/315311]

    Microsoft has a solution, and I would like to know if you can solve this problem by following the steps of the solution described in the article.

    Feedback would be much appreciated

  • Bootcamp does not start after you have created the new partition

    Hi, I accidentally created a new partition on my mac OSX 10.11 and then discovered that my bootcamp would not start. After that, I deleted the partition but the disk for the BOOTCAMP partition identifier was disk0s5 instead of disk0s4. is anyway to fix this?

    Thanks in advance.

    The disc is now disk0s4, but when I try to boot in bootcamp, it says no bootable disc detected

  • Partition Windows 10 does not start after you have created the new internal drive

    I'm running OS X 10.11.2.

    I have set up a training camp 10 Windows on my Macbook Pro sometime ago, but today I realized that I need more storage. I watched how do so online and came across this thread:How to resize my bootcamp partition without deleting chtol. I followed the instructions, but could not know how do I find my Windows partition.

    So I think that I have the problem described here: repair Boot Camp after having created the new partition. I did what Christopher Murphy described on the first page and this error message appeared when I pressed "w ":

    "Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Writing of abandonment! »

    I deleted from the extra without internal hard drive name in the hope that he'll fix it, but it didn't.

    I would like to enlarge my Windows partition, but at this point, as long as I can access my Windows Bootcamp partition, that would be great!

    EDIT: I unfortunately do not back to the time Machine.

    Resizing Windows partitions is not officially supported by Apple - Boot Camp: resize the Windows partition .

    Please after the release of

    diskutil list

    Cs diskutil list

    sudo TPG - vv - r see the/dev/disk0

    sudo fdisk/dev/disk0

  • Samsung S3520 does not start after that I changed the screen he wants more F2 or F4

    F2 TO SET UP

    AND

    F4 FOR RECOVERY

    BUT F4 DOES NOTHING

    AND F2

    THIS LAPTOP HAS WINDOWS 7 SUPPORT AND WORKED PERFECTLY UNTIL MY BROKEN SCREEN

    NOW THE SCREEN IS BACK WORKING I CAN'T BOOT MY LAPTOP

    ANYONE HAS ANY IDEAS PLEASE?

    Hello

    Thank you for the update.

    I suggest you run bootrec commands and check.
    Reference:
    Use Bootrec.exe in the WINRE to resolve startup problems
    https://support.Microsoft.com/en-us/KB/927392

    You can create the media to install Windows 7 from this link:
    https://www.Microsoft.com/en-us/software-download/Windows7

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • Computer does not start after falling, goes to the memory dump to the place

    Computer was hit, begins a boot process but that heads directly to the memory dump.

    Info that I hope is relevant:

    Page_Fault_In_Nonpaged_Area

    Stop: 0 x 00000050 (0XCB900000, 0 x 00000000, 0 x 00000000, 0X8053A923)

    Hello

    · What is the number and the model of the computer?

    Follow the steps from the link and check if it helps: you may receive an error message on a Windows-based computer: "STOP 0 x 00000050" or "STOP 0x0000008e": http://support.microsoft.com/kb/903251

  • Satellite A200 PSAEOE does not start after upgrading memory

    Hi, I am first time here.

    I bought a Toshiba A200 PSAE0E-03J02JDR with 2 GB of RAM. I bought a pair of ram Corsair (2 * 2 GB VS2GSDS667D2). The computer does not start after that I installed the memory. I have intel 945 chipset, which is capable of 4 GB (manual page 1-2). The bios version is 1.8 2007.

    Can anyone help me, please.

    Post edited by: Marian ovidiu

    Hello

    The A200 series supports different chipsets;
    Intel 945 PM
    Intel 945GM
    Intel 943GML

    As far as I know your laptop supports the * 943GML * Intel chipset and the chipset supports 2 GB RAM max.
    Take a look at your laptop s user manual * Page 18.*

    Summer: 4 GB of RAM are not possible, and therefore your laptop does not start.

  • Pavilion dm3-2020eo does not start after change of RAM

    As the topic says my computer does not start after a change of the RAM.

    I've updated 2 x 2 GB 2 x 4 GB DDR3 SO - DIMM 204pins Rams. When I start the computer after installing new RAM does nothing, all I get is a black screen.

    According to the Spec computers, it should be able to take up to 8 GB of DDR3 RAM.

    Can someone help me?

    Thank you
    Leo

    Here's the key:

    We're working on two sockets and one does not at all.

    You have a bad memory module. It happens very rarely, but it's not impossible to get a new stick of bad memory. Get the replaced bad and I think you'll be fine.

  • Z600: computer does not start after the installation of the 5 TB SATA drive

    My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

    Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

  • Computer does not start after running the utility Boot Lenovo.

    Hello
    I replaced the power supply with a CX550M of Corsair, increased memory by exchanging the 4 GB to 8 GB for a 16 GB total, I added a hybrid 2 TB Seagate HDD and all worked fine until yesterday, about 1 month.
    Yesterday, I decided to run all the tests of the Lenovo startup disk and after that I restarted, the computer does not start.
    When I press the power button, the fan starts and it stops after 3 or 4 seconds and nothing happens, the monitor says no signal, I removed the external USB disk and printer, I reoved the second drive and the same thing heppens.
    Any idea what this problem could be? Would it be a bad power supply?
    Thank you

    Mario

    Resolved, I erased the memory CMOS, moved to following ankle boot, back up the cmos.

    Thank you

  • NB200 does not start after the bios - screen black screen with blinking cursor

    Hello

    I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

    I restarted the laptop.

    After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

    I did the following:
    (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
    (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

    An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

    Any help - other options would be greatly appreciated.

    My 1 year of that guarantee has expired a few months back so can't send in for repair.

    Thank you

    Hello

    I doubt that it is a virus.
    Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

    Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
    If this is not possible, then you will need to reinstall new OS.

    Here you can order a recovery disc:
    http://backupmedia.Toshiba.EU/landing.aspx
    Of course you will need an external USB CD/DVD drive

Maybe you are looking for