D530 sff - freezes jacquard blocked screen - ideas?

Similar Questions

• Many problems with my D530 SFF, freezing and black monitor (windows xp operating system)

  First off I want to start by saying that I am a complete noob when it comes to computer repair. But since it wouldn't kill me if I lost the files on my computer and I intend to get a laptop soon, I'm willing to tinker and try to solve the problem with my office on my own. First on my cpu fan had started to get progressively stronger over the years that my HDD approached capacity. And it seemed that the computer can get more hot than the optimal temperature. At the present time, I think the hard drive is completely filled and maybe ultimately causing my problems. Periodicly, I started getting messages that my virtual memory is too low and that the system could make more room. Now I clean a bit and delete files to make more room. A year and a half, this computer has not connected to the internet that last week I hung it and installed a bunch of updates automatically from windows (seemed to run more quiet and cooler). I also deleted bitdefender and malwarebytes and installed Avira. At the beginning everything worked well for a few days (some lag sometimes, but he had been trolling for a while) and that one day I left the system and did things around the House. When I came back my computer was powered down on its own. When I tried to restart led lights up and the fans and cpu but my monitor does not receive a signal. I turned the computer off checked cords, get rid of the dust in the case and that I tried to restart and got the same thing. After that, I pulled the ram and clean the slots and riser and the cd player and I tried to reboot after the installation. If I remember correctly this time the monitor received the signal, but the system froze on the start menu to hp. After that I stopped and restarted the monitor could not receive the signal. At this point, I decided to leave the 'thing' sit overnight and try again in the morning. I have two-way to ram and Board riser with those of d530 my father and got the same results. After about 6 hours or so I started the computer today and was able to start windows, but when I tried to access the control panel the system froze.  Initially, I thought that my graphics card was out, and I read somewhere else that others had similar problems when their processor is out, but the fact that windows started today left me speechless. It seems I can get liked long in the longer boot process I leave my office to sit down. What is an overheating problem?

  Hello:

  Your SFF model has two known issues. The CMT is not the power supply issue.

  1. the power supply explodes and smoke if left unplugged for a long period of time, so do not leave it unplugged. There are videos of this on the internet for your viewing pleasure (say).  I had 2 of them jumping on me. Scares the heck out of you!

  http://www.YouTube.com/watch?v=nHPf6jHdEFg

  More information.

  http://h30499.www3.HP.com/T5/business-PCs-Deskpro-Evo/HP-D530-SFF-power-supply-failure-information/TD-p/1040147

  2. the model is released at the time of counterfeiting capacitor.  The symptoms that you are desribing made the diagnosis of bad capacitors.

  Check the PC for capacitors sealed or curved around the processor and the motherboard in general.

  Here's a good article on who and what to look for. First browse the links on the left and on the right, there are pictures.

  http://badcaps.NET/pages.php?vid=2

  If you have bad capacitors, I would just scrap the PC. IMO not worth fixing - what with the bomb ticking power and everything.

  Get a dc7xxx used on eBay for less than $100.

  Paul

• D530 SFF, cooling problems

  I have a D530 SFF which seems to have cooling problems. I upgraded the processor a 2.66 to a HT No 3.2 and updated the bios and had no problems. Cooling problems begin a week later. The CPU fan has started to become very strong. I used a silver thermal agent to try to cool the processor, but it doesn't seem to work. I have to go back to the old processor. Other than the fan, which I intend to replace, I don't have any other ideas to lower the temperature of the unit. Is there another way to cool the unit? Please let me know if you have any suggestions.

  Mondo7299

  I deleted the floppy drive and inserted the hard drive in this area. He solved the problem.

• block screen by the slide today ' hui / Notification

  I saw the problem on my Iphone 5. The screen was blocked by today ' hui / Notification slide and it may not be closed. I couldn't press any another application and tried to stop but can't always because of blocking screen (today / Notification). How can I close it?

  Try a forced reboot. No data is lost during this procedure. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

• My iPhone freeze with grey screen, then restart only. Subsequently, the Wifi is not available, I have to finish manually restart.

  My iPhone freeze with grey screen, then restart only. Subsequently the Wifi is not available, I have to finish manually restart to be able to use the Wifi. I have restart my internet and network settings, but the problem is still there.

  Hi there Turco911,

  Looks like your screen goes gray and then shuts down its own, and you must manually restart to get the wifi to work again. I save your device in iTunes, then restore it like new and verify that it works.
  
  How to clear your iOS device and then set up as a new device or restore from backups

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself.

  If when restored like new the problem persists, I would ask for your phone service:

  Repair - iPhone Apple Support

  Thank you for using communities of Apple Support, all the best!

• Satellite L405D-11V - freezes and the screen goes black when you watch the video

  OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

  I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

  However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

  Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

  Thank you

  Hey Buddy,

  You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
  What operating system you use on your L405D satellite?

  To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

  In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
  If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

  If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
  Explain your very detailed problem. I think that everything can be clarified then. :)

• Satellite Pro 6000 freezes and the screen is weird random pattern

  Hello

  I recently bought a SP6000 second-hand advertised as having "graphics problems". After 10 minutes or use the laptop freezes and the screen has a strange random pattern all acorss it. The speakers are also a strange hum. I have to stop the laptop and restart.

  I've updated the bios and drivers for card video from the toshiba site, but he always does. Can anyone help?

  Hello

  It's not easy to say why this problem occurs. You have purchased a second hand unit. It is possible that your device has a hardware malfunction, but I can't give you an answer why it is happening. I suppose that temperature increases after 10 min of use.
  Maybe this could be a problem. It could also be a fault of the motherboard. But these are just suggestions. In my opinion, you should ask the service for detailed information.

• Qosimo F25 freezes on startup screen...?

  Help!

  My brand new Qosimo F25 (OK dad bought in the United States for me) freezes on the screen (the one with the small blus of the bars of progression from left to right) Windows startup. It worked yesterday and I used it OK, but today it will not go beyond this page. Sarts in safemode, OK? In the start screen noticed time had shifted before 9hrs? Did a system restore to yesterday. Still no luck.

  Clues. Thank you

  Hello Holly ;)

  Well, it s strange. You upgrade the memory module or you plug in external devices on your device? It would be very interesting to know, if you see exclamation points in Device Manager.
  Please give me a feedback.

  Good bye

• After upgrading the bios to version 2.13 t430u, it freezes at black screen

  Hi all

  After upgrading my lenovo T430u bios to version 2.13 it freezes at a black screen, and windows does not load. My machine has windows 7 Professional and the only way to make it work is to reset the bios settings, but after awhile, it freezes at black screen and windows 7 does not load again and need to reset the settings of the bios once more. Hope someone of you gyus can help me with this since is very frustrating.

  Lenovo has released a BIOS updated for ThinkPad T430u that resolves customer reports of black screen after upgrading the BIOS.

  CHANGES IN THIS VERSION

  Version 2.15

  [Problem resolves]

  -Fixed a problem with the black screen after BIOS update

  -Fixed a problem with the gray screen when turn off Bluetooth in the BIOS Setup

  V2.15 BIOS can be downloaded here: http://support.lenovo.com/us/en/downloads/ds031724

  Thank you

• HP Compaq d530 SFF DIMMs do not recognize. Windows Vista Home Premium 32 bit - BIOS version 02.44

  Hello HP community!

  I recently got a HP Compaq d530 SFF of the company, where I had my work experience.

  Fortunately, I took their offer and took the PC at home, everything was going well until I bought myself some new DIMM from ebuyer.com.

  I again for a fact, the computer must DDR 333 MHz, PC2700 and it must be in DIMM format, so I went and bought 3x1Go modules. A few days later they arrived and I have them inserted in the computer, ensuring that two DIMMs was in blue locations and others (I wanted to keep a 256 MB module to) in the black sites.

  I have re-inserted power cable and tried to boot the PC, he showed me a BIOS message, showing that the amount of memory has changed, since the last boot. Once the configuration is presented, he acknowledged only the 256 MB module. I then turned off the computer, and then remove the 256 MB module, to see what would happen. So, I restarted the PC, and it gave me an error (not shown) tone. To which I then tried (needles) each DIMM different to see if one of them was vice. They are all gave me the same error tone. Since then, I've been running Windows Vista Home Premium, with 1 GB (4x256MB DIMM).

  Maybe someone has a suggestion how to fix this?

  I've already updated the version of the BIOS at 02.44 (later I could find).

  Thanks in advance!

  Yours sincerely Simon Cahill

  Beatsleigher,

  Not all memory is the same, even when picking PC2700. Did you buy non ECC?

  Here is a guide on the configuration of the memory for the D530SSF

• keeps freezing on the screen "Motorola dual core.

  I had my Xoom since it first came out and you think it is still one of the best tablets out there. Unfortunately lately I've noticed that when I go to power it on it will sometimes freeze on the screen "dual core". It is not every time, but more that I love. I wonder if anyone else is having the same problem and if so is there a solution? Thank you

  
  

• Why my screen freezes or blue screen appears in normal mode but not safe modes?

  My monitor quivers at the start and in security mode. PC freezes or blue screen during normal mode but not in safe mode.

  Hello

  If it works, fine, safe mode, start your computer in a clean boot State to eliminate conflicts of third party software and check if the problem persists.

  Note: Follow step 7 to your computer as usual.

  In addition, follow the steps in this article.

  Resolve stop (blue screen) error in Windows 7

• My mouse freezes and my screen becomes bright/dim when I connect my power adapter.

  upgraded from xp to vista home premium.

  with power plugged wire mouse freezes and the screen connects bright/dim. with lead, obv, but its fine. limited to the life of the battery.

  Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.

  If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, starting with the mother/chipset, LAN, Audio, USB, SATA card, drivers, and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7/Vista drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Win 7 Support for Intel 865 G (HP D530 SFF) graphics card

  I recently upgraded my HP/Compaq D530 SFF model (small footprint) Pc in XP - PRO on Win - 7.  The upgrade was easy and went smoothly.  Update Windows automatically updated the driver ADI AC97 Integratd Digital Audio to worm 5.12.1.5410 and the driver Broadcom NetXtreme Gigabit Ethernet to worm. 10.100.0.0, which are listed by HP as Win-Vista certified.

  Unfortunately, it didn't automatically update the driver for the hardware Intel 865 G chipset motherboard graphics.  Instead, it installs a Microsoft "generic" drivers VGA game.  My D530 SFF special is a 2.8 ghz P4 hyperthreading, but according to the HP "Drivers WEB site" (for XP), all versions of the HP D530 has the same graphics hardware. so, my exact submodel should not really matter.

  Windows 7 runs strong (at least as well as XP) on this beautiful little PC.  In three days, it has generated NO 'system' or 'application' error log.  Win-7 notification Center, however, annoyingly tells me everytime I open a program of specific graphics of Win - 7 (even the game of Solitaire) that my video card is running in "software rendering" mode with NO hardware acceleration.  Even the Solitaire game runs very slowly, but it runs without error.  Microsoft "DirectX Diagnostic Utility" indicates that DirectX 11 is running correctly on my PC and it can't find ANY error.  It indicates (as I already knew) that hardware acceleration has been turned off.

  I tried to run HP softpac "sp31335.exe" to load the version "6.14.10.4396 has ' graphics drivers running on this PC when installing XP.  The softpac ends before doing anything with a message that says "Unsupported OS."  Because softpac graphic drivers are supposed to be 'XPDM"consistent, I suspect they will probably work with Win - 7 (even if they are NOT supported by HP and may have some minor problems).  In any case, I would put a "restore point" and give it a whirl.  What I have to lose, because there is NO data or programs installed on this PC (clean install).  In the worst cases, I just reload Win - 7.

  My problem: I can't go to the version "6.14.10.4396 has ' graphics drivers because of Installer softpac (i.e."sp31335.exe").  Is it possible that I can bypass the message 'NOT supported by the OS' and get the graphic drivers to install anyway?

  Update: I solved my problem.  Even if HP has structured its executable program SoftPac (sp31335.exe) so that it will not install the version of graphic XPDM driver 6.14.10.4396 on a HP D530 with Windows 7 operating system, Intel made this driver available on its WEB site and is available for download. ZIP format.

  During a search, however, I found a newer version of the Intel driver and installed.  The Windows DirectX Diagnostics utility reports NO errors and hardware acceleration has been turned on.  In addition, 96 MB of memory is allocated to graphics.  I ran for a good week with graphics performance at least equal to what was previously done under Windows XP.  Data for this download are the following:

  Intel (r) 82865G Graphics Controller (Microsoft Corporation - XDDM)

  Driver provider: Intel Corporation
  Driver version: 6.14.10.4656
  Driver date: 01/08/2006
  ----------------------
  c:\windows\inf\ialmnt5.inf
  C:\Windows\system32\drivers\ialmnt5.sys
  C:\Windows\system32\ialmrnt5.dll
  C:\Windows\system32\ialmdnt5.dll
  C:\Windows\system32\ialmdev5.dll
  C:\Windows\system32\ialmdd5.dll
  C:\Windows\system32\igxpxa32. CPA
  C:\Windows\system32\igxpxa32. VP
  C:\Windows\system32\igxpxk32. VP
  C:\Windows\system32\igxpxs32. VP

  Apparently, Intel provided this driver to Microsoft for inclusion on the installation disk of VISTA to 865G family support (and other).  I extracted the following excerpt:

  Q3: Intel provides drivers for Intel Graphics Media Accelerator 900 (Intel GMA 900) WDDM on platforms based on the Intel 915 Express chipsets?

  A3: Intel will provide support for WDDM drivers, starting with the Intel® 945 Express Chipset family and beyond. See question 5 below for a detailed explanation of the WDDM support on platforms based on the Intel® 915 Express chipsets. However, Windows Vista is supported on the Intel® 865 G, 915 G Express desktop PC and 852/855 GM chipsets chipsets mobile running XPDM (XP Display Driver Model) driver included on the Windows Vista install media. Windows Vista will install on these platforms, but advanced features such as Aero in Windows will not be enabled as XPDM drivers do not support Windows AERO.

  The text above was extracted from the following link:

  http://www.Intel.com/support/graphics/sb/CS-023606.htm

  The version 6.14.10.4656 driver I use successfully on my HP D530 is discussed in the following Microsoft Forum thread:

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/5406d400-e9ef-4A10-A913-3706c16b76d1

  The link to the actual pilot (who was eliminated on the previous thread) is as follows:

  http://CID-ad503689c74985c7.SkyDrive.live.com/self.aspx/public/Intel%2082865g%20Driver%20%5E5Vista-Win7%5E6.zip

  Hope this helps someone else, and I thank all the people who have created the references above.  My HP D530 now works FINE!

• problem installing windows 7 on my HP compaq d530 sff Ultilmate

  Dear,

  I can't install windows 7 on my hp compaq d530 sff!, I've done several times, but unfortunately accept no more!. Here is the message I get after clicking the load the driver: "to install the device driver required to access your hard drive, insert the installation media containing the driver files, and then click ok. -No driver device not found, make sure that the installation media contains the correct drivers, and then click ok. » !

  I have not change anything my PC all Setup, I can install windows XP without having any problems, but I want only 7 must be installed on my desktop as before. any professional help would be great

  Concerning

  It's a venerable plu model corporate office. Considering how long it has been being used, that you might want to replace a desktop PC for more modern.

  You can have more success get a response in the HP Enterprise Business Community.

  Here's a discussion of 2010 on a very similar than your question