D600-1000-0142 error code
Help! Windows used to run... Well it takes an hour to load, use about 4 colors and crashes when I ask him to do anything!
Found that DSI short status test and got an error code 1000-0142 with a message... Unit4 test: Drive has failed. Status byte = 89
tried to run Dell PC Restore by Symantec to restore the default settings, you press the ctrl and F11 keys when the dell splash screen appeared, but nothing seemed to happen
I have no disks I thought that all software has been pre-loaded, my laptop is flea market.
Help, please
Thank you
Tags: Dell Drives
Similar Questions
-
Greetings,
I am the original owner of the laptop 600 m (delivery 3/04), which currently runs on Windows XP Pro.
40 GB hard drive. Has been one almost perfect machine other than a few minor issues software solved.
After completing a session last night, I went to the start menu to turn off.
I was marked "new software" has been added? Nothing. that I was aware.
Stop.
Connected later in the day before... Error message "Windows was not start because of the following is missing or damaged:
\WINDOWS\system32\config\SYSTEM.
Tried to boot mode safe... even.
Tried the last known good setting... even.
F2 set up Drive Self Test (DST short) error Code is not 1000-0142
F12 diagnosis same as above with the newspapers of the DST contains the previous errors.
Hardware diagnostics walked through extended Test and symptoms without negative results tree.
F12 tried to start w / CD player and operating system CD (Windows XP Pro) missing-corrupted message again.
F12 start w / the repair console and CD player.
Chkdsk /r ran twice... 1 short and no repair. 2nd time about 1.5 h and some files repaired or replaced.
Again would not but without missing corrupt message.
Ran my Maxtor external hard drive security forest recovery CD... reboot, always the same corrupt message missin sys 32 message mentioned earlier.
I've seen subjects compared to the this to the Board of Directors and also watched the Microsoft site for more information.
Things seem to point to the drive being smoked, but I was wondering if I would have taken a virus that might have caused it... referring back to the prior of software new message until the last stop of the system.
New test or maybe a system restore I can download on a CD and launch.
Any ideas or comments would be appreciated.
-
reset the error code of the mini 1000.cnu9115kg password bios
I have a mini 1000 I bought on ebay and put two together to create an operating unit. I need to reset the bios password. It shows an error code cnu9115kg. Thanks for your help
Try > e9lo33q3sh
-
ERROR CODE 2000 - 0142 WHAT DO I DO WITH THIS CODE?
I have a laptop DELL with Windows Vista loaded.
It tries to load the desktop but keeps running without result green bar
CHECKDSK is conducted without all the mistakes are found.
DIAGNOSIS showed the color screen, then the error code 2000-0142
which seems to be related to the hard drive.
F2 function key works to change settings
What should I try to run windows?
Thank you
Hello
It is an error code Dell saying that your drive hard has failed and must be replaced.
Read this information from the Dell Community.
http://en.community.Dell.com/support-forums/laptop/f/3518/p/19451299/20115134.aspx#20115134
http://en.community.Dell.com/support-forums/disk-drives/f/3534/p/19498610/20329964.aspx
http://en.community.Dell.com/support-forums/laptop/f/3518/p/19485947/20274290.aspx
For more information about error codes Dell, please ask in the Dell Community Forums.
http://en.community.Dell.com/support-forums/default.aspx
See you soon.
-
Error code: 2000-0142, HDD 0-Self Test UN Succesful status 79.
Hello guys
I ran a Diagnostic Test on my new laptop N5010, it failed the Test of hard drive and gave this message "error Code: 2000-0142, HDD 0-Self Test unsuccessful status 79.»
Can someone help please...
Regarads
khanisar
Error Code 2000 - 0142, indicates a failing hard drive / failed and you need to replace it, because it is new laptop for a replacement of the hard disk, contact the Dell Technical Support and provide the error message.
Bev.
-
Drive hard error Code 2000 - 0142
Inspiron 15 (3531, mid-2014)
I tried boot diagnostic that the result has failed with the error code 2000-142.
I have used a quick diagnostic race through dell online support site - it shows critical errors found
for hardware failure then suggested for a replacement.
Targeted both reading test SMART short self-test is broken.
We hope to hear from you on your recommendations of experts on hardware issues.
[Admin NOTE: maintain the label removed in accordance with the TOU strategy] [Admin NOTE: deleted in accordance with the Express service code TOU strategy]
Ryan Ibarreta - [Admin Note: personal information]
Philippines
Error code 2000-0142 usually indicates a failing hard drive / failed, first of all, try to remove and reinstall the hard drive, then re-run the diagnostic tests and see if you receive the same error.
If the same error is received, the hard drive has failed, then you need to replace it.
If you have a warranty from Dell, contact Dell Technical Support for a replacement hard drive.
Bev.
-
the HP mini 1000 CNU9162V02 bios error code
My sister gave me a hp mini 1000 computer but it has a bios password and we don't know what is the password, bios error code is CNU9162V02 ive searched high and low for a solution, can someone please, if you know the correct for this error code, pllleeease... help me... Thank you for the wonderful people!
Try Steve.
e9lo3g7617
3rd letter tiny L.
4th letter lowercase O.
9 is number 1.
Use this code to go into the BIOS.
Disable all passwords that are enabled.
If demand for CURRENT password using this code.
Request NEW password just press ENTER.
If asked to hit just to CHECK password to enter.
Save and exit.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
Office creative cloud 1000 error code.
I tried to install CC desktop downloader and get the error code 1000. Any help is appreciated!
Run the vacuum cleaner by, http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
-
I got up this morning and turned on my computer and I got an error Code 0142. Error 2000-0142 MSg. MSc unit 0 Drive Test failed. 79 status byte. Can someone help me? My computer was working fine yesterday when I turned it off.
-
HP Pavilion dv6-7020us: driver error Code 28 problems
Sorry if this is kind of a long start...
Read that a cause for Code 28 may be due again installed equipment that poses a problem of incompatibility, so...
First stop, due to problem of hard drive, adequate to get a hard drive again earlier this year. The new current hard drive is "INTERNAL HARD DRIVES DO SAMSUNG Spinpoint M8 ST 1000 L 1 TB 5400 RPM 8 MB Cache SATA (looks like break after" 1000"and"SATA", that's all I can put in).»
Got Windows 7 x 64 bit installed.
Ethernet controller, network controller, peripheral PCI, PCI Simple Communications Controller, SM Bus controller, Bus controller series universal (USB) and x 2 unknown device (one of whom I assume is the fingerprint reader) all fail with the error code 28.
The problem, however...
With the help of other computers and the family, I managed to get the downloaded files specifically driver installation for Windows 7 x 64 bit, moved to a USB key, ran the files on my computer (with nonworking pilots / that responded to the questionnaire), they seemed of ran perfectly fine and appeared to install correctly, but none of the enumerated factors do not always work.
Now currently at a loss to know what to do...
Properties: Details: Hardware ID: value...
Ethernet controller
PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C & REV_07
PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C
PCI\VEN_10EC & DEV_8168 & CC_020000
PCI\VEN_10EC & DEV_8168 & CC_0200
Network controller
PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00
PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C
PCI\VEN_1814 & DEV_539A & CC_028000
PCI\VEN_1814 & DEV_539A & CC_0280
PCI device
PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C & REV_01
PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C
PCI\VEN_10EC & DEV_5229 & CC_FF0000
PCI\VEN_10EC & DEV_5229 & CC_FFOO
PCI Simple Communications controller
PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C & REV_04
PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C
PCI\VEN_8086 & DEV_1E3A & CC_078000
PCI\VEN_8086 & DEV_1E3A & CC_0780
SM Bus controller
PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C & REV_04
PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C
PCI\VEN_8086 & DEV_1E22 & CC_020500
PCI\VEN_8086 & DEV_1E22 & CC_0C05
(USB) Universal Serial Bus controller
PCI\VEN_8086 & DEV_1E31 & SUBSYS_1818103C & REV_04
PCI\VEN_8086 & DEV_1E31 & BUBSYS_1818103C
PCI\VEN_8086 & DEV_1E31 & CC_0C0330
PCI\VEN_8086 & DEV_1E31 & CC_0C03
Unknown device
ACPI\HPQ0004
* HPQ0004
Unknown device
USB\VID_138A & PID_0018 & REV_0078
USB\VID_138A & PID_0018
. . . In my view, that it is all information. I'm sorry if I'm actually still lacking some information. Thanks in advance for the help! I look forward to the answer.
Hello:
Here are links to the drivers you need in the order you posted devices... just at the height of the sp # with those on your USB.
Ethernet controller:
This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.
File name: sp56167.exe
Network controller:
This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.
File name: sp57538.exe
PCI device:
This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.
File name: sp56166.exe
PCI Simple Communications controller:
This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.
File name: sp56158.exe
Controller of Bus SM: NOTE: first install this driver and restart.
This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.
File name: sp56156.exe
Controller of universal serial (USB) Bus:
This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.
File name: sp56164.exe
ACPI\HPQ0004:
This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.
File name: sp61037.exe
USB\VID_138A & PID_0018:
This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.
File name: sp56403.exe
-
Hello guys,.
During the execution of a web app to make me as a mistake: remote server does not. Here are the details of the spectators of the event who were captured at the same time where this error occurred:Event 1000, Application errorThe failing application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0ebName of the failed module: KERNELBASE.dll, version: 6.1.7600.16850, time stamp: 0x4e211da1Exception code: 0xe053534fOffset: 0x000000000000a88dID of the process failed: 0 x %9Start time of application vulnerabilities: 0 x % 10The failing application path: %11Path of the failing module: 12%Report ID: 13%Event 1001, Windows Error ReportingBucket of error, type 0Event name: APPCRASHAnswer: No availableCabin ID: 0Signature of the problem:P1: w3wp.exeP2: 7.5.7600.16385P3: 4a5bd0ebP4: KERNELBASE.dllP5: 6.1.7600.16850P6: 4e211da1P7: e053534fP8: 000000000000a88dP9:P10:Attached files:C:\Windows\Temp\WERC9CD.tmp.WERInternalMetadata.XMLC:\Windows\Temp\WERC9CE.tmp.HDMPC:\Windows\Temp\WEREE30.tmp.mdmpThese files are available here:C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_30877924d6b2c607fe88a8718915f25fb79093_cab_e905f2b0Symbol of the analysis:Recheck for solution: 0Report ID: d46a6849-8f6a-11e1-98af-00215e6e4855Display state: 4It is a priority issue we are facing in IIS. IIS is configured for the 2.0 Framework and underlying operating system is Windows Server 2008 R2 Standard. Please suggest how to solve. Any input related question above is significant.Hello
In dealing with the problem with Windows Server 2008, it would be preferable to send the same in the Technet community for more help.
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
Can not get updates Windows 7, error code 646
Windows updates fail almost always error code 646 today.
Other error codes are application error 100, event id 1000 and mshtnl.dll (registry errors?)
8 Windows Explorer has stopped working properly, running on windows 7
There has been a change in the health of windows, event 42
Here are some of my problems
* original title - can not get updates, Windows 7 instead of 8 as its supposed to, registry errors *.
Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates
http://support.Microsoft.com/kb/2258121 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
Cannot start error code 1290:0x50a BITS.
It is called @%systemRoot%\SYstem32\gmgr.dll,-1000 in the list of services and I can't start. When I select start it gives me error code 1290:0x50a
It is called @%systemRoot%\SYstem32\gmgr.dll,-1000 in the list of services and I can't start. When I select start it gives me error code 1290:0x50a
Sam,
Press Windows key + R to launch the "Run" command and then copy / paste the following command and click OK:
Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll
Reboot the machine before doing anything else.If you get the same error again, run the following command, and then restart again:
Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackupDo not skip restart because you make changes in the Windows registry. They have no effect until you restart.
If after you run the two commands, it still does not work, follow the instructions illustrated in this thread:'t-work-how-to-stop-office/a059c47b-e8ad-46c6-8278-ae143feead7c http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/windows-xp-update-doesn
-
Dell Inspiron 15 HDD 2000-01 42 error code
Dell Inspiron 15 HDD 2000-01 42 error code
A few weeks ago, my laptop was working fine but the next day, my laptop wouldn't pass the Dell logo when turned on. I ran diagnostics on it and gave me the following results:
Test results: Fail
Error code: 2000-01 42
Validation: 123661
I'd appreciate it if someone could tell me exactly the problem with the HARD drive, I need to replace, or there may be a wiring problem?
Thank you.
Zaharaq
Error code 2000-0142 indicates a failing hard drive / has failed, you can try to remove and reinstall the hard drive, and then re-run the diagnostic tests and see if you receive the same error.
If the same error is received, the hard drive has failed and you need to replace it, followed by reinstalling windows, then loading the drivers and applications.
Bev.
-
problem: when I turned off the laptop, it restarts and the rotating fan to high speed, I diagnose test automatically. I found this error Msg: hard drive 0 - self test unsuccessful. Status: 79 Msg: error code 2000-0142 suggest me what should I do
The hard drive failed - you need a new portable player, 2.5 "SATA.
Maybe you are looking for
-
Satellite M30-801: CPU only works with a 600 MhZ
Hi people, I have a strange problem since my PC back to toshiba support (lcd problem, on assistance report i red that the pcb has been replaced): my CPU goes up to 600 MhZ. I tried to update the version of the bios from 1.20 to 1.70 successfully and
-
Game Top Spin 2 ERROR 1402 could not open key
I try to install the game Top Spin 2, but I have the problem with the Error 1402.Could not open key: UNKNOWN/components and more numbers. Any solution for Windows XP?
-
Hello We have enbaled bitlocker with TPM using Vista Enterprise Edition with SP1. We came across the problem of operating system. So, we removed the hard drive and connected as secondary to another machine. He asks me to format the disks. Is it possi
-
window vista to vista ultimate upgrade
the question I have is my laptop has vista home and I would like to upgrade to vista ultimate, when I update what I lose all my program I have on my laptop? the reason why I'm upgrading is to me, we can not have vista on the computer home this is why
-
driver installed with no hardware has been disabled
When I start my computer, I get a window on a driver has been disabled due to a conflict between the version of windows visa, and the driver perticular. It started when I tried to run a cd with photos to scan program. I would remove this driver so t