Daisy chaining HP monitors

Similar Questions

• U2414H - question Daisy chaining

  Trying to get U2414H monitor purchased from Dell daisy chain with MS Surface Pro 3 (8.1) (all updates made). Driver for the monitor is also downloaded and installed.

  Have Surface Pro 3 dock miniDP to DP (en) U2414H then (out) DP / DVI on 3rd screen.

  I activated PD 1.2 on the Dell and I can extend screens of the Surface of the U2414H very well.

  I clicked on "detection" to see if it detects the screen which is attached via DP to DVI cable and it gives ONLY the option to connect via VGA.

  I could go buy a DP to VGA cable and hope that it would work with that, but why the options do not have a choice of DVI? If possible, please let me know what to do to get this choice.

  Thank you

  Katrina

  Update: ordered another monitor U2414H, but none of the cables provided with this worked. I had to order a cable of DP to DP to connect two monitors. DPout used in the RPI and it works fine now.

• Daisy chained multiple external hard drives

  Can I split my files pictures to several external hard drives.  My iMac is completed and I am on a budget.  I found a good deal on 500 GB FireWire external drives.  My library approaching the 500 GB and if I put it on an external drive and Garland a 2nd drive Apple Photos bed together?  I want to open the Photos app and see all my photos. And if he will only read 1 player both what it will look like?  How can I find a photo quickly if it is not on the current drive that I consult?  I was wondering if someone another daisy chained photo readers and what it will look like?

  JimboP wrote:

  Can I split my files pictures to several external hard drives.  My iMac is completed and I am on a budget.  I found a good deal on 500 GB FireWire external drives.  My library approaching the 500 GB and if I put it on an external drive and Garland a 2nd drive Apple Photos bed together?  I want to open the Photos app and see all my photos. And if he will only read 1 player both what it will look like?  How can I find a photo quickly if it is not on the current drive that I consult?  I was wondering if someone another daisy chained photo readers and what it will look like?

  You use IPHOTOS or PHOTOS and what version of the operating system.

  You can have several libraries in IPHOTOS and PICTURES (in the pictures that only your library designated system is synchronized with other devices via ICLOUD).     You can split the libraries of useful information - like a vacation, family events, pictures of your pets.

• Daisy chaining for 2 PrecisionHDMC 720 p cammera with 1 PrecisionHDMC 1080 p, with the codec C90

  Hello

  Is it possible to daisy chaining for 3 cammeras having different resolutions, with the codec C90?

  2 PrecisionHDMC 720 p cammera with 1 PrecisionHDMC 1080 p, with the codec C90

  Thank you very much!!

  Hi Moreno,

  Control of the camera uses the visca Protocol, it is same in both cameras.

  I tested previously and she works in the laboratory.

  Kind regards

  Dharmmesh

• Don't daisy chaining affect results of the assessment?

  I need to split a large file of Captivate 4 project into smaller segments. If I Garland resulting segments, what will happen to evaluating the results since the first segments of one or two. Currently, the results of the evaluation of all the slides appear as a total accumulated after the questionnaire at the end of the tutorial. If I shared the tutorial and daisy chain segments, the total valuation always results will include results of the evaluation of all the blades in the Garland?

  And what happens to the table of contents? All segments of the closed string will have the same table of contents? If so, how would I update the table of contents if I had to?

  If plug you in series a project, then each project will be an instance separated with no communication between them. Basically all assessments, OCD etc will apply to this particular project if you will not be able to get a cumulative total for your contributions in the last chapter.

  If you have access to a Flash programmer, you can create features to store the results of the quiz of each chapter and then bring them all together in the last chapter.

  There is no joy for the table of contents. Maybe you can use the aggregate instead of this function, but the functionality and the level of detail is not the same as the table of contents.

  / Michael

  Visit my Captivate blog with tips & tricks, tutorials and widgets.

• How to connect two Dell UltraSharp U2414H 24 inch screen LED monitors daisy chain?

  I just bought two Dell UltraSharp U2414H 24 inch screen LED monitors, but it is unclear how two monitors must be linked together. Cable does not seem to be provided? Can anyone help?

  You have the L412Z XPS 14Z. It has the following video ports back =.
  CDM (Mini DisplayPort)
  HDMI

  XPS 14Z L412Z CDM on--> Dell mDP to DP cable--> #1 U2414H DP in
  XPS 14Z L412Z out HDMI--> HDMI to HDMI Cable--> HDMI U2414H #2 in

• Resolution of U2414H DisplayPort Daisy Chain/STD problem

  Hello

  I have what seems to be a common problem with no solution on these pages; with DisplayPort STD.

  I had two of these Dell monitors over the weekend and spent about 3 hours trying to get STD to work with them. I arrived later, and they have worked fine for about 36 hours.

  In this time my computer restarted two times without any problem. However, this morning I had upward, turned and suddenly the second (end of my STD string) string is not recognized as an instructor. It shows my desktop, but only at 640 x 480. AMD Catalyst can see it, but refers to it as 'No Display connected.

  My setup is a Gigabyte Radeon HD 7950 feeding these two Dells (on a single string of DP STD), a Compaq Q2022a on HDMI and a DVI. The first dell also has a USB Bluetooth stick and WiFi USB dongles plugged, and the second dell USB tire this is the capacity of the first. Both worked absolutely fine when I went to bed, and this morning, the second in the chain was not.

  I am looking to buy up to four more of them for a tri-moniteur stacked configuration, but I need them to be more reliable before I can justify spending that much! I love the thin bezel and STD is a must for the configuration I want, but reliability is essential too, I don't want to spend an hour a day fixing everything...

  Thank you

  For anyone interested, my workaround is the following:

  -Unplug the monitor two monitor one

  -Disable STD on monitor 1

  -STD re - activate the monitor 1

  -Reconnect the monitor 2 in 1

  -Hold the power for about 8 seconds on Monitor 2

  Seems to work after having done this, not.
  Of course, a better solution would be for Dell to realize they sold a product of poor quality, do a recall and get fixed them correctly. This is currently my only product of Dell and if this is how their quality control, I certainly won't be getting more.

• Daisy chaining 2 U2414H to Surface Pro 3

  A month ago I bought an i7 Pro 3 Surface and a week ago I bought 2 monitors Dell U2414H more than 2 cables of Startech (HB miniDP2) and DP2DP.  I plugged the miniDP2DP at the entrance of the first monitor and then the DP2DP cable to the output port of the first monitor in the inlet of the second monitor.  I figured that miniDP to the Docking Station is not compatible extension so I plugged it on the Tablet miniDP.

  I can't get the two Dell monitors act as screens 2 and 3. When I select to extend the display, if I disable the DisplayPort 1.2 on the first monitor (via the menu settings-> DisplayPort display-> enable / disable) I can get the screen 3 is a 2 screenshot, but if I put it on Enable, screen 3 is empty.  When I change screen 2 setting back to activate, I get a warning message that I need to make sure that the graphic card supports STD / DisplayPort 1.2.

  I checked the graphics driver and firmware for the monitors and the Surface Pro 3. I tried the two cables provided with the monitors, all to nothing does not.  I called technical support from Microsoft and Dell technical support time and both tell me that their components work fine, it's a problem with it product of another company.

  I've seen several posts on this site but I haven't seen a good response to my problem.  Someone out there who has had this problem and found a solution?

  * Perform all Surface Pro updates

  SP3 is anchored and the SP3 Dock is using its power 48w cable
  * CDM SP3 Dock on--> Dell mDP to DP cable--> monitor active DP (DisplayPort 1.2) in #1
  * #1 monitor DP on--> Dell DP to the CDM cable--> #2 CDM Monitor in (DisplayPort 1.2 disabled)
  -or-
  * CDM SP3 Dock on--> Dell mDP to DP cable--> monitor active DP (DisplayPort 1.2) in #1
  * #1 monitor DP on-->--> #2 monitor DP DP DP cable in (DisplayPort 1.2 disabled)

  SP3 is using its power cable 36w and NOT anchored
  * CDM SP3 on--> Dell mDP to DP cable--> monitor active DP (DisplayPort 1.2) in #1
  * #1 monitor DP on--> Dell DP to the CDM cable--> #2 CDM Monitor in (DisplayPort 1.2 disabled)
  -or-
  * CDM SP3 on--> Dell mDP to DP cable--> monitor active DP (DisplayPort 1.2) in #1
  * #1 monitor DP on-->--> #2 monitor DP DP DP cable in (DisplayPort 1.2 disabled)

  * Drag from the right edge of the screen, and then tap devices. If you use a mouse, point to the lower right of the screen, move the pointer of the mouse to the top, and then click devices
  * Press on or click on the project and then choose one of the following options:
  PC screen only = SP3 only
  Double = Clone mode
  Extend = a giant office
  Second screen only = no. SP3, just monitors

• Daisy chaining with other routers and the common IP range EA6500 V2

  I have a local network of...

  • a modem
  • a gateway connected to the modem computer/server
  • has a modem-router connected to the gateway/server via the port of the gateway/internet
    (gateway/a two server NETWORK interface card)
  • a and B modem router wireless connected to the router via the gateway/router internet port B
  • both A and B using the same set of IP addresses, 192.168.0.XXX

  Now I want to do the same thing with my Linksys EA6500 V2 I did with router B, I want to connect the Linksys router has via gateway/internet port on Linksys.  In addition, I want the Linksys router to use the DHCP server on the gateway server / as everyone is on the local network and, of course, I want to use the series of IP addresses, 192.168.0.XXX.

  What I tried to do is to disable DHCP on the Linksys service, but nothing seems to change once the changes are activated.  I look in the Local network settings and see all the old default 192.168.1.1 for the router address and so on.  I also tried to change the address of the router manually an address of 192.168.0.x and was immediately cut off this subnet.  I tried the renewal of my Windows client computer and couldn't do that either.  And as my client could not change its own address 192.168.1.X, I couldn't reach the router to the address that I gave him.

  How can I set up this router so that it uses the DHCP server on the gateway/server computer, including acquiring its own address in the same series.  Or at least set up so that it uses the same series of address than the rest of the LAN and no longer functions as a separate subnet?

  It seemed that all I had to do to set up router B to connect this way was to disable the DHCP server and everything fell into place, no problem.  Is this all I need to do here?  Am I supposed to restart or something?  I'm tired of guessing and trial and error.

  All tips or hints would be appreciated.

  You have to give the EA6500 a router static IP address in the same subnet as your network, but not in the DHCP range.

  Follow the instructions for 'LAN to LAN' Cascading in the link below:

  In waterfall or connect a Linksys router to another router

  Thing to keep in mind when cascading a router:

  1. Change the IP address of the secondary router to something like 192.168.1.254 so its on the same network, but is not in conflict with the main router
  2. Make sure that the DHCP service is disabled on the secondary router
  3. Make sure that nothing is ever connected to the internet port of the secondary router
  4. Differentiate the wireless SSID by location (Ex: downstairs) and the channel

• Not active Ethernet E3200 ports if daisy chained with 2Wire modem/router?

  I have a 2Wire 2700G - B DSL modem/4 port router provided by ATT. The WiFi range has a problem so I had a router Linksys E3200 to extend range. I ran the cable Cat5 100 feet across the House and connected the linksys E3200 Cat5 between one of the 4 Ethernet ports on my 2Wire and the Port of 'Internet' from the Linksys 3200. I put in place and seem to have a stronger second network access this router wireless (although it is not a Repeater, I alternate between two wifi networks as I walk home with my iphone).

  I plugged in the Linksys E3200 ports WIRED devices wired Ethernet and they are not recognized by my PC as the devices connected to the 2Wire ethernet ports are. My PC is plugged into the port of 2Wire as well.

  How can I activate the 4 ethernet ports on the 3200 to be additional ports to my home network as the 4 on the 2Wire?

  http://homecommunity.Cisco.com/T5/wireless-routers/connecting-two-routers-wired-the-definitive-answe...

• The Daisy Chain Camera software update

  Hai all,

  We connected via Garland of precision 1080 p HD camera. We want to make the software upgrade for the same thing on the network.

  I found the document for the same thing, mentioning the camera software ftp transfer. But where I can load the file of the software (.pkg) camera.

  Can I use same file software to transport CANADA (TC 5.1.5 .pkg) for the upgrade of the camera files. Some body please help me.

  Thank you.

  Hello

  I've never tried the ethernet upgrade procedure, but I think the package that needs to be loaded via an ftp client for the camera which got an IP via DHCP is the package located at mnt/base/active/rover.pkg. Copy this package to a system which has installed the ftp client and that has IP connectivity to the camera.

  To check that your device is indeed a 'Rover' camera, you can run the following command.

  XStatus Camera //HardwareID

  * s camera 1 HardwareID: "52000000."

  * s camera 2 HardwareID:

  * s camera 3 HardwareID:

  * s camera 4 HardwareID:

  * s camera 5 HardwareID:

  * s camera 6 HardwareID:

  * s camera 7 HardwareID:

  * end

  Ok

  PrecisionHDMC 1080 p x 12 (Rover) a camera HardwareID: "50xxxxxx."

  PrecisionHDMC 1080 p 4 x (limited software Rover) a camera HardwareID: "51xxxxxx."

  PrecisionHDMC 1080 p 4 x (Sangam) a camera HardwareID: "52xxxxxx." Limited to 30 fps

  PrecisionHDMC 1080 p 4 x (Nandi) sold so far only with the SX20 (Asterix) a camera HardwareID: "53xxxxxx." Nandi has the new order form HDMI/camera and 1080 p 60.

  PrecisionHDMC 1080 p 2.5 x (Sispara) has Camera ID: 54xxxxxx. Sispara was the new HDMI/camera taken control and 1080 p 60 support.

  Rover should have HardwareID: "50xxxxxx."

  Check if the codec is the ftp client.

  [home-ex90-dderidde: ~] $ find /-name * ftp *-print

  / extra/bin/runtftp

  / extra/bin/TFTP

  /extra/etc/licenses.d/tftpd.gz

  /extra/lib/python2.6/ftplib.py

  /extra/lib/python2.6/site-packages/M2Crypto/ftpslib.py

  extra/lib/python2.6/site-packages/M2Crypto/ftpslib. Pyc

  /extra/sbin/in.tftpd

  /lib/security/pam_ftp.so

  /etc/sysconfig.d/TFTP

  /etc/licenses.d/tftpd.gz

  [home-ex90-dderidde: ~]

  There is a python ftplib.

  That could possibly be used as ftp client.

  More information can be found here.

  Do not know if the ftp server on camera requires a connection. Maybe he accepts anonymous?

  If this is the case, try to ftp.login () rather than ftp.login('username','password') below.

  Python $ [C60-in-TP-lab-CUCM-controlled:~]

  Python 2.6.6 (r266:84292, Sep 11/2012, 16:14:42)

  [GCC 4.6.1] Linux

  Type "help", "copyright", "credits" or "license" for more information.

  > ftplib import FTP

  > ftp = FTP ('drop.cisco.com')

  > ftp.login ('username', 'password')

  ' 230 user nsite Connect├⌐. »

  > ftp.storbinary ("STOR" + "rover.pkg", open ("/ mnt/base/active/rover.pkg", "rb"), 1024)

  "226 transfer complete."

  >>>

  Use exit() or Ctrl-D (i.e. EOF) to exit

• Dell UltraSharp U2515H Monitor

  I'm curious if my 27 inch iMac 2011 mid will be able to run both 2 Dell Ultrasharp U2515H monitors http://www.amazon.com/Dell-UltraSharp-U2515H-25-Inch-LED-Lit/dp/B00SPWPF1O?ie=UT F8 & PSC = 1 & redirect = true & ref_ = ox_sc_act_ti...).  In general, I need to watch sports events simultaneously on two different monitors, and I wonder if my iMac both these 25 inch monitors can handle at the same time.  Any help would be appreciated.

  Your iMac can support 2 screens Thunderbolt of Garland. This Dell monitor supports the DP 1.2 STD for daisy chaining two monitors.

  After reading using screens 4 K and Ultra HD TVs with your Mac - Apple supported it does not resemble your iMac would support 2 of these monitors. But I could be misinterpreted.

• HDMI to mini display port

  I have a Mac mini end of 2012 with shot of lightning/mini display port and hdmi port. An external hard drive is attached to the latter, but it doesn't have a second port for daisy chaining a monitor. I would like to connect a monitor apple display 24 inches to the mini. This view has a mini display port connector. Can I connect it to the mini via hdmi and display port cable or is it that is one way, only they are a signal of the Mac mini thunderbolt port input hdmi on a monitor?

  See:

  https://www.YouTube.com/watch?v=hbWJkVj8Xgw

  The right side also lists other members.

• U2415 - two connections for Display Port

  This is my first contact with Dell support and the first time I use the interface of the RFP.

  My question will appear in some basic way a lot of people, but I'm confused by the fact that my new monitor is equipped with a cable, which I assume is the only one, I really need to connect. However, the documentation does not confirm it.

  On the contraryt, there are two connectors on the monitor that are commented out using the interface to display, but with a different connector port. It's confusing and the documentation is only adding more confusion.

  Do I need a cable only? I got a cable with on one side a marked connector of the symbol "monitor - like".

  If so, I don't understand the purpose of providing two types of connectors and the need for an explanation (bad), not yet available in Dutch!

  Port numbers are 4-5 on page 10

  Thank you

  If your computer graphics card has the size DP (DisplayPort) out, to connect like this =
  RFP computer on--> Dell DP to the CDM cable--> U2415 CDM in

  If your computer graphics card has the mini size CDM (Mini DisplayPort) out, to connect like this =
  Computer AMD at--> Dell mDP to DP--> DP U2415 cable in

  Why we offer both? If the end user can daisy chain multiple monitors. As explained on page 27. Or connect two computers to the same screen using these different ports.

  For Belgium, the language is french.

• Garland of MBP hp monitors

  My work recently spent sellers and my older Dell monitors was exchanged for these:

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04199330.PDF

  I can connect the MBP to them using the Mini Display Port connector Display Port, and the screen "continues" to the MBP to the monitor - is there any steps to daisy chain the second monitor, so I use the MBP in clamshell mode?

  To the best of my knowledge of the Mac does not support the Garland of monitors.