damaged boot file Root\sytem32\ntoskrnl.exe, will not start even on the XP cd

I can get to the bios but don't even start with the XP cd.

Hello

· What is the number and the model of the computer?

I suggest you to use any other Windows XP CD and check if you are able to start using the disk.

Follow the steps from the link which provides information about the same: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477

If the steps above do not help, you may need to contact the manufacturer of the computer.

Tags: Windows

Similar Questions

  • Windows 8 will not start even with the CD after uninstalling Linux

    Hi, I am currently faced with problems with my Dell Inspiron with Windows 8 3520 is installed. I had been dual-boot it with Linux Mint for a while with no problems until I decided to go completely back using Windows for convenience.  As I had installed Linux by creating a partition I followed online guides to remove the partition on which it was found, and expand the partition holds Windows to its original size. This seemed to go off without incident, until I tried to delete Grub and got to the start of the back straight to Windows computer. I followed a couple of different guides without result and finally ran a program called Boot Repair that just make things worse. After you run the program, my computer began to start directly on a screen of recovery with the error message:

    Boot your pc configuration data is missing or contains errors
    File: \EFI\Microsoft\Boot\BCD
    Error code = 0xc000000f

    After that happened, I called Dell and pushed them to send a disk of Windows 8 for me, so I could try a clean reinstall, I thought I'll fix it. Unfortunately it allows me to boot the disk. Everytime I try (when entering the BIOS and selecting the CD drive to boot from the disc) I get a message saying missing operating system, along with various things I can provide if required, and ending in asking me to insert the bootable media in the selected drive, press which just repeated the same message again. I ' v read on various fixes online without result, most who ask me to change the CD in first priority which I can't do is not listed as an option in the menu accessed by pressing F2 BIOS. I tried to add my CD drive option, but when I click in it, instead of getting the readers of CD or something like that, I get a menu called select Media Driver with options like this:

    WDC WD10JPVT-75A1YTP - Partition 1

    the only difference between them being the partition to which they are assigned, 1, 2, 4, 5 and 6. If I press on enter on any of this that it brings me to another menu called select media with a variety of different options, which change depending on the partition that I chose, which none means nothing to me. I don't know enough to try anything more, and even people at Dell seem to be at a loss. Any help would be much appreciated because I am completely lost at this point and this is my first laptop.

    Hello

    I'm not 100% sure the disks that you actually... The drive set to restore your computer to the factory should be at least 2 or 3 DVD...

    You can reinstall windows only... which, I imagine, would solve the immediate problem.

    Delete the partition with your old windows 8 on this... Don't you say that you developed it in the first partition or something... There may be a small 300 MB partition as the first and possibly a 30 GB or more, depending on the order in which Dell installed their...

    Go by your memory as to the size of the partition that you expanded 8 Win...

    The thing with reinstalling windows just is that you do not have a Dell preinstalled stuff.

    Then you would not be able to do a full restore to factory...

    Manufacturers have made significant changes as to how it's done with Win 8... as there are now several types of Bios...

    You really can't find worse off than you are now.

  • FLA, the size of the file is too big and will not reduce even after the removal of assets

    I loaded a png sequence in a FLA file. This makes the huge file, so I decided to remove them. However, this has not reduced the size of the DFL. I checked the library and deleted the PNGs with no luck. I even deleted all forms of asset library and deleted all the content of the scene and the timeline, but the FLA is still almost 1 GB. How can I fix it!

    I think that there is another bug in Flash.

    I don't know who marked this as "right answer", but he did not work for me!

    I took a whole new folder full of JPGs and then tried the above suggestion. Then for good measure, deleted ALL the content of the FLA file and emptied the library. I tried and then clear the Cache of publish and save as. The FLA file (empty) is always greater than 50 MB!

  • Sidebar.exe will not start

    Hello, Microsoft community.

    My problem is, sidebar.exe will not start. He does not appear in the Manager of tasks and does absolutely nothing when I run the executable file.

    I have a new laptop, just installed Windows 7 Ultimate 64 - bit on it. Now, here's what I just did after installing Windows:
    1 remove some windows components:

    -IE

    -Windows media center

    -Games

    -Tablet components

    2 installed all updates and drivers needed

    3 optimized for SSD Windows (I installed on the SSD and HDD extra for Windows files):
    -moved my user on an internal HARD drive folders
    -off hibernazation
    -a rejected the files on the system drive for the content index
    -Move page file of SSD to HDD

    -people with disabilities Prefetch and Readyboot

    To solve the problem, I tried (I rebooted after each operation):

    -running sfc/scannow (says it fixed a few errors, but eventually I saw no changes)

    turn the component Windows Gadgets

    -in the course of running sidebar.exe administrator

    -installation of hotfix (http://support.microsoft.com/kb/979164) - said that it is not compatible with my setup.

    I really hope that the information is more than enough and can someone help me solve the situation.

    Hello

    Glad to know that you were able to resolve the question and thank you for sharing the information with us. For more information on this update, see Microsoft KB article:

    The fix it solution described in this section is not designed to be a replacement for any security updates. We recommend that you always install the latest security updates. However, we offer this fix it solution as an option for workaround for some scenarios.

    MS13-038: Internet Explorer security update: May 14, 2013

    http://support.Microsoft.com/kb/2847204/en-us

    Thank you and best regards,

    John

  • File \i38\system32\ntkrnlmp.exe could not be loaded. The error code is 32 768. Implementation cannot continue.

    original title: I get an error code 32768

    File \i38\system32\ntkrnlmp.exe could not be loaded.  The error code is 32 768.  Implementation cannot continue.  How can I fix?

    Hello

    · What is the number and the model of the computer?

    · Which edition of Windows you install?

    Try the steps listed in the link below and check if it helps:

    "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

  • Vista will not start. Verifying the integrity of system files and repair has no ErrorCode = 0 x 2 HELP PLEASE!

    ASUS PC, Windows Vist Home premium, all updates.

    Out of the blue, it will not start.  Access the start scrolling (the one just before logon) screen and it just stops.

    Twice I ran Vista check utility.  The first time, I chose to do the system restore to previous state.  Restarted.  Always off.  The second time, it took much longer and from what I can see.  All TESTS PASS, except one:

    Repair action: repair and checking of the filesystem Integrety

    Result: failed. Error code = 0 x 2

    Time required: 6206818ms

    I get no blue screen, I can't even any screen!

    I'm triying to repar because I have several costly software titles that link the authorization key code to a key hardware and software installation.  I don't know that I could reinstall if I get a code (randomly?) different generated software.

    I don't know about i-tunes and other content downloaded my wife has such as MP3 files and audio books.

    Thanks for any help!

    The test fails (SFC) checks for corruption in the files on your system.  If she can't even complete, she suggests the Vista all system needs to be re-installed - but you have already done this and you still have the problem.

    In fact, look like a hardware problem.  Here are some troubleshooting guidelines hardware that can help (but probably not for this question as what you really need, it is a replacement for test):http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  Frankly, I think it's time to take the system to a repair facility of good reputation for the service computer (or to return to the manufacturer for repair - costs, schedule, guarantees and make a decision).  I don't know what hardware component.

    If you can, try to back up your data before you import it it because they will probably wipe the drive clean during the process. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (perhaps done on another computer).  This should give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, try slaving the drive to another system and access the data in this way.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

    Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

    Hi rogerk94701487,

    Could you please check the event viewer and let me know the path of the defective Module once.

    How to check the event viewer: Photoshop CC 2015 crashing very frequently

    Kind regards

    Tanuj

  • Vista will not start even in mode without failure or will start up repair help

    Hello everyone,

    I've been many problems with my OS recently (Vista 32 bit business) and decided to reinstall (it was really a last resort). The relocation went well, but in the end, he got the black screen with the extended cursor and didn't budge (I left it overnight).

    I forced to restart at the end of the day, and now it won't start, it just says loading windows and displays the logo of loading, but will not charge.

    Safe mode will start to load the drivers, but then freeze, leaving a permanent list of drivers and a "Please wait".

    I tried to boot from the Vista startup disk, who works the Startup Repair very well and running. The first time, he said he found problems with the boot files automatically and then asks me to click on "repair and restart. Once I do, nothing changes, it's always the same.

    I tried to run a further startup repair, but it does nothing, just scans and scans and scans... but can't find anything in the newspaper (it is not passed the crawl log entry).

    I can access the features on the disc to start very well, so I ran guest and drive a DSKCHK (read-only), but again it froze in the third part.

    As far as I know all my hardware works fine, and a diagnostic scanning don't tell something abnormal.

    ... any ideas?

    Enjoy your time,

    Chris.

    Hi Chris,

    This resembles the faulty Ram or a hard drive does not properly, even if the systems on board diagnosis cannot capture an error!

    Of what you sayed I recon, it is a hard drive error more defective ram, try rerunning DSKCHK and see if it stops on part III, once again, if the fact, its probably your hard drive! Maybe someone else has a similar thought?

    Hope this helps with your problem.

    Jon

  • whenever I touched icon it will not start and sent the report but heard nothing back

    Since yesterday, when I click on the firefox icon that it does not start, it shows the screen of crash reporter and said that he will attempt to restart, but when I type restarts, it crashes again. When I hit exit firefox sends report but ive heard nothing back. not sure if I need to download the new copy or wait for the response.

    You can check if you can start Firefox in Safe Mode by holding down the shift/Options key.

    Try to start Firefox with the subject: blank page by creating a copy of the current Office Firefox shortcut and add a space and -url "about: Virgin" in the target field.

  • Vista will not start - stuck on the progress bar with MS logo

    Yesterday afternoon, my HP desktop PC would not initialize. The progress bar would be continually scroll down with MS logo, and it will never change. I tried unplugging all USB ports and running system recovery. This morning, the PC said something to the tune of «this machine could not be restored...» If you have recently made a hardware change try to return to your old configuration. If problems persist, please contact your administrator. »

    We had the machine for about 18 months with no problems at all. It is equipped with AMD processors and is running 32-bit Vista Home Premium. I currently have anti-virus protection of software and spyware. I don't think that the office came with a recovery CD. There is a restore disc but I don't know if that was consulted. I tried to boot normally and repair the command prompt startup files with no luck.

    I hope that we bought the extended warranty from Staples, but meanwhile information or suggestions would be greatly appreciated.

    Thank you

    lucasmartin,

    The Advanced Boot Options menu lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts. Try the loads up in safe MODE , there may be some drivers that are corrupt or using last known good Configuration.

    For more information http://windowshelp.microsoft.com/Windows/en-US/Help/f9c50a72-04ec-4088-9fd4-a4f979eef5a71033.mspx#EAF

    Engineer Support Justin M. Microsoft Answers visit our Microsoft answers feedback Forumand let us know what you think.

  • Satellite L300 will not start even in safe mode

    Hello.

    Whenever I turn on my laptop, it shows me two options: start windows normally or perform a system repair.
    I tried both of these options, but I can't seem to access the page where I have to enter my password to access my desktop, I tried a number of things by pressing F8 during startup, including startup repair up to and restore to the previous point, but nothing happened.

    I have the vista operating system and it seems to freeze immediately after loading (the long rectangular bar with the Green thing from left to right, saying Microsoft Corp. below). It freezes... the page is all black and my cursor is there, I can move the cursor, but nothing is there to click on. HDD/ODD lights do not Flash indicating that the laptop is not all 'work '.

    In addition, it took me to a page where he was "collection of data for the crashdump"... don't know what this means but yes and it also took me to a page where it says 'one of your disks should be checked for consistency. He also posted a message saying that the registry file failure does not load. Systemreboot/System32/config/system

    I start it in safe mode and it shows a bunch of files and says please wait.
    After my computer goes on a blank page (all black) but I can see and move my cursor and it is bigger than usual so I guess he's about to go to safe mode, but just, he remains on the screen and does nothing else.
    He was about 35 minutes and it's still at this screen, that nothing has changed.

    Thanks for your help :)

    Hello

    Try to recover the device by using the drive HARD recovery option.
    I hope you didn t change anything on the HARD drive recovery partition.
    HARD drive recovery allows you to reinstall the operating system without the use of all disks!

    Turn on the device, press F8, choose repair my computer and choose the option to drive HARD recovery.
    Usually, it would begin the new installation of the OS. But note; HARD drive recovery option would be to format the whole HARD drive, which means that you will lose all files stored on the HARD drive.

    Welcome them

  • Acer Aspire laptop bluescreened, will not start even in safe mode, running vista

    My roommates son asked me to help him to be on the internet, which I did, ran unusually slow in doing so, I noticed it when I checked, I found that the notebook had three solutions of different software protection, antivirus, Norton, McAffrey and AVG 2011 version for free. Also I noticed he had some solutions that provided a diagnosis, list of problems found and wanted to pay for the product before they would allow acccess to the fix. I uninstalled Norton and the McAffrey and improved the AVG free version of 2012. I also uninstalled the pesky diagnosis/buy me for the correction and the ask.com toolbar software. I installed ccleaner from piriform as well. The laptop seems to run a little faster, but the next morning he projected blue and when I tried to start it in safe mode it not loaded so far and then frozen, always in the same spot something AVGi and then it crashes, it will not load the rest of the necessary drivers. I tried to boot to the last known good as well. I even tried to downgrade to Windows xp home edition sp3 and when I do it it says there is no hard drive detected, and do I have to make sure that it works correctly.  I am at a loss, my sons friends bought the laptop (Acer Aspire 5315) for $50.00 and did not get a recovery disk so that the option does not exist or the other. What can I do to solve this problem. I'm sure that for some reason, it has to do with the BIOS and I went to the Acer site (from my laptop) and downloaded something to repair the bios on a flash drive, but me is not good because I can not start on either flash player. I am at a loss here and have no idea how to solve this problem. I am practically self-taught and I am a beginner when it comes to repairing the problems. This one is right behind me, someone has an idea what is my problem?

    I even tried to downgrade to Windows xp home edition sp3 and when I do it it says there is no hard drive detected, and do I have to make sure that it works correctly.

    If you tried to install Windows XP, and it says that? Do you have any installation CD? I don't want to say this, but maybe the hard drive went kaput. Maybe a little rare, but it can happen and so he bought the laptop for $50, which I am sure he did not a store. You hear a clicking sound from the hard drive? Have you checked for the hard drive in the BIOS?

  • Protected dmg will not open, even with the RIGHT password

    I created a password protected DMG, and now this record does not, although I am sure that I use the password. After entering the PW, I get a message indicating that the password is incorrect: ' try again - please enter the password to access the [FolderName] .dmg files»     Yesterday it was fine, and I use it every day from the folder.

    Yesterday I was accessing the DMG over LAN. Perhaps a corruption that happened then. The password does not also work on the same Time Machine recovered file DMGs, be saved.

    Other messages, I understand that using the console to get a newspaper might be useful, so I (think) I don't have that. What I believe to be the relevant lines produced when I tried to open the file is here:

    16/12/15 7:19:48.541 PM SecurityAgent [942]: failed to initialize the named IconCache: com.apple.iconservices with error: error Domain = NSCocoaErrorDomain Code 4097 = "could not connect with a helper." (connecting to the service named com.apple.iconservices) UserInfo = 0x7fccb3712a90 {NSDebugDescription = connection to the service named com.apple.iconservices}

    16/12/15 7:19:48.543 PM SecurityAgent [942]: error returned by iconservicesagent: Domain = NSCocoaErrorDomain Code error 4097 = "could not connect with a helper." (connecting to the service named com.apple.iconservices) UserInfo = 0x7fccb3721040 {NSDebugDescription = connection to the service named com.apple.iconservices}

    My system is Yosemitte 10.10.5.

    Does anyone have any ideas on how I can access my files again?

    Thank you

    -Tw

    UH... stupid. I'm sorry, I just cheated on my password. It's good, nufin is false, and it was the just operator error.

    .. . How can I delete these messages?

    This forum is anonymous?

    Ugh lame, sorry

  • Envy 17 j120na: 10 Windows will not start because of the driver installation failed

    History:

    I have a computer laptop j120na Envy 17 that came with windows 8.1.

    I did the free upgride for windows 10 the 18th of this month with success, but because I was not able to decrease or increase the brightness of my computer, or put it to sleep, I realized that I still had to download/update drivers. First I updated the driver GeForce since my SWsetup folder but for the other, I searched online for her, then I saw the driver download progress bar but no progress has been made. I closed the dialog close and there you go, laptop does not start, I just saw a spark between the mouse pointer and the circular blue contraption. Sometimes he shows me a BSOD with lock core auto boost with irql higher acquisition.

    Question:

    Is this a problem with the driver installation? And if so, how do I return it?

    P.s: System Restore is not an option, I restore point.

    Hi there @Aj1baba,

    Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and assistance of HP and the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you are receiving an error message that says "acquisition of lock core auto boost with irql high ' on your HP ENVY 17-j120na Notebook PC.

    The question could be deemed to occur by downloading the update. It is difficult to say at this stage. As to return to it, your best bet would have been the restoration of the system, but you mentioned only that a system restore does not work because you do not have restore points.

    Have you tried to go into Safe Mode?

    You have media or recovery disk?

    Have you tried to do a Reset BIOS?

    Have you tried perform a hard reset?

    You have beep codes or flashing LEDs?

    Please ensure that all Bluetooth device that you use with the laptop is disabled (including mobile phone).

    Please note: delete all USB/Bluetooth devices. Disconnect all devices of non-essential, as these can cause some problems.

    You can update all your drivers by going to the Web site the driver HP or by using the HP Support Assistant. If you enter Safe Mode, I suggest trying to erase the driver that you have downloaded your downloads (or the folder that you saved it in), so I suggest to make updates using updates of Windows or HP Support Assistant for now.

    Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

    Have a great day!

  • Vista will not start even in safe mode

    Download service Pack 2 electric exploded Vista start the system restore / boot cannot fix blue screen with stop: 0x0000c1f5(0x00000000,0x00000000,0x00000000,0x00000000), can anyone help thanks

    Hi, HJ85,

    To resolve this problem use these threads for reference:

    Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".

    Stop error when you start a Windows Vista-based computer, even if the hotfix 946084 is installed on the computer: "0x0000C1F5".

    How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer

Maybe you are looking for

  • How to copy events in a library of photos on an external drive

    Hello I need to know how to copy events in a photo library on an external drive. I have OS X El Capitan 10.11.6 Thanks for the help

  • One handed microscreen

    @Moto_Joy @AlphaDog you guys know how to turn a hand microphone screen this feature in motorcycle E3? Swipe up gesture doesn't seem to work. Motorcycle app is also missing from the phone.

  • How can I get my Canon MP printer to recognize a charged cartridge

    I installed a refilled ink cartridge, but the printer don't recognize it - how can I work around this problem?

  • DVD writer stopped writing - Vista missing files

    My dvd writer just stopped working. It crashes 5 dry (50%) and then told me that I don't have a recordable disc. I just noticed, but he COULD have started right after my daughter installed the latest version of itunes. Certainly miss me my IMAPI serv

  • a230n new HDD needs refurb

    Hello I have a desktop HP Pavilion a230ngift. (win XP Home Edition) I bought a set of recovery disks for my a230n and I now need to get a new and preferably improved Hard drive. I was told that I need to get a hard drive with a PATA interface.  the o