Damaged file host

Adobe tell me that my PC has a corrupted file. Is someone can you please tell me how to get this fixed, thanks

Hello

See this article:

How can I reset the default Hosts file? Windows 7, 10 and 8/8.1 is essentially the same.
https://support.Microsoft.com/en-us/KB/972034

I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.

    Everything was fine when last stopped.  Then this error message.  Cannot get to anything that will open any program or allow me to run a CD.  Cannot start because of missing or damaged file: \Windows\AppPatch\drvmain.sdb.  Cannot run CHKDSK or use reinstall the CD because there is no place to run is.  Cannot get to Norton to uninstall.  Help!

    Hello

    If we can start safe mode?

    If so, we can perform Clean Boot Troubleshooting:

    http://support.Microsoft.com/kb/310353

    http://support.Microsoft.com/kb/316434

    If this isn't the case, then we might need a Windows XP CD in order to move forward.

    Let us know.

    Best regards

    Matthew_Ha

  • Windows cannot start due to a missing or damaged file

    Original title: using a NETBOOK, WINDOWS can NOT START due to a MISSING OR DAMAGED FILE

    error message. Windows\System32\Config\System

    Let me guess that your netbook from brand not specified and the model has no CD/DVD drive and you have no real media installation of XP and before the incident and during the execution of XP, your system suffered a power failure, power failure, aborted restart or an abnormal termination?

    This is not an insurmountable problem in the world today... it happens all the time in these forums.

  • Explorer Windows has stopped working. Name of the damaged file: wmp.dll

    Original title: Windows Explorer has stopped working

    There seems to be a lot of discussion on this issue.  I tired some of the patches, but some of my numbers seem different from what other people have.  The problem is on my laptop.  I try to connect to my router and have internet access.  My office is a new computer with Windows 7 installed.

    When I try to open my network center and sharing on my laptop, the computer thinks for a while, and then I get the Windows Exporer stopped working window.

    ProblemEvent name: InPageCoFire

    Error state code: c000009c

    Type of media loopholes: 00000003

    Name of the damaged file: wmp.dll

    The system version: 6.0.6002.2.2.0.768.3

    Locale ID: 4105

    Additional information 1: fd00

    Add information 2: ea6f5fe8924aaa756324d57f87834160

    Add information 3: fd00

    Add information 4: ea6f5fe8924aaa756324d57f87834160

    I am at a loss!

    Thank you

    Kevin.

    Hey Kevin,

    You will need to run the command above in the elevated command prompt.

    Refer to this step help: How to run a command with elevated privileges?

    After you run the command of high fashion, you should get the message, "" DLLRegisterServer in wmp.dll managed."

    Also, you can run the method 2 regardless of the success or failure of the method 1. Please try these methods first and see how it goes.

    Normally, it is appropriate to fix this problem by running SFC scan and you would not need to copy the file.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error message on my Vista computer: missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost).

    Missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost). How can I recover my system, if possible? It does not even start.

    Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

    If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  The Startup Repair tool can repair atapt.sys.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

    If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

    If this does not work, try to start in safe mode (click on the F8 key during startup and go into safe mode with network - or using the prompt from the disk, if necessary, several times).  Then we will check some of your system files:

    Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator (skip thiis step if you use the disk)...

    Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  In a best-case scenario, he'll fix Atapi.sys.

    While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

    If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / event viewer - type eventvwr and enter, if do it from the command prompt).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

    I hope this helps.  Post back the results of the analysis and attempts to repair if these do not work.

    Good luck! Lorien - a - MCSE/MCSA/network + / A +.

  • When I connect and the home screen appears I get this message: DLL environment initializeO-multiple Logger could damage files.

    Original title: Logger initialized O

    When I connect and the home screen appears I get this message: DLL environment initializeO-multiple Logger could damage files. What should I do? Thank you - E.Schmidt

    Hello

    1 how long have you been faced with this problem?
    2 did you recent hardware or software changes to your computer before this problem?
       
    Try to perform the clean boot on the computer.
     
    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
     
    Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • damaged files

    Hello everyone.

    My mobile phone (note m.1 meizu) had only enough memory, yesterday I transferred all of the music on the pc that is running Windows 7. This morning, I was check if everything was OK and I saw a lot of songs where whit another name and some of the time could not be read. I deleted the files from the phone... So, what could I do to get the music into the phone or repair the files on the computer?

    Thank you

    Hello

    For us to provide you with a precise solution, let us know the details below:

    1. What is the format of audio file? (.mp3, .m4a, .mp4, .wav, .wma, .4a, .mp4, .mid, .midi, .au, .aiff)

    2. What is the application that you use to run the music files?

    3. What is the error message or error code that you get when you run these files?

    Try the following solutions for damaged files.

    1 System File Checker tool to repair the missing or damaged system files.

    2 try running a virus scan.

    3. you can play the file using Windows Media Player.  Windows Media Player

    4. try to copy and transfer files from your computer to your mobile phone and let us know how it goes.

    Keep us updated with the details.

    Thank you!

  • Repair damaged files

    MY computer laptop windows 7 has some damaged files is there a way to fix it?

    Right-click on the file or folder and then click on restore previous versions.

    You will see a list of the available versions of previous of the file or folder. The list will include files saved on a backup (if you use Windows backup to back up your files) as well as restore points.

  • 4.5.2 and files hosts NAC agent

    Hello

    Since the PC are managed by the NAC, some users had problems with the 'host' (empty folder) file.

    The agent NAC has influence any on this mechanism?
    Is it possible to reload this file?
    Thanks for your help

    Murielle,

    NAC wouldn't do anything to the file hosts on your client computers. There is something else at play here.

    HTH,

    Faisal

  • Why not save a file HOST Unicode or any other format beside ANSI format? Either way, which is Unicode format?

    Why not save a file HOST Unicode or any other format beside ANSI format? Either way, which is Unicode format?

    You would normally use unicode when you want to a text file that contains those outside of the normally the ASCII value... accentuated characters and others. They are rarely used in the definition of host names.

  • Impossible to uninstall the applications Manager - fix file host

    Try to uninstall all my adobe products (if I can do a clean reinstall). I ran all uninstall them with the creative cloud cleaning tool, but I can't seem to get rid of the Manager application files. The tool clean: "difficulty Host File.

    Hello

    If you are unable to uninstall the application using the cleaning tool, please try steps mentioned below-

    Reset the file hosts:

    Note: You may need disable you the security software to change your hosts file.

    Windows

    1. Click Start > run, type % systemroot % \system32\drivers\etcand press enter.
    2. Right-click on the hosts file, and then select Open. Select the application Notepad open the hosts file.
    3. Save the hosts file: choose file > save under, save the file as hosts.backup, and then click OK.
    4. Look for the hosts file for entries referencing activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
    5. Save and close the file.

    Mac OS Log in as an administrator to change the hosts file in Mac OS.

    1. In a Finder window, choose go > go to folder.
    2. Type / etc.
    3. Select the hosts file and open it.
    4. Save the hosts file: choose file > save under, save the file as hosts.backup, and then click OK.
    5. Look for the hosts file for entries referencing activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
    6. Save and close the file.

    After trying this rerun cleaning tool.

    Let us know if this will help!

    Kind regards

    Sandrine

  • Can someone tell me what file hosting imac needs moding/etc. to validate the edition number. Lightroom 6

    Can someone tell me what file hosting imac needs moding/etc. to validate the edition number. Lightroom 6

    Log in as an administrator to change the hosts file in Mac OS.

    In a window of Finder, select go > go to folder.

    Type/etc

    Select the hosts file and open it with a text editor.

    Save the hosts file: Choose file > save as, save the file as hosts.backup, and then click OK.

    Look for the original hosts file for entries that reference activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and remove these entries.

    Save and close to overwrite the file.

  • Issue of the Adobe Creative Cloud missing or damaged files

    I tried to open Adobe Creative cloud so I could download Illustrator, and when I tried to open it, it says there were missing or damaged files and download again. But before Adobe Creative Cloud even has finished installing, the same box popped up and asked me to do the same thing again. I had tried the same thing 3 or 4 times over, and it has not worked once. I am a PC user, and I would really appreciate if someone can help solve the problem. Thank you.

    Please follow the steps below: -.

    1 - uninstall the Adobe Creative cloud Control Panel application. (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)

    2 remove Adobe Application Manager and OOBE folder of

    C: drive and navigate to C:\Program Files (x 86)------\Adobe "Common Files".

    3 - remove the folder Adobe Creative cloud of C:\Program Files (x 86) \Adobe.

    4. Remove AAMUpdater and OOBE [system drive]: \Users\ [user name] \AppData\Local\Adobe

    5 reinstall the creative application of cloud at the bottom of the link

    https://creative.Adobe.com/products/creative-cloud

    I hope this helps.

    Kind regards

    Vivet

  • Damaged files Adobe Muse site and cannot be opened

    Hello

    I designed my first site on Adobe Muse.

    However, when I tried to open the file to continue designing, a message popped up saying "damaged files Adobe Muse site and cannot be opened.

    I read the previous discussions on the same issue:

    -The file is stored on my mac, not synchronized Dropbox or any other software.

    -I have not yet published the site.

    -My machine did however turn off due to load shedding while the application of the Muse was open (but not the file). Would this have something to do with it?

    Is it possible to recover the site?


    Thank you


    Hello Akshay,

    No worries, everything has already redone.

    Kind regards

    G

  • Damaged file Site Muse

    I wonder if there is some way I can repair my damaged file of the Muse site.

    Please send us the .muse file at [email protected] as well as a link to this topic for the context and we'll take a look inside. If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc.. Thank you.

Maybe you are looking for