DAQ Assistant does not appear when starting a new project in Visual Studio 8 with Measurement Studio

Similar Questions

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• Status window component-fax fax Windows does not appear when sending or receiving

  I can send and receive faxes using Microsoft fax in windows component, but fax status window does not appear when sending or receiving.  How can I fix?

  Assuming that long ago, that you have installed Service Pack 1 for Windows XP, your problem may be a badly configured third-party firewall.  See http://service1.symantec.com/SUPPORT/nip.nsf/4a29389c214c78ea88256c75005f451a/713afacbd4135e0a88256c77007e526f?OpenDocument

  Also take a look in the event viewer (start > run > eventvwr > OK) for errors or warnings related to the fax system.  If you find one, double-click on it to open the event properties, and click on 2 pages below the up/down arrow icon to copy the events to the Clipboard.  Then paste it in your response.

• How can I know if private browsing works? The purple mask does not appear when I click on the mask icon. In my privacy settings "never remember" is selected.

  I'm trying to confirm private browsing works. At the moment, I have no way of knowing whether or not it is enabled. The purple mask, referred to in the help does not appear when selected. I should say in my privacy settings, I have never chosen "remember", for the story.

  Hi willpublx, when you have selected never "remember history" in the privacy options so you are actually in 'permanent private browsing mode' and that there will be an extra mask icon to indicate that.

• Open with does not appear when I click on a URL in Firefox on my desktop

  Click right 'open with' does not appear when I click on a URL in Firefox on my desktop. The codec-c no longer works with 9 update of Firefox, so I would like to open with Internet Explorer instead until the Codec-C is compatible with Firefox again.

  Add - ons:

  • See-> https://addons.mozilla.org/en-US/firefox/addon/open-in-ie/
  • See-> https://addons.mozilla.org/en-US/firefox/addon/open-with/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello
  Try this:
  http://support.Microsoft.com/kb/306318
  b Eddie

• the Task Manager does not appear when right-clicking on the taskbar

  The Task Manager does not appear when right-clicking on the taskbar

  Hello

  It appears when you press ctrl + shift + ESC? It seemed before? You are an administrator on this computer or is it a corporate system?

  If he has suddenly ceased to be available, it's a good sign that you have picked up a virus or some kind of malware. Formal analysis in safe mode is your first line of defense.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless.

  My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless. And when I try to add it, the system can't find it. Please help

  Belkin support for your model, for installation instructions.

  Your router will not appear in the devices

• He repeats to me update failed and he said photo shop is installed, but does not appear when I search for it, how can I fix

  He repeats to me update failed and he said photo shop is installed, but does not appear when I search for it, how can I fix

  Nevermind I figured it

• I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  Please contact the original publisher of the widget.

  Thank you

  Sanjit

• Why iPhoto does not appear when I opened 13 items on iMac?

  Why iPhoto does not appear when I opened 13 items on iMac?

  Moving to the right forum

• Express pins DAQ wire does not appear

  Hello. I recently using DAQ and LabVIEW...

  I use 8.6 OR DAQmx and LabVIEW with NI USB-6212 8.5 as the acquisition...

  Here's my problem,

  I try generated voltage (DC) at my actuator that is Honeywell ML7420A series with spec:

  -Input signal: 0-10 or 2-10 Vdc

  -Power supply: 24 Vac

  As a first step, I'm going to the DAQ assistant express in the block diagram window, then choose generate--> voltage--> Channel Using--> test window.

  In this window, I try to run the sample voltage and the actuator answer immediately, I think that the problem would be nothing. So I click the OK button, here is my problem, the DAQ vi is not a stem of wire! The DAQ vi who must have a PIN for error, given out etc does not appear, I try again and it still the same as before, I even try to change the driver and nothing is happen.

  Are you know why it happen?

  Can you recommend me what am I should I use if I am not using DAQ assistant express?

  Thank you for your comments...

  Good afternoon!

  I hope you do well. We'll find the solution to your problem in the knowledge base article: why don't I have any input or output terminals on my DAQ Assistant in LabVIEW?

  Just go to tools > Options > VI server and make sure the "ActiveX" is checked.

  I hope this helps!

  Kim W.

• My description of my adobe muse Web site does not appear when I google my site

  So, I recently watched the tutorial Adobe Muse to increase the SEO of your site, and I followed all the steps perfectly. Always for some reason however, when I google my site www.unbalancedimage.com a description of my site does not appear. I don't know what is happening and I could really use help as soon as POSSIBLE to solve this problem.

  I recommend starting with tutorials on SEO in general. One of my favorites is this session Adobe MAX, last year http://2014.max.adobe.com/sessions/max-online/#/video/544>.

  The short version is that you first need to Setup Google Webmaster Tools. Google has documentation for that and a little research will also find tutorials for how to do specifically for a site of Muse.

  Once the Web Master tools is set up, Google has documentation to find out how to submit the sitemap.xml. Muse generates this file to the root of your site.

• SWF does not appear when you go back to the tab browser

  I had a report of strange bug on a web application that we develop.

  The SWF looks fine for the most part, but it's the user has several tabs open the browser moves to a different tab and then returned to the tab with the swf, swf file does not appear until the mouse scrolls on the swf.

  At first glance it looks like the swf is not redrawn until the user with her intereacts (we do a fair amount of mosue on election).  There she crept to save memory, the browser stops displaying the image and not redeisplay not until we explicitly have to redraw the scene.

  Has anyone meet a similar situyation?  I don't know where to start with this.

  Some potentially relevant aspects of the swf file:

  Most of the objects on the stage have chachAsBitmap set to true and that we apply a mask degraded to most of the scene, so there is a good amount of ongoing treatment and I know thishas caused a few other quirks to redraw.
  The pace is on a very slow 4 frames per second and film is flown by a timmer.

  All the tracks would be appreciated.

  The tester reported it was using Chrome 9.0.597.107 and Flash player 11.3.300.26

  your pace should be significantly with fp 11.2 + opening another tab.  the pace should return to normal when your new swf focus.

  You can use throttleevent from the scene to detect these events.

• Error popup does not appear when an exception is thrown

  Hello! I m working in an EJB - ADF application. I have a page where I try to delete an entity that is referenced by other entities in the database, so that an ORA-02292 exception is thrown. When this happened, a popup used to be displayed in the application with the error message. This is the behavior I want. However, my isn´t application showing the popup more. When I push the button Delete the exception is thrown and showed in the jdeveloper Journal, but the popup does not appear.
  I Don t remember doing any changes that may be causing this situation. It requires a configuration to make the popup is displayed?
  I m don't know if it was exactly when the problem started, but I ve spent 11.1.1.2 to 11.1.1.3 in the last days.
  
  Thanks in advance.

  Looks like it is related to this problem of model - level exceptions unexercised (EJB, 11.1.1.3)

  Pedja