DAQ Assistant no recorded data during the case structure is false

Similar Questions

• problem of data flow in the case structures (using a state machine)

  Good day everyone.

  I'm having a problem with the flow of data between the structures of the case.

  I try to use an example of a state machine for this simple problem. but when I try to send data of a box structure to change the State of the code. It will change not in the desirable output, instead, it offers the possibility that the exit options emul.

  could someone please point what I'm doing wrong here. Any kind of help would be very appreciated.

  With a quick glance at your photos a question you have is that you use not data flow. You write your status updated in local variables value. Your State should pass through the case structures are a single wire. Playback of your order "Enum", happened in the register shift on the right side of your loop probably get running and reading before any processing occurs within the structure of your business. That's why you're reading the old value of the State and not the update. or have a classic case of a race condition in your code.

• Running Exchange Server application of hotfixes and service pack to the server mailbox without loss of data during the restore?

  People,

  I would like to know how can I safely ask the Exchange Server service pack or cumulative update for the server role mailbox (no DAG) without loss of e-mail during the downtime and roll back the snapshot?

  If I can do the following:

  1. stop all Exchange Server services.

  2. unplug the vNIC on the mailbox server

  3 take a snapshot of the virtual machine

  4. apply the service Pack of Exchange Server / Cumulative Update or Windows Update

  5 reset

  6 reconnect the vNIC, if the server online with no problem, commit / remove the snapshot, if not, then disconnect the vNIC followed to restore.

  would be - this sense being or support for Vmware and Microsoft http://www.vmware.com/files/pdf/exchange-2010-on-vmware-support-and-licensing-guide.pdf ?

  If yu have any other suggestions, please let me know here.

  Thanks in advance.

  Hey AlbertWT,

  I'll start by saying that I would not do.  Microsoft is explicit that snapshots are not supported with Exchange when virtualized.  See below (from Exchange 2013 Virtualization: help Exchange 2013):

  Some hypervisors include features to take snapshots of virtual machines. Virtual machine snapshots capture the State of a virtual machine while it is running. This feature allows you to take several snapshots of a virtual machine and then return the virtual machine to a previous state by applying a snapshot to the virtual machine. However, virtual machine snapshots aren't application aware, and using them can have unintended and unexpected consequences for a server application that manages the data of the State, such as Exchange. Accordingly, making snapshots of the virtual machine to a virtual guest computer Exchange only is not supported.

  Even if we ignore the statement of support from shadow copies that isn't always a good idea.  Here are some things to consider.

  (1) cumulative updates for the Exchange to modify the Active Directory schema.  Roll back the snapshot on the mailbox server is not undo changes made to RFA, which could cause functional supported questions.  See this link to give you an idea of how there is pattern AD updates in each CU Exchange and service pack: the Active Directory in Exchange 2013 schema changes: Exchange 2013 help

  (2) it is possible to send to come during the time you test the update, and if you need to restore you would need a plan to retrieve this e-mail.  Third party services may work, or you can prevent the email to come in your environment completely during this period, but these aren't the ideal solutions.

  A much better solution would be to create a lab environment that is isolated from the production.  You can either take clones of your Exchange and AD VMs and put them in a closed network environment, or create a laboratory and import the structure of your ad if it matches the production.  I think it is a much better way to test than to try to rely on stereotypes in production.

  Hope that helps!

  Matt

• record data in the Spartan 3rd text

  Hi all

  I would like to kindly save the data table text file or a spreadsheet on vi using fpga spartan 3e as an fpga target. Once I added any function related to the file operation, he gave error that these functions are not supported by the target device.

  could you please help me with this

  Thank you

  Rania

  Hi David,

  Usually when using a FPGA target we want to assure you that we treat the data as efficiently as possible. In this spirit, we will be desirable to use a DMA FIFO to stream to our host VI. After the data is transferred to our host VI we can save the data to a text file using the functions in the file e/s palette. This is a very useful part of the help of the LabVIEW FPGA module, which deals with transfer data between devices or Structures using FIFOs.

  I also wanted to make sure that I provide you with our white book using DMA FIFO to develop some Applications High-Speed Data Acquisition for Reconfigurable i/o devices that guides you through the features, you need to implement on the FPGA VI and host VI. I hope this information helps.

  For more information, what equipment you use also and is your host, a Windows operating system or an operating system in real-time as well?

• increase the digits of accuracy in recording data in the file

  Hello

  In the attached VI written in Labview 8.5, can you tell me how I can save the data in the table to 6 decimal places?  From the code I posted, I can get up to 4 decimal places.

  Thanks for your help.

  hiNi.

  It looks like using 801, like the entry gives you many. Try to set it to 800, for example, and you get a lot of numbers in the worksheet (you may need to expand the cells to see all this while). Some of the numbers crunching manually (for example, using a calculator) and see if you get the same results for the first few points.

• Revel recording dates in the metadata?

  What date to Revel use metadata?

  I have some pictures with dates in Date fields and Date taken as seen in Windows Explorer, but always appear 'Unknown Date' when they are imported into a library of Revel.

  Hello CappyNear,

  I've heard some information today about the tags used to Revel today. Revel uses tags or metadata in the images, he says are still in the file. If you import your files into 11 elements, I found that the tags are still there and can be associated with elements. For your old photos scanned, I would try to set the date for the images.

  Thank you

  Scott

• Securing the data during the testing process.

  Dear all,
  Could you please plan ex how I can protect data of the company when debugging errors by developers.
  
  For example. When the error occurred in the database production, developer must take accurate account and need to rectify the problem as soon as possible. According to the ISO 27000, for access to production data could be banned.
  
  Pls help.
  
  Concerning
  Jamel Indika.

  ISO 27000 talking about sensitive data. Not all of them.

  so if developers to non-sensitive data, then you should allow that.

  Otherwise, you might want to evaluate Oracle wallet.

• Do nothing in the case structure with loop For

  Hello

  I am trying to extract data from my signal (0.3 0.4 0.6...). I want to extract values greater than 0.5 and put it in a table. If I use a loop For which I can determine each index of my data to be compared and it happened in the structure of the case. In the 'Real' box, I wanted the value to extract outside the loop For. And I want to "do nothing" if my value falls within the box 'False. ' However, it displays error, saying "' Tunnel: lack of assignment to the tunnel '."

  I tried to select 'Default', but it does not work since I use a Boolean comparison. I tried to use the registry to shift, but in vain too.

  Someone could guide me on this to extract only a value greater than 0.5 and index them?

  For example "0.6 0.7 0.8; 3 4 7 index.

  Satisfaction will be given.

  

  

  Here you have

• Synchronize the case structure with enum update

  Hi, I created a control enum initially with the "First" and "Second" values. In the block diagram, I created a node of this enum control property and it is connected to a box structure. The structure of business allows me to manage the condition "First" or "Second" correctly.

  I then modified the items in my enum so there is now a 'third party '. My problem is that structure business conditions still show as 'First' and 'second '; That is to say, I can't handle the "Third" condition My question is how to synchronize my case structure to show the updated enum values?

  VI, attached, the sample created with LabVIEW 2009 version 9.0f3 (32-bit) running on Windows 7.

  Thank you all for your help in advance.

  Michael O'Shea

  

  First tip: remove the value 'default' first case

  If you have done your VI pauses when you change your enum, which is a good thing.

  Now to synchronize, do a right-click on the border of the structure of the case and select 'add the case for all values', this is the option you are looking for.

  Tone

• The problems of security of the data during the recycling of a HP Photosmart Premium Fax all-in-One Printer - C309a?

  Given a document photocopied with a HP Photosmart Premium Fax all-in-one printer - C309a can be recovered later from the unit?

  I want to know if it is safe to recycle this unit, which was used to print, fax, scan, and copy documents that may have sensitive data. Some articles and videos on the net, it is clear that some photocopiers are vulnerable in this regard. I appreciate any assistance with this question - thanks!

  Hello

  Reset will erase everything. Please try: turn the power off, press and hold # and 6 while and for a few seconds after turning it on.

  Kind regards.

• Activating/Deactivating the program to sort data during the acquisition sets

  Hello

  I have a pledge Board of two channels that I use for recording analog signal flight time. I already have a program that records the signal and it is average, but I'm about to do my laser and a new experience that turns my detector at 40 Hz to 20 Hz. With this info, here is what I do:

  1. I need to record the signal of the FTT, as usual, however, I need to make a distinction between my data and my laser data.

  One idea I had is to somehow trigger the program after the initial outbreak, to indicate if the laser is enabled or disabled. Then, I could use a deal to build two data tables.

  A second idea is to use a loop for. Because a rep rate is two times more than the other, I can simply add the data of all the iterations, even to an array and the odd data to another. However, with this I have no idea what table contains the laser power data.

  The overall program removes subtables of the laser and laser data to make a substantive correction in real time. The idea is similar to a detector lock-in-amplify or sensitive to the phase except that I will subtract the phase signal output. Right now, I just need to make the distinction between the two types of incoming data sets.

  Thanks in advance

  
  

• Best-how-how to share data between the case of the event?

  ... more, which would be the best way to disable a case of event if another case of event has not run yet?

  I store the table a landslide enter a while loop that surrounds the structure of the event, then your data is readily available to any event.  However, you will need to wire data in and out of each case of the event table, which can be done easily with the connected tunnels.  If you need display the table of data as well, put an indicator inside the while loop while out of the structure of the event, connected with the registry to offset.

• Need all the data in the case where if I pass null

  Oracle 10 g version

  Hi gurus

  I appreciate if someone help out me.

  Examples of data

  as with a reference
  (
  Select 'AAA' crt_file, 'A1' scode of union double all the
  Select 'AAA' crt_file, 'A2' from dual union all
  Select "AAA" crt_file, null of union double all the
  Select 'BBB' crt_file, 'A1' scode of union double all the
  Select 'BBB' crt_file, 'A2' from dual union all
  Select 'BBB' crt_file, the double null

  )
  Select * reference
  where crt_file = "AAA".
  and nvl (scode, 'x') = nvl (& s_cd, 'x')
  ;

  Rule result

  I need to extract the result as in & s_cd and it works very well.

  but in case where if I put a value zero in & s_cd my query should return all data related to "AAA", something like below:

  Result if I pass NULL to & s_cd that then it shows all the results

  CRT_FILE, SCODE

  AAA A1

  AAA A2

  AAA

  Concerning

  Mitt

  as with a reference

  (

  Select 'AAA' crt_file, 'A1' scode of union double all the

  Select 'AAA' crt_file, 'A2' from dual union all

  Select "AAA" crt_file, null of union double all the

  Select 'BBB' crt_file, 'A1' scode of union double all the

  Select 'BBB' crt_file, 'A2' from dual union all

  Select 'BBB' crt_file, the double null

  )

  Select * reference

  where crt_file = "AAA".

  and (scode = & s_cd and & s_cd is null)

• Data during the execution phase - feet?

  Nobody had any problem with the upper distance display right watch FT rather MI, during an execution? I noticed that as soon as I change the playback screen, sometimes it shows feet and sometimes miles... I wonder... change miles after that race is detected?

  before reaching a.01 miles, the distance will be displayed in feet.

• How to keep Freecell data during the upgrade Windows XP to Windows 7

  that I upgrade from Windows XP to windows 7 Pro. I have years of freecell statistics. can that copy to the new windows 7?

  Thanks in advance...

  original title: data saved freecell

  Hi crcjetty,

  Try the method below and check if it works.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  (a) go to Start > run

  (b) type regedit and click OK

  (c) press ctrl+f

  (d) type freecell and click Next
  Look at the bottom of the screen and you should see the registry key you are is

  e) HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\FreeCell

  (f) in the top toolbar: click on register

  (g) click export a file of the registry...

  (h) in the window that opens: type the name of the file a:\Freecell.reg

  (i) check the selected branch under Export range

  (j) put a floppy disk in the A: drive

  (k) click Save

  ·         When you did a new install of Windows 7, put your floppy disk in the A: drive and double-click on the Freecell.reg file

  ·         Click Yes when asked if you are sure you want to add the information to your registry.

  ·         Click OK when advised that the information has been added.

  Windows Easy Transfer

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7