DAQ cards not selectable, that listed in MAX

Similar Questions

• lsdaq pci daq card not found

  Help!   I have linux redhat 5 and installed the last base of nor-daq drivers 3.4.0f2.   I see my Board from national instruments pci-6070e running lspci:

  07:04.0 class ff00: National Instruments PCI-MIO-16-1

  But when I run lsdaq, I he found nothing:

  --------------------------------
  Detect of National Instruments DAQ devices
  Find the following materials:

  --------------------------------

  Any ideas?

  Andrew,

  Thanks for the notice about the DDK.

  Wanted to let you know by putting the DAQ cards in another workstation linux also runs HR, the lsdaq have found the cards.

  I maintain there is no way to know the difference between mx and mx-Base without download them both and read the help files.

  Also the word "subset of the functionality" is also misleading because you have to change all the function names.

  Jonathan

• Not selectable in LabVIEW DAQ card

  I installed a PXI-6122 card. The device is listed as "Device is working properly" Max:

  

  Now, I want to select the device to a constant of the device in LabVIEW 2010, but is not listed there:

  

  I guess it has to do with how MAX recognizes the PXI card, see previous announcement.

  Does anyone have an idea how I could make this card works and selectable in LV?

  The problem has been resolved by the NI DAQmx developers:

  http://forums.NI.com/T5/Multifunction-DAQ/DAQ-cards-not-selectable-although-listed-in-Max/m-p/124778...

  Thank you very much!

• Ghost NI USB DAQ card readings

  Hello

  I have a question about the behavior of the NI USB-6218 data acquisition card.  Right now I use Labview to take several current readings of different channels to HAVE it.  I use resistors 250 ohms for each channel just as the instructions say to make the current readings.  I had an incident where he has been disconnected one end of a resistance at the entrance to the port.  I expected to see the reading go to zero, but instead, he began to piggback off the coast of reading one another channel give me a kind of 'reading ghost' because there was essentially no current crosses.  Playback of disconnected channel displayed the current reading of the canal connected even while values went upwards or downwards.  Can someone explain why the DAQ card would do that? and anyway to avoid this to happen?

  Thank you.

  A data acquisition uses a multiplexer to send a signal to the ADC.  Due to having only 1 ADC, you will get this effect if the ability has no way to bleed.  There is no way to avoid this if you disconnect the side DAQ, leaving the open input channel.

  You could try adding in some amplifiers specially designed for the shunts of currents.  I have used TSC103IPTwith success.  This amplifier gives you a single output is completed.  But I don't know what will happen with these if you disconnect one side of the resistance of the amplifier.

• MAX with replication DAQ cards

  Hello

  Hope someone could shed some light on this

  Its a long time since I've used Labview & MAX and am a little rusty right now.

  I'm trying to upgrade an old data acquisition system to a newer version.

  This is because originally one full working backup system was necessary, but because the old DAQ cards are obsolete,

  a simple update was necessary.

  Old system:

  LabVIEW 7.1

  MAX 3.1.1

  Data acquisition card: PCI-6023E

  New system:

  LabVIEW 7.1

  MAX 5.0

  Data acquisition card: PCI-6220

  There is no change in the Labview application.

  In the new 5.0 MAX.

  I'm trying migrate/replicate all virtual channels & settings of the old system.

  I managed to set up a new configuration using file for the acquisition of data from the old system.

  This resulted in the creation of chains of virtual of NOR-DAQ traditional under the District of data, which is what I wanted.

  But the problem is, all the channels received a red cross.

  Clicking on properties of the individual chain shows that no device is selected in the hardware section. There is none to choose from.

  Under devices & Interfaces,.

  The new card is correctly installed and running.

  Appears as > NI PCI-6220 'Dev 1.

  How can I make this device available in virtue Traditional NOR-DAQ virtual channels in the data area?

  Is it because the new MAX/data acquisition card requires the method task NOR-DAQmx to create virtual ways?

  I want to migrate channels instead of recreating that there are a fair few and each with their own settings.

  In the old system.

  Under devices & Interfaces,.

  That's what it shows:

  -Devices of NOR-DAQ traditional
  PCI-6023E (1 device)

  -OR-DAQmx devices
  -PCI-6023E: "Dev 1.

  The device is recognized under the District of data - Trad VC through NOR-DAQmx devices.

  I can attach a screenshot for systems if it would help at all.

  Thanks in advance!

  -Ram of Aust

  Bad news...   Your most recent 6220 is a M-series it is * not * supported by NOR-traditional DAQ.  This is why it does not appear as an option under the traditional OR-DAQ driver.  To use the most recent data acq card, you * must * swtich above DAQmx.

  Your old 6023E Board should be accompanied by one or the other pilot (but never both at the same time), so it may be be jointly installed a print while you set on the (tedious) company to recreate channels for your new Board in DAQmx.

  -Kevin P

• help on select M Series DAQ card

  I have type resistive sensor in response to the impact (special potentiometer). I want to first test its dynamic property (degree of sensitivity to the hose stream) and then to design a simple circuit to trigger an output transistor with threadhold predetermined impact.

  I need a DAQ card to save data to a tension between the potentiometer, and my output transistor. I felt a 250 kech. / s, and 16-bit (even 12) entry is good, and no requirement for AO / DO.

  I prefer to use a laptop for the data analysis. My questions:

  1 should be a type USB DAQ for this application? If this isn't the case, I will return to a PCI card.

  2. If the USB is selectable, I fight with the (USB - 621 x) Bus-powered and non-powered bus (such as USB - 622 x); insulated and uninsulated. Note that none of the supplied external DAQ isolated function.  Among my preference: USB-6221, USB-6215 or USB-6211, which is more suitable for my data acquisition?

  Thank you all.

  Sue

  Super! This morning, I decided to place the order with the USB-6221 and I am very happy that you assured me. Thank you, Khil.

  I acctually overlooked the phrase "single channel and aggregate" x 621. I have no doubt the rate of peripheral bus before but not found where was wrong. I also discovered that 6221 provides both sinking and DI I'll use two types of supply. Now I'm comfortable with the $ 200 more on externally powered one.

  Sue

• The search engine used to open the selections in a new tab. Is not doing that. How can I get that back?

  I prefer Yahoo search. In previous versions of Firefox, the search engine could pull the top of the list of possible sites. By clicking on the link would open this site in a new page. He is not doing that. There is no that opens the link forcing me to constantly go back to the place just to be able to close the new tab if it's not what I'm looking for. How can I get the old way to work again?

  Some added addons toolbar and anti-virus are known to cause
  Firefox issues. Disable all of them.

  Right-click on the link and select new open...

• Data acquisition in LabView for other suppliers DAQ cards that NEITHER

  Hello

  I am a beginner in LabView programming. I have a 32 channels base PCI card DAQ (i.e. PCI-1602 of the manufacturer, ICPDAS) and I want it to interface with Labview 8.5.

  So how cards DAQ in Labview 8.5, which are manufactured by other suppliers that NEITHER? Should I DAQmx (or some other driver) for that?

  What are the other drivers/components required to access of data PCI-1602 (device) of LabView 8.5 acquisition card?

  (1602-PCI card driver are installed in my win XP and dispalyed in Device Manager).

  Please provide some tutorial above mentioned the problem to interface.

  Please guide me in this regard. Thank you

  Waqar123 wrote:

  Hello

  I am a beginner in LabView programming. I have a 32 channels base PCI card DAQ (i.e. PCI-1602 of the manufacturer, ICPDAS) and I want it to interface with Labview 8.5.

  So how cards DAQ in Labview 8.5, which are manufactured by other suppliers that NEITHER? Should I DAQmx (or some other driver) for that? You will need the drivers from the manufacturer, of the Board of Directors.  In your case, "ICPDAS.

  What are the other drivers/components required to access of data PCI-1602 (device) of LabView 8.5 acquisition card? Same as above.

  (1602-PCI card driver are installed in my win XP and dispalyed in Device Manager). Ok.  Then take you care of my 2 answers above.

  Please provide some tutorial above mentioned the problem to interface. To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

  Please guide me in this regard. Thank you

  According to what you do with the DAQ cards, they can do the job however, from experience, there are some functions that I could achieve with the cards NOR that I couldn't with 3rd-party maufacturers.  This does not mean that this is your case. However, it is worth noting that it took me a while to understand why the code has worked with a single data acquisition card (NOR) but not another (Non-OR).

  The drivers that you have installed may or may not include examples and code in VI.  They may be DLL.  If this is the case, you can write LabVIEW "Wrappers" around these functions, as it will simplify your life.  If the drivers are in the form of DLLs, and there are no examples of LabvIEW or available VI, you must read on node library function call.

  R

• Windows mail. When sending a new email, I want to use the BCC field, that I can not select because it is not on the new Message. __How make CCB to come when I create a new message? This something __Is I can add tools please?

  Windows mail. When sending a new email, I want to use the BCC field, that I can not select because it is not on the new Message.
  How can I get the future BCC when I create a new message?
  Can I add tools please?

  Thanks for the reply Bruce Hagen. I am very grateful.

  Dave.

  In a new message window: view | All the headers. Check it out. Or, simply click on the button to easily add to your contacts list to: To, CC, or BCC.

  Bruce Hagen ~ MS - MVP [Mail]

• Windows 7 "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. »

  Get the message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. "I am NOT able to connect to the internet please help. I use Windows 7 OS

  Hi Odile,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the connection to the Internet and receive the error message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is active and running".

  
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. did you of recent changes on the computer before this problem?
  2 do you have wireless or wired Internet connection?
  Method 1:
  We'll first run check network troubleshooting if this can help.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
  Method 3:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
  For more information, please see the link.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• OTL - hours Type LOV is not in the list of payroll - job card

  Hello

  The list of values for type hours is not in the list of payroll - job card.

  I did the following basic for hours settings Type

  1 items created

  Certain "gains" as the primary Classification

  'Hours' as an input value.

  2. created set of elements.

  3 run the query 'Generate Flexfield and mapping of information' with the appropriate settings.

  4. two alternative names created by default because of the application Run, Enabled and disabled fields.

  5 creates an alternate name more by me with the following values

  Another name - OTL other name Type FDF context

  Name of the type: Elements of pay

  6 created tree preferably customized

  7. given the other name that is created by me in the preferences.

  Please let me know is there any other basic settings that do hours Type.

  Thank you

  Jose.

  Hello

  The problem is resolved.

  Previously I gave the element link to pay current dates from no previous dates like January 1, 1950 '. This is the error. The Link element considering i start date is January 1, 1950 ' and I'm the type of hours values in the time card.

  Thank you all for your valuable suggestions and spend time for my request.

  Thank you

  Jose.

• Player version listed in the GUI does not match that of the executable file (new)

  I've posted about this before (http://forums.adobe.com/message/4817948), but has never been able to find an answer.

  I am currently deployment of Adobe Reader versions 10.1.5 using the MSI installer and group policy. The problem is that a user stops his midway to Windows 7 computer while installation MSI interrupt (i.e. screwing) installation process. I had to remove some entries from the registry and restart the PC of the user in order to restart the installation of the reader (something I've done in the past).

  To verify that the drive has been installed successfully, I navigate to the Reader (AcroRd32.exe) executable Program Files, double-click the executable, select on Adobe on the Help menu, check the version number in the info box and see that the version number is 10.1.4 (i.e. the old version that I'm upgrading to). However, when I travel to the Reader (AcroRd32.exe) executable in Program Files and and open the properties of the file, I see the version 10.1.5 (i.e. the new version I am upgrading to).

  So the Player version listed in the GUI does not match that specified in the executable box.

  It's the second time that this has happened with a Windows 7 PC. I've never known this kind of thing with a PC running Windows XP.

  Why is the different version number in the GUI? Where the version number read to leave for the GUI? The registry? Anyone can shed some light on this situation?

  Hi Grittyminder,

  Remove some reg entries is not going to give you clean uninstall if you pouvez get a viable product. You can run this to get a better result: http://labs.adobe.com/downloads/acrobatcleaner.html.

  While I don't know what the problem is, it would be interesting to check the version of the product using the MSI API as described in the guide of the administrator to the www.adobe.com/go/acrobatetk.

  Ben

• Select the list with a shipment does not save to the database

  OK, I have a form with several fields (text, radiobox, selection list, display text). I have one of these lists of selection fill a display in the text field. When I chose a selection of the selection list, she filled the screen in the text field with the correct information but erased all the other information that was the inscription in the other fields. I searched the forum and found that the selection list should be a selection with mailing list and the branch page on itself, which works, but now these 2 fields information is not saved in the database. All other fields are saved, but not both. Anyone know what im missing? Thank you
  
  Deanna

  Hi Deanna,
  First the display as a text cannot insert data into the database. It can only display data from database. I guess you do not want the user to enter these areas, and that's why you use display as text field.

  There is a good way to resolve this situation. Say, you have 3 select list P1_ITEM1, P1_ITEM2, P1_ITEM3 in your page. For the change of P1_ITEM1 the screen Select the list and the LOV type in your query, assuming you want the value to be retrieved from a table. Therefore, type-

  Select emp_id, ename from emp;

  type the default value and null -1 and display null YESvalue. Make sure that under the type of source, you have the selected with the correct name database column.
  for P1_ITEM2 to the section LOV retype your query - i.e.

  Select mng_id, executive pay where emp_id = NV('P1_ITEM1') or NV ('P1_ITEM1') = 1

  Basically, this statement updating the data in the list select second after the first selection. type the default value and null -1 and display null YESvalue. Make sure that under the type of source, you have the selected with the correct name database column.

  Do the same for the third. It should work fine.

  I hope this helps.

  Kind regards

  Pascal M
  http://Tajuddin.whitepagesbd.com

• Why can't an iBook on iTunes in South Africa? They promote the iBooks and iBooks author on their Web site, but it seems that SA is not on the list of countries of distribution. Same tax iBooks are not available. Someone know why? Thank you.

  Why can't an iBook on iTunes in South Africa? They promote the iBooks and iBooks author on their Web site, but it seems that SA is not on the list of countries of distribution. Free IBooks are not available. Someone know why? Thank you.

  Liz...

  According to Apple eBooks aren't yet available > > I can buy on the iTunes Store in my country?

  Simply because Apple makes the promotion of iBooks does not necessarily that they are available in all locations.

  Sorry!

• selection of the daq card to get the angular position of 6 motors with encoder

  can you suggest me best daq card to use 6 positions of engines as outputs using encoders attached to the engines. I'll use single window for each engine. Or what can I use a single window for all the coders of engines?

  Hello Prabhakar7117,

  You need a counter for each encoder. Because you are going to use 6 encoders, you should get a DAQ hardware with 6 or more counters. Take a look at the PCI-6624 or PCI-6602. Another option would be a CompactDAQ chassis with modules that are able to access counters. Take a look at them.

  PCI-6624

  PCI-6602

  KB which cDAQ Modules can be used to access the counters of the shipped?

  Best regards

  Alina M