DAQ traditional support in LabVIEW 2010?

Similar Questions

• No material listed in Labview 2010 Linux DAQ

  Hello

  I have a problem with DAQmx Base 3.4.0 under Linux:

  mxbaseconfig shows my NOR-6009 device to the USB port. I can also create tasks corresponding to the nor-6009 in there. When I try to create a task in Labview 2010, one of the constant I/O are always empty. Dropdown menu arrow is grayed out. If I get the name of the device directly in the constant, he through me an error :-( Do not know Semms like Labview, which DAQmx Base instruments are connected...

  With devices VISA, I don't have this problem. All VISA devices are displayed in the dropdown of the constant and work correctly.

  lsdaq gives me:

  --------------------------------
  Detect of National Instruments DAQ devices
  Find the following materials:
  NEITHER 6220: "Dev1" (PXI1::4:INSTR)
  OR USB-6009: "Dev2' (USB0::0x3923:0x717B:0119B3BD: RAW)
  --------------------------------

  I use

  RedHat Enterprise Linux 5.5

  NI - 488.2 - beta - 2.51 b 1

  NI-VISA - 5.0.0

  NOR-DAQmx Base 3.4.0

  LabVIEW 2010

  All installers worked well...

  No idea how to access my OR-6009?

  Felix1234 wrote:

  It the device port ID is connected by a string variable to the Vi DAQmx Base... also works perfectly for me. But I do not know why the variable I/O noit work...

  DAQmx Base does not have controls that LabVIEW as DAQmx done [1]. Because the driver does not use background services, it cannot be said LabVIEW what devices and channels are available on the system.

  [1] NEITHER-DAQmx Base tasks and physical channels are not listed in the task of LabVIEW and string constants and controls
  http://digital.NI.com/public.nsf/allkb/57393FEDF313E99B86256F0B0010AD2D

• DAQ traditional Windows 7 (x 64)

  I changed to Windows 7 (x 64) of Windows XP, with a new PC (need more memory). I am programming for a PXI with LabVIEW Real - Time 2009 SP1 system. There is a map of temperature traditional DAQ running inside the PXI chassis. I read somewhere that traditional DAQ is not longer supported by NEITHER. In fact, the installer to update driver 7.5 Beta displays an error message on Windows 7 (x 64).

  I don't want to run Trad. Acquisition of data under Windows but on LabVIEW 2009 real-time. I have it takes rather to programming on my Windows host. Is there no alternative to the use of Windows XP?

  I think that it is not possible to use an in general for a NI 4351 DAQmx driver.

  For example, in the file Readme of NOR-DAQmx 8.0.1, I found the following information:

  Devices limited to NOR-DAQ traditional (old)

  
  

  NOR-DAQmx does not support the following devices. The following devices are supported only in NOR-DAQ traditional (old):

  ....

  Dataloggers for NI 4350/4351

• 4351 NI NI DAQ traditional for Vista deploy on RT

  We meet the following problem.

  We have several RT platforms with the advice of NOR-4351.

  We have developed the software on LV8.2 with XP operating system and now we are again moving PC (laptop almost) with Vista and LV8.6.

  We found that the traditional NI-DAQ support is not released the LV for Vista OS (unless the MAX reports that Tradidional NOR-DAQ 7.4.4)

  How can we solve this problem?

  Taking into account the fact that the software is deployed on the controller of the RT (PharLap)...

  Sincerely

  Hi Luigi,

  Have you looked into NOR-DAQ traditional (old) for the beta of Windows Vista?

  Another possibility: If you only install devices NI 4351 on the controller of RT and not the Windows PC, you may be able to deploy your application to the controller of the RT of a virtual machine (Virtual PC, VMware, VirtualBox, etc) that are running Windows XP and OR-DAQ traditional (old). (None of these virtual machine solutions supported PCI/PXI devices, but they can run LabVIEW).

  Brad

• The PSC-2000 is programmable with LabVIEW 2010 SP1 / Real Time 10.0.1?

  I have a PSC-2000 camera I want to use for a small project.  I see on the site OR that it is said»

• "Support for LabVIEW Real-time 8.5.1 and earlier" and "Support for Windows Vista and earlier versions.  It means that I can not use the latest version of LabVIEW (2010 SP1) with time real (version 10.0.1) running on a Windows 7 computer?  If not, what version of LabVIEW, real-time and operating system do I need?

When I tried to add a new target under LabVIEW 2010 SP1, the PSC-2000 was not among the choices.

As the support NOR documents indicate, you need LV version 8.5.1 or earlier to program the cFP-20xx devices family.  Version 8.5.1 of LabVIEW does not work under Win7.  You will need Windows Vista or something earlier like XP.

• How to sit interface with matlab 2010A and labview 2010

  I use tools of simulation interface 5.0 with matlab 2010A and labview 2010, I want to take my cue from matlab, labview but signal transfer, I am facing a problem. I want to know is there any compatibility issue in sit 5.0 or I do something wrong?
  photos of errors are attached.

  natasftw wrote:

  http://digital.NI.com/public.nsf/allkb/02F5FA55FC28BDE1862578A30071F975
  While it is for 2011, I doubt that they decided to remove 64-bit compatibility as they went forward as 64-bit has become more rather than less demand.  In this document,notes LabVIEW Simulation Interface Toolkit does not support 64 bit versions of MATLAB application software."

  The extent of the compatiblitly for 32 - bit, I'd take a peek at: http://digital.ni.com/public.nsf/allkb/D174674A91E5536286257428005C2426

  The OP's question was SIT support 64 - bit version of LabVIEW and 64-bit version of the MATLAB/Simulink itself, not the operating system software.

  Document in your second link is on a completely different topic to have API for LabVIEW and MATLAB/Simulink/RTW (well, mostly Simulink & RTW). Here is the relevant link for the 32-bit compatibility: http://digital.ni.com/public.nsf/allkb/049295038FF0EE2A86257A06006B2DAD is no SIT 64-bit.

  Other underlying issues is that Pharlap does not have a 64-bit version. Finally, simulations are better performed on some RTOS (embedded PXI) for a deterministic execution rather than PC operating systems.

  -BTC

• PCIe-653 x with DAQ traditional

  Hello

  We want to update some of our network using a PCIe-6536. Is it possible to run this card with traditional NIDAQ?

  Does anyone have experience with the PCIe-653 x with DAQ traditional. Or is it only possible to run this card with DAQmx?

  Greetings

  Oliver

  Hi Oliver,.

  PCIe cards not are usually not supported by the old traditional DAQ driver.

  In any case, you should consider updating your application to DAQmx as TRANS. data acquisition support is quite limited (see also the official statement of OR below)

  "Caveat ".  NOR-traditional DAQ
  (Legacy) is an older driver with the obsolete application programming
  interfaces
  (API) for the development of acquisition data, instrumentation and control
  requests for former of National Instruments DAQ devices. You must use
  NOR-DAQ traditional (old) that in some circumstances. Refer to the
  File Readme of NOR-DAQ for a glimpse of the two API NOR-DAQ, the
  benefits of
  NOR-DAQmx and more information about when to use NOR-traditional DAQ
  (Legacy)
  including a complete list of devices supported, operating systems,
  application
  versions of the software and the language versions. You can install the most recent
  version of
  NOR-DAQmx software, available at ni.com/downloads.
  "

  Kind regards
  Bernd

• MAX does not recognize NOR-DAQ traditional (old) devices * HELP

  I have a card PCIe-6259.  I want to use blocks of input-output in my program .vi (read Port DIO-DIO Port writing reading Digital Line), so I installed the version of NOR-DAQ traditional (old) devices 7.4.4.   But when I got to MAX (measures & Automation) and look on the left side under devices and Interfaces, I do not see the Tradional-NOR-DAQ tab; I see only the devices NOR-DAQ-mx, PXI, series and parallel system.

  Then when I go to run my program I get the error: error-10401 took place in a DIO Port Config Possible reason (s): NOR-DAQ LV: the specified device is not a product of National Instruments, the driver does not support the device (for example, the pilot exited until the device has been supported), or the device has not been configured using the Explorer Measurement & Automation.

  So, how do MAX to recognize that I have installed NOR-DAQ traditional (old) 7.4.4?

  Thanks for the reply!  I realized this too after going through the files for example... but thanks for the confirmation.

• Is the combo box drop-down "Targets" in LabVIEW 2010?

  Guy of OR,.

  In LabVIEW 2010, I installed the touch screen module but 'Touch Panel corresponding project' does not appear in the list of "Targets" of the "Getting Started" initial LV window. The Add/Remove dialog box confirms that the module is installed... Is - can be changed?

  Thanks in advance

  I think that the Touch Panel project should be added to the drop target when you install the Touch Panel Module.  As this isn't the case, I think it's a bug.  Thanks for pointing out that, and I will file a request for corrective measures to get changed for the next editions of LabVIEW.

  Kind regards

  Elizabeth K.

  National Instruments | Sales engineer | www.NI.com/support

• Labview 2010 8.1 Windows executables

  Greetings,

  My development computer is a Windows 8.1 with LabView 2010 Professional machine. I created a project and published an executable with success. Obviously this works on my development system.

  However, I have another machine Windows 8.1 (new installation, nothing about this). First, I installed the runtime Labview 2013 because (a) I thought that it would be compatible for older versions, and (b) it says it supports the Windows 8 operating system. Unfortunately when I tried to run the executable it gives me the following error:

  Could not locate the LabVIEW runtime engine.

  .. .requires a 2010 version (or compatible) Labview engine of execution. Contact the seller to [name of program] to correct this problem.

  Okay, so I uninstalled the runtime of 2013 and restarted. Then I installed 2010 thought that is what it takes.

  Gives me the exact same error as above.

  I saw similar problems of windows 8, but nothing I could find about it.

  What I am doing wrong?

  Thanks in advance.

  Why install the runtime 2013 when you have an application of 2010? You must also install the appropriate number of bits of the runtime.

  Why not simply create an installer?

• NOR-DAQmx for LabView 2010 SP1

  I am looking for the installation of NOR-DAQmx for LabView 2010 64 bit SP1 package?

  Yes.  Do not change the destination directory.  The drivers will be add support for any version of LabVIEW, you installed from LabVIEW 2010.  This includes 32-bit and 64-bit versions.

• Setup of NOR-time with MAX in LabVIEW 2010

  Hello

  I have a set of PXI systems running LabVIEW 2010 RT and want to start using NOR-time for my timestamp.   My systems have NEITHER time 1.0.1 installed and NEITHER-Sync 3.2.1 installed.  I have a system with a PXI-6682 card in slot 2 and got got to pull time of a GPS antenna.

  When I go to MAX on any of these systems, I briefly see "search sources of synchronization of time...". "in the settings of the time and then nothing.  I do not see the fields displayed in this screenshot:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/11466

  What Miss me?

  You reply to my message, looks like it is is not currently supported in NO-time 1.0.1 in MAX and will not be until the next version of NO-time.

• NI4350 (PCMCIA) and NI DAQ (traditional)

  I'm trying to get a NI4350 to work with VC ++. I downloaded and installed NI435X252, which is supposed to be specific to this device. When I use the Group MAX, the device appears and test panel shows that temperatures are read, if the equipment is operational. There is no other product OR installed on this machine.

  The problem is that when I use the functions in nidaq32.lib, I always get the response status-10403 (if the device number points to the device) or-10401 (if the device number is incorrect), so NIDAQ works. -10403 means that the specified device does not support the requested action. I get this for ALL functions that I tried to call, including AI_Read(), AI_VRead(), AI_Check(), DAQ_Rate(), SCAN_Setup(), Timeout_Config(), DAQ_DB_Config(), DAQ_Start(), when running the examples provided.

  Is there a specific startup sequence that is needed? I have not found something like this documented.

  Can anyone help?

  Hi aditus2,

  Installation is not without is a known issue with NOR-435 x 2.5.2, however the 2.5.1 version doesn't have this problem. It is the link below:

  NOR-435 x 2.5.1 - Windows XP/2000

  During installation, select the media of Visual Basic and LabWindows/CVI. This will install a few examples that you can model your application around. "" "" You will also be able to view a list of function under Start ' programs ' National Instruments ' NOR-435 x ' Documentation. Also to more completely answer your first question, driver OR-DAQ only supports devices 435 x with LabVIEW knowledge base by following the link:

  Can I program NI 435 x with NOR-DAQ function calls?

• Conversion of a VI that uses OR-DAQ traditional to NOR-DAQmx

  Hello

  I'm trying to convert a VI that uses OR-DAQ traditional to NOR-DAQmx.  I'm almost there, but when I run my new rear version number 'read' and 'scan' are not the same.

  In the original version the "number read" always came back as 1 and "scan" backlog is always returned as 0.

  In the new version, "number readings" and "rear scan" could come back with any value.  It's sure to shake my recording of measures and VI the interaction with the rest of the program.

  I have attached a light version of the VI for the old OR-DAQ traditional and new OR-DAQmx that illustrate this problem.  The two VI is written in LabVIEW 2011 SP1.  I would be willing to upgrade to SP1 2013 LabVIEW if it would help solve the problem.

  I would be grateful for any guidance.

  Thank you in advance.

  I think I did.  Use-1 to erase everything in the buffer when the program is waiting for the countdown to the end and then just ask for 1000 measurements when the countdown reaches 0.  Do not need the Scan back or number reading.  Also don't need to add the measure in table 1 at a time because I get them all at once.

  I enclose a copy of my solution for all those who might need to do something similar in the future.

  Gary

• Need help to convert DAQ traditional subvis DAQmx configuration

  I need to convert these screws (of NOR-traditional DAQ) to be used with a new data acquisition card that supports only NI-DAQmx.

  Please help me in this...

  Can I use the same traditional NI DAQ VIs with the NI PCI-6221?  If so, how? This device can be configured for NI DAQ traditional?

  NOR has several resources to help move tradtional DAQ DAQmx. A good place to start is the getting started page. There is a tutorial on how to transition. There is also the compatibility screws which replace certain traditional DAQ functions with wrappers around functions DAQmx. The DAQ example you posted is pretty trivial and really shouldn't take a lot of time to convert once you get a basic understanding of the DAQmx.