DAQBase or mx to create Labview 8.0 exe files

Similar Questions

• Stand-alone labview application (.exe file) does not run correctly

  Hi all

  I'm doing a labview application only to run on another computer (I never did this before).

  I went through the tools-> build application prompts and was able to build an exe file.

  the program is supposed to control a power meter and measures of power, then save them in a text file.

  When I run the exe, on the same computer, I compiled the exe, the program generates a text file to save data to, but he cannot communicate with the electricity meter.

  There are a few screws Sub and a dll file that are used to communicate with the electricity meter. Would it be possible that I am not say labview to correctly

  include these files when I create an executable?

  What are some common problems that arise when building stand alone applications that could be cause of my problems?

  And no one knows of any good tutorials on building applications stand alone in labview, other than the help files OR?

  Thanks for your help,

  Also, if you used the VISA, include the runtime with your Installer.

• How to develop the final application exe file that will work on PC not installed labview

  Hello

  I developed a labview application (I request manufacturers/builders and professional license).

  I generate the final exe file by the tools of-> built Application exe of VI-> fact file

  But this the application exe file runs only on machines installed labview. His works do not on the other PC.

  For the execution of the other PC I have to do.

  Hello Ramji,

  As you said, EXE is created by you and its nning ruou fine on the PC where you created such as LabVIEW is present there.

  So for LV CE, please create an installer and Add Installer/additional software required by your EXE.

  Look at the link for reference.

  http://www.NI.com/white-paper/5406/en

  Kind regards

  Leila

  CLD

• create the executable (*.exe) file

  I could create and executable file (*.exe), but it does not all libraries (*.dll) necessary, IE NIVIsSVc.dll, imaq1349.dll... So I was wondering if someone could guide me to create an executable file with all the necessary libraries to run on a different machine? I have LabView 8.2.1 and XP OS. My *.exe file is to capture an image of the camera (FirWire 1394) and save it in a file on the hard drive.

  Thank you

  Shaun

  SC1,

  Unfortunatley LabVIEW get where the drivers have been installed since. This is to ensure that the same versions of the driver are in LabVIEW and the installation program that you created. The best way to work around this problem in your situation is to reinstall the drivers from your hard drive. You can download the drivers on our website linked below. In the future if you plan to create many installers, copy the contents of the CD driver on your hard drive and install from there. I made a suggestion of product in the past, to make it an easier process. If you want that this so, please visit our product suggestion Center below the link.

  Drivers
  http://Joule.NI.com/nidu/CDs/fn/p/lang/en

  Suggestion of products Center
  http://digital.NI.com/applications/PSC.nsf/default?OpenForm

• Create an .exe file

  Hi guys. I want to turn my VI in an .exe file that I want to run it on another pc. How can I do? I have to install labview also on the other pc?

  Thank you

  You will need the length of LabVIEW engine (RTE) that corresponds to the version used to create the .exe, i.e. 2012 if created with 2012, 2013, if 2013. Unless you need a specific feature 64 bit I also suggest creating in 32 bits. A 32-bit .exe, with 32-bit appropriate LabVIEW RTE, will run on a 32-bit or 64-bit machine, was created in 64-bit only runs on 64-bit computers.

  As noted in previous posts, unless the version of LabVIEW Development package at the request of the manufacturer (professional development for example) would need you the add-on Application Builder.

• How to include a .lvlib in a generation that was created using a custom .dll file

  I am trying to build an executable in LV2010 which uses a .lvlib which was created using a Keyence .dll file. I added the .lvlib to the source as "Still included" files and I also added all the files "Always included." library .vi I always get the error message saying "Lack the external function" during the execution of the program. The executable seems to open properly on the development computer, but not on a secondary computer. Any ideas?

  Hi Harris,

  I would like to clarify a few points.

  -With all these configurations that you described above, the executable file worked properly on the development computer?

  -L'application works correctly on the development computer outside a build specification, just running in LabVIEW?

  -Have you tried to deploy the executable on multiple computers, and you see the same error on every computer other than the development computer?

  -Is there a software that must be installed so that the TMIF.dll to work? This software is installed on the deployment computer?

  It seems that the DLL is included with success, but for some reason, the function appears as missing. Also, I noticed that the error message has a: C at the end of the message, which makes me wonder - is this a C DLL or a Windows DLL (.NET)?

• Run the exe file without installing labview

  I created my labview in exe file. I need to run this exe file on another computer that have no application in labview. It is afficherapres when I try to run it. What should I do without installing labview application in another computer?

  
  

• Image analysis of LabVIEW or to work on an exe file

  Hello

  I have a labview program that uses the IMAQ Toolbox and works very well. But when I do an exe file and run it on a computer with Labview run time engine installed, I get errors that the Vision_Development_Module is not found and the sub live cannot be used.

  Could someone tell me what could be the problem and how I can solve this problem.

  Thank you

  You also need the Vision runtime installed.

• How to open an EXE file created with multimedia Builder

  I have to open some video files, which raise a series of my language class, and all of them are created in multimedia builder 4.9.7.8 version by some techinique of this school. And they show in. EXE file. who can help to let me know how to open it? Thks.

  Hi Robin,
   
  -What happens when you try to open the files now?
  -Don't you get ay code error or error message? If Yes, indicate the same.
   
  You need to use the software to open this type of file.
   
  Contact the school Department to get the same thing and then you can open the files successfully.

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484

• Cannot create a folder "new folder" file system 16389 error

  Please help me... with this problem. IAM are currently not in a position to able to create any folder or a file on CD

  SF

  You must remove the upper and lower registry filters.  The instructions are here

  http://www.TomsHardware.com/Forum/254601-45-file-system-error-16389

• How to use the backup drives before restoring, I created to retrieve my personal files, etc.. ??

  I own a Compaq Presario CQ56 109WM Notebook PC that I recently ran System Recovery to restore it to the "State of Out-Of-Box", due to a virus or accident or something that wouldn't allow the computer to start Windows. Beforehand, I backed up my personal files, photos, music, preferences, etc. on a set of 5 DVD + R discs. Now, the computer seems to work very well, to my knowledge, but I have no idea how to do for use these drives. When I finally managed to read in my disc drive, I found an .exe file on the first disk for the Recovery Manager, which of course, I opened, and he was supposed to create a folder on my desktop and open all my stuff. However, while the first disk that I received as a message error that says "Recovery Manager cannot restore the file 10.wim. Do you want to continue? "I clicked Yes, and he gave me the same message for files 11 - 19.wim, 2.wim and 20 - 27.wim. I have no idea what it all means. Also once it was done, I have a folder on my desktop, which has 3 other folders inside and inside of those is a ton of other crazy records and files, which I'm sure that my stuff is in PLACE, but the question is, HOW DO I ACCESS AND RESTORE IT ALL to WHERE AND HOW IT WAS? LOL PLEASE HELP!

  HP Backup backup many files that are unnecessary, most of your personal files should be in a folder with your old username in the "Users" folder This backup application is also known for being a pain.

  As to why you got the error, that looks like all the files have been extracted, it could be a defective DVD, something caused a bad DVD writing, etc..

  If you do not see a "Users" folder, I have probably start deleting the folder created on the desktop and make a new desktop or in My Documents. Then, copy the files of each DVD to this new folder. As soon as the record test running the. EXE file again to see if any better results.

  Another suggestion-go in Control Panel, Options files and check to be sure "Hidden files" appear.

  If all else fails, install 7Zip and trying to extract the. WIM files.

• "Storage insufficient to create the shadow copy storage file or other shadow copy data"(0x8004231F). "

  I have Windows Vista Home Premium (32 bit) and you cannot create a system restore point.  Despite all attempts, I keep getting the error message "storage insufficient to create the shadow copy storage file or other shadow copy data"(0x8004231F). "  There is a large hard drive space (90 GB free with)< 70="" gb="" used). ="" how="" can="" this="" be="">

  Hi rebick,.

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  • When was the last time it worked?
  • Remember to make changes to the computer recently?

  First of all, I would say that you unplug any external drive connected to the computer except the keyboard and mouse.

  This error message can occur if there is some system files corrupted on your computer. Suggest to run a SFC scan, which would be a search for system files corrupted on the computer and replace them.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11 after the scan finished, close the command prompt window reboot the computer and check.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista.

  For more information please visit the link below.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  If the step above does not resolve the issue, I would say that you create a new user on the computer account.

  Log on to the new user account and check if you can create a system restore point.

  1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click on create a new account.
  4. Type the name you want to assign to the user account, click an account type, and then click on create an account.

   http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Signature tool: you want to create a new key pair file?

  Greetings.

  Just installed BlackBerry_JDE_4.2.0.exe and got my 3.CS for key files

  Try to apply these

  BlackBerry JDE or BlackBerry JDE Component Package Users:
  1)   Double-click on the attachment.
  2)   If a dialog box appears that states that a private key cannot be found, complete steps 3 through 6 before you continue. Otherwise, proceed to step 7.
  3)   Click "Yes" to create a new key pair file.
  4)   Type a password for your private key of at least 8 characters, and type it again to confirm.  This is your private key password, which protects your private key. Please remember this password as you will be prompted for it each time signing is attempted or a signature key is installed.
  5)   Click "Ok"
  6)   Move your mouse to generate date for a new private key.
  7)   In the "Registration PIN" field, type the PIN number that you supplied on the signature key order form.
  8)   In the Private Key password field, type the password created in step 4.
  9)   Click "Register".
  10) Click "Exit".
  11) Repeat this process for the other .csi files.
  

  When I double-click on any of them, I get the following message:

  http://img14.Imagevenue.com/img.php?image=76703_Foro01_122_205lo.jpg

  When I type YES to accept the creation of the file pair, it does nothing.

  Really need help here, don't know what I've missed.

  Got this answer from support:

  "The error you receive is the result of not having the Java Development Kit (JDK) properly installed. The issue is provided in the following article in the Knowledge Base of the BlackBerry developers.

  The key signature window disappears after receiving the guest of private key
  http://supportforums.BlackBerry.com/T5/testing-and-deployment/the-signature-key-window-disappears-AF... "

  That solved the problem!

• Create a folder in the file system

  Quote from the old forum:

  Rohan Messages: 12 Join date: Jun 2008	Create a folder in the file system Posted the: July 4, 2008 06:06
  	Hi all I want to create a folder in the root of the blackberry device file system. Or you can say anywhere in the device file system I want to make a folder through my code. Is it not possible? How should I approach to achieve this? Thank you -Rohan

  gmay Messages: 231 Join date: Jun 2007 Re: Create a folder in the file system Posted the: July 4, 2008 10:53 To create directories, please see FileConnection.mkdir) http://tinyurl.com/63yj23 Gordon BlackBerry developer journal www.blackberrydeveloperjournal.com

  Rohan Messages: 12 Join date: Jun 2008 Re: Create a folder in the file system Posted the: July 7, 2008 02:12 Hi Gordon,. Thanks for the reply and the link. I've been there. But I don't get the use of FileConnection.mkdir) Can you please let me know how extract use mkdir? Thank you -Rohan

  Rohan Messages: 12 Join date: Jun 2008 Re: Create a folder in the file system Posted the: July 7, 2008 04:00 Hello After trying for a while, I get it how to use FileConnection.mkdir () in my code. But I am facing a problem here. When the mkdir() is executed, it gives me FileIOException: file system error Here is my code that attempts to create a directory called myDir try {} FileConnection fc = (FileConnection) Connector.open ("file:///store/home/myDir", Connector.READ_WRITE); If (! fc.exists ()) {} FC.mkdir ();

  
  }
  } catch (Exception e) {}
  Dialog.Alert (try ());
  }

  I even tried to give the path like 'file:///store/home/myDir/' because I tried to create a directory. But it also gives the same exception.

  Please let me know if I'm doing one any mistake here.

  Thank you
  -Rohan

  Rohan Messages: 12 Join date: Jun 2008 Re: Create a folder in the file system Posted the: July 7, 2008 06:10 Hello I think the problem is... BlackBerry does not allow a directory to be created in the folder /store/ the device. Because I am able to create a directory in the directory/SDCard /. Is this something that we cannot create a directory in the root directory of the device?

  Rohan Messages: 12 Join date: Jun 2008 Re: Create a folder in the file system Posted the: July 7, 2008 06:17 Hello I'm sorry to keep posting here because I'm trying various things in my code and got to know more. But I write as soon as I get a result, so that it can be useful for those who are looking for the same thing. I even tried to create a directory in/store/home/user/and it works fine. So that means, we need to create our directories in the directory/store/home/user or/SDCard /. Please correct me if I'm wrong. Thank you -Rohan

  yog123 Messages: 2 From: mumbai Join date: Apr, 2007 Re: Create a folder in the file system Posted the: July 15, 2008 09:49 Can someone explain this in detail... When I tried to create the folder on the memory card or memory in the camera, it gives exception as file system error... Is it related to any authorization or specific parameters... ?? JDE 4.2.1.16 8100 Simulator... Thanks in advance...

  Please make sure that the BlackBerry Simulator has been configured to support a micro SD card.  For this in the BlackBerry JDE by clicking on the menu Edition, by selecting Preferences, by clicking on the Simulator tab, then on the tab memory and filling of the size of the SD card and the SD card image settings.

  Hi yog123,

  The code you mentioned is valid, but I guess you make a small mistake here.

  Whenever you want to create a directory, you should give "/" after the name directory to inside the Connector.open)

  Just put "/" after the directory name "sp" in your code as shown below.

  FileConnection fconn = (FileConnection)Connector.open("file:///SDCard/BlackBerry/pictures/sp/",Connector.READ_WRITE);
  

  Please let us know if you still find no problem.

  Thank you

  -Rohan