DAS 4020/12 trigger

Similar Questions

• I need clarification das.failureinterval and das.iostatsinterval

  I hope someone can help me with this issue at the moment that it makes no sense to me.

  What is the point of having these two parameters? Why not one that integrates the two?

  If das.failureinterval and das.iostatsinterval are both set for 2 minutes, it will wait for 2 minutes before resetting the virtual machine.

  If das.failureinterval is set to 2 minutes and das.iostatsinterval is set to 5 minutes, it will wait five minutes before resetting the virtual machine.

  The availability guide does not seem explicit in this area. The only thing that sort of sense would be if...

  DAS.iostatsinterval is set to 2 minutes and das.failureinterval is set to 5 minutes, then the virtual machine should reboot after 2 minutes

  Is this correct?

  The availability guide emerged as the das.iostatsinterval is a backup to das.failureinterval control, but it does not say that the opposite is true as well...

  If someone could provide some clarification on these two settings I would be very happy

  Well, these two parameters are something completely different. I'll try to explain it.

  DAS.iostatsinterval is the interval which is used to check if there was a network or a storage during the last two minutes. This will be verified only after the number of seconds set by das.faulureinterval has been exceeded without no heartbeat of VMware Tools being received.

  So what it means for these values? Well I would probably always recommend to align them. There is no interest to be posted to the storage network/I/O for the last 5 minutes when you trigger the validation after two minutes of the absence of heartbeats, because it could have failed 2 minutes 15 seconds ago.

  So in your example the VM would be restarted two minutes after it failed, THOUGH she had none / network storage I/O 5 minutes which is probably likely.

• Response of Isolation always das.failuredetectiontime - 1?

  Of Duncan Eppings ' HA /DRS technical Deepdive ", I see that (with default settings) the following will happen:

  on 13 sec: a host that means none of the partners will ping to address isolation

  in 14 dry: If no reply address of isolation, it trigger the response of isolation

  on the 15 sec: the host will be declared dead by the remaining hosts, this will be confirmed by the missing host ping

  16 dry: will start the restarts the virtual machines

  My first question is: all these timings are the das.failuredetectiontime? In other words, if das.failuredetectiontime is set to for example 30000 (30 sec) then the 28 second an isolated potential host will try to ping the address of the isolation and make the response of Isolation action 29 seconds?

  Or is the answer of insulation hardcoded timings and it always happens at 13 sec?

  My second question, if the answer is Yes, the above, why is the recommendation to increase das.failuredetectiontime to 20,000 if having multiple addresses response of Isolation? If the above is correct, then it would make to the isolated potential host to test its isolation addresses 18 seconds and restarts the virtual machines will begin at 21 second, but what would be the gain of this really?

  You are right. I think that at a point that several instructions are merged into a single statement which is technically inaccurate. Sorry for the confusion,

• Mod_user handling in a table using the trigger

  Hello
  
  I have a table with two columns value ' test' and the mod_user. Currently, the table has a before Update trigger to update the mod_user as a user of the system
  Now, I need to change the trigger to meet the criteria below
  
  (1) in an update statement if I manually put the mod_user, then it should be updated such as defined in the update statement.
  
  For example:
  UPDATE test
  Value = 1,
  mod_user = "xyz".
  WHERE value = 4;
  
  In the scenario above mod_user should be updated to "xyz" in the table
  
  (2) if I don't talk to any term set for mod_user, the default windows user should be changed in the table.
  UPDATE test
  Value = 1
  WHERE value = 4;
  
  In the scenario above mod_user should be updated as a user of windows in the table
  
  The trigger statement, I used doesn't seem to work.
  
  CREATE OR REPLACE TRIGGER t_mod_test
  BEFORE the UPDATE OF value WE test
  FOR EACH LINE
  BEGIN
  : new.mod_user: = NVL (SYS_CONTEXT ('USERENV', 'OS_USER'), USER);
  END;
  
  Any suggestions on how I can do the work of scenario would be very appreciated.
  
  Thanks in advance
  DAS

  It looks like you want something like

  SQL> create table test(
    2    value number,
    3    mod_user varchar2(100)
    4  );
  
  Table created.
  
  SQL> create or replace trigger t_mod_test
    2    before update on test
    3    for each row
    4  begin
    5    if( updating( 'MOD_USER' ) )
    6    then
    7      null;
    8    else
    9      :new.mod_user := NVL( sys_context('USERENV', 'OS_USER')
   10                           ,user );
   11    end if;
   12  end;
   13  /
  
  Trigger created.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  create or replace trigger t_mod_test
    2    before update on test
    3    for each row
    4  begin
    5    if( not updating( 'MOD_USER' ) )
    6    then
    7      :new.mod_user := NVL( sys_context('USERENV', 'OS_USER')
    8                           ,user );
    9    end if;
   10* end;
  SQL> /
  
  Trigger created.
  
  SQL> insert into test values( 4, 'xyz' );
  
  1 row created.
  
  SQL> update test
    2     set value = 1
    3        ,mod_user = 'abc'
    4   where value = 4;
  
  1 row updated.
  
  SQL> select * from test;
  
       VALUE MOD_USER
  ---------- ----------
           1 abc
  
  SQL> update test
    2     set value = 2
    3   where value = 1;
  
  1 row updated.
  
  SQL> select * from test;
  
       VALUE
  ----------
  MOD_USER
  ------------------------------------------------------------------------------
  
           2
  JCAVEDDBC64\jcave
  
  SQL>
  

  Justin

• How can I create a trigger e-mail messages sets a phone when Gets an email from particulry?

  Hi team, support
  Customer email thunderbird whit, how can I create a trigger e-mail messages rule a phone dial when comes a word of the body particularly E-mail?

  Kind regards
  Alessandro.

  I don't think you can do this with ordinary Thunderbird. But this add-on

  https://addons.Mozilla.org/en-us/Thunderbird/addon/FiltaQuilla/

  allows you to run javascript or IIRC, launch an external program when a given filter condition is met. So this does not exactly provide an answer to your question, but allows a possible solution. '

• Wie installiere ich das Firmware update

  Airport of Das dienstprogramm teil mit, das ein neues-setting up-to-date Firmware available steht.

  Wie installiere ich dieses?

  Please check the following Apple Support document for help with the installation of the firmware from the airport.

• I can't get the move animation to automatically trigger the next slide

  Hello

  New to Keynote. I wonder if there is a way to trigger the next slide to load after doing an animation out, that does not involve having to make an additional click? For now, I have text that moves transition and get him out on click, which then leaves me a blank screen, rather than the transition to the next slide.

  Pointers or help with this would be really appreciated.

  Click the background of the slide from the slide that has the text animation: Inspector > Animations > Transitions:

  the value of the drop of Transition start automatically

  Enter an amout for the delay, if any

• MainStage stop drums trigger keyboard

  OK I have an Alesis V61 and MS3. It has 8 pads of the battery. I want to set up a very simple patch where all 61 note keyboard triggers ONLY a piano patch. I want one of the Eb trigger pads (2) - a handclap.

  I have 2 strips of channels, Yamaha Piano and Bluebird Drum Kit. The strokes I started with success of the drum pad. Everything is good. BUT the keyboard also plays samples of Bluebird, which is not good! How to stop the notes on the keyboard trigger the Bluebird Drum Kit samples? Thank you guys

  HA! After 3 hours of tinkering it worked (for me anyway). In the channel strip Inspector, MIDI input set none - kills the keyboard trigger the sample but not the pad... against intuitive but worked for me! Hope this helps someone else

• Second list linksbundig einer line mit first line, geht das?

  Hin of're out wie ich, ohne standig umstandlich mit Enter und arbeiten zu must, dass bei "Listening & characters" tab the second line exakt immer unter der Aufzahlung der beginnt line first?

  So:

  -hgwvbiwjfjjknfknlwekddsmfkdnlfkn, mn, msddduerhbfkwjnedoqiwjdlkwnck

  erferfwoef...

  Und NICHT:

  -hgwvbiwjfjjknfknlwekddsmfkdnlfkn, mn, msddduerhbfkwjnedoqiwjdlkwnck

  erferfwoef...

  Vielen Dank!

  Das ist Ihr Ziel?

  

• Present the version 7.0.1 download available for 8.0.1. Trigger the update begins a charge down and ending. Download and then 'connect to update server' that never connects. This has happened over a period of 2 weeks.

  My 7.0.1 program tells me there's an update available, 8.0.1...
  I trigger the update that downloads an installation program.
  When I restart firefox to get the update installed, restart and triggers a new window indicating that it contacts the server to update. This will continue to get in touch for 30 minutes with no established connection.
  To keep my browser to 7.0.1.

  Windows Vista Ultimate sp2 64-bit.

  Try the alternative and more simple way to download from here and simply run

  • getfirefox.com

• Midi trigger

  I think to migrate from protools to logic, but there is a function that I don't see on the parameters of logic

  can I start to record from a midi or key elements?

  How can I do that.

  Thank you

  Yes you can - you can learn any assignment of midi keys to trigger the main controls (and recording is one of them).

  Below, I attributed a C2 key on my Midi Controller impulse to start the registration process...

  Click on the image if it does not work...

  

• Airport Express via DAC or autonomous DAS to read files without loss of hi res?

  An airport express itself to the bottom of the sample of iTunes / music Pure even with out Ethernet and Toslink connection?  I'm debating whether to buy a high-end DAC to go with my AE play albums FLAC, ALAC, or if I need a DAS to do.

  So I have an iMac with iTunes and Pure music. I have my AE in an another attachment to my amp Sugden and Pre Amp. EI hard wired to Netwoto with the Ethernet cable and attached to Sugden pre amplifier via analog 3.5 mm to stereo RCA cable.

  Any advice would be much appreciated!

  Thank you

  An airport express itself to the bottom of the sample of iTunes / music Pure even with out Ethernet and Toslink connection?

  Yes, because the AirPlay Protocol is used on the media either wired or wireless and this Protocol is necessary for an AirPlay-ready device like the Express dealing with either analog or digital output stream.

  As you know the music Pure has been designed to read audio data directly to an audio interface (such as a DAC) which is connected directly to the computer. When connected to an AirPlay-ready device, she will have to work with what can support AirPlay. As you also know, music Pure offers a high resolution "streaming" ability, via NetSend service, but it is on a different computer by Ethernet, not an AirPlay-ready device.

• My existing flash has a 12 trigger voltage, 2V. Is it dangerous to use on a NEX6?

  After testing, my existing flash has a 12 trigger voltage, 2V. This will be acceptable to my claw NEX6?

  After the Sony specification flash search box and enter a request, I found that Sony does not encourage a trigger voltage of above 6 volts. I'll take that as a response that my flash voltage of 12,4 to endanger my NEX 6 trigger.

• How to trigger the dictation from the smart keyboard on the iPad pro.

  I use dictated on my iPhone and my iPad quite often.

  However on my new iPad Pro with the smart keyboard attached, I do not how to trigger the dictation from the keyboard.

  I don't see how to get the soft keyboard back to press the button of the microphone are there, such space suggested by some on this forum.

  This doesn't seem to work in the latest iOS Update 9.

  I would be fine with a hotkey, or have to invoke the keyboard of the shop, then press the button of the microphone, but I don't see how do either.

  When the Emoji button on the keyboard smart strike as the keyboard, the software keyboard emoji is displayed, the space but when I press the soft ABC capital but I cannot get to the regular keyboard with the microphone button.

  A possible alternative would be to use Siri to dictation trigger in recording a memo or another application, space but I didn't understand how to do this job either.

  Has anyone experience this problem and found a solution?

  Unfortunately I had to spend a good hour on the phone with technical support when they finally admit that it was an oversight by Apple.  I hope someone reads this post until they spend countless hours trying to understand something, but has no solution at the moment. Frustrated!

• ICH habe ein iPhone 5 EIB einen Grünen Leihaus so - leider hat das Telefon eine Icloud barrier was Verpackung und die original kann ich machen-ich habe Quittung vom auction

  ICH habe ein iPhone 5 EIB einen Grünen Leihaus so - leider hat das Telefon eine Icloud barrier was Verpackung und die original kann ich machen-ich habe Quittung vom auction.

  ICH habe keine possibility den Vorbesitzer rauszubekommen.

  ICH habe nur die Auktion Quittung ao wie die original Verpackung und Zubehör.

  has been kann ich machen das man das gerät entsperrt. René ja da ich der neue bin owners legal

  DAS Gerät kann nur durch den Vorbesitzer entsperrt werden.  Das ist der Sinn und der Aktivierungssperre purpose.  Sie soll verhindern, dass Diebesgut weitergegeben wird.

  See: Aktivierungssperre von "Mein iPhone suchen" - Apple Support

  Enter Sie das iPhone das Aktionshaus back. So ist're unbenutzbar.