DASYLab 5.6 will work with one nor 9171

Similar Questions

• All-in-one HP Officejet 7300/7400 series, it will work with Windows 7 and how to get the OCR software work?

  I have a HP Officejet 7300/7400 series all-in-one, it will work with Windows 7 and how to get the OCR software work?

  By installing complete software functionality of the HP cd or online installation and connection of the printer only when the installation says too much

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=391182#n193

• HP Pavilion HPE h8-1214: GPU EVGA GTX 750TI will work with my HPE h8-1214

  Hello. I plan to update my graphics card soon. Accoring to this, I have a card Mother Angelica. I read another post here of a user having a h8-1230 with a card Mother Angelica Revision2 , who said the EVGA GTX 750TI was inconsistent with this Council, and that he should look for a version of the 750TI MSI instead.

  I was wondering if the same applies to my PC because my model is older that the other user has been. I prefer to use the EVGA GPU version, as it is cheaper than the MSI one, but I need to know if it will work with my computer. If not, will the labour card ASUS model, or should it be MSI? The map I intend to buy is present (EVGA) or this (ASUS).

  In addition to this, does anyone know if the stock fans and 300W power supply provided with this computer would be appropriate for the new card, or not? I'm looking forward already pass the power supply, but I don't know for the fans. If I were to upgrade the PSU, 430W would be enough, or should I go with 500W? Thank you.

  If anyone in the future who might wonder, I had this GPU works on my computer, but I had to buy a specific version of the map and the way I got it to work was pretty weird.

  You need to buy this version MSI of the card, because the card itself has a switch on to change the UEFI to Jack supported BIOS Legacy. As far as I know, other versions of this card are UEFI only, and this computer does not support UEFI, so he needs a card that can run in the traditional way. It may look like a fit snug in the case, but it does not seem to cause problems and it cools very well with fans.

  I also changed to a block of power SUPPLY Corsair 430W, which seems more than enough for the system, even with the card to load max. You could go to a higher power, if you consider the upgrade of several pieces, or reuse the power supply in a more powerful system later. I have not upgraded fans in the computer and do not seem to have cooling problems.

  Now to make it work...

  I had some questions:

  When I first turned on the computer, it froze on the screen of the POST (the first screen with the HP logo). It would allow me to get into the BIOS, and it would beep 4 times (with long breaks between the two), before finally to a black screen with a cursor blinking and just stay there.

  What finally got it to work:

  I disconnected all the instructors of the map (cables VGA, DVI or HDMI), and then I turned on the computer. Without any monitor plugged, the computer should beep 6 times (the power button LED flashing with it), then the power led turns off. The LED went off as soon as I plugged my monitor into the computer (in my case, I used a VGA cord).

  For the first few seconds, the screen remained blank and does not save a connection. The computer is beeping intermittently for a while, then after about a minute my detected monitor suddenly a signal, and the screen displays the Windows splash screen. I was able to boot into Windows, all right, even if the resolution of the screen will be a little goofy, until you install the drivers.

  I jumped in the driver installation CD, and once it finished installing, I restarted the computer. Now, when it restarted, I had to do the same procedure I mentioned above so that he could start again. Now that the drivers are installed, I don't know if I'll have to do this procedure everytime I restart the computer (don't have not shut down since then), but since I rarely shut down my computer, it's worth it to me.

  Hope this helps someone else, because I know that I spent 10 hours searching for ideas before discovering this solution myself.

  Now that it is running, I have problems and I have run several graphics intensive games on it without any problem with cooling or power draw. It is very quiet, too. Even with a game running on high quality graphics, I can barely hear the fans when there is no other sound in the room.

• Will 1st gen magic mouse will work with the new Mac Mini?

  #1

  I'm going to buy a new Mac Mini and one of the options is to add a second magical mouse of gen. I have a first gen magic mouse. I guess this first mouse magic gen will work with the new Mac Mini, but I want to check.

  The old mouse Apple and any other generic pc mouse will work fine with the Mac Mini.

• HP Pavilion H8-1120: Radeon HD 6970 will work with my motherboard?

  Hello

  I currently have a HP Pavilion desktop computer. The product is H8-1120, with model #QP771AA

  My motherboard is Carmel2 (IPISB-CU), with an i7-2600, 350W electric chip and the video card Radeon HD 7570.

  I wanted to play some of the newer games on the decent quality (usually, I would need to run on parameters below and even reduce the resolution, just to get 20 + FPS), and so I recently bought a new GTX 750TI graphics card to improve my computer with. But I had the same problem that everyone else did, where their HP Board would not accept the new card and nothing has helped my problem.

  Now I'm back TI GTX750 and I am looking for a good upgrade from my current GPU, at a reasonable cost, and I absolutely want to know, 100% that I won't not motherboard compatibility issues with the new gpu.

  I was looking at the graphics card Radeon HD 6970 and Radeon HD 6850 cards. Both are a little better than my other current graphics card, and I will also update the food too 550-600W.

  No one knows for sure if I'll be able to run the HD 6970 graphics card on my motherboard, with a 600W POWER supply upgrade? I checked online and the Radeon Series 6000 was released to the year 2010, a year before my current BIOS (FRIEND 7.16 / 10/05/2011) was released. My BIOS will be able to work with this graphics card?

  Bozhidarc, welcome to the forum.

  The reason why GTX 750 it won't work in your computer is to UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  I know the last video card that requires no UEFI EVGA's GTX 660.  Anything after this model requires UEFI.  The best thing to do is to find the card you like and contact the Technical Support of the manufacturer to ensure that it will work on your computer.

  MSI is a GTX 750 Ti with a BIOS card hybrid switch that allows to work with a standard legacy BIOS or UEFI.  Yet once, however, I recommend to contact MSI to ensure it will work with your computer.  I heard some members who have managed to make it work with the BIOS of their inheritance.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Palm Desktop 4.2 will work with Windows 7 x 86?

  I'm looking to move from XP Pro to Vista to Windows 7 x 86.

  Palm Desktop 4.2 will work with Windows 7 x 86?

  Hi P1pedream,

  You can check the link to check the system requirements for Palm Desktop with Windows 7

  http://KB.hpwebos.com/wps/portal/KB2/common/article/32991_en.html

  If you upgrade one it to Windows Vista or Windows 7 Windows XP, then refer to the following articles:

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

   

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

   

  Upgrading to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/products/upgrade

   

  The upgrade to Windows 7: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/upgrading-to-Windows-7-frequently-asked-questions

  Hope this information helps.

• Original title: A new version of windows will work with my Windows XP?

  Original title: A new version of windows will work with my Windows XP?

  My computer needs a new startup disk, as I lost the original. Is it possible to buy a new one with Windows 7 or XP?

  Why do you think that your computer needs a new boot disk?

  It would be surprising to find a genuine Windows XP CD in the retail market (a store) these days, but you can make Internet purchases and may not be no need to buy one at all because it's nice to make just a copy of one from a friend.

  It is a good idea to have a couple of different bootable CD in your arsenal in case your XP problems a day and do not start.

  I find that most people can get by with a bootable XP Recovery Console CD you can do (no XP media required) and a Hiren boot CD.

  I've never seen a XP problem that I can't solve if I at least so many of those - and they are free to do, and you don't need any Microsoft original media to create.

• [p7-1240] How can I find out what graphics cards will work with my motherboard?

  I recently went through the nightmare of trying to install a Gigabyte GTX 650 in my PC. After a few days of struggle and scouring the internet for answers, I discovered that it is not compatible with the BIOS on my motherboard, and HP does not update the BIOS. I returned the card and is now seeking a new, but I'm not sure what card works now, since my computer meet the requirements of system for the graphics card and it stil ldid does not work. Because the GPU manufacturers do not list the specifications of the BIOS under system requirements, how can I know if a graphics card will work with my system?

  My computer is a p7-1240 with a 520W PSU upgrade and approximeately 11 "of space to install the card.

  Thexn, welcome to the forum.

  The problem is a lot of video cards latest require the computer to have a complete UEFI BIOS.  HP began using one in mid-October 2012.  Before that date, the BIOS is the legacy.  This is why the video card does not work with your computer.

  I don't know what you would spend on a card, but MSI is a GTX 750ti which is a VBIOS hybrid.  It has a switch to change to inheritance or UEFI.  Is there a video link directly below the image of a card.  Paul of Newegg gives a complete description of the map.

  I like the best EVGA cards.  Their Support gave me a lot of information on their cards.  However, you will need to return to a GT 640 map to find one of their cards that does not require the UEFI BIOS.  They have a few updates for their BIOS' are which solves the problem, but we must call them for accurate maps.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• My speakers Altec Lansing ADA745 will work with my 530 s the new Dell Inspiron PC?

  My speakers Altec Lansing ADA745 will work with my 530 s the new Dell Inspiron PC?

  I watched updates of the audio driver for my pc and am not sure which one I need or you can even use it.

  Although "4.1" speaker systems are very common, the ADA745 should work without problems on a new system.  I have no connection to the ADA745 info but I guess it would connect everything as you are currently connected to the old PC.  New systems PC audio supports up to 7.1 speaker (with the most common 2.1 or 5.1) systems.  There is no drivers for speakers, however, you need to define the types of speakers in the control panel (e.g. article 4.1, and if this isn't an option, try the 5.1 and see if works well).   Printed with the new PC installation worksheet should detail the audio connections and if not, there is a copy of the Dell manual loaded on your PC and it has the details on the back panel connections.

  In Vista, the sound control panel is accessible by Start/Control Panel/hardware and sound/Sound.

• The Officejet 7140xi will work with Windowds 7?

  A friend has offfered me an old HP Officejet 7140xi All - in - One Printer.  I need a document scanner.  It will work with Windows 7, or do I have to install Windows XP on my old laptop?

  Hi rbj1933,

  Welcome to the Forums of HP's Support. I see you want to learn more about the drivers available for the portable printer Officejet 7140xi.

  There is a full feature software and driver for this printer for Windows XP, but there is only a print driver available for Windows 7 Microsoft base. I have included the document installation of the printer software in Windows 7 for a USB cable connection to see again you. One of the frequently asked questions is how to scan using the basic print driver. I recommend you read this article before decide you if you want to install Windows XP or not.

  I hope this helps!

• Upgrading the video card and power supply, these will work with my system?

  Hello, I am wanting to update my graphics card as my current one is finally fall behind on current games, BF3 beta is a restless nighmare and BC2 must be smooth running low (ick). I was satisfied with the weaker graphics for now, but its time for an upgrade. In any case, I think I have my selected updates and I just want to confirm that they will work with my computer until I pull the trigger. My current equipment:

  HP p6180t

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4010451&LC=en&cc=us&DLC=en&lang=en&tmp_track_link...

  Intel Core2 Quad 2.83 GHZ

  8.00 GB RAM DDR3

  Vista 64-bit

  Creative Sound Blaster X - Fi Audio Xrteme

  1.5 GB NVIDEA GeForce GT230 [DVI, HDMI, VGA]

  I plan on upgrading the graphics card on an Asus NVIDEA GeForce GTX 560 (Fermi)

  http://www.Newegg.com/product/product.aspx?item=N82E16814121446

  And the power of a passionate Corsair 850W 80 + CERT (I know this is perhaps an exaggeration, but I can update to motherboards in the future to run two SLI cards and do not want to upgrade again)

  http://www.Newegg.com/product/product.aspx?item=17-139-009&SortField=0&SummaryType=0&PageSize=10&PUR...

  I removed the side panel to check the dimensions of the new card and it looks like it fits. The only thing that could be a problem of release the cables SATA for the hard drive and hard drive because they are both plugged into the two slots, I don't think that the two superiors would be no problem at all. Depending on the thickness of the new card is also, it may be very close to the sound card that is spaced only a slit above the graphics card. I have another location available PCIe x 1 go back one level more that I should be able to plug the sound card in if there is no problem.

  My question is that these two will be compatible with my system? (physical limitations side)

  Also, can I change which SATA plug the hard drive and disc plug in, without having to reformat? Is it just unplug and plug in the new housing? (setting power off + unplugged of course) Basically passing SATA0 and SATA1, SATA2, and SATA3. Or do need to be filled in order? (0 then 1 then 2, etc...)

  Finally, If I can't move the sound of a standard card, do I need to do anything other than the physically move when the computer is turned off and unplugged?

  Any help is appreciated, thanks!

  John

  jkalbin,

  You have thought through all scenerios. Move the sound card does not any problems. The hard drive should stay in header SATA 0.

• InDesign CS5 will work with MacOS Sierra?

  Has anyone tried to see if InDesign CS5 will work with MacOS Sierra? I have creative cloud and CS5 on my machine, but due to some of the things that I have to work that only work with CS5 to CS6 I have to keep my old software. I hesitate to upgrade to Sierra until I know if InDesign CS5 will work or not.

  If anyone has tested this, I would be recognizing the return flow, thank you.

  It really depends what you do with it, and a large part of the framework has changes in the operating system for how the application is designed to run in. Your workflow can cause problems when the application works for others or you might be able to use it, but keep in mind has more no support for CS5 Adobe or Apple, so do not expect to solve any problems that you can discover.

• It will work with former apple TVs remote?

  I just wanted to see if this new remote will work with previous Apple old tv. Anyone know? Thank you

  N ° the older Apple TV does not work with the new type of controller.

• A Capsule of 1 TB will work with OS 10.11?

  Because I like to keep all my Apple hardware, I was looking at getting a Time Capsule backup to my new iMac comes with OS 10.11 (El Capitan). My question is this - can anyone tell me if an older model of 1 TB (MB277LL/A) will work with my setup?

  Thank you

  Carl

  This model was abandoned more than 7 years ago and is officially classified as "obsolete" by Apple, which means that if you have a problem and are willing to pay, Apple still will not help you with this device.

  Most of the 1st Gen Time Capsules failed in about 18 months. Few make it to 36, and very little done to 60 months, so unless the model you are looking at has a new power supply and new hard drive that was installed in recent years, it would be best to stay away from this model.

  If the product has not been updated with a new power supply and hard drive, it's almost a miracle if it does not work.

  Assuming that really fall into place, you will need to check to make sure that the time Capsule has firmware version 7.6.1 or later version to make it work with your Mac using El Capitan.

• A HP Officejet H470wl will work with the MacBook Air

  A HP Officejet H470wl will work with the MacBook Air? The driver is still supported? I'll buy an Air.

  Hello..

  New Mac come with v10.11.x El Capitan pre installed.

  I checked for compatible drivers (software) for pinter them HP > http://support.hp.com/us-en/product/HP-Officejet-H470-Mobile-Printer-series/3434 453/model/3434454/document/c04510394 /

  Fact on the Mac, you would use Software Update to install the drivers according to the HP website.

  Printer and scanner software available for download for your Mac