DASYLab Autosend Email module

Similar Questions

• DASYLab DURATION: unknown module

  Hallo!

  I need assistance with my Dasylab. I use Dasylab on Win 7 and Win XP. The full version works fine.

  We now have a version of the Runtime for our client. When I try to open the pre-build worksheet I get an errormessage that there are some moulds unknown in the worksheet. That the modules are circular buffer, write and read global variables.

  I can open only the sheet, but it is not possible to turn the page.

  Can anyone help?

  Thank you very much and have a nice day.

  Dominik Hilbrich

  Hello cj,.

  Thanks for your response!

  I found the solution to my problem, I installed the trial version. After the trial version is uninstalled, there was data that was not deleted. After the deletion of these data manually I have not problems any longer.

  Thank you and have a nice day!

  Hilby

• DASYLab Write Data Module output Format

  When writing the fields in an output file in ASCII mode with the option writing data Module and copy entries, entered the order in writing? Or, if the output field order can be changed? I guess the order of the output being written is 0. n. I can redraw the module so that the entry order corresponds to the order of output you want, but it makes the messy Visual design. I would like to be able to specify that the entries (copied to the outputs) are 1.n and written as 0.. n-1 and the 0th entry is written to the nth output. If I can manipulate their order in the module or do I redirect the entries to match the order of final output?

  Thank you

  The list of strings in the target file is determined by the entries in the module. They are always written 0... n.

  There is no way to change the order inside the module. You need to link the entries in the order you want to that they have written.

  The option of copy entered in any module is simply a way to keep tidy worksheet. It allows to "pass" the module. No processing is done, and the output channels are exactly the same as the input modules.

  Checking the option in the module to write data does not affect the file that is created.

• Impossible to get more than 1 channel to read with DAQmx cDAQ-9172 under Windows 7

  I have the cell load, voltage, and input thermocouple connected to a cDAQ-9172. My sensors entries have been scaled and verified in MAX, and all of them work.  DASYLab 13, the driver is "dcDASY.dll" and the hardware configuration is "NI MAX.

  When I add a task NEITHER-DAQmx Analog Input (that is, a set of scales) it appears correctly. If I add a second channel of the task and select it, I get this message:
  'Channel of task name saved with the module is not available. DASYLab resets the module parameters for usable first channel name task. »
  The name of the task remains the same for each new channel I have Add. If I change the name of the task by using the tab to the drop down menu, it says:
  "You have configured several ways out for the module. If you modify the task, you lose the settings. You want to change the task? »
  Both display the same data channels, and I can't work simultaneously several channels. It seems I missed something obvious, but I can't.

  The parameters are:

  Measurement and Automation Explorer 4.6.1
  NOR-DAQmx 9.0

  Material:-cDAQ-9172
  Slot 1 - NOR 9215 (0-10 Vdc analog voltage)
  Slot 2 - NEITHER 9211 (thermocouple)
  slot 3 - NI 9481 (relay)
  slot 4 - NI 9237 (entry deck w / excitement)
  housing 5 - OR 9402 (DIO)
  slot 6 - NI 9263 (0-10 Vdc output analog)

  Thank you

  You can't perform different tasks (continuous) HERE on a single chassis. The first tasks that starts will be 'the resource booking '.

  Combine the AIs of the various modules in a single task (see photo): start by creating the task of thermocouple. Then add AIs 9237 (e.g. Kraft) and 9215 (volts) using the button with the blue, symbol. Set the mode of synchronization of the task of "continue". Save the task, start DASYLab (second photo).

  Change a task (adding channels, etc.) to the MAX while DASYLab works always, will result in unexpected behavior. To synchronize the configuration of MAX with DASYLab, you will need to close/restart DASYLab or use the 'sync' of the function (see photo 3 "syncmax.jpg"). You can set this function as a shortcut by right-clicking on one of the eight green or grey circle things.

  You should think about an update of the MAX/DAqmx drivers. 9.x is a little outdated.

  Updated at least DAQmx 9.9, better 14.x or 15. 0 (stay far 15 1.x).

• I can not open emails in Hotmail even though I disabled all the plugins and modules.

  Since this morning, I can't open the emails in Hotmail, or open any folders therin. I deactivated all my plugins and modules that actually no difference. To the best of my knowledge, no updates were made to Firefox on my PC yesterday.

  Thank you for that. I managed to solve the problem of resetting Firefox, who presumably had the same effect as your solution by deleting the cookies etc.

• How many channels can I write to a file with the data Module write (Dasylab 12.00.00)?

  I would like to write data from a large number of channels (up to 128) in the same file. Thanks to the write data module, I have up to 16 channels only! The only solution I found is to save data in different files 8... Is there a solution for this problem? I use DASYLAB V.12.00.00. Thank you

  You can use the multiplexer unit, this will allow you to compress the 16 channels in 1 which saves up to 256 channels in a single file.

  In the module of the file to write, you can then select options and, under the "input Type", select the values of mixed singles.  You will then need to define how many channels in each entry will receive.

• DASYLab Lite, CompactDAQ Ethernet, "the stream blocked by a later module" error

  I receive the message 'the stream blocked by a later module' and then the execution stops. I tried to remove the modules without change. He usually stops 8 minutes, 20 seconds (500) in the race. It happened on two different computers (same network, however). How can I get my program to run longer (forever?)?

  I am using a cDAQ NI 9188 (CompactDAQ Ethernet chassis), NI 9237 (strain gauge module), NI 9211 (thermocouple module), OR-DAQmx 9.5.1 and DASYLab Lite 12.00.01. My program of DASYLab affect strips from 100 Hz sampling frequency. The calculation of the average (reduce) block performs an average arithmetic with the size of the interval of 100 and a block size of output of 1.

  

  Thank you!

  Which module complains about being blocked? Look at the title bar of the message - it should show the name.

  You can observe the locking by turning on pre-trial block view-Animation-FIFO.

  I am suspicious that average organizes blocks more were awarded.

  One thing to try and really monitor your computer after doing this...

  Go to the Options menu in the spreadsheet view, then open the General preferences. Change these two settings - see the image - turning them off. The risk is that your application uses too much memory, so, please, provide oversight.

• I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  To do that you will need to change the varibles PID values and then use the sliders to add numbers to a latch for variables that point.

  This is how I think it works in Version 8.

  In all cases, you should move on to 12 more stable summer.

  In addition, unless that is a very slow process, I generally do not like closed loop PID with DASYLab due to the fact that computers is not reliable with timing.

• How can I recover the modules (phone, email, company, etc.) using UserProfile?

  Hello.

  I am using Ldap.

  How can I recover the modules (phone, email, company, etc.) using UserProfile?

  I used this code () .getSecurityContext () .getUserProfile () ADFContext.getCurrent with methods to get, but it will always return null.

  Kingsley_R , rohanwalia

  Guys I found how do!

  Copy the following code

  
  

  IdentityStore idmStore = null;

  SecurityContext secContext is ADFContext.getCurrent () .getSecurityContext ();.

  try {}

  JpsContextFactory ctxf = JpsContextFactory.getContextFactory ();

  JpsContext ctx = ctxf.getContext ();

  LdapIdentityStore ldapStore = (LdapIdentityStore) ctx.getServiceInstance (IdentityStoreService.class);

  idmStore = ldapStore.getIdmStore ();

  SimpleSearchFilter userNameSearchFilter = idmStore.getSimpleSearchFilter ("Username", 1, null);

  String userNamePattern = ' * ';

  System.out.println (replaceWildCardChar (userNamePattern, userNameSearchFilter.getWildCardChar ()));

  userNameSearchFilter.setValue (replaceWildCardChar (userNamePattern,

  (userNameSearchFilter.getWildCardChar ()));

  SearchParameters sp = new SearchParameters (userNameSearchFilter, SearchParameters.SEARCH_USERS_ONLY);

  SearchResponse sr = idmStore.searchUsers (sp);

  If (sr! = null) {}

  User user = null;

  While (sr.hasNext ()) {}

  user = (User) sr.next ();

  If (user.getName () .equals (secCntx.getUserName ())) {}

  System.out.Print ("User is" + user.getUserProfile () .getUserName () + "user undertaking is" +)

  (String) user.getUserProfile () .getPropertyVal ('company') + "user Department is" + (String) user.getUserProfile () .getPropertyVal ("department")); "."

  }

  }

  }

  } catch (JpsException ex) {}

  System.out.println ("Impossible to establish the context of jps!" + ex.getMessage ());

  } catch (IMException iex) {}

  System.out.println ("Impossible to establish the context of jps!" + iex.getMessage ());

  Logger.getLogger (Grnt_page.class.getName ()) .log (Level.SEVERE, null, iex);

  }

• modules in the campaigns of emailing

  Hi I am looking at e-mail campaigns at the moment and just thinking how would I modules work in email? Is this something that only works until the liquid becomes available with emailing campaigns? or who don't won't happen? The hope that it would be easy for a client to send just a model of blog post with their recent messages and it would work? But his is not going to be sensitive or have all the styling work is it? It would be much appreciated if I could get some info on this.

  I just found this customization of Modules and Web applications in Email campaigns in the forums. If you need create a separate installation for e-mail model.

  If there is a better way could someone please let me know?

  Thank you

  Luke

• Customization of Modules and Web applications in the campaigns of emailing

  Hi, I've customized the Blog Module for a recurring (ongoing?) email campaign so the last blog posts display in a sensitive e-mail template. It works beautifully. When the module is inserted in the email he reads {"module_blogsitepost, template="/Layouts/enewsletter-bloglist.tpl 3, "} .

  I wonder if the same approach can be taken with web applications. At the moment two views of my app list are used by the site itself. I would like to customize a third discovered then the last app web objects appear in the same sensitive e-mail template.

  Is this possible?

  See you soon.

  Anthony, I thik the thing your suite of not which is the model = feature of modules must not tell to the module to use which model. It is the most recent function to define your own model for many modules.

  So for an application, you must put in a web app module then do what you did above to set to read a new model.

• The tool at the top of my Thunderbird email button doesn't have an option 'open module '. I have an add-on downloaded from Mozilla, how do I add to Thunderbird

  Maybe there's another tool button somewhere, but the only one I can find is when I write a new message. I have 4 options under the tool button; mail and newsgroups, address book, account settings and options. No where in these 4 find 'open module. I downloaded an add-on of highlighter recommended for Mozilla's Thunderbird, (highlighter by André Rodier 0.6.5) but I can't understand not just how to get it in Thunderbird! Thanks for your help.

  You challenge do not use the Menu bar in a window of writing.

  You must learn the shortcut of Windows to show hidden menu bars.
  Alt or F10 displays hidden menu bars.

  In the Bar Menu of MAIN WINDOW, select Tools-Add-ons
  Click the gear icon and select install module file

  The other option is to use the AppMenu. It's 3 horizontal lines. There is a choice of add-on in this menu.

• How can I autosend copies of all email to a single person

  My boss wants that copies of all emails that I send, but it's hard to remember when sendin several emails to copy him on them. Is there a way to auto add a person in the field of the copy? without having to do it manually?

  'Tools' > 'Account settings' > 'Copies and files '.
  or
  Right-click on the name of the e-mail account in the folders pane, and then select "settings".
  then select 'Copies and files '.
  Select; "bcc these email entry addresses the patron's e-mail address.
  Click OK

  then when you click "Write" to create an email, the BCC field will be auto filled the email address, you don't enter it each time.

• How is measured the activity "no email" in the E10 Lead Scoring module?

  I'll put up the section of the commitment of a new track marking the model, and I want to give higher percentages of 20 son as increases the number of emails they open.

  For example, if a cable is sent five e-mails in Q1:

  • give 100% of available partition if they opened everything at least 3 times

  

  Question: if I touch the rules by the foregoing, will be the price of the model 100% of the score available if lead opens at least three emails sent at least once? Alternatively, the model will only offer 100% partition if lead open one of the e-mail sent at least three times?

  I understand how the function if I chose "specific E-mail"instead of "any E-mail"; then points would be awarded only if the actual email is opened a number of times.

  But is it possible to open that by selecting "any E-mail" and higher drive for conduit scores open more emails sent during a period of time, regardless of the number of times any one specific e-mail is open?

  I'm sure it will give him 100% if it opens any email three times. This could be the same email three times or 3 different mails once.

• Is it possible to control what the blog module renders in an email campaign?

  Say, for example, I want to just have the tittle meta and meta description of some positions. No images. Is this possible?

  Thanks in advance,

  Diego.

  Hi Diego

  Unfortunately it is not possible at this stage.

  Here is an article that describes what can view the module blog/blogposts!

  {module_blog} | Developers of business catalyst

  THX

  Silviu