DASYLab is not communicating with the hardware dbk25a3
Hello:
I'm trying to troubleshoot a high pressure processing equipment. This system uses a PID controller. The level of pressure does not stop at the set point, but continue to increase. I am trying to solve this problem. As the program was written by someone else and there is no documentation on what each represent module and done. It is very difficult for me to solve the problems. Therefore, I decided to start all over again with my own module. However, I have a problem. My hardware (DBK25 and others) is not communicating with the module of Dasylab. I tried several different things, that nothing seemed to work. I get this error.
DBK25A3O
An entry of a module is open.
Any help is highly appreciated
Thank you
Krishna
The error message indicates that you have a module that has one input open - nothing is connected. You must have a data wire to all entries.
Tags: NI Products
Similar Questions
-
Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.
Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer. Maintains documents in the print queue and print them when the computer is restarted. In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.
Hello
Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.
Please answer the following questions that would help us provide a better solution.
What version of Windows are you using?
Try to follow the steps and check:
Step 1:
Visit the link following if you are using Windows 7.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
If you are using Windows Vista, see the steps mentioned in the link.
http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems
Try the steps from the link following if you are using Windows XP.
Resources for the resolution of the printer in Windows XP problems
http://support.Microsoft.com/kb/308028
Step 2:
Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.
You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Put the normal computer as mentioned in step 7 of section.
Step 3:
About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Please feel free to respond if you have any other questions, we would be happy to help.
-
MY hp c4500 wireless printer will not print. Troubleshooting says my printer is not communicating with the wireless router. I've checked everything. Unable to find the answer.
Hello
As OEM HP is responsible for the good operation of the printer and their drivers. Check with
HP support, their documentation online and drivers and ask in their forums.Good luck, you need to update or reinstall the latest driver.
Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Printer is not communicating with the computer
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: I have problems with my Dell v305 printer I tried everything. Error message indicates that the printer is not communicating with the computer
Hi vanessa James Sluys Veer,.
Probably you should install/update your printer drivers for your operating system.
Please see the link below for the Dell Web site:
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Lexmark Interpret S405 is not communicating with the computer and will not print
My computer works with Windows 7 and updates automatically. I got the Lexmark Interpret S405 for 18 months, and it has worked great until a couple of months. When I try to print, I get an error message indicating that the printer is not communicating with the computer. When I check the printer, it shows he's ready. The print job shows that it is ready to print, but nothing happens except for this message. When I try to erase the impression, it really takes a lot of time - usually have to unplug the printer so that it can finally clear. Then it still will not print if I try again unless I restart the computer. Lexmark support page says that there is a problem with Windows 7 and their product. All the solutions for this problem yet?
Computer model of the bridge ZX6970, OS 64-bit, intel CORE CPU I-13 3.30 GHz, Windows 7 Home Premium. Can someone advise a fix for this problem? Thank you!
Hello
Have you tried to download and install the updated firmware for the Lexmark Interpret S405 from the manufacturer's website.
If this isn't the case, please download and install it.
Download Firmware for your printer!
We know the results.
-
EpsonSX525wWD is not communicating with the computer
I have wifi printer Epson SX525WD. computer on broadband. printed many times with no problems, all of a sudden stop commnuicating with computer, every thing is
connected and on, my printer just ready readings will be to printHello- What happens when you try to print over wireless network?
- Is your shared printer on your wireless home network?
- What is the version of Windows running on your computer?
From now on, I suggest you try the steps mentioned below.
Method 1: Problems printing and printing errors
Automatically diagnose and repair when you cannot print or for problems setting up a printer, connecting to a network printer and related errors.
http://support.Microsoft.com/mats/printing_problems/
Method 2: Troubleshoot network printer
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
Note: Even if the measures are for Windows Vista, you can always go ahead and try the steps.
-
HP 8500 a scaner is not communicating with the computer
He is used to, but now it will not scan HP for computer
Hi JamesO'Riley,.
· What version of the operating system is installed on the computer?
· What happens when you try to scan?
· You get the error message?
· Have you made changes in software/hardware, or any Windows update on the computer?
Uninstall and reinstall the software and the related drivers for the scanner and check if it helps to solve the problem.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Common issues with HP Diagnostic tools
-
The computer must be connected because it prints my orders?
Hello
What operating system is installed on your computer?
I suggest you to follow the steps from the link and check if it helps:
You can also post your query on HP forum to get help:
-
I am running windows xp family. I don't know what happened, but all of a sudden, I get this message when I try and print to my lexmark x 1270 "communication not available with the printer. I tried every troubleshooter, I contacted Lexmark support that they gave up, saying: it must be a file is missing from the windows registry, you can help me?
It seems that if you say that the pilots were not reinstalled successfully. What was the mystery file that could not be found?
Do you remember how the software has been uninstalled? Was something else than the control panel > Add / Remove Programs (or the link "Uninstall" from start > all programs) used?
If you do not really clean things, attempts to reinstall the printer drivers may actually just end up putting the old drivers back in place.
This is the easiest way to uninstall and reinstall the printer drivers: Article 1. The critical step is #4.
This page has more detailed advice for cleaning things out before you reinstall: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
I asked the firewall and antivirus applications because sometimes, some security software may interfere with the printers. This shouldn't be a problem with the firewall of Windows XP and Microsoft Security Essentials.
Finally, your problem could end up being hardware related. Lexmark support has no hardware troubleshooting operation? The manual for your x 1270 says:
All-in-One is not communicating with the computer
1. disconnect and reconnect both ends of the USB cable. For more help, see the
installation documentation.
2 unplug the power cord from the wall outlet, plug it in again, and
Press Power. For more information, refer to the installation documentation.
3 restart the computer. If the problem continues, remove and then reinstall
the software. For more information, see page 16. [which ask you to remove the software using the link "Uninstall" - which is not complete, as described above]If you have another type of printer USB cable, you should try it exchanges. Ideally, you need to connect to the printer on another computer, but maybe it's not convenient for you.
-
My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.
How can I do this?
MichaelMcQuillar,
Please check your virus protection and firewall. They seem to block communications from the printer.
Rick
-
I use Firefox for several years on my G5 iMAC, running MAC OS 10.5.8. This morning, Firefox does not open. Tried to open it from the icon in the Applications folder, but does not always. Safari opens without difficulty. Tried to download Firefox again, thinking a file might have been corrupted, but new version is not compatible with my hardware of desktop computers. I find a compatible version of Firefox? My NAV for MAC security software is not interfering.
- Versions of Firefox 4 and later do not run a Mac PowerPC.
- Firefox 4 and later requires at least OS X 10.5 and an Intel Mac.
- http://www.Mozilla.com/Firefox/5.0/system-requirements/
For a non-official Firefox 4 compatible version (TenFourFox) which works on Mac PowerPC with OS X 10.4.11 or OS X 10.5.8, you can consult:
Firefox 3.6.x (Mac OS X 10.4 and later versions) can be found here:
-
SD-R2312 device does not appear in the hardware Manager
I have several problems with my Toshiba SD-R2312 Windows XP. Cannot open CD, device does not appear in the hardware Manager, drive is not displayed anywhere.
First time it happened, I was able to reactivate it as described here.
http://www.TechSpot.com/VB/all/Windows/t-28912-desperation-Toshiba-DVDROM-malfunction-possible-missing-driver.htmlAfter working for a few weeks, the drive is 'gone' once again, same symptoms as the first time.
Try the registry fix again, I found that there are still "UpperFilters" (which I've deleted again), but not Lowerfilters.
However, which did not help this time.I have no "unknown" devices that I could delete (see http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6548&messageID=22638).
Does anyone have an idea how to get the drive working again? Is there a way to prevent that from happening again?
Thanks in advance.
Hello
If the drive is not displayed in Windows Explorer, perhaps this method can help. Try it!
-
Satellite P100-160, not compatible with the latest games graphics card
My laptop is the Satellite P100-160, which has a 945GM Express chipset is not able to play the latest games. I understand that the graphic card cannot be replaced. So, which eliminates this option...
Recently, another solution I've heard of is an external graphics such as the Asus XG station...
http://www.Trustedreviews.com/graphics/News/2007/01/15/ASUS-makes-first-external-laptop-graphics-card/P1
either this...
http://www.coolest-gadgets.com/20070611/MSI-luxium-offers-external-graphics-solution-for-notebooks/However these devices large need an express card slot, which I'm not sure that this laptop has even?
If it's not there ways to add to my laptop? And if not, what other options are available to me that may help my laptop to face the latest games?
Thank you
Richard
Hello
The Intel graphics card is simply not powerful enough to handle the latest PC games.
You think so, why all the hardcore gamer don t buy computers laptops, but during the CPU clock and buy new graphics for PC s Office cards?The laptop is not comparable with the desktop PC. It's just different technology according to the limitations of hardware upgrade on your laptop, you can spend only the HARD drive and RAM.
You cannot add also all other ports for laptop. It is not possible :( -
bad display wddm is not compatible with the vga adapter
transparcency is horrible, wddm is not compatible with the vga adapter
Hello
1. who is the operating system installed on the system?
2. do you get an error message?
Method 1:
Follow the link and check if the VGA card is compatible. Check if it helps.
Windows 7 Compatibility Center
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/Method 2:
Follow the link below and install the drivers in compatibility mode. Check if it helps.
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
For more reference: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/problem-with-windows-display-driver-model/a98ccf9a-da4a-465d-bc69-4d0e88470057
Let us know if it helps.
-
I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.
Actually, no, the answer in the links were also less than helpful... suggested this, that. Things that I had already done b4 posting my question.
More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again. Coincidence? No doubt, but still...
Maybe you are looking for
-
I've never done a Time Machine backup and I have upgraded to iOS Sierra. Help!
I'm a fool. After owning my Macbook for 5 years, I failed to make a single Time Machine backup. I just saved my essential to an external hard drive. I have upgraded to iOS Sierra. Big mistake. I want to go back to iOS Capitan, but it does not seem po
-
FileVault store keys in iCloud
Try to encrypt a MacBook Air. With more than 3 GB of available disk space in iCloud, when I choose iCloud is the place where to store the key for FileVault, I get the following message: An error occurred attempting to maintain the key to recovery in
-
Why is my iBook store showing only free books?
Hello Recently, the books shown on my iBookStore are only those free. I'm used to be able to browse through the available books. What happened to the iBookStore?
-
OfficeJet 6600: flashing of the indicator wireless.
Why suddenly the button (the small blue button at the bottom of the printer interface) wireless starts to Flash? I'm usinga USBconnection.
-
13 important updates failing repeatedly
KB953297, KB972581, KB973593, KB973709, KB969604, KB957789, KB969559, KB969613, KB973704, KB974234, KB976416, KB974561, the 2007 Microsoft Office Suite Service Pack 2 (SP2) keep not again and again, what I can do to find out what is causing my update