.dat or .msi in the ThinReg login script?

Similar Questions

• 802. 1 x with the login script

  Hello

  Before you set the 802. 1 x with ISE. Logon user with a script to map the network drive.

  We deployed the 802. 1 x with ip phone and your PC successfully, but the logon script does not work now.

  Whatever measures are necessary to make the login script work?

  ISE:2.1

  switch: 3750 with 12.2 (55) SE10

  PC:Win7 (to connect to the ip phone)

  IP phone: 6921 (connect to switch f 1/0/4)

  Switch configuration is to see more:

  !
  version 12.2
  no service button
  tcp KeepAlive-component snap-in service
  a tcp-KeepAlive-quick service
  horodateurs service debug datetime localtime show-timezone msec
  Log service timestamps datetime localtime show-timezone msec
  no password encryption service
  Service linenumber
  sequence numbers service
  !
  hostname ISESW01
  !
  boot-start-marker
  boot-end-marker
  !
  enable password 7 xxxxxxxxxxxxxxxxxxxxxx
  !
  username password 7 xxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx
  !
  !
  AAA new-model
  !
  !
  RADIUS AAA server group ISE
  auth-port 1645 10.202.152.91 Server acct-port 1646
  auth-port 1645 10.202.152.92 Server acct-port 1646
  !
  default AAA dot1x ISE authentication group
  AAA authorization network default group ISE
  AAA authorization auth-proxy default group ISE
  accounting AAA periodic update 5
  accounting dot1x default start-stop group AAA ISE
  AAA accounting system by default start-stop group ISE
  !
  !
  AAA server RADIUS Dynamics-author
  customer 10.202.152.91
  customer 10.202.152.92
  !
  AAA - the id of the joint session
  switch 1 supply ws-c3750v2-48ps
  mtu 1500 routing system
  VTP transparent mode
  DHCP excluded-address IP 10.202.21.1 10.202.21.10
  DHCP excluded-address IP 10.202.121.196
  !
  IP dhcp pool testingdhcp
  Network 10.202.19.0 255.255.255.0
  router by default - 10.202.19.1
  10.202.152.21 DNS server
  !
  !
  analysis of IP device
  !
  MLS qos map policed dscp 0 10 18 24 46-8
  MLS qos map cos-dscp 0 8 16 24 32 46 48 56
  MLS qos srr-queue input bandwidth 70 30
  MLS 1 80 90 qos srr-queue input threshold
  priority-queue input bandwidth 2 30 MLS qos srr-queue
  queue threshold 1 MLS qos srr-queue input cos-map 2 3
  queue threshold 1 MLS qos srr-queue input cos-map 3 6 7
  queue threshold 2 MLS qos srr-queue input cos-map 1 4
  queue threshold 1 MLS qos srr-queue input dscp-map 2 24
  queue threshold 1 MLS qos srr-queue input dscp-map 3 48 49 50 51 52 53 54 55
  queue threshold 1 MLS qos srr-queue input dscp-map 3 56 57 58 59 60 61 62 63
  queue threshold 2 MLS qos srr-queue input dscp-map 3 32 33 40 41 42 43 44 45
  -More - mls qos srr-queue input dscp-map 2 3 46 47 threshold queue
  queue threshold cos 1-map of MLS qos srr-queue output 3 4 5
  queue threshold cos 2-map of MLS qos srr-queue output 1 2
  queue threshold 2 cos-MLS qos srr-queue output 2 3 card
  queue threshold cos 2-map of MLS qos srr-queue output 3 6 7
  queue threshold cos 3-map of MLS qos srr-queue output 3 0
  queue threshold 4 cos-MLS qos srr-queue output 3 1 card
  queue threshold 1 dscp-map of MLS qos srr-queue output 3 32 33 40 41 42 43 44 45
  queue threshold 1 dscp-map of MLS qos srr-queue output 3 46 47
  queue threshold 2 dscp-map of MLS qos srr-queue output 1 16 17 18 19 20 21 22 23
  queue threshold 2 dscp-map of MLS qos srr-queue output 1 26 27 28 29 30 31 34 35
  queue threshold 2 dscp-map of MLS qos srr-queue output 1 36 37 38 39
  queue threshold 2 dscp-map of MLS qos srr-queue output 2 24
  queue threshold 2 dscp-map of MLS qos srr-queue output 3 48 49 50 51 52 53 54 55
  queue threshold 2 dscp-map of MLS qos srr-queue output 3 56 57 58 59 60 61 62 63
  queue threshold 3 dscp-map of MLS qos srr-queue output 3 0 1 2 3 4 5 6 7
  queue threshold 4 dscp-map of MLS qos srr-queue output 1 8 9 11 13 15
  queue threshold 4 dscp-map of MLS qos srr-queue output 2 10 12 14
  MLS qos all the output queue 1 1 100 100 50 200 threshold
  MLS qos queue of output 1 all threshold 2 125 125 100 400
  MLS qos queue of output 1 all threshold 3 100 100 100 400
  MLS qos queue of output 1 all 4 60 150 50 200 threshold
  MLS qos all the output queue 1 15 25 40 20 buffers
  MLS qos
  !
  Crypto pki trustpoint TP-self-signed-1210376576
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1210376576
  revocation checking no
  rsakeypair TP-self-signed-1210376576
  !
  !
  TP-self-signed-1210376576 crypto pki certificate chain
  certificate self-signed 01
  xxxxxxxxx
  quit smoking
  Auto qos srnd4
  control-dot1x system-auth
  dot1x critical eapol
  !
  !
  !
  !
  pvst spanning-tree mode
  spanning tree extend id-system
  VLAN spanning tree priority 819 61440
  !
  internal allocation policy of VLAN ascendant
  !
  VLAN 121
  name Voice_Vlan
  !
  VLAN 819
  name 19F_VLAN
  !
  VLAN 888 899
  !
  !
  class-map correspondence AUTOQOS_VOIP_DATA_CLASS
  match ip dscp ef
  class-map correspondence AUTOQOS_DEFAULT_CLASS
  match the name of access by DEFAULT ACL-AUTOQOS group
  class-map correspondence AUTOQOS_VOIP_SIGNAL_CLASS
  match ip dscp cs3
  class-map correspondence AutoQoS-VoIP-RTP-Trust
  match ip dscp ef
  class-map correspondence AutoQoS-VoIP-control-Trust
  match ip dscp cs3 af31
  !
  !
  Policy-map AUTOQOS-SRND4-CISCOPHONE-POLICY
  class AUTOQOS_VOIP_DATA_CLASS
  DSCP ef Set
  128000 8000 exceed-action of the police controlled-dscp-transmit
  class AUTOQOS_VOIP_SIGNAL_CLASS
  DSCP Set cs3
  32000 8000 exceed-action of the police controlled-dscp-transmit
  class AUTOQOS_DEFAULT_CLASS
  Set default dscp
  10000000 8000 exceed-action of the police controlled-dscp-transmit
  Policy-map AutoQoS-Police-CiscoPhone
  class AutoQoS-VoIP-RTP-Trust
  DSCP ef Set
  320000 8000 exceed-action of the police controlled-dscp-transmit
  class AutoQoS-VoIP-control-Trust
  DSCP Set cs3
  32000 8000 exceed-action of the police controlled-dscp-transmit
  !
  !
  !
  !

  interface FastEthernet1/0/4
  switchport access vlan 819
  switchport mode access
  switchport voice vlan 121
  authentication event fail following action method
  action of death event authentication server allow voice
  no response from the authentication event action allow vlan 889
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  authentication order dot1x mab
  authentication priority dot1x
  Auto control of the port of authentication
  MAB
  added mac-SNMP trap notification change
  deleted mac-SNMP trap notification change
  dot1x EAP authenticator
  dot1x tx-time 10
  spanning tree portfast
  !

  !
  interface Vlan1
  no ip address
  !
  interface Vlan819
  IP 10.202.19.11 255.255.255.0
  !
  default IP gateway - 10.202.19.1
  IP classless
  IP http server
  IP http secure server
  !
  !
  IP access-list extended by DEFAULT ACL-AUTOQOS
  allow an ip
  IP access-list extended redirection
  deny udp any eq bootpc any eq bootps
  deny udp any any eq bootps
  deny udp any any eq field
  deny ip any host 10.202.154.192
  allow an ip
  !
  !
  SNMP - server RO Cisco123 community
  RADIUS attribute 6 sur-pour-login-auth server
  Server RADIUS attribute 8 include-in-access-req
  RADIUS attribute 25-application access server include
  dead-criteria 30 tent 3 times RADIUS server
  RADIUS-server host 10.202.152.91 auth-port 1645 acct-port 1646 borders 7 xxxxxxxxxxxxxxxxxxxxxxxx
  RADIUS-server host 10.202.152.92 auth-port 1645 acct-port 1646 borders 7 xxxxxxxxxxxxxxxxxxxxxxx
  RADIUS vsa server send accounting
  RADIUS vsa server send authentication

  I had a similar problem the workstations where the value "of the computer or user authentication" in the PEAP protocol settings. What is happening is that list DACL that served as of when the computer account has been authenticated restricted just DCs etc, but don't understand the locations required for the login script. It seems that Windows 7 user logon script runs before the dot1x presents the user credentials to the switch.

  Thus, in our case, we have modified the DACL is in place for the computer account to allow access to the locations required for the login script (i.e. the network sharing servers), and everything works.

• Send form data to the database with scripted button

  I know not how to connect the form to an Access database. However, I do not want the form to connect to the database until the user clicks a button. When the user completes the form and clicks the button, I need the form to connect to the database and save form data in a new record. How script button to do this?

  Any help is appreciated.

  I think that you will need to use a layer between the two.  For example, LC, you can do a process that takes your data and stores it in your database.  Your form may submit to this process through SOAP and REST.

• Issue date and time with the javascript scripts

  Hi all

  I need to maintain a bit of history on my pdf form, so I need to get the date and time when the user submits the form.  Currently, I am able to do this in FormCalc.

  var todayDate = Date()
  var todayTime = Time()
  var today = concat (Num2Date (todayDate, "MMMM DD, YYYY"), "", Num2Time (todayTime, "h: mm A") "");

  today will contain: April 28, 2009 14:23

  I want exactly the features in javascript.  I'm not able to get the same result.

  Please give me some code for the same in javascript snippet

  Deepak.

  Hi Deepak,

  This example should show you how you can recover each "piece" of the date in JavaScript and piece and then that their back together according to your needs.

  You will find several examples of scripts on the date formatting here: http://javascript.internet.com/time-date/

• Customize the login scripts

  I have a PHP/MySQL login custom script that sends users to an error page if things go wrong with the server.
  
  Ideally, I would like to change the configuration of Dreamweaver CS3 files, so it's the connection by default whenever I set up a site connection. I can't locate the file/s that create/s login script code and so everyone can someone point me in the right direction would be great!
  
  Thank you
  
  Julie
  

  juli_s wrote:
  > I'm having
  > trouble to locate the file/s what s/create connection script code and if
  > anyone no matter who can point me in the right direction would be great!

  On Windows, this is C:\Program Files\Adobe\Adobe Dreamweaver
  CS3\configuration\Connections\PHP_MySQL\connection_includefile. EDML

  --
  Adobe Community Expert David Powers
  Author, "The Essential Guide to Dreamweaver CS3" (friends of ED)
  Author, "PHP Solutions" (friends of ED)
  http://foundationphp.com/

• Mac Labs: ARD login script not working only off 10.11

  I run the laboratory of computer science at the State University.  5 laboratories w / 100 + machines.  We have been a Mac shop all since switching to Intel chips.

  I use the following login for the years script:

  name = "user";

  password = "pword";

  osascript<>

  Tell application "system events".

  hit tab

  strike (character ASCII 8)

  hit tab

  strike (character ASCII 8)

  strike back

  delay 0.5

  hit tab

  combination of keys '$name '.

  hit tab

  delay 0.5

  combination of keys '$password '.

  delay 0.5

  strike back

  strike back

  tell the end

  EXPRESSIONS OF FOLKLORE

  When I send to a machine (with and without SIP) 10.11, I get the following message is displayed in the status field of the task:

  osascript [261:2199] CFPasteboardRef CFPasteboardCreate (CFAllocatorRef, CFStringRef): failed to create aggregate data

  I don't know if the problem lies with ARD admin being 3.8 and 10.11 being 3.8.5 client.  I had similar problems with disparity admin/customer a while back who disappeared when ARD admin has been updated.

  Not being able to connect on my machines 100 + is a deal breaker.  I can't deploy 10.11 nor I can recommend that we buy new machines this year (we replace generally 1/3 each year).

  Someone at - it a script that works in 10.11?

  Hi, solves this problem already? I would be interested in the solution because I have the same problem with my El Cap clients...

  Thanks in advance for your help.

• Login script JSON jqm to need help bbui

  Hello

  A few months ago, I tried to start with bbui get more native objects (like swipe in the menu drop-down).

  The problem is that bbui sucks compared to jqm (kitchensink) my complete app depends on, and the part I am now is connection and registration of a new user of the application.

  This is example code that I use a lot:

  Example of form

  [code]

  [/ code]

  Example of jQuery:

  [code]

  $(function() {})
  $("#JqAjaxForm").submit (function (e) {}

  var b is return ["JqAjaxForm"] ["email"] .value;.
  var c is return ["JqAjaxForm"] ["password"] .value;.

  dataString = $("#JqAjaxForm").serialize ();

  $.ajax({)
  type: 'POST',
  URL: ""http://myserver.com/login.php ", "
  data : dataString,.
  data type: 'json ',.
  success: function (data)
  {

  If (data.usrkey == "undefined") {alert ("user/password incorrect");
  } Else if (data.usrkey == "null") {alert ("user/password incorrect");
  } Else if (data.usrkey == '0') {alert ("user/password incorrect");
  } Else if (data.banned == '1') {alert ("user/password incorrect");
  }
  on the other
  {

  USRID = data.usrid;

  usrid var = data.usrid;

  localStorage.setItem ('userd', usrid);

  Window.Location.assign ("Start.html");

  }

  }

  });

  });
  });

  [/ code]

  what the code, if the json in login.php data is 0 or undefined, it means that your user/pass is incorrect.

  When usr.banned is 1, it means you did something wrong and you're banned from the app

  Otherwise, it will return your username and which will always be greater than 0 then you will get a localstorage (aka connected).

  This code does exactly what is should do... in jquery.

  I tried to mix different versions of jquery and jquery mobile with bbui but it has messed up every little thing.

  And this json/ajax request made in this case only connect, but I use it a lot more.

  As example for user information, submit information, check if you have access to the parties (0/1).

  In any case to long a little more short, jquery does not set well with bbui.

  I am locked out of my application and cannot save a new user because it uses jquery to submit.

  Someone at - it a good example of the above code that does exactly the same thing?

  but works in bbui, OR a jquery lib (mobile) I can use with bbui

  Small update on my side, when I use the zepto (http://zeptojs.com/) plugin, I get the below error:

  ReferenceError: Can't find variable: webworks

  This error I get also when I include any javascript jquery or jqm file

  I forgot to mention, indeed, that I already have those around him.

  my login script works now, jquery 1.9 x was the problem, no problems with 1.8.x

• What about the OAM login page

  Hello world
  
  Im getting 404 error when accessing the url http:// < host_name > im content: 14100/oamconsole.
  
  If I have access to http:// < host_name >: 14100/oam im getting the login of the OAM page but I'm system error. Please try your action again. If you continue to receive this error, contact administrator. in the browser.
  
  In the log file I'm getting the following error...
  
  < 9 April 2012 14:26:25 IST > < error > < HTTP > < BEA-101017 > < [ServletContext@458296091[app:oam_server module: oam path: / oam spec-version: 2.5], request: [weblogic.servlet.internal.ServletRequestImpl@1baf0b54
  GET /oam/index.jsp HTTP/1.1
  Accept: * / *.
  Accept-Language: en - us
  User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; MS - RTC LM 8; InfoPath.3)
  Accept-Encoding: gzip, deflate
  Connection: Keep-Alive
  
  Root cause]] of ServletException.
  weblogic.servlet.jsp.CompilationException: could not compile JSP index.jsp
  index.jsp:2:4: no tag library could be found with this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
  < uri prefix = "http://beehive.apache.org/netui/tags-html-1.0" %@taglib = "netui" % >
  ^----^
  index.jsp:2:4: no tag library could be found with this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
  < uri prefix = "http://beehive.apache.org/netui/tags-html-1.0" %@taglib = "netui" % >
  ^----^
  index.jsp:3:4: no tag library could be found with this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
  < uri prefix = "http://beehive.apache.org/netui/tags-databinding-1.0" %@taglib = 'netui - data' % >
  ^----^
  index.jsp:3:4: no tag library could be found with this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
  < uri prefix = "http://beehive.apache.org/netui/tags-databinding-1.0" %@taglib = 'netui - data' % >
  ^----^
  index.jsp:4:4: no tag library could be found with this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
  < %@taglib uri prefix = "http://beehive.apache.org/netui/tags-template-1.0" = "netui-template" % >
  ^----^
  index.jsp:4:4: no tag library could be found with this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
  < %@taglib uri prefix = "http://beehive.apache.org/netui/tags-template-1.0" = "netui-template" % >
  ^----^
  
  at weblogic.servlet.jsp.JavelinxJSPStub.reportCompilationErrorIfNeccessary(JavelinxJSPStub.java:226)
  at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:162)
  at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:256)
  at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:216)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:243)
  Truncated. check the log file full stacktrace
  >
  
  
  
  I also tried http:// < host_name >: 7001/oamconsole but in browser im get internet cannot display the page *. [Admin even break and oamserver is in operating mode] * what url I have to use to get the OAM login page?
  
  If I gave correct url I have to solve?
  
  Please advice me?
  
  
  Kind regards
  Knani

  Hello
  Here are the troubleshooting steps:
  1. check if there was a refreshment which took place.
  2 go and manually check if all policies configuration were relocated properly.
  3. After all, the update of the measures conducted were restarted servers if not go and restart the server.

  Kind regards
  Olivier B.

• is it possible to display the Date and time in the address bar or a clock window constantly

  I need to take screenshots with date stamps and time using the script of iMacros. Everything by taking screenshots iMacro don't add taskbar windows for the date and time. It takes screenshots of browser. Is it possible to display the Date and time in the address bar or a clock within the tab browser constantly to capture the screenshot with time stamp through iMacros
  I added the big clock background Add-ons, but it is visible to new tabs.

  Badly looking for help and it will be really appreciated...

  Try this extension:

  • https://addons.Mozilla.org/firefox/addon/simple-clocks/
  • https://addons.Mozilla.org/en-us/Firefox/addon/FoxClocks/

• SRA 4600 Web Application Firewall blocks access to the Portal login page.

  We have a 8.0.0.1 - 16 4600 running and run the Web Application Firewall.  We had a few reports of users home that our portal page was not available, only tried IE, but everything went well here.  Today we had an internal machine with the same question and noticed that it was blocking WAF access: "threat of avoided WAF: Injection SQL 1 attack" you can see nothing wrong with this machine that may be cause the WAF to block the Portal login page.  Here are the event log:

  "Jun 10 09:34 sslvpn1 SSLVPN: id = sslvpn sn = C0EAE4745184 time =" 2015-06-10 09:34 ' vp_time = '2015-06-10 14:34 UTC' pri fw = xx.xx.xx.xx = 2 m = 34 c = 402 src = dst = xx.xx.xx.xx xx.xx.xx.xx user = 'Unknown' usr = 'Unknown' msg = "prevented WAF threat: SQL Injection attack 1 ' URI=remote.ncmic.com:443/ rule-match =" _ga = ga1.2.1366358136.1433946841; " _dc_gtm_ua-21325736-1 = 1 "AttackCat = 'SQL Injection attack 1' somm ="SQL Injection is a technique of attack used to exploit websites that construct SQL statements from user-supplied input,"hamid = category '9005' = 'command execution - SQL Injection' agent =" Mozilla/4.0 (compatible; " MSIE 7.0; Windows NT 6.1; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; Tablet PC 2.0)' geoCountryID = '0' geoCountryName = 'LAN' geoRegionName = 'unknown' geoCityName = 'unknown '.

  Other machines can access the page without problem... thoughts?

  Can not reproduce this problem at the moment...

• Hide the page looping script

  Hello

  I use jdeveloper 11.1.1.7.0.

  I have an ADF Application with ADF, security (auth-method FORM).

  In my login page (Login.jspx) users are fully authenticated and redirected to another secure page. Everything works beautifully.

  But on Login.jspx users, right-click on the page and select the option "View source" that says:

  -Chrome on 45.0.2454.101: page of script for looping

  -Mozilla FireFox 37.0.1: page of script for looping

  -Internet Explorer 9.0.8112.16421: 'Real' of the page source code

  What I want to know is how to prevent users from viewing the page looping script.

  I don't like to show the source code 'real' of the page (like IE for this).

  I do not want to hide the actual code of the page, but I need to hide the script loopback page because I think that it contains information about my request that users know not.

  Is it possible to take measures to avoid the page of script loopback?

  Attached files:

  Login.html: my looping script page

  Login.zip: Login.jspx + web.xml

  
  

  Concerning

  Roberto
  

  Refer

  Oracle ADF - leaving Competition In The Dust: ADF avoiding loopback script in servlets

• Field containing average function works only when the data are engaged on the same page. Does not work for fields on other pages.

  I'm having a problem with a field defined to calculate the average of eleven points fields (points 1 to 8 on page 1-9-11 on page 2). My original question was that it could exclude fields of points when they do not have information entered and adjust the average calculation (number of "divided by") accordingly.

  I had someone write JavaScript code for him, but I just found a small problem I don't know if it's something in the code or what the person who originally wrote the script cannot understand it either and suggested that I have post here.

  The middle area (located on the 2nd page of the pdf page two) seems to work exclusively with precision if at least one of the points of the fields on the 2nd page, 9, 10 (and 11) are engaged with the data. No values entered on the first page and only the first page, are for some reason any dividing by a more than expected. For example, if I fill the boxes 1, 2 and 3, it divides the total by four. If I filled just box 7, it halves. If I fill all 8 boxes on the 1st page, it divides by nine. It is corrected as soon as I get the points in one or more of the three boxes on the 2nd page points, suddenly the overall average is accurate. But if boxes 9, 10 and 11 contain no points, then the average is still inaccurate because the number of ' divide by "he uses is one more than what it should. I can't understand how to attach the form to this post, so I downloaded on Dropbox: Dropbox - used Evaluation.pdf.

  Under the direction of State: javascript came work to exclude the empty boxes when the points are entered in one of the three points of fields on the 2nd page (and more), but the average function is not accurate because it adds 1 to the number of ' divide by "in the calculation of the average If the points are only entered into the fields on the 1st page.

  Here's the code I entered in the 'Custom calculation Script' box in the 'Calculate' tab of the Properties menu of Test field:

  Initialize variables

  var num = 0;

  var sum = 0;

  Browse the input fields

  for (var i = 1; i < 12; i ++) {}

  var f = getField ("points." + i);

  If {(f.valueAsString)

  increment the counter to non-empty field

  NUM ++;

  Add the value of the running total field

  sum += + f.value;

  }

  }

  Calculate the average

  If {(num)

  Event.Value = sum / num;

  } else {}

  All fields are empty, then the empty value

  Event.Value = "";

  }

  I do not see that. Add the code of script debugging will display the results that each field is completed:

  Initialize variables
  var num = 0;
  var sum = 0;

  Browse the input fields
  for (var i = 1; i)< 12;="" i++)="">
  var f = getField ("points." + i);
  If {(f.valueAsString)
  increment the counter to non-empty field
  NUM ++;
  Add the value of the running total field
  sum += + f.value;
  }
  }
  Debug - display results as the form is filled;
  Console.Show
  Console.println (sum + "/" + num + "=" + sum/num);
  end of debugging;
  Calculate the average
  If {(num)
  Event.Value = sum / num;
  } else {}
  All fields are empty, then the empty value
  Event.Value = "";
  }

• Need help to do the job of script Get-FolderPath

  Hello world

  I have do this script work can someone help me on this. I was able to produce the csv file unfortunately there is no value/output on the path column. I think that I was not able to call the function get-folderpath correctly. Thank you.

  ------

  $date = get-Date-format-M - d - yyyy

  . 'c:\Users\Get-FolderPath.ps1 '.

  $folders = get-file-type vm | Get-FolderPath | Sort-Object Id

  {Set-Path function

  Param ($Object)

  foreach ($folder IN $folders) {}

  If ($folder. ID - eq $Object.Id) {}

  $result = $folder. Path

  breaking

  }

  }

  $result

  }

  Get - VM | Sort-Object FolderID | Select name, Uid, NumCpu, MemoryGB, ProvisionedSpaceGB, @{N = "Path"; E = {Set-path - object $_.} Folder}}, ResourcePoolId, ResourcePool, @{N = "ToolsStatus"; E={$_. ExtensionData.Summary.Guest.ToolsVersionStatus}} | `

  Export-Csv "C:\test\vm-vServer-$date.csv" - NoTypeInformation - UseCulture

  -----------

  Also when I try to run it directly on powercli I get this error

  --------

  scripts\Get - FolderPath.ps1:45 tank: 25

  + $fld = get-view $fld. Parent

  +                         ~~~~~~~~~~~

  + CategoryInfo: InvalidData: (:)) [Get-view], ParameterBindingVal)

  idationException

  + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom

  ation.ViCore.Cmdlets.Commands.DotNetInterop.GetVIView

  Get-view: could not validate the argument on the parameter "VIObject". The argument is

  NULL, empty or an element of the collection argument contains a null value.

  Provide a collection that does not contain any null values and then try him

  command again.

  ------

  I would like to get output something like that. The most important thing is for me to get the path of the folder location.

  The virtual computer name. Data Center | Cluster | NumCPU | MemoryGB | Implemented SpaceGB. Path of the folder.

  Thanks in advance.

  See you soon,.

  The following PowerCLI script will give you the information you want:

  Get - VM | Select-Object - property Name,@{N='Datacenter'; E={$_| Get-Datacenter}},@{N='Cluster'; E={$_. VMHost.Parent}},

  NumCPU,MemoryGB,ProvisionedSpaceGB,@{N='Path'; E={($_. Folder | Get - FolderPath). Path}}

• Mirage Pivot fails when you are using software that replaces the Windows Login (GINA) as Imprivata

  When you try to perform a migration recently at a client site the pivot process has not completed as planned because of Imprivata. Imprivata is a SINGLE sign that seems to replace the Windows GINA and provides a custom login screen.

  During an attempt of the Pivot process (Mirage 4.3) the start of Windows Update screen does not appear and the standard Windows login is displayed. When you manually login customer Mirage shows the USMT process is underway. This allows users to log in and is generally not the process but it does not complete the USMT process and join the domain.

  This is due to the customer Imprivata, although we suspect that would happen with any product which replaces GINA of Windows.

  Workaround solution:

  We are uninstalling the client of the base image Imprivata and try to apply this to be an application layer or display the migration script.

  Has anyone else had this problem with a SINGLE sign or a custom GINA solution?

  Peter

  We have removed Imprivata and the process worked ok. We are now reinstall using the post migration script that works

• Date field to fill the day

  Hello

  I use Adobe LiveCycle Designer ES4 and I would use the existing date field and when the user chooses the date an additional field would complete the day of the week. Is it possible without too much script used.

  Hello

  It is not very complicated.

  Here's a sample for you: Dateien freigegeben - Acrobat.com

  You just need 7 fields named 'Day' and a small script in the output of your date field event.

  if (not $.isNull) then
    var datePattern = "DD.MM.YYYY"
    var date = Date2Num($.formattedValue, datePattern)
    for i = 0 upto 6 do
    Day[i] = Upper(Num2Date(Sum(date, i), "EEEE"))
    endfor
  else
    for i = 0 upto 6 do
    Day[i] = ""
    endfor
  endif