Data acquisition of SPCM-AQRH-15 and Nano - ViewTM 200-2/M
I am trying to acquire data of APDs (PerkinElmer, SPCM-AQRH-15) and NANOPOSITIONNEUR (Mad City, Nano - ViewTM 200-2/M). The second device has USB 162 or 202 integrated digital interface, but I do not know abut one because I'm still waiting for my order. in any case, I want to control/communicate with both of them using your product, what is someone knows what software and what equipment I need? Thank you.
Tags: NI Software
I get upgraded my laptop (HP for laptop - 15-r224tx) for Windows 10 but I can't find the driver for the controller of PCI Data Acquisition and Signal Processing. Please help me find the right one.
You are the very welcome.
It is the latest version of the W10 driver for this card model... see if this solves the problem, if you have not already installed this driver.
This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.
File name: sp72517.exe
I installed win 8.1x64 on my HP Probook 450 G2, but miss me the driver of PCI Data Acquisition and Signal Processing controller.
Can you please help?
Please see if installing the Intel Chipset driver installs this device.
I just installed Win7 Pro x 86 on my Z600 workstation. It was an upgrade to Windows XP Pro. I'm missing the driver for PCI Data Acquisition and processing of the Signal and Hardlock USB 1.02 controller in Device Manager. Can someone help me find these drivers. I looked on the page of Support/Drivers for this model, but could not find anything.
You can get assistance on the HP Enterprise Business Forum since you have a professional worktsation.
Need driver for PCI and Signal Processing controller HP 240 G4-328TX Data Acquisition
Can anyone provide me please the link for download it for windows 10
See if this driver works...
Hi, it is impossible for the moment to install the driver for PCI Data Acquisition and Signal Processing.
I downloaded the driver from Intel, and it did not work... I found a version of this site for windows 8.1 unupdated and it does not work.
A little help?
It could be one of two different drivers.
Try this one first, and then restart the PC.
This package contains the Intel Chipset Installation utility. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager. This package is provided for the laptop models running a supported operating system.
If this does not work, try this one...
This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.
I just install windows 7 edition integral and peripheral Bluetooth windows 8.1 is not be detectable, when I search for problem that I came across this PCI data acquisition and Signal Processing controller driver is missing and a unknown device driver missing shownup in my result of troubleshooting. Please help me
Please find the screenshot for your reference
See if these drivers work...
CQI PCI controller:
This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the heat of the system
protection to work properly. This package is provided for the laptop models running a supported operating system.
File name: sp71638.exe
This package contains the installation package driver for Realtek bluetooth in the laptop models running a supported operating system.
File name: sp71288.exe
This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.
File name: sp71811.exe
I am facing problem in finding the right driver for material below.
1 SM bus controller
2 IBD DATA acquisition and Signal Processing controller
Download and install the Intel chipset installation utility and restart the PC.
The 2nd driver down on the left is the automatic installation file.
I am a researcher (a branch of civil engineering) geotechnical engineering and I have very little knowledge about the acquisition of control and data motion, so would need a lot of help from the experts OR. I have only knowledge base on these 2 aspects based on my reading of some materials on the Web site of NOR and youtube videos, so I hope that you bare with me . Here are my questions:
I am trying to build an actuator which will be used to push a probe (a penetrometer with a load cell to measure the resistance of a soil sample), resembling the concept, photography in the attached file. I need to have these criteria for my system:
(1) actuator, which can push the probe at speeds between 0.01 mm/s - 300 mm/s with precision and move the probe cyclically (upwards and downwards) in the vertical direction
(2) load expected on the probe into the ground range: 0.02kN - 6 kN.
(3) necessary to get the load cell load data and the speed of the probe.
4) able to control the actuator to a PC (speed and posotion) and monitor data from transducers and data log time even the transducers.
Guess my beginners is that I will need:
(1) software - LabVIEW and NOR-motion assistant
(2) controller - NI PCI-7342
(3) driver/amplifier - analogue servo AKD Drive
(4) motor - motor brushless servo AKM
For the acquisition:
(1) software - based LabVIEW development systems
(2) amplifiers or other device - no idea what type on the conditioning of signals
(3) data acquisition device - no idea what type
Since I'm a beginner, is - that someone might recommend components (hardware and software) for the control and data acquisition. I'm on a tight budget, so I thankful if someone could help me to recommend components good enough to build my system.
Thanks for your help.
At these rates, you will need to run the sensor for the cDAQ. You can configure the analog output on the Tritex nationally on the position. There is an adjustable filter that you can set in order to get a clean enough to 300 Hz signal. When you learn about the Tritex, make sure that let you them know what comms and e/s that you want to use. If I remember, not all options have worked together. The analog output may need to be my, but you can put a resistance through the acquisition of input data to get the voltage instead. I don't remember all the details. You should really not too much on the Tritex/LabVIEW side. You will send your movement parameters (beginning of end of race, speed, position, accel, cut), and if you cycle (I believe you) or simply running in a loop. You could also just be able to use the functions of jog. When you get close to knowing exaclty what you need, PM me and I'm sure we can work something out with the drivers. You need only the basics. In fact, you could probably do this all your movements via digital and analog i/o.
I'm new in labview and want to combine four different codes of labview and run them at the same time.
I use my data acquisition PCI-6071E and BNC-2120. I want to send an analog output (flat DC signal) to control a blower, an analog volmetre to a (DC) output pressure transducer, also receive data from a pressure sensor and hot wire probe.
I wrote four different VI for each of them (using DAQmax to output analog and DAQ assistant for analog inputs) and each of them works well, but when I want to use them together they do not work.
Anyone know how to make them work together?
To the DAQ Assistant, simply follow the instructions for the selection of multiple channels when you create (where he says quite clearly,' '
or to select multiple channels "). If already created, open the DAQ Assistant and click on "Add channels" at the top of the page.
When you use a physical channel name, you simply click on browse instead of a single channel. Use the same
or for multiple channels.
How to measure the angular velocity, the angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition?
There is a single channel data acquisition code which measures the angular velocity, angle and flexibility using a gyroscopic sensor breakout board and acquisition of LabView data attached to this, I need a help to creat two-channel data acquisition code?
Attached is a vi that you can use in order to read the measured angular position of an encoder.
If you need more examples on the tasks that you can develop with NOR-DAQmx and LabVIEW, you just need to open LabVIEW and click Help > find examples > Input and Output material > DAQmx > entry counter.
I have this laptop HP - 15-ac022ne and I got windows 8, evrything has not been totally perfect until I upgraded to windows 10, wireless function no longer works, tried to install the driver and update, it was succsessfully installed in the machine to say, but still not working and PCI data acquisition and signal processing controller driver is missing tried to download the chip set on the driver support page, does not, tried to update the driver through the Device Manager and the message can not find a driver for the device of said...
Please I need help...
You need this driver for pci data acquisition and signal processing controller.
It is a VI for the continuous acquisition of an ECG signal. As far as I understand that the analog read DAQmx VI must be placed inside a while loop so it can acquire the data permanently, I need perform filtering and analysis of the wave in real time. How I implemented the block schema means that data stays int the while loop, and AFAIK the data will be transferred on through the tunnels of data once the loop ends the execution, it clearly isn't real-time data processing.
The only way I can think to fixing this problem is by placing another loop that covers the screw scene filtering and using some sort of registeing shift to transmit the data in the second while loop. My question is whether or not it would introduce some sort of delay, and weather or not it would be supposed to be the treatment in real time. Wouldn't be better to place all the screws (aquicition and filtering) inside a while loop? or it is a bad programming practice. Other features I need to do is back up the data I na file, but only when the user wants to do.
Any advice would be appreciated.
You have two options:
- A. as you said, you can place the code inside your current while loop to perform the treatment. If you're smart, you won't need to put one another while loop inside your existing (nested loops). But it totally depends on the type of treatment that you do.
- B. create a second parallel loop to perform the treatment. This would be separate processes to ensure that the treatment is not obstacle to your purchase. For more information, see here .
Your choice really depends on the transformation that you plan to perform. If it's much the processor, this could introduce delays as you said.
I would recommend that you start at any place in the first loop and see if your DAQ buffer overruns (you can monitor the rear of the buffer during operation). If so, you should decouple the process in separate loops.
In what concerns or not ' it would be considered as real time processing ' is a trick question. Most of the people on these forums say that your system is NEVER in real time because you're using a desktop PC to perform processing (note: I guess it's the code that runs on a laptop or desktop?). It is not a deterministic systemand your data is already "old" by the time wherever he leaves your DAQ buffer. But the answer to your question really depends on how you define "real time processing". Many lay it will set as the treatment of 'live' data... but what is "actual data"?
Hi, I use NI SMU-6368 as a tool for data acquisition. In my experience, I use an external digital trigger to start taking measures of a thermistor.
However, before the experience, I want to know the time that elapses between the detection of the trigger signal and data acquisition start time.
Is there a way to do this?
Here's the kind of thing I configure to get an accurate measure of time of t = 0 trigger signal to the
the actual first A/D conversion. It may be too much for a measurement of the temperature, but you should get
the right track.
I have a rectangular steel beam that is affected with a weight of 100 kg and I would look for the modules able to sample the signal correctly.
The Nyquist theorem says that if half of the sampling frequency is higher than the input signal, it will be recorded correctly.
What I think about it before you buy a data acquisition module to find the signal of the rectangular steel beam? I will perform an analysis model by finite elements using the elastic properties or properties of plastic? Is the natural frequency of the associated structure of the input signal?
Some technical assistance is appropriate, determine that the higher frequency component is interesting to your signal. Set your frequency of sampling to twice this value. In addition, to protect data, to build a filter of antisliasing of material it alleviates any energy above the highest frequency of interest.
Maybe you are looking for
Yesterday bought Satellite E300/007 Windows7 Home Premium problem on Wi - Fi. The E300/007 Satellite can be connected to the router perfectly, but it is not work saying 'unidentified network' and 'no internet access. What it means? Can someone help m
I am running Yosemite (10.10.5) on a 15 "MacBook Pro with the display Retina (MBP). In the last four days, I burned about ¾ of a terabyte of various files (mostly photos) on DVD and CD using a USB 3.0 external drive (Pioneer BDR-XD06S). I copy a Seag
I use my Deskjet F2480 years (since 2009) and never had any problems, but since yesterday, I can't get my HP Solution Center to display correctly. When I click it, the box opens and everything is there except for any text. Therefore, I can not choose
Problem reading video file (AVI type) on Media Player error code 10 get "0xC00D11CD - Windows Media Player has encountered an unknown error", originally they worked very well, but not now, what is the problem if someone can help. XP
Hello everyone I use a Blackberry since 2002, but clearly have some gaps in my understanding of technology! At the moment I have to go to the help of my beautiful PRIV and transferred my 2000 + contacts from my old to my new Priv Q10 I don't use my