Data before release for NOR-6133 trigger material and acquisition continue?

I use the pxi of NOR-6133 can acquire data on 7 channels continuously with ai0 as the trigger without problems. The acquisition is triggered. What I have to do is collect a finite amount of data before triggering immediately until the trigger is detected.

Is it possible to do without the help of a software solution. I watched go over acquisition and using the integrated trigger reference but that is not suitable for my needs because it just seems to change the first section of data to be 'post trigger' to 'pre trigger.

A software solution that I already know how to do is the last resort to try to reduce the demand for processor and keep the hardware triggering.

Thank you

By using the "reference trigger" is the right solution.

So can you please explain a little more in detail why it does not work in your case?

Christian

Tags: NI Software

Similar Questions

  • E4200: Port before releasing for WOL?

    Some routers are capable of transmitting to broadcast directly by sending a port to 192.168.1.255, the other I was able to trap by transmitting to 192.168.1.254, and then editing the arp with 192.168.1.254 table <->ff: ff: ff: ff: ff: ff. Is there a way I can edit the E4200 arp table? Is there a way to telnet in or get a console connection?

    I activated successfully WOL through the E4200. My guess is that it works with most of the other Linksys routers. First, however, I would ask that Cisco has just enable this through their Web UI, this clearly isn't a big deal and a simple update (modification of javascript is all it takes). Please Cisco, do right by your customers.

    First, I created a port rule for port 9 UDP to *.254 forward (for most of you * will be 192.168.1).

    Then, I went on the button "Booking DHCP" and filled the form to "Manually add Client." My client called "wol" (yours can be anything). My etait.254 assigned ip address and the MAC address can be anything, you can simply copy and paste a MAC address that is already on the page and change the last digit...

    When you click on submit, the form is validated by Javascript; the form is not actually submitted until you press the "Save Settings" button.

    Before you save the settings, I activated the plugin Firefox "Tamper Data". This allowed me to change the form POST request before you actually send to the webserver built into the router. It is a little messy, but simply replace the MAC address that is appropriate in the field of the new customer.

    Presto!

    It's too bad that there is a silent Javascript validation, blocking a very useful feature for this router. A feature which can clearly already handled by the firmware.

    Once again, please do right by your customers, Cisco.

    Enjoy,

    Matt

    PS - This method could have an extra step. I will try using Tamper Data for entrer.255 in port forwarding form directly when I get a chance. If someone is able to do this, let us know!

  • Discover the date of release for the corrections

    Hi, I had a specific problem with the printing of Web pages, that I hope that the 717178 bug fix will solve. My users are really pushing for a solution, then, how do I know when this bug fixes will be pushed in the output channel, in order to test and advise if there is a solution?

    Thank you

    Kat

    Hello kat, bug 717178 shows mozilla21 (= firefox 21) as the target milestone. Firefox beta 21 will be released in early April and the final version will be available may 14.

    https://wiki.Mozilla.org/RapidRelease/calendar

  • Configuration of data flow between different 11 GR 1 material and GR 11, 2

    I have installation downstream between two oracle DBs are all two 11 GR 1 matter, I want to improve my my DB goal to 11 GR 2. I would like to ask if my streams set-up would work after that or not.
    OR
    Is it possible have continuously between two versions of oracle.

    I'll be grateful for you advice V.

    Hello

    Yes, it is possible to have Brooks set up between 2 different versions.

    Anand

  • CompactDAQ using to acquire correlated data force-position began with a trigger of digital material?

    Hello

    up to now, I use a PCI NI6221 card to acquire the data of time - correlation of two analog inputs and an encoder (line A and B), i.e. to get two supply voltages and position for each sample. The beginning of the acquisition is hardware-triggered by a digital line of PFI.

    In addition to assessing the encoder inverted /A lines and / b (to eliminate the errors of counting in harsh environments) I want to migrate this task to a CompactDAQ 9172 module with a 9205 (for analog), a 9411 (for incremental encoder signals) and a 9472 (for outputs digital additional static) inside.

    My question: is it possible to use the entry PFI0 of the 9205 as trigger of digital material to make an acquisition described above? Or how should I continue?

    Best regards

    cpschnuffel

    I would like to make a correction to my last post... we have actually supported for triggers the 9205 (analog and digital) to any location in the 9172.  Digital lines has always obey the same rules I mentioned earlier.

    So, you can trigger off the 9205 PFI line in any location, or outside either module in slot 5 or 6.

    I'll be sure to amend article KnowledBase that I've referenced once I have the chance to make it clearer and more thorough.

    -John

  • Clock set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system ARDAgent.app has been changed and cannot be repaired by disk utility. Files repaired permissions

    As soon as that connected with the password, the clock is set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

    Am also using Firefox 43.0.3 browser like Safari.

    'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

    You can ignore the above.

    Utility disk - permission errors, you can ignore

    System preferences/Date & Time/Date & time - is it set to automatically set the date and time?

  • How null out an article based on a column of data before posting?

    I use Apex 3.2

    I have a question that is based on the database column. My client wants me 'white out', the question which it is displayed so that the user will have to enter a new value instead of the one that is in the database.

    I tried to use a calculation "before the zone" to the element the value NULL. I can see the value prepares in debugging after extraction of the line took place, but when the item is displayed, it contains the value of the database, not my calculated valuie.

    I also tried using a field of text unsourced and then doing a submit after calculation to set the value of the element in a column of data from there, but no luck that way either.

    Also tried emptying the cache memory point, but I think it happens much too early.

    There must be a simple way to do...

    Any suggestion?

    No problem user486652 (name?).

    Yes, the $s function is one of the ApEx of built-in them - to see the ApEx documentation under the API, the Javascript API reference and you will find a variety of built-in functions that make all sorts of things. For Javascript, in general, take a look at www.w3schools.com for some really good reference material and tutorial - I use it constantly.

    OK, if you want to set the browser field to empty once the page loaded. Since it is an event of the page, it is not something that fires for a form field element, if you do not want the code here. ApEx 3.2, change the attributes of the page, and you will see a setting called "Attribute of HTML Body". You'll see a helpful note ball below the setting: this is the place to add onload events. The appropriate syntax will be:

    onload="$s('P2_REMEDY_TICKET', '');"
    

    Once the ApEx puts everything together and the rendering of the page, copy the following code will tell the browser to perform this $s function after the page load.

    But be aware - if you take a look at aid for that setting, you will see that it mentions that this will only work if your page template includes the #ONLOAD substitution string #. Do not know if all pages provided by ApEx models have already #ONLOAD #, but every one I've used. If your code still does not work, check your page tempate. In the area of definition, under header, you should see a body with something like tag:

    ...
    ...
    ...
    

    If it is, your page template supports the HTML Body attribute. If your body tag does not have a #ONLOAD #, add it.

    Hope this helps,
    John

    If you find this information useful, please indicate the 'useful' or 'correct' post so that others benefit. *

  • Fix ios 9.3.1 battery drain problem before I was on 8.4.1 and battery life was excellent but after updating to ios 9.3.1 autonomy got worse on my iphone 6. Apple company released please update to fix

    Fix ios 9.3.1 battery drain problem before I was on 8.4.1 and battery life was excellent but after updating to ios 9.3.1 autonomy got worse on my iphone 6. Apple company released please update to fix

    Please you not to Apple here. This is a user forum.

    Try som battery tips to save:

    Battery Saving Tips for your beloved iPhone

  • NI-CAN for NOR-XNET delphi application migration

    I want to migrate a NI-CAN for NOR-XNET application. My application running on a NOR-PCI-CAN Series 2 and I need work on an NI PXI-8512.

    I develop with delphi.
    I followed the tutorial 'NI-CAN NOR-XNET Applications migration': http://www.ni.com/white-paper/9717/en/
    I can see the map to the MAX as explain in the tutorial.

    I realized a small application that displays the data. This application works well with my first card, but did not work with the new.

    It draws in the NI-CAN, I use: ncConfig, ncWaitForState, ncOpenObject and ncRead.

    I want that my request of NI-CAN work on my new card without touching the source code. Is this possible?

    This tutorial is only for LabVIEW. I think you need to edit your source to use the new card.

  • Writing data to the file when the trigger is activated?

    Hi all

    I'm quite new in lab mode, and I find it difficult to find a solution to this problem quite simple. I installed a gauge on a tank, and each time, he reached the limit of overflow of the VI should write all data to a file. I implemented my data tables, but I am struggling to find a way to have the VI writing the data when the specific trigger (the tank overflow) occurs. I'm sure the solution is quite simple, but was faced with this during a few days now so I decided to ask for help.

    See you soon,.

    Gasim

    Gasim wrote:

    Seems to work, but the program stops when the trigger activates and asks you a file name to write on and then reset the whole process. Is that anyway so he can write the data automatically, without any interruptions?

    Yes, simply son by the name of desired file in VI of file write. If a cable it won't entice.

  • Mask of the data before the select operation

    Hi all

    I have a requirement to hide data before the sound coming from the front. I have to do this only when users
    In addition to United Kingdom will access the system. Kindly let me know how I can do it.

    Thanks in advance.

    Best regards
    Pavan Poirier

    Hello

    Probably the simplest and the most reliable thing is to use a view instead of your actual table.

    How do you know if the current user is in the UK or not?
    If you have a function that returns "UK" when he passed the user name, then the view may look like this:

    CREATE OR REPLACE VIEW  view_x
    AS
    SELECT  *
    FROM    table_x
    WHERE   COALESCE ( user_country (USER)
                     , '?'
                     ) != 'UK'
    OR      ...
    ;
    

    , or, if the "mask" means to hide some columns as well as (or instead of) of rows, use the function in a CASE expression.

    In Oracle enterprise Edition, you can also use a security policy line level (also known as virtual private database or VPD) on the table (or view).

    I hope that answers your question.
    If this isn't the case, give more information. For example:
    "I have a table like this: CREATE TABLE...".
    with this data...
    When the United Kingdom users say SELECT * FROM... they should get these results...
    but the other users shou; to obtain these results...
    The way to know whether a user is on the UK's...
    My version of data is... »

  • Turn off FileVault before update for Sierra?

    Hey, I wonder if I should turn off FileVault before update for Sierra? I was wondering if there is a response to this expertise?

    I'm not an expert, but I upgraded to Sierra without turning off FileVault. I also did the same thing when the upgrade to El Capitan and Yosemite. Had no problem with any of these updates.

  • Error message when you try to update the date of birth for child

    My kids already have Apple Id.

    I'll put up the family sharing and added them to the family using their Apple ID.

    The year of birth is not associated with their profile (guess it was not necessary at the time to create the profiles).

    So I try to update the year of birth, following the instructions provided on several Apple Support pages, for example Apple for your child - Apple Support and sharing of the family IDthat says: "If your child already has an Apple ID, you can update their email address, date of birth, Securityand more."  (date of birth = > link: date of birth associated with update to your Apple - Apple Support ID)

    BUT regardless of where and how I'm trying to update the birth year, I get the error message, it can not be updated at the moment...

    (screenshot Danish text)

    How to upgrade to the year of birth? Or when it will be possible to do the update?

    Kind regards

    Michael

    I understand that your child has had to date and that you will allow once you have received approval

  • When the iOS 9.3 is again released for iPhone 5 s?

    iOS 9.3 was interrupted due to a failure for older iPhones.

    I have a backup of my iPhone with iOS 9.3 5.

    My new iPhone 5 runs on 9.2.1 and he tells me that this version is the most recent. I am not able to upgrade and can not restore my backup.

    When the iOS 9.3 is again released for iPhone 5 s?

    y at - it another option to the update level or restore the backup with new version of iOS?

    Unfortunately, Apple has not yet released a bug fix, but if you consider the number of iOS users have been touched by the update in 9.3, it should be available soon.

  • How to find dates of purchase for Portege R200?

    We currently start laptop computer ownership with our machines Portege R200 and need to know the dates of purchase for these. We have our serial numbers and we owe it to the place where or what website to go to type the serial number and to know the purchase date of the machine with this serial number. How is that possible?
    Please email [email protected] with any help. Thank you!

    Hello

    I think that this can be managed by the Service of Toshiba partner.
    If the user has saved the unit so usually the service partner should be able to verify the date of purchase.

Maybe you are looking for

  • Create a bootable CD

    I was trying to run MEM Test to identify the problem and hopefully fix my card of 1 GB PC5300 DDR2 Ram that I just installed in my HP Pavilion a1340n.  Programming I have is WIN XP Media Center Edition 2005.  When I tried to copy the iso bootable on

  • Bugcode_USB_Driver blue screen on my HP touchsmart IQ770.

    I have a very hard time to find answers to this question. When I try to close the blue screen appears. I tried to download the drivers etc... I see that many other people have the same problem with windows vista there and I have read so many differen

  • How to get email after installing Windows 7? Help?

    I downloaded Windows 7 online, but how to repair Outlook Express is installed to receive emails? Thank you. :)

  • Jumble of creative enterprise Cloud of versions

    Then my uni given me a subscription to Creative Enterprise Cloud and I'm if confused as to why there is such a jumble of different versions of the software.I have:Premiere Pro 2015.3After effects 2014Hearing of 2014SpeedGrade 2015.In Adobes stupid ec

  • Goes back several clips to a sequence in a new folder

    HelloI have a sequence with a lot of clips, also with different color labels. Now, I would put all the clips of the same color in a folder (in the project window). If I select several clips and try to copy/paste or drag-and - drop, only a single clip