Data card Vodafone made black screen

Similar Questions

• video card and the black screen problems.

  Hello world! My desk top compaq presario sr1411nx don't seem to support a video card, I've recently tried

  to install. I put the card in one of the three open slots connected to the motherboard, and it seems to fit very well.

  The operating system I have is a Microsoft Windows XP Edition family version 2002 service pack 3, Celeron (R) CPU 2.80 ghz, 248 MB of ram.

  The graphics card is an ATI Radeon X1300PCI 256 MB. After I installed the card the following continues to happen.

  I turn the hard drive and follow on. The windows start menu back to the top.

  A message box appears telling me to close all programs. Restart the computer if the installation of the video card

  can be updated and completed.

  I then, restart the computer. After that I'm doing it just a black screen and white pointer popup. As I move the mouse

  There is no beep sounds. Browser menu and start the internet windows does not load upward.

  I then remove the video card and restart the computer and everything works fine.

  Question: What could be the cause, and I can fix it?

  Thank you

  Frogman

  Try to go into the cmos setup in the bios and see if there is any option to disable the onboard video as memory goes against zero or as allowing the pci. If not try to change the graphics card to the other pci slot

• Sat Pro A60 - screen backlight turns off after the connection with the Vodafone 3g data card

  I have a Sam Pro A60 which took a mounted Vodafone 3g data card. It connects OK data card but then the screen becomes 'empty' you can see the icons if you get the light from the window in the right direction, but permanently unusable.

  A reboot and the screen comes back. Are there keys, I can try to put light or ideas to test if it's a hardware or software problem?
  Thanks in advance.

  Hello

  It s a very strange problem. But I'll try my best ;)

  I noticed a similar problem on my second book. The display light didn't stop but the blue screen of death (BSOD) appeared and I could not continue my work.

  After a lengthy investigation, I found some useful tips.
  Someone told me that I have to disable HT technology (Hyper-Threading Technology) in the system BIOS settings.

  It's a key!

  As I remember the Satellite Pro A60 also supports this Hyper-Threading Technology.
  You can disable this function in the Toshiba HWSetup tool, in the CPU tab.

  Check it out and maybe it's a key as in my case.

  Dude good luck

• Skype for android - videoconference - black screen

  Hello
  
  I have a tab of lenovo S8 - 50 l (Intel x 86) with the new update of lollipop and Skype is not able to make a video call correctly from the operating system to date - is to show black screen where my video should have been. I am able to see the video of the other person, but mine is not available. During the test with my pc by the call of the Tablet, in the Office Skype my video power (from the Tablet) was empty, rolled a circle and there was a sign in the background with a hover on sayinf message something like "user x must update their Skype to participate in this video call."
  But Skype on the Tablet is the last available since Google play.
  
  Tried the same thing in Viber and the device works very well with the video call.
  
  I tried uninstall Skype and erase all the stored data, but it is always the same.
  
  You have no idea how this can be fixed or should I just hope that maybe a future update will fix the bug?
  
  Thanks for your replies!

  I have a solution for this problem! You need to install a 5.2.0.61097 version od Skype and camera work.

• HP Pavilion HPE h8 - 1213c: black screen of death because of the new graphics card (EVGA geforce gtx 960)

  I just bought a new card (EVGA geforce gtx 960) to kick some butt. But during installation, it seems to be held on a black screen of death? Not the most fun to see... in any case, I had asked the store clerk if it would work and he said to, but it doesn't seem like it does... Is there a new BIOS I should download or something? Any help would be nice...:.

  My computer is a HP Pavilion HPE h8 - 1213c

  The graphics card is an EVGA geforce gtx 960

  If you have both. You can use one or. PIN 8 can be used as a 6 pin as well.

  http://www.EVGA.com/products/ProductList.aspx?type=0 & Family = GeForce + 900 + Series + Family & Chipset = GTX + 960

  2 smaller cards use a single PIN 6. The rest use a single 8 pin.

• Black screen after the addition of graphics card to H530

  I am installing an EVGA Geoforce GTX 560 Ti in a H530. I have updated to 600w POWER supply and tried to set the parameters of the BIOS to the appropriate values. The BIOS settings are: display = AUTO, Secure Boot = Disabled, CSM = on, the Boot Mode = Auto (also tried Legacy), Boot Priority = first Legacy, Video Display = Auto (also tried PEG). Whenever I install the card and start, the screen appears black. Once I remove the card, the display returns normally. On board graphics uses VGA, GTX uses DVI. Any ideas?

  OK, it's pretty embarrassing that I almost didn't write back. The monitor I was using has entered both VGA and DVI. Apparently, it is default to VGA and I found a source selector to choose digital & now everything is cool.
  Why I decided to write back, also the closure of this point, is to note that higher speed graphics cards can be supported by the H530. I installed an EVGA GTX560 Ti, which is not the fastest of the world map, but it looks like that he compared with the list of maps in the maintenance manual which IMO aren't enough of an improvement to bother with. Anyway, maybe the Bios settings, I've used will help someone else.

• Dc7900: Graphics PCI - E card - black screen

  I just installed a Sapphire HD6450 in the PCI express port of my DC7900.

  You want to be able to use an HDMI port to connect to my TV.

  Whenever I try to install it will show a black screen (it starts up but nothing appears). It happens in a PCI-E port.

  As soon as I remove it, the computer works fine again.

  Have you tried to check the BIOS to see if I need to disable the onboard graphics, but there is no setting in there to turn off.

  Checked under Advanced / Device Options and not here. Check out the other menu items but can't seem to see anything.

  Have a BIOS 786 1 version 1.24 A

  I have a DC7800 in my living room and did not have a problem facility to that of the same graphics card.

  Help, please!

  Well, I thought about it. While I had ordered another HD6450 (which is the same card in my living room computer), a new one was a Sapphire card vs an Asus card in my living room computer.

  Of course, he had more power that the DC7900 and DC7800 could provide with their 240W PSU, however the Asus we had no problem. Crazy!

  In any case, to put the new card in my desktop (500W PSU) and it worked fine, then took the HD5450 (Sapphire) who was there and put it in my new DC7900. Sorted!

  Of course the same maps from different suppliers have different power requirements. (Or there was some other conflicts).

  Thought that posting this here in case others have a similar question...

• black screen after the windows logo when I install my video card

  Leadtek WinFast GT 220 1024Mo DDR2 graphics card

  I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

  I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

  You say you have "defective" material and you want a software solution?

  Any material support - including the drivers and other software that may be necessary to enable a hardware component to operate fully in a given operating system - is the manufacturer of the equipment.  So if you have a problem with your nVidia GT220 video card - your first stop should be nVidia.

  • Assuming you have Windows 7 64 bit, the drivers you want to include.
  • Assuming you have Windows 7 32 bit, the drivers you want to include.

  -In addition, you are in the hands of nVidia.

• Black screen after login screen. Possible graphics card issue?

  Problems to show after the desktop connection screen. Just the mouse pointer. Everything works in safe mode.

  I have a graphics card separate installed and it worked flawlessly during the initial installation. I think there was some windows update that happened on its own and from there I get the black screen.

  I'm "cleanbooting". All graphics cards are updated... what I have to do.

  Hi Justin,

  I can understand the inconvenience caused, be assured that we are here to help with your concern.

  In order to isolate if the problem is caused due to incompatible display drivers, I suggest to start in safe mode, then follow the steps below.

  1. Right click on the Windows logo, and then select Device Manager.
  2. Expand the display adapter.
  3. Right-click on the display driver and select Disable.
  4. Restart the computer in normal mode.
  5. Sign in and check if you can see the desktop.

  Let us know the status so that we can help you.

• Satellite A100-033 - black screen with no data after the advanced boot option

  I tried each F8 option in the advanced boot options to get my work laptop. There is just a black slowed after repairing Windows files and Loaded. Also F2 & F12 even when I try to use the recovery disk it remans black?
  Safe mode: nothing is displayed on the screen at all

  I noticed my mouse cursor can be seen moving around the screen, but the rest of the area is black.

  OS Windows Basic 32 bit IE9 Satellite A100-033

  Hey,.

  So if you start from the Toshiba Recovery disk you also get a black screen?

  What happens if you start from a normal Microsoft Windows disk? Just to make sure that it of hardware related problem or not

• Windows Update: 1 or several updates made a black screen after restart

  So I have this problem for like 3-4 months ago... You all a long history, he gets to that: an update of specefic is originally that when I restart, the computer still works, but the screen is all black. Not even a light down there!
  Someone knows this problem?
  The update that I am sure that all this is cause:
  KB929729 (a security update for Microsoft .NET Framework, version 1.1 SP 1) - I think this is the one, but could be one of these schools:
  KB957000 KB952714, KB929735 - all these are just regular updates for vista x 64-vista systems

  I have the laptop to fix where I bought it. They said that the problem has been resolved, but it didn't. Well, the computer worked as if after I came, but after a Windows Installer update, the system crashed again with black screen.
  Fortunately, I was able to use an ERD to do a system restore to before installing the update.

  MY LAPTOP SPEC. :
  Windows Vista, home Edt. (SP1 has not been installed now, but had SP1 when the 1st problem started)
  Processor Intel Core Duo CPU 2.4 GHz
  4 GB of Ram
  NVIDIA Geforce 9650 GT

  OK, I'm pretty sure it's KB929729 (a security update for Microsoft .NET Framework, version 1.1 SP 1)
  She is marked as an important update, hope that I can live without it?

• Windows XP when turn on goes to a black screen with try modes of 3safe with one last configurationbut known dates back to the same place when try one of them

  computer guard reboot throughout the day without ever getting on linekeeps return to black screen with black letteringwith 3 safe to try modes and one with the last known configuration. like the square opens to enter the password it goes back to black with same imformation on screen.

  You may need to do a reinstall or maybe just a repair installation.

  Put your installation cd in the cd-rom drive and restart your computer, you will be asked if you want to repair or reinstall choose repair.

  http://michaelstevenstech.com/XPrepairinstall.htm

  read above site via before the attempt.

• Toshiba crash with 3G data card

  Hello

  hope someone can advise. I've been using a Vodafone 3 G datacard in my PCMCIA slot in my Toshiba Satellite A75-S226 [purchased in the USA] - unfortunately on the first night of use - it has been problematic.

  at first, I loaded the software and inserted the card and hey presto, I was online on the wonderful web without a phone in sight line.

  After only 20 minutes - the pc crashed - complete blackout - rebooted as I thought it was a stop of the battery (not on the AC at this point).

  It wasn't. 12 the cell breaks down - screen sometimes black, sometimes white screen - in almost every use of the card 3G - sometimes, it crashes when the card is inserted, sometimes it works and I'm in line for one minute (or 5 or 10 or 15 - who knows) but it still crashes

  I removed and re installed the software several times, spoke with vodafone and installed 3 alternative versions of the software - 2 old and more recent 1 (later).

  I tried another card 3 G on my laptop and it crashed. I used my card on the pc of my neighbour without difficulty. ERGO - the problem comes from my pc - and it is an interaction with the vodafone card and/or its software.

  This isn't somehow due to overheating, as the shutdown problems mentioned on other threads seem to indicate - if my laptop runs perfectly and can run for hours to child's play.

  I'm not sure is the extent of the use of 3G data cards, but maybe someone can advise.

  PS I am the person most untechy to join a computer forum - so less jargon and more explanations would be useful - think of me as your old uncle doddery, but with more hair

  concerning

  stoky jed
  London

  Hello Jed

  Unfortunately, this is a specific problem with external Toshiba no product, and in this case, I believe that Vodafone people have a lot of experience with troubleshooting. Try to contact them.

  Otherwise, you can use advanced search option and search using the word VODAFONE. As far as I know there must be a few topics with the same or similar issue.

  You can also check the knowledge base on http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=TIC2 Toshiba site and Vodafone as searchtext. Check it please all documents. I hope that you will find useful information.

  Good luck!

• L220x random black screen

  Hello! I have a serious problem with my L220x new and this forum is kind of my last idea to look for a solution. Maybe someone can help...

  Apparently randomly, I meet the following (from the office, the video games, full screen)...

  1 several times per day

  -l' screen goes black for about 1 second

  -the Office returns

  -the mouse pointer has made a leap toward the center of the screen

  -the processor load is 100% for a few more seconds

  -Repeat a random number of times (~ 10), then everything continues to be calm

  2. on every two days

  -(1) which happens, but ends with

  -l' black rotating screen for about 3 seconds

  -windows playing material 'disconnected' sound

  -and then the sound "connected equipment".

  -If I have my TV attached, the display with 1024 x 768 and display my TV as primary (!)

  -If I have the TV that disconnected, the screen comes back as usual

  3. once in the last week

  -(1) happened

  -l' black screen turned

  -windows has played the sound "hardware disconnected."

  -l' screen remained black. I was able to stop with soft-off windows, after reboot, everything was normal.

  I have already tried a bunch of things, tinkered around card drivers and graphic screen, and finally, reinstalled windows (for several other reasons, too), but the problem persisted. Does anyone have an idea?

  My system:

  SP1 of Vista Ultimate x 64

  Radeon HD2900XT (from Gecube, 'BuiltByATI')

  Connected via DVI L220x

  CRT TV connected via Composite

  L220x as main display, TV turned off with CCC

  all drivers up to date

  Thanks for all your suggestions,

  I wanted to just let know you that I found a solution to these problems. It turned out that they were caused by ATI external Event Utility service - I disabled it, finished.

• Black screen, then automatic reboot

  If it isn't one thing, it's another. You guys have been up to perfect present to solve my problems, so here's one for you. I get a black screen suddenly casual with an automatic restart, sometimes with an error message that says that my computer "has recovered from a serious error".  Sometimes it doesn't even bother with that.  Now, let me tell you how that made my life: I'm an old fart who like to play online card games. In the 1960s to play hearts, I've never played a perfect match. I was just a touch away from my first perfect game when the screen went black. AAAAAAAGH!  The first person who solves this problem will be first in my will - even in front of my wife and grandchildren.

  Daniel Shouse

  Hi Daniel Shouse,.

  ·         Did you do changes on the computer before the show?

  ·         What is the exact error message?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Windows XP restarts unexpectedly or restarts when you shut down the computer

  http://support.Microsoft.com/kb/320299

  Method 2: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3: Update the latest drivers to display/graphics.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658