Data loss when writing to the worksheet

Similar Questions

• IPhones and accessories experience data loss when you browse the different areas?

  When I walk with my iPhone in my pocket, I can't always hear, it sounds.  If I miss a call and that you do not receive the message immediately, it is possible that the exchange rate between service providers can cause pieces of data to lose?  I receive messages from unknown numbers and I was wondering if it is possible my battery charge low battery of accessory led me to file an appeal by mistake while the phone is charging.  (It already happened several times with different systems, products and service providers).

  I don't think that accessories are the original data or call loses. More likely, it's the fault of suppliers or a weak signal area. I get occasionally missed calls and yes I think that some data may be lost. Just IMO...

• My ipad is disabled. How to activate ipad without data loss? I know the password

  My ipad is disabled. How to activate ipad without data loss? I know the password

  You can not. If you know the password, how the iPad become disabled? If the device is disabled, the content is not already available. The only way to recover the device is to restore. You can restore your last backup after that. Follow the instructions in this document support. If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• Why did I lose macros when you save the worksheet

  I opened a spreadsheet with the macro code and vb and when I save it it loses the macro.  the worksheet is protected and allows changes to cells not formulas.  When I save the worksheet, he loses the functionality to make changes.  I wrote the code in vb to allow this, but who does not feature

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums

  MSDN forums
  http://social.msdn.Microsoft.com/forums/Mr/category/VisualBasic

• Age of Mythology of installation met a disk error when writing in the file C:\Users\(my name)\Desktop\aom\textures\textures.bar

  Age of Mythology of installation met a disk error when writing in the file C:\Users\(my name)\Desktop\aom\textures\textures.bar. Make sure that your hard disk is not full, and that the file is not in use

  Original title: AOM moved only to 94%

  When I install Age of mythology, I have put on disc 1, do all the stuff, he moved to 45%, and then it asks me to put in disc 2. I do, and he moved to 94%, which is the stage that she calls 'Copy texture.bar' then it stops and I can hear the disc turn and stop repeatedly. After about 10-15 minutes, I get an error message and it said:

  "Age of Mythology of installation encountered a disk error when writing in the file.

  C:\Users\(My Name)\Desktop\aom\textures\textures.bar.

  Make sure that your hard disk is not full, and that the file is not in use. »

  I know that my hard disk is not full, because I just got this computer a month ago. In addition, when the disc is, it vibrates and makes a buzzing sound that only stopped when I put my finger on the space between the disc and the side of the laptop.

  Could you please help me?

  See if it's in the download of the demo. http://AOM.HeavenGames.com/

• Waveforms of writing to the worksheet to help to write on the worksheet vi

  Hello

  Problems with writing 2 waveforms of the myDAQ to a worksheet. Using the "write on the worksheet vi.' does not work as it records in the file, but when you open the file to look at the results, there is no data." I got a screenshot of used vi, unfortunately the file as an attachment could not be validated. Someone sees the problem and no solution?

  http://i50.Tinypic.com/2isil8w.jpg

  Thank you

  You need to do a little basic troubleshooting. Make a right-click on the son goes into the loop, and selection "probe". After you run the VI, the content of the probe and see if there is no data there. I had to put a delay in the loop of the acquisition or specify a number of samples to get the data in a consistent manner.

• delays when writing with the pec in Portege M200

  I face a very obvious slow in exercising the hand writing in tablet mode.
  usually, I write "with a single note" and writing is instantly displayed in normal writing on paper.
  but when I tilt the screen to be in tablet mode, what I write is not displayed unless I finished the whole word, and display is normally extremely slow.
  Although if I tilt the screen to normal laptop mode "with the same session a note" the speed is back to normal.
  Please notify.

  Hello
  I ve tried to simulate your problem with my M200

  I couldn't see a Performance distinction between modes of Tablet PC and the PC Normal.

  Could it be that you´re by using the Tablet PC Modus in battery operation?
  Then of course as a result of the power management the M200 runs slower.

  Good bye

• Keyboard/mouse coursor jump when writing on the Satellite a series

  Sometimes the point of keyboard moves in another place of the text while typing. Its very strange and annoying. We find occasional and it is difficult to repeat.
  I don't know why this is happening.

  I'm trying to install the drivers but it does not help. His sometjing as the mouse cursor that is 'auto click' that is to say in this text mouse cursor was above this line and I wrote this sentence. Its impossible to write a long text without it. Maybe someone have the same problem or know what the problem is?

  Help, please! It drives me crazy, my new circuit is unusable for work and he was buyed. This only happens when writing text (notepad, word, firefox, etc.).

  BTW. Sorry my English :)

  Nothing unusual ;) happened on my laptop too. And finally I ve found out what the problem was.

  I ve just tap on the touchpad accidentally during the strike. I recommend you to disable the touchpad while typing.
  You can use the FN + F9 key to disable the touchpad for a while.

• Problem of width of column writing to the worksheet

  Hello world

  Does anyone know how to adjust the column width when you use the "write to the spreadsheet" vi in Labview?

  I always have a long string as the title and the excel file would show only part of it after that I dump them to it.

  I'm not sure that the width setting is Microsoft Excel or Labview himself.

  Any help is appreciated,

  Thank you very much

  + Kunsheng

  Hi Kunsheng,

  If you use the function 'Write to a spreadsheet file', then you can not set the width. You create a txt file with this function, not real excel file. For a true Excel file, you can use ActiveX.

  Mike

• Insert the date and time in writing to the worksheet

  Simple question here

  I need save 4 data tables and insert the date and time at which it was taken (LV 8.6)

  for example

  04/09/09 10:00:01 4 6 7 2

  04/09/09 10:00:02 4 6 7 2

  04/09/09 10:00:03 4 6 7 2

  04/09/09 10:00:04 4 6 7 2

  Any ideas, I can't wire the right timestamp or date/time string in the table to create

  Thank you

  Chris

  Someone there doing the same thing that I am, I got it to work with the attached VI.

• Writing in the worksheet

  Hi all. I have my attached Vi, which does nothing more than feeding an output voltage of 1 to 5, each 3-seconds, unless you press the stop button. I don't like the stop button, I chose because, if accidentally put in true state before you run Vi, it throws an error I do not know how to recover from. However, this isn't what concerns me is, for the moment. I'll try to fix it on my own first. What I am not sure do now is to know how to write a value in each case on a spreadsheet structure. I tried to use arrays and store the data of each case of effluent to a location on the table, without a bit of luck. I went through section 1 basic tables to see what I'm doing wrong, did not help me. It must be much easier I have do it. First of all, am I right to assume that I must first write this in a table, and then transfer the data at the end of the cycle Vi, or should I write directly to a worksheet after the close of each business structure? I thank very you much.

  
  

• RT-target short-term memory when writing to the network stream

  Hey there,

  I have a program that transfers data acquired from the FPGA to the host PC. RT - VI reads data from the FIFO DMA and writes it to a network stream (BlockDiagram.png).

  Now, I am a phenomenon, that the RT-target load his RAM until it is full and accidents.

  I have no idea why this happens, network flow buffer is empty, all the items are read by the host, and there is no table built by indexing or so.

  Someone has an idea, how I can handle this?

  Best regards

  Hey there,

  I had the problem solved,

  the problem was the buffer of the sender endpoint was too big. Unlike this problem: http://digital.ni.com/public.nsf/allkb/784CB8093AE30551862579AB0050C429, wasn't the growth of memory because dynamic memory allocation.

  It is just the normal speed of the cRIO while allocating buffer. The sender buffer affecting many smaller, memory growth stops at a specific level (DSM2.png).

  It is strange, this use of memory that grows slowly, despite the creation of the endpoint with preallouee buffer, so that its use dark quickly when the VI - enforcement stops...

  Best regards...

• A date today can be added in a date field when you press the submit button?

  I created a form with a "submit" button and the form is sent by e-mail.  Then the date when the form is submitted to appear in a date with the key field is pressed?

  
  Any help with this is appreciated. Thank you.

  Hello

  There is a preSubmit event to form objects that you can use.

  Select your date field, open the script editor and add this script (language is FormCalc) in the preSubmit event.

  $ num2date = (date (), ' MM/DD/YYYY')

• How publish data from the table with some data loss all post in the forum

  I wonder how people are displayed the data in the table or the result of a query with losing them its format from Sqlplus display when they post in the forums of Oracle. I searched on the basis of knowledge of DB but I see no article about it. can you please help me or direct me to this link, I tried different options using code and other tags but nothing has worked, thank you for your help. Thank you.
  
  Edited by: Ariean October 3, 2011 12:34

  You can click on the link to the FAQ at the top right: http://wikis.sun.com/display/Forums/Forums+FAQ.

• Why PE10 uses the incorrect date format when it creates the files during import?

  Hey,.

  Since I upgraded to 10 EP, I had a problem with the date when the import format.  I have always used the format yyyy-mm-dd when I import my pictures, and this is the format that I choose when I import using Organizer, but it invariably creates files in the format yyyy-mm-dd.  It becomes tedious to rename folders.  Any advice?

  Thank you!

  Hello

  Try the appropriate fix

  Mac: http://kb2.adobe.com/cps/930/cpsid_93...

  Win: http://kb2.adobe.com/cps/930/cpsid_93...

  Brian