"Data was overwritten before it can be read by the system" count with PCI 6601 with 20 MHz clock
Hello Aditi
What exactly is the purpose of the use of the clock of 20 MHz? You count the edges of it?
You can try to use the VI DAQmx Configure entry 'buffer' to increase the size of your buffer. You can also use the DAQmx channel node to set the DMA data transfer mechanism. If you create a channel node, you can get to this specific property through this path: counter of entry: general properties: learn more: Advancedata transfer and memoryata transfer good mechanism.
Tags: NI Hardware
Similar Questions
-
Hello
Installation program:
2 x PCI-6602
Configuration:
Sampling the five PWM signals of 50 kHz using five counters (2 on a map) and three on another for about 10-15 seconds by recording continuously.
All meter tasks are configured for DMA transfer.
Problem:
I get 200141 errors from time to time.
Question:
I tried to increase the size of buffer and all tasks of meter are set to DMA. In the error message the last suggestion is to "divide the input signal before taking the action. I don't understand this suggestion. What is meant by "split the signal before taking the action?
I am open to other solutions to the problem.
/Mola
Yes, I know that the 2 MB/s sound do not like much, but it's a way of high load very low tolerance to try to get 2 MB/s. You have 5 DMA controllers to negotiate access to the bus and each transmits only 1 or 2 samples of 32-bit whenever he gets access.
I've seen published baseline data where the maximum sustained rate was< 1="" million/sec="" (don't="" recall="" if="" it="" was="" mbytes="" or="" msamples). ="" as="" i="" recall,="" finite="" acquisition="" mode="" allowed="" higher="" rates="" for="" shorter="">
Ah yes, here is a link that leads to the other links. See the section on "The counter of the FIFO" in the first message. Do you see a * very * significant difference in the performance of the M series for the series X-series. Here are data for counters of the E series. (It is fair to note that the comparative analysis was conducted with a much older PC hardware). For the 6602 counter chip was designed between E- and M-series series, so you can probably expect performance in-between.
Also note that the benchmarks seem to have been done with a task of window unique tent of owning all the bandwidth PCI as possible. Since you would have 5 tasks they negotiate access, you lose definitely even more overhead. In addition, for fair comparisons, your 50 kHz PWM would act as a measure of 100 kHz since you have 2 semiperiods to DAB per cycle of 50 kHz.
Now that I've seen benchmarks once again, I am convinced that it is a no-go for you with just the 6602. The good news is that the series X-series seem able to yet more ridiculously than I remembered.
-Kevin P
-
data has been replaced before it can be read by the system
Hello
I use a flow sensor that creates a frequency output and which connected to my PCI-6035E. When I run it, it works for a few seconds and then gives an error. Error 200141 ' data has been replaced before it can be read by the system. " I also tested with a pulse rather than the flow sensor generator, and the error only when I changed the frequency. How can I solve this prolem?
Thanks in advance!
Thank you for your answers, Bob.
I got it now works, the problem was that I was using continuous samples. I am now a single sample with a while loop and it works.
-
I can't read the policies of Burma in this latest version of firefox, which can be read in the old version.
This happens with other languages?
-
My errased sticker product key and I can't read all the text to reactivate my windows visa. What should I do now?
Hello
You mean the sticker on the case of the Vista operating system pre-installed from Dell, HP, Acer, Toshiba, etc.) ?
If you do, you can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.
Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.
If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.
The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.
See you soon.
-
The key to Windows inlegible sticker, want to reinstall windows
What can I do if I can't read that the key is for Windows because of the part of the key on the sticker has rubbed off and must be re-installed Windows? The product ID is located under the control panel > system maintenance > system > Windows Activation of a useful? I don't want to end up with a Clipboard after that reinstalling Windows because I have a legitimate copy of Windows, but the key became disfigured over time, since it's on the bottom of the laptop. I have Windows Vista Home Premium SP 2 running on a Dell Inspiron it's way outside the guarantee of its window.Thank you!Hello
If you have a product key on a sticker in your computer, this means that you have an OEM product key. If you have OEM keys, this means that the windows you have here is preinstalled.
If you reinstall windows OEM copy, you must use either the original manufacturer recovery disk or the recovery partition. If you use one of the people, should not be put to any start-up because the windows OEM versions are technically preactivated.
If you don't have a disc or a recovery partition, you can contact your OEM (DELL) so that they can send you a disk. Alternatively, you can contact Microsoft Support just in case. : D
-
I have a SAMSUNG RV510 laptop and the built-in webcam was working before and now, if I have the webcam the screen is in night vision which is entirely green. I tried to restore and re - install the drivers and even removed the chip back and webcam is plugged in but nothing works.
Please give me a solution for this.
Thank youSee its unlikely a MS or Win, Samsung help/support solution or their forums, its their equipment and their program
-
I upgraded from vista business to windows 7 premium. Now I can not read DVD or install programs with disks, etc.
If your dvd player is as it does not exist and is one of those listed below you may need a firmware update. If this isn't one of those listed so my answer does not apply to your situation.
If your dvd player is one of the following values, see kb975270
Sony BC-5100 s DVD
Sony BC-5600 s DVD
TSST TS-L633B DVD +/-RW DRIVE
-
I tried to convert doc to the pds. He converted all the files in you folder to the pds. The problem is that I can't open any files without buying adobe. I can't unconvert so now I can't read all the files?
May I know the process to convert Doc to PDF files. If you use Acrobat to convert the files, and then with the same application you open.
If you used another process, in this case try using the Adobe Acrobat Reader application. Adobe - Adobe Acrobat Reader DC Distribution
Thank you
Abhishek
-
Im having problems with my new rig. All of a sudden it stops working when I just run windows, it can takes minutes to BSOD or seconds.
I checked the event viewer and that's what I have.
Event ID: 41
Task category: (63)
Level: critical
Key words: (2).
User: SYSTEM
Computer: Sprutmunn
Description:
The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.
The event XML:
41
3
1
63
0
0 x 8000000000000002
1370
System
Sprutmunn
10
0 x 0
0x2
0 x 1
0xfffff802e1ccb722
0
0
0
IM, including the dmp so file--> https://www.dropbox.com/s/9srgscrrwm96jeq/060814-6578-01.dmp
I hope some of you guys can help me, ill be happy for all the advice you can provide.
Thank you
TJ
This phenomenon was related to iaStorA.sys Intel Matrix Storage Manager driver from Intel Corp. It is a buggy especially with SSDS driver or hybrid. I'd install the most recent driver available, even if it is the same date that drivers become corrupt.
If you have a SSD drive or hybrid don't forget to update the firmware and you really need to update to win 8.1, you will stop to get the updates bit of time if you do not have.
Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.Loading dump file [C:\Users\Ken\Desktop\060814-6578-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol of validation of the path summary *.
Location of response time (ms)
Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (8 procs) free x 64
Product: WinNt, suite: TerminalServer SingleUserTS
By: 9200.16864.amd64fre.win8_gdr.140309 - 1509
Computer name:
Core = 0xfffff802 'a 5088, 000 PsLoadedModuleList = 0xfffff802' 50b56aa0
The debugging session: 17:49:48.785 Sunday, June 8, 2014 (UTC - 04:00)
System Uptime: 0 days 0:01:33.409
Loading the kernel symbols
...............................................................
................................................................
............................
Loading user symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
Bugcheck A, {0, 2, 1, fffff80250944722}
WARNING: Unable to verify timestamp for iaStorA.sys
ERROR: Module load completed but symbols can be loaded for iaStorA.sys
Probably caused by: iaStorA.sys (iaStorA + 6710a)Follow-up: MachineOwner
---------0: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If a kernel debugger is available, download the stack trace.
Arguments:
Arg1: 0000000000000000, referenced memory
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bit field:
bit 0: value 0 = read operation, 1 = write operation
bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
Arg4: fffff80250944722, address memoryDebugging information:
------------------WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80250be2168
GetUlongFromAddress: cannot read fffff80250be21f8
Paged 0000000000000000CURRENT_IRQL: 2
FAULTING_IP:
NT! KeAcquireInStackQueuedSpinLock + 32
fffff802'50944722 488711 xchg rdx, qword ptr [rcx]CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
Nom_processus: System
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre
DPC_STACK_BASE: FFFFF80251BE3FB0
TRAP_FRAME: fffff80251bdd730-(.trap 0xfffff80251bdd730)
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = 0000000000000002 rbx = 0000000000000000 rcx = 0000000000000000
RDX = fffff80251bdd930 rsi = 0000000000000000 rdi = 0000000000000000
RIP = fffff80250944722 rsp = fffff80251bdd8c8 rbp = fffff80251bddab0
R8 = fffff80251bdd930 r9 = fffff880019a3800 r10 = fffff80251bdd870
R11 = 0000000000000002 r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv up ei pl zr po nc
NT! KeAcquireInStackQueuedSpinLock + 0x32:
fffff802'50944722 488711 xchg rdx, qword ptr [rcx] ds:00000000'00000000 =?
Reset the default scopeLAST_CONTROL_TRANSFER: from fffff802508e3769 to fffff802508e4440
STACK_TEXT:
fffff802 '51bdd5e8 fffff802' 508e3769: 00000000' 0000000 a 00000000'00000000 00000000'00000002 00000000'00000001: nt! KeBugCheckEx
' fffff802 '51bdd5f0 fffff802' 508e1fe0: 00000000 ' 00000001 fffff802 ' 51bdd930 ffff38d7 '6a9e1d00 fffff802' 51bdd730: nt! KiBugCheckDispatch + 0 x 69
fffff802'51bdd730 fffff802'50944722: fffff880 '0176610a 00000000 00000000' fffffa80' 0d4cdb90 00000000'00000002: nt! KiPageFault + 0 x 260
' fffff802 '51bdd8c8 fffff880' 0176610a: 00000000 ' 00000000 fffffa80 ' 0d4cdb90 00000000'00000002 00000000'00000000: nt! KeAcquireInStackQueuedSpinLock + 0x32
fffff802'51bdd8d0 00000000' 00000000: fffffa80'0d4cdb90 00000000'00000002 00000000'00000000 fffffa80 0'c 770500: iaStorA + 0x6710aSTACK_COMMAND: kb
FOLLOWUP_IP:
iaStorA + 6710 has
fffff880'0176610 has? ???SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: iaStorA + 6710 has
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: iaStorA
Nom_image: iaStorA.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 51fb0de8
FAILURE_BUCKET_ID: AV_iaStorA + 6710 has
BUCKET_ID: AV_iaStorA + 6710 has
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:av_iastora + 6710 has
FAILURE_ID_HASH: {f733faf2-d2a8-1b11-9fa3-afbe5930de67}
Follow-up: MachineOwner
--------- -
Hi, I just bought Adobe Acrobat Pro DC. I used the link that was sent to me to download. But the download was not successful. After trying 5 times, the system says, now I downloaded too many times and has refused to let me download it again. Someone from Adobe is reading this? How can I get this fixed a problem? Thank you.
-
How can I Albums in the Photo App with images taken at different times.
How can I Albums in the Photo App with images taken at different times.
I had books in Aperture and iPhoto which have been labeled 'Family', 'Friends', etc., and I would like to move the images in the album, and there no matter when it was taken.
Thank you
Brian
In the same way. Make an Album and drag the images to him. Key word or images and the use of the smart Albums.
-
Hello, I bought Creative Suite Master in October 2014 and my computer was stolen from my car to that effect the license associated with this machine, therefore, is more accessible to me. You have a function to disable this computer with my purchase, so I can reinstall it on my newly purchased machine?
Contact adobe during the time pst support by clicking here and, when available, click on "still need help", https://helpx.adobe.com/contact.html , and request activation reset account.
-
my friend has gmail... I can't argue in the MSN window with her
my friend has gmail... I can't argue in the MSN window with her
Which has absolutely nothing to do with Windows Update or Windows itself.
Support MSN:
http://support.Microsoft.com/kb/940784 -
original title: WiFi
I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.
I use a Huawei E585. I simply want to clamp it alll in the tray.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
(1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).
(2) START, CONNECT, WIRELESS INTERNET CONNECTION
--> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~! (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;
--> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network
3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)
Maybe you are looking for
-
When I delete emails from my iPhone 5, same emails deleted from my Mac desktop. There are a lot of emails that I want to keep on my desk that I don't want to keep on my phone, for reasons of capacity and convenience. This link happened recently - b
-
Equium A60: How to clean the screen
Hi... using equium A60 for 4 years.There are fingerprints and marks on my screen for a long time, I tried to wipe with a cloth dampened in water, to my surprise, that would leave more big brands then before. Brands are not visible when the system is
-
Vista - Error Code: 80070643 (cannot install updates)
All the update failed for
-
My Aspire V7 582PG cannot detect external monitors
I recently bought an Aspire V7 582PG, put in a new SSD and then installed Windows 8. The laptop works well, except that it cannot detect external monitors (in Control Panel, I get "Has not detected a different view".) I tried with 2 monitors (differe
-
Can't leave homegroup-"access denied."
Original title: can't leave homegroup Hello. I have an HP laptop and an Acer PC. The laptop won't let me leave the homegroup, I tried of deletes the idstore.sst file but access is denied to the C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\