database conectivity
Hello
I am new to SQL server and Toolkit for labview data base connectivity. I made a program to write the data in the SQL table but I get the error message "ADO error: 0x00000001.
Error argument; the number of columns is not equal the number of parameters. ». I have attached the error message. Please help me out here.
Kind regards
Abreu
In fact, this problem is a case perfect for why the CSD is a very bad choice. The problem is that the error message is not clear at all. The problem is that you turn your input strings in a Variant array, but the result is a variant that contains an array of strings. What entry wants - but doesn't tell you - is that he needs a table of variant where each element is a variant with a string in it.
Much better to use a simple interface that allows you to enter SQL directly. Then when you get an error, you can be sure that the error is actually tell you what the problem is. Check here for a more comprehensive analysis of the subject and some drivers causing problems.
Mike...
Tags: NI Software
Similar Questions
-
Database conectivity toolkit.
Brilliant Hola comneze a project in el cual quiero mandar mucha information a una base data, this information (strings, numericos etc.) no solo is almacenara sino is envia a dica base datos paro poder ser modificada, elminada, actualizada etc., ahora lo than sucede are're her primera vez con trabajo databases datos quiero saber than me so o SQL access , o which his las and/or the application are UN tanto pero esta desinteressada para envar information who annoyingly at the base.
A y if possible connect esta base datos a UN servidor?
Slow el modulo Data Base Toolkit of LV Conectivity are what planeo usar lo me is replaced by Recomiendan?
Lo sucede in the imagen are el los datos numericos works VI has the perfeccion y el los strings (derecha No. works) in the Izaquierda el probe the conexion uso para the del VI Nuevo client app y fucniona correctamente lo determina the conexion are correctay the database (access 2010 pero configurado para .mdb) entonces el error're en el codigo pero are equal?
-
Hello
I am using the trial of dreamweaver and following a tutorial on YouTube, I have the program installation wamp and all is runing OK but in dreamweaver, I can't find the tab "database" Conect my test on the site database.
Can someone point me in the right direction as to where that?
Concerning
SirBasher
PCOC removed server behaviors, databases and links as part of their efforts to "modernization". The built-in versions DW were very outdated and is about to get worse. They pack them as an extension of the program if, you just have to allow him...
-
Database AutoClose Conection.
I created this oracle for call reports of Ireport conection:
Context ctx = new world;
DataSource ds = (DataSource)ctx.lookup("java:comp/env/jdbc/myConnectionDS");
How can I put it because it close automatically in 20 seconds after we use it?You must close the connection when you are finished with them, try this
Context ctx = new InitialContext(); DataSource ds = (DataSource)ctx.lookup("java:comp/env/jdbc/myConnectionDS"); Connection conn = ds.getConnection(); //call the report conn.close(); //this will release the connection back to the pool
Of course, the connection will be always remains open once it is returned to the pool, so one option would be the size of your initial pool set to 0, turn on the shrinking of the pool and set the frequency of narrowing to 20 seconds
-
Can not Conect to my Oracle database again!
I had a problem with my sandbox... I have reinstalled all server 2008r2. I have install the adapter back loop, then the oracle database 11 g 2
my Oracle Hyperion instance and my planning scheme is PLNAPP01 installed for essbase and planning.
but I get an error of e/s network adapter could not establish a connection.
I can open the oracle database, but hyperion does not connect
all ideas
Please notify
Published by: next on October 21, 2012 level 22:06Try this:
http://camerons-blog-for-Essbase-hackers.blogspot.com/2012/08/11122-is-here-with-twist.htmlAnd this part 1:
http://camerons-blog-for-Essbase-hackers.blogspot.com/2012/08/bringing-cloud-down-to-ground-and-no.htmlAnd this part 2:
http://camerons-blog-for-Essbase-hackers.blogspot.com/2012/08/bringing-cloud-down-to-ground-and-NO_28.htmlAnd the source:
http://metavero.com/2012/07/28/EPM-test-drive-deaux/Kind regards
Cameron Lackpour
-
Can not Conect to my Oracle database
I'm building a planning Hyperion Essbase and HFM Sandbox, I installed server 2008R2 as my OS and have an installation of Oracle 11 g 2 in my database.
I was able to create a USER PLANAPP01, Grant "RESOURCES PLNAPP01, GRANT 'Connect' to PLNAPP01 and Create View to PLANAPP01;" All grants were successful
but when I
When I go to start-> all programs-> Oracle - oraD11g_home1-> Database Control - Hyperion
The attempt of connection system = https://nextlevelserver:1158 / em-> continue on this website (not recommended). But I'm able to shoot to the top of the Oracle database
Please notifyMark this thread as answered here and re open
"Oracle Discussion forums' Business Intelligence Foundation" Essbase
-
Hello everyone, I have a problem with the database Panel.
I installed mySQL and apache and when I tried to conect dreamweaver CC datebase I couldn't found database sign in the window. (window > database).
How could I solve this problem?
Panel database and server behaviors have been removed from Dreamweaver CC because the code they use is obsolete.
If you really need them, you can install it as an extension, but they are no longer supported by Adobe. See: http://helpx.adobe.com/x-productkb/policy-pricing/dreamweaver-cc-server-extensions.html.
-
problems connecting to databases
Hi gurus,
I have a well documented problem but cannot be resolved by myself. I need a little help.
I have two databases in my laptop, the two 11.2.0.1 running in windows 7 (I know that it was not taken in charge yet, but this isn't the problem).
Now I want to double ORIGINAL copy of database with rman, but I'm having:
RMAN-04006: auxiliary database error: ORA-12505: TNS:listener is not currently of SID given in connect
The two databases are running and works well, I can connect in different windows:
so, I check the tnsnames:set ORACLE_SID=ORIGINAL sqlplus / as sysdba SQL*Plus: Release 11.2.0.1.0 Production on Jue Ago 2 11:02:47 2012 Copyright (c) 1982, 2010, Oracle. All rights reserved. Conectado a: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> select name from v$database; NAME --------- ORIGINAL in other window: set ORACLE_SID=COPY sqlplus / as sysdba SQL*Plus: Release 11.2.0.1.0 Production on Jue Ago 2 11:02:47 2012 Copyright (c) 1982, 2010, Oracle. All rights reserved. Conectado a: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> select name from v$database; NAME --------- COPY
Normal all the shows in order to check the listener services:# tnsnames.ora Network Configuration File: C:\Users\my_user\miBBDD\product\11.2.0\dbhome_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. COPY= (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = copy) ) ) ORIGINAL= (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORIGINAL) ) ) ORACLR_CONNECTION_DATA = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (CONNECT_DATA = (SID = CLRExtProc) (PRESENTATION = RO) ) ) LISTENER_COPY = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) LISTENER_ORIGINAL = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
Listener.oraC:\Users\my_user>lsnrctl services; LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 02-AGO-2012 11:30 :28 Copyright (c) 1991, 2010, Oracle. All rights reserved. Conectßndose a (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521))) Resumen de Servicios... El servicio "CLRExtProc" tiene 1 instancia(s). La instancia "CLRExtProc", con estado UNKNOWN, tiene 1 manejador(es) para este servicio... Manejador(es): "DEDICATED" establecido:0 rechazado:0 LOCAL SERVER El servicio "DDBBXDB" tiene 1 instancia(s). La instancia "original", con estado READY, tiene 1 manejador(es) para este servicio... Manejador(es): "D000" establecidos:0 rechazados:0 actuales:0 mßximo:1022 estado:ready DISPATCHER <machine: MY_USER, pid: 4356> (ADDRESS=(PROTOCOL=tcp)(HOST=MY_USER)(PORT=54428)) El servicio "original" tiene 1 instancia(s). La instancia "original", con estado READY, tiene 1 manejador(es) para este servicio... Manejador(es): "DEDICATED" establecido:0 rechazado:0 estado:ready LOCAL SERVER El comando ha terminado correctamente
and sqlnet.ora# listener.ora Network Configuration File: C:\Users\my_user\miBBDD\product\11.2.0\dbhome_1\network\admin\listener.ora # Generated by Oracle configuration tools. SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = CLRExtProc) (ORACLE_HOME = C:\Users\my_user\miBBDD\product\11.2.0\dbhome_1) (PROGRAM = extproc) (ENVS = "EXTPROC_DLLS=ONLY:C:\Users\my_user\miBBDD\product\11.2.0\dbhome_1\bin\oraclr11.dll") ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) ) ) ADR_BASE_LISTENER = C:\Users\my_user\miBBDD
I don't know why and how solve it, so any idea will be apreciated.# sqlnet.ora Network Configuration File: C:\Users\my_user\miBBDD\product\11.2.0\dbhome_1\network\admin\sqlnet.ora # Generated by Oracle configuration tools. # This file is actually generated by netca. But if customers choose to # install "Software Only", this file wont exist and without the native # authentication, they will not be able to connect to the database on NT. SQLNET.AUTHENTICATION_SERVICES= (NTS) NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Thank youGood to hear that :)
Please if you get your answer, mark this thread as a response. -
Solaris - Oracle10g - could not connect to the database via the application...
Dear people...
I am facing a problem trying to connect to the database via the application...
This was not the case previously, that something was wrong after the installation of the application.
During the installation of the Application, I had specified the database/SID as "wind".
The application works well up to 10 days, when there is power failure.
Resumption of food, I started the server Solaris (Sparx).
Then started to oracle and listener.
And when tried to start the application could not succeed.
An error in the application log file:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 error: 2: no such file or directory
Then follows things:
-------------------------------------------------------------------------------------------
$ su - pdmorcl1
Password:
Sun Microsystems Inc. SunOS 5.10 generic January 2005
bash $
bash-3. $00 sqlplus "virtue sysdba".
SQL * more: Release 10.2.0.1.0 - Production on Thu Oct 21 10:57:16 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connect to an instance is idle.
SQL > startup
ORACLE instance started.
Total System Global Area 1258291200 bytes
Size bytes 1978336 fixed
218107936 variable size bytes
1023410176 of database buffers bytes
Redo buffers 14794752 bytes
Mounted database.
Open database.
SQL > exit
Disconnected from the database to Oracle 10 g Enterprise Edition Release 10.2.0.1.0 - 64 bit Production
With partitioning, OLAP and Data Mining options
departure from lsnrctl bash-3. $ 00
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on October 21, 2010 10:59:02
Copyright (c) 1991, 2005, Oracle. All rights reserved.
From /d32/pdmorcl1/product/10.2.0/Db_1/bin/tnslsnr: Please wait...
TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
System settings file is /d32/pdmorcl1/product/10.2.0/Db_1/network/admin/listener.ora
Log messages written to /d32/pdmorcl1/product/10.2.0/Db_1/network/log/listener.log
Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1)))
Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ffnew.ffpl.com) (PORT = 1521)))
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))
STATUS of the LISTENER
------------------------
Alias LISTENER
For Solaris TNSLSNR version: Version 10.2.0.1.0 - Production
Start date October 21, 2010 10:59:02
Uptime 0 days 0 h 0 min 0 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /d32/pdmorcl1/product/10.2.0/Db_1/network/admin/listener.ora file
The listener log file /D32/pdmorcl1/product/10.2.0/Db_1/network/log/listener.log
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ffnew.ffpl.com) (PORT = 1521)))
Summary of services...
Service 'PLSExtProc' has 1 instance (s).
Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
"Wind" service has 1 instance (s).
Instance of "wind", status UNKNOWN, has 1 operation for this service...
The command completed successfully
bash-3. $00 pdm90/pdm90@wind
bash: pdm90/pdm90@wind: no such file or directory
bash-3. $00 sqlplus pdm90/pdm90@wind
SQL * more: Release 10.2.0.1.0 - Production on Thu Oct 21 10:59:51 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 error: 2: no such file or directory
Enter the user name: pdm90
Enter the password: pdm90
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64 bit Production
With partitioning, OLAP and Data Mining options
SQL >
--------------------------------------------------------------------------------
Now, I'm very new to the world of the Oracle...
I'm stuck here in the last 10 days...
Does someone can give solution to this problem...
Thanks in advance...
Kind regards
ManishHello
ORCL:/D32/orawc/product/10.2.0/Db_1:N
Oracl:/D32/orawind/product/10.2.0/Db_1:N
testwind:/D32/tstuser1/product/10.2.0/Db_1:N
pdmorcl1:/D32/pdmorcl1/product/10.2.0/Db_1:N
Wind:/D32/pdmorcl1/product/10.2.0/Db_1:NSo now, I think that problem is some hand if environment variable at startup of the database. oratab files sows that you have multiple homes of oracle on your server
1 /d32/orawc/product/10.2.0/Db_1
2 /d32/orawind/product/10.2.0/Db_1
3 /d32/tstuser1/product/10.2.0/Db_1
4 /d32/pdmorcl1/product/10.2.0/Db_1Your environment variable must be set correctly when you start the database so that it starts from the good House. Listener could run from any head of mission and your database can register automatically. For your particular case, you should and environment flow as follows and it should work for you
export ORACLE_HOME=/d32/pdmorcl1/product/10.2.0/Db_1 export ORACLE_SID=wind export PATH=$ORACLE_HOME/bin:$PATH
After setting your environment like that, now you conect 'as sysdba' and startup of the database (I think you know how to start the database. If it is already started, stopped and then start early). Now your database said the correct House
Now you pasted above your tnsnames.ora file. Should the tnsnames.ora file $$be to the following Director (in the current home you above)
/D32/pdmorcl1/product/10.2.0/Db_1/network/admin
Now you try to connect you wanted. To make sure everything, also stick out now in the course of execution of the command line
which tnsping which sqlplus which lsnrctl
Salman
-
Hello everyone.
My environment is as follows:
I have a few databases in different servers. and forms and reports services install in another,
My problem, I want the user to enter in a form and can choose what database, it wants to connect. (In fact an option, not giving the user/password@conectionname)
I have the tnsnames.ora with all the conection is tested and working properly.
Any ideas wellcome.
Say hello to everyone.
Thank you in advance for your interest.What version of forms and DB are you using?
You can do this in several ways
with Oracle 10 g you can connect clients to db without using Tnsnames.ora
CONNECT username/pwd@[/]host[:port][[service_name]]
CONNECT hr/hr@//atlas:1521/recipesbut I have not tested with forms
Another way is to
1 creating user in the database which only has connect privileges for example logtodb and a table
2. create the table with all of your references in there in logtoDb user DB
3. at the session of forms to connect by default to the user of the connection.
4. switch database session in FORMS using following codelogout; logon(username, pwd||'@'||alias);
It may be useful
-
Question on portal of the OAS and the DB conections
Hello
I get a lot of problems with the portal I created, sometimes my DB goes down
with this error:
so I have to but in decline in all services and then put them up once again, including the DB, so that everything works well again.-------------------------------------------------------------------------------------------------------------- Fallo de la llamada para ejecutar el origen de datos. [No se ha podido establecer la conexión. This line in english says something like: Fail calling to execute data. [ It was not possible to stablish the connection -------------------------------------------------------------------------------------------------------------- [Listener refused the connection with the following error: ORA-12519, TNS:no appropriate service handler found The Connection descriptor used by the client was: desarrollo06:1521:infra ]
I want to know:
-How many omniportlets or conections to the database can handle the OAS Portal?
-Is the firm of omniportlet the conection when he loaded information?
-Can there be a problem if I use many omniportlets (I mean if they close their conection?)?
- And if so, how can I fix it?
Thanks in advance,
aTTe:
BlumeHi Blume,
1. the number of handles of portal with your db connections is configured in the JDBC connection Pool settings.
2. don't think.
3. I think, Yes, some of them will be the expected behavior (for example, the number of connections limit is exceeded), and some of them are due to a few bugs (see answer 4.)
4. There are a few bugs related to this Portal 10.1.4 login problem.
for example, check this note on Metalink (Doc - ID: 394089.1) who says that:"OMNIPortlet uses connection from the connection pool object. JDBC The database is restarted, the cached connection is not valid and the exception has not been taken. »
To resolve this problem, you may need to apply a patch (hotfix 5393955) on your gate high. You can get it from Metalink.
5 btw, stop db not may need to recover/restore connections; try simply restarting OC4J_Portal on AS Command Console.
hope that helps!
AMN -
Database 8 had error ORA-12505 wit DBLINK to 10 g
Hello
I have a database of Oracle 8 Linux, I want to create a data link to an Oracle 10 g database, I wrote tnsnames entry ian like this
OSO.com =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST= 172.1.34.120) (PORT = 1521))
(CONNECT_DATA =
(SID = OSOL.com)
)
)
I also tried with this
OSO.com =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST= 172.1.34.120) (PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = OSO.com)
)
)
AND thereby
OSO =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST= 172.1.34.120) (PORT = 1521))
(CONNECT_DATA =
(SID = OSOL.com)
)
)
and when I tried to conect to sqlplus give me ORA-12505: TNS:listener could not resolve SID in connect descriptor, I try OSO tnsping works very well but don't sqlplus
Can U help me
Thank youhosoriol wrote:
Hello
I have a database of Oracle 8 Linux, I want to create a data link to an Oracle 10 g database, I wrote tnsnames entry ian like this
OSO.com =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST= 172.1.34.120) (PORT = 1521))
(CONNECT_DATA =
(SID = OSOL.com)
)
)I also tried with this
OSO.com =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST= 172.1.34.120) (PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = OSO.com)
)
)AND thereby
OSO =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST= 172.1.34.120) (PORT = 1521))
(CONNECT_DATA =
(SID = OSOL.com)
)
)
and when I tried to conect to sqlplus give me ORA-12505: TNS:listener could not resolve SID in connect descriptor, I try OSO tnsping works very well but don't sqlplus
Can U help me
Thank youTNSPING only shows that there is a listener on the specified host and port. He really doesn't know the status of any particular database.
What services are you see when you do a LSNRCTL STATUS on the machine to 172.1.34.120. That's what you have to choose when setting SERVICE_NAME in your tnsnames.ora file.
BTW, sid has really nothing to do with the areas, so specifying SID = OSOL.com was particularly striking to glitter! ;-)
-
Cannot delete the cookie "macworld.co.uk" (databases)
Hello
I tried to delete the cookie next to Safari 10.
It's "macworld.co.uk. It is not one "cache" as others, it is "databases"
Initially, I used El Capitan and now I use macOS Sierra 10.12.
These are the instructions, below, I used to try to remove the cookie. They work for everything but the cookie "macworld". The cookie is returned, no matter what.
Someone at - it ideas?
Thank you.
Mode:
1. clear the Cache
Safari > Preferences > advanced
Tick the box "Show develop menu in menu bar."
Develop menu will appear in the Safari menu bar.
Click on develop and select 'Empty cache' in the menu dropdown.
2 Delete Cookies
Safari > Preferences > privacy > Cookies and other data from the website:
Click on the button "Details". Delete the cookie.
Disable all extensions and test them.
Delete Caches.db.
First try step 1. If this does not help, try step 2.
1 Delete Caches.db
Close all windows and close all applications.
Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.
Select 'Library' in the menu dropdown.
Library > Caches > com.apple.Safari > Caches.db
Right-click on the Caches.db file and select "move to the trash.
Shut down windows and restart Safari.
2 remove the test and com.apple.Safari.plist file.
Empty the trash.
Quit all applications.
Hold down the option key and click on the "Go" menu in the Finder menu bar.
Select 'Library' in the menu dropdown.
Library > Preferences > com.apple.Safari.plist
Right-click on it and select "place it in the trash.
Turn it back on. Relaunch Safari and test.
If this does not help, "put back" the com.apple.Safari.plist
Right click on the trash icon in the Dock, then select 'open '.
Right-click on the com.apple.Safari.plist and select "Get Back".
You have this site as one of your top Sites.
-
updated to ios 10.0.1 and now when I run the conectivity test my pc can't find my iphone so I'm not able to back up or synchronize it with my pc. everytime I connect my phone to my PC the pc revealed the companion phone which is no use to me as I want to get back to the top of my IPhone and syncing old content like movies without having to use my wireless
You have restarted your computer?
If iTunes does not recognize your iPhone, iPad or iPod - https://support.apple.com/HT204095
Device are not not immediately after the upgrade - https://discussions.apple.com/thread/6573744 - try to restart
Make sure you use the original or a spare cord Apple. Some third-party cables transfer that power and no data signal.apple.com/message/28002758#28002758
https://discussions.apple.com/message/29154537#29154537 - removed then reinstalled iTunes application
July 2016 Lawrence_Finch post - https://discussions.apple.com/message/30402529#message30402529 - connection dirty?
-
Hello.
Apple has a database where the victims of theft could enter the serial number of the unit, so that a person who wants to buy a used device can check the serial number? My MacBook Pro was stolen 2 days in San Francisco, the Golden Gate Park.
Thank you
Marina
Maybe you are looking for
-
App note make random text in links
Random text (spontaneously) turned into links (see screenshot) in the Notes application. More info Sometimes I remove links (individually), but the other links will reappear later. Some good links (for example, turning a url into a link, turning a da
-
ENVY of HP TouchSmart 15-j053c: need Driver Audio for HP ENVY 15
While trying to solve the problem of automatic adjustment of the volume for my laptop, I accidentally deleted the sound card driver. I did a hard reset hoping it would fix itself, the IDT Codec appears in Device Manager, but it is not functional. Try
-
Installing the SP1 gives the Error 80070002
I have Windows Vista Business 32 All upgrades of Windows download and install well, with the exception of SP1. I tried Install from the Web site Download the file and then install Download and burn a disc, then the installation of the drive On each o
-
I have genuine windows vista edition installation integral over cracked edition windows Home premium
How can I install windows vista edition integral over cracked windows edition Home premium? What I ve to do a clean install and how it? Thanx
-
Select the frames on a switch vDistributed
HelloI'm looking to turn frames on my DVS. I did my whole life on a Standard switch and in this case must be activated on a per level vmkernel port.I have read the documentation on the DVS who says we can allow him to level DVS. The documentation als