Database query - 2147467259 ADO error: 0x80004005

So I'll have more database problems.  This I think is a bit simpler.  I have an Access database and in it, I have a table with several columns of data.  I want to get the maximum value for a column of this table.  One of my columns gives me a problem with this and I don't know why.  Here is my code:

You can see reading of voltage and power of work very well, but the current read attempt returns an error.  Research on the site of NOR, this error is used for many things and it is usually due to a problem of 32 or 64 bits, but in this case the reading has worked on two previous columns that are also an I32, but the third time, it is not.  It also fails immediately when you try running everything first, so it is likely that something with this column.  Is there something I can check?  I opened in Access and has been able to do a query with the Query Wizard to find the max current min.  The database he is over 1 GB so posted will be not possible.  Same size, it could be a problem.  Any suggestions?  Thank you.

If the current is a reserved word in Access?

Tags: NI Software

Similar Questions

  • Run database query error - help!

    I have a cfquery code that looks like this:

    < CFQUERY DATASOURCE = "MaBase" username = "myuser" PASSWORD = "MonMotpasse" NAME = "codelist" CACHEDWITHIN = "#CreateTimeSpan (0,1,0,0) #" >
    SELECT *.
    OF systemcode
    WHERE (((systemcode) TRIM) LEN = 2 OR LEN (TRIM (systemcode)) = 4)
    < CFSWITCH EXPRESSION = "#CAT #" >
    < CFCASE VALUE = "1" > (MID (systemcode, 1, 2) BETWEEN ' 01 'AND ' 05') AND < / CFCASE >
    < CFCASE VALUE = "2" > AND (MID(systemcode,1,2) BETWEEN ' 06 "AND 15") < / CFCASE >
    < CFCASE VALUE = "3" > AND (MID (systemcode, 1, 2) FROM 16 'TO 24') < / CFCASE >
    < CFCASE VALUE = "4" > AND (MID (systemcode, 1, 2) BETWEEN 25 'AND 27') < / CFCASE >
    < CFCASE VALUE = "5" > (MID (systemcode, 1, 2) FROM 28 "TO 38") AND < / CFCASE >
    < CFCASE VALUE = "6" > AND (MID (systemcode, 1, 2) BETWEEN 39 'AND 40') < / CFCASE >
    < CFCASE VALUE = "7" > (MID (systemcode, 1, 2) 41 "TO 43") AND < / CFCASE >
    < CFCASE VALUE = "8" > AND (MID (systemcode, 1, 2) WITH 44' 49') < / CFCASE >
    < CFCASE VALUE = "9" > (MID (systemcode, 1, 2) FROM 50 "TO 63") AND < / CFCASE >
    < CFCASE VALUE = "10" > AND (MID (systemcode, 1, 2) FROM 64 "TO 67") < / CFCASE >
    < CFCASE VALUE = "11" > AND (MID (systemcode, 1, 2) BETWEEN 68 "AND 71") < / CFCASE >
    < CFCASE VALUE = "12" > AND (MID (systemcode, 1, 2) BETWEEN 72 'AND 83') < / CFCASE >
    < CFCASE VALUE = '13' > AND (MID (systemcode, 1, 2) WITH 84' 85') < / CFCASE >
    < CFCASE VALUE '14' = > (MID (systemcode, 1, 2) BETWEEN 86 'AND 89') AND < / CFCASE >
    < CFCASE VALUE = "15" > AND (MID (systemcode, 1, 2) 90 '-97') < / CFCASE >
    < CFCASE VALUE = "16" > (MID (systemcode, 1, 2) BETWEEN 98 "AND 99") AND < / CFCASE >
    < CFDEFAULTCASE > < CFLOCATION URL = "somewhere.htm" > < / CFDEFAULTCASE >
    < / CFSWITCH >
    ORDER BY systemcode
    < / CFQUERY >

    It works perfectly in CF 5.  However, when running in CF 8 I get the error message:

    Error running Query.FUNCTION of database mydatabase. LEN does not exist the specific sequence of files included or processed is: home/httpd/vhosts/somedomain.com/httpdocs/reference/systemcode.cfm, line: 24

    (which refers to the cfquery above)

    "mydatabase" is the name of the database and LEN is a function.    It checks the length of systemcode to 2 or 4, if they are then check if the value of #CAT # is 1 and the 2 first characters from 01 to 05, then select the line.  I don't know what's wrong with CF5 but CF8?  It's driving me crazy.  Any help is appreciated.

    I don't see why

    all of a sudden it does not work with CF8 and MySQL,

    If you changed databases, which is the source of the problem, do not upgrade CF.  MySQL won't understand specific features of MS Access and vice versa. Don't expect applications written for type of databases operate automatically with another.  Although there are sql standards, each database is different. It is quite common for database providers have names completely different functions, the types of data and same syntax. You'll need for any check your database queries and convert all specific syntax of access, data types, etc. for the MySQL equivalents.

    Is there the equivalent MySQL for these two functions (TRIM and)

    LEN)?

    Yes. See the string functions section in the mySQL online documentation.

    http://dev.MySQL.com/doc/refman/5.0/en/string-functions.html

    I don't know that he had a PLATE and LEN in MS Access

    database.  I guess I mixed them.

    Yes. It's a little confusing because CF and MS Access have these functions.  In this case, you use access functions, not of CF.

    http://www.techonthenet.com/access/functions/index_alpha.php

    > Yes, I put a

    CFLOCATION inside the cfquery.  Never meet that

    scenario, so I did not know if it works.

    Well, if you use code, it should be something that you tested. So, you know how it behaves. But CFLOCATION really does not belong inside a database query.

    `

  • Run database query error; Help, please

    I had trouble getting this recording to publish on my DB, I have the same shape, put in place to modify an existing record, as well as the addition of a new record. I have 2 errors, can someone help me see what I'm doing wrong? I write the code that I have a problem with and two errors. I'm sorry, this is probably simple. But I looked at this code too long and miss me the problem.

    Code:
    < cfelseif ParameterExists (Form.btnEdit_OK) >

    < ParameterExists (Form.RecordID) cfif >
    < cfset eDate = DateFormat (form.eventDate, "mm/dd/yyyy") >
    "< cfquery datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "dbtype ="ODBC">"
    UPDATE SEEevents
    SET SEEevents.display =' #form.display #', SEEevents.title =' #form.title #', SEEevents.eventDate ='#eDate #', SEEevents.eventTime =' #form.eventTime #', SEEevents.location =' #form.location #', SEEevents.contact =' #form.contact #', SEEevents.phone =' #form.phone #', SEEevents.fax =' #form.fax #', SEEevents.email =' #form.email #', SEEevents.URL ='#form. URL #', SEEevents.sponsor =' #form.sponsor #', SEEevents.Body ='#form. "PDSeditor #
    WHERE RecordID = #form. RecordID #.
    < / cfquery >
    < cflocation url = "events_RecordView.cfm? RecordID = #Form.RecordID # ">"
    < cfelse >
    < cfset eDate = DateFormat (form.eventDate, "mm/dd/yyyy") >
    "< cfquery datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "dbtype ="ODBC">"
    INSERT INTO SEEevents (display, title, eventDate, eventTime, location, contact, telephone, fax, email, URL, sponsor, body)
    VALUES (' #form.display # "," #form.title # "," # #eDate # "," #form.eventTime # "," #form.location # "," #form.contact # "," #form.phone # "," #form.fax # "," #form.email # ', ' #form.) URL #', ' #form.sponsor # ', ' #form. PDSeditor #')
    < / cfquery >
    < cflocation url = "events_RecordView.cfm? RecordID = #GetNewRecord.ID_Field # ">"
    < / cfif >

    Here are the two errors:
    error when editing an existing record:

    Run database query error.
    [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver] Too few parameters. 1 expected.

    The error occurred in C:\websites\108392zj7\admin\events_RecordAction.cfm: line 70

    68: < cfif ParameterExists (Form.RecordID) >
    69: < cfset eDate = DateFormat (form.eventDate, "mm/dd/yyyy") >
    "70: < cfquery datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "dbtype ="ODBC">"
    71: UPDATE SEEevents
    72: SET SEEevents.display =' #form.display #', SEEevents.title =' #form.title #', SEEevents.eventDate ='#eDate #', SEEevents.eventTime =' #form.eventTime #', SEEevents.location =' #form.location #', SEEevents.contact =' #form.contact #', SEEevents.phone =' #form.phone #', SEEevents.fax =' #form.fax #', SEEevents.email =' #form.email #', SEEevents.URL ='#form. URL #', SEEevents.sponsor =' #form.sponsor #', SEEevents.Body ='#form. "PDSeditor #



    --------------------------------------------------------------------------------

    SQL UPDATE SEEevents SET SEEevents.display = '0', SEEevents.title = 'VIP dinner', SEEevents.eventDate='04/13/2007', SEEevents.eventTime =' 8:30 pm - 23:00 ', SEEevents.location = 'person Restaurant', SEEevents.contact = 'person', SEEevents.phone ='(000) 000.6262', SEEevents.fax = ", SEEevents.email ="[email protected]", SEEevents.URL =' http://www.person.com', SEEevents.sponsor =", SEEevents.Body =' < font size = "2" face = "Verdana, Arial, Helvetica, sans serif" > < strong > Notes: facilities > bookings must be confirmed with a great Cardinal < br > < strong credit > price : < Facilities > Advance: $125. per person (including drinks and tips) at the door: $150. per person, < i > Limited places available < /i > < / police > ' WHERE RecordID = 13
    DATASOURCE ETUCE
    VENDORERRORCODE-3010
    SQLSTATE 07002

    This is the error when publishing a new record:

    Run database query error.
    [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver] Type mismatch of data in the expression of the criteria.

    The error occurred in C:\websites\108392zj7\admin\events_RecordAction.cfm: line 78

    76: < cfelse >
    77: < cfset eDate = DateFormat (form.eventDate, "mm/dd/yyyy") >
    "78: < cfquery datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "dbtype ="ODBC">"
    79: INSERT IN SEEevents (display, title, eventDate, eventTime, location, contact, telephone, fax, email, URL, sponsor, body)
    80: VALUES ("#form.display #", "#form.title #", "# #eDate #", "#form.eventTime #", "#form.location #", "#form.contact #", "#form.phone #", "#form.fax #", "#form.email # ', ' #form.) URL #', ' #form.sponsor # ', ' #form. PDSeditor #')



    --------------------------------------------------------------------------------

    SQL INSERT INTO SEEevents (display, title, eventDate, eventTime, location, contact, telephone, fax, email, URL, sponsor, body) VALUES ('0 ', 'test', ' # #03/25/2007 ", 12:47 ', 'Home', 'CJD', '' 000-000-0000,", '[email protected]', 'www.saratogaexpo.com', ' ', ' ')
    DATASOURCE ETUCE
    VENDORERRORCODE-3030
    SQLSTATE 22018

    Can someone help me tweek this code? I see double at this stage. Thank you.

    Phoenix

    I thought about it. It's a java tag used by my editor throwing the error in the backup / update of the function.

    Thanks a lot for all the help everyone!
    If I can ever help anyone in any way, feel free to ask.

  • Inconsistent database query error

    I get an error for a simple display query. I use MS Access and CF8. The error is as follows:-

    Run database query error.
    ''

    And to clarify that two single quotes.

    The query I use is as follows: -.

    SELECT *.
    OF tbl_positionRequest
    WHERE position = ' #URL. Position #'
    ORDER BY Position CAD

    He said that the error occurs in the line WHERE.
    The variable is passed correctly, I the debugged in the origin and home page. The funny this is that the output in the debug information is correct when I run it in access and the same query works for another data base (with different domain names).

    In CF Admin I use access Unicode driver and I think that might be the problem.

    Any help would be appreciated.
    See you soon
    David

    Run the query with just the select and from clauses. Do not display the data, just look at the recordcount. I guess a word reserved with position problem.

  • another error executing database query.

    I get this error.
    12:40:54.054 - database Exception: in C:\CFusionMX7\wwwroot\Author\dropdown2\EmployeeAddAction.cfm: line 26
    Run database query error.

    I added additional fields in the mdb and added extra code to the page of the form and action page.
    I still get this error.
    That's how I broke it down.

    If I run my 2 files EmployeeAddForm.cfm and EmployeeAddAction.cfm
    I get this error:


    NOTE: if I take the code comments and ignore the new fields added to the DB it works fine!

    The web site, you access has met an unexpected error.
    Please contact the site administrator.

    The following information is for the creation of Web sites for debugging purposes.

    Error occurred while processing request
    Run database query error.
    [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver] Syntax error in INSERT INTO statement.


    Resources:
    Enable robust Exception information to provide more details about the source of errors. In the administrator, click debugging & logging > debugging settings and select the robust exception information option.
    See the ColdFusion documentation to verify that you are using the correct syntax.
    Search the Knowledge Base to find a solution to your problem.


    Browser Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
    Remote address 127.0.0.1
    Reference http://127.0.0.1:8500/Author/dropdown2/EmployeeAddForm.cfm
    Time June 6 07 12:40

    NOTE: if I take the code comments and ignore the new fields added to the DB it works fine!

    I get this error.
    12:40:54.054 - database Exception: in C:\CFusionMX7\wwwroot\Author\dropdown2\EmployeeAddAction.cfm: line 26
    Run database query error.

    I added additional fields in the mdb and added extra code to the page of the form and action page.
    I still get this error.
    That's how I broke it down.

    If I run my 2 files EmployeeAddForm.cfm and EmployeeAddAction.cfm
    I get this error:

    NOTE: if I take the code comments and ignore the new fields added to the DB it works fine!

    The web site, you access has met an unexpected error.
    Please contact the site administrator.

    The following information is for the creation of Web sites for debugging purposes.

    Error occurred while processing request
    Run database query error.
    [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver] Syntax error in INSERT INTO statement.

    Resources:
    Enable robust Exception information to provide more details about the source of errors. In the administrator, click debugging & logging > debugging settings and select the robust exception information option.
    See the ColdFusion documentation to verify that you are using the correct syntax.
    Search the Knowledge Base to find a solution to your problem.

    Browser Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
    Remote address 127.0.0.1
    Reference http://127.0.0.1:8500/Author/dropdown2/EmployeeAddForm.cfm
    Time June 6 07 12:40

    NOTE: if I take the code comments and ignore the new fields added to the DB it works fine!

  • Database Query, network problem runtime error

    I get the following error message when you try to run an Oracle stored procedure that returns a Ref with CF MX 7.0.2.142559 cursor:
    Run database query error.
    [Macromedia] [SequeLink JDBC Driver] Network problem, session aborted due to an error internal in the remote procedure call, the connection closed.

    I connect to the database through ODBC Socket DSN. The CF DSN has been created without error. I checked the ODBC DSN to connect without error.

    I get the following in the application log:
    "Mistake'," jrpp-0 "," 11/09/08 "," 11:25:31 "", "Surplus", "database Query runtime error." [Macromedia] [SequeLink JDBC Driver] Network problem, session aborted due to an error internal in the remote procedure call, the connection closed. «The specific sequence of files included or processed is: C:\Inetpub\wwwroot\assocproducts\ken.cfm, line: 14»

    I get the following in the log of the exception:
    "Mistake'," jrpp-0 "," 11/09/08 "," 11:25:31 "", "Surplus", "database Query runtime error." [Macromedia] [SequeLink JDBC Driver] Network problem, session aborted due to an error internal in the remote procedure call, the connection closed. «The specific sequence of files included or processed is: C:\Inetpub\wwwroot\assocproducts\ken.cfm, line: 14»
    coldfusion.tagext.sql.QueryTag$ DatabaseQueryException: error running query database.
    at coldfusion.tagext.sql.StoredProcTag.doEndTag(StoredProcTag.java:201)
    to cfCategory_Procs2ecfc417114750$ funcGETCATEGORYLIST.runFunction (C:\Inetpub\wwwroot\assocpr oducts\includes\Category_Procs.cfc:14)
    at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:344)
    at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47)
    to coldfusion.runtime.UDFMethod$ ReturnTypeFilter.invoke (UDFMethod.java:290)
    to coldfusion.runtime.UDFMethod$ ArgumentCollectionFilter.invoke (UDFMethod.java:254)
    at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:56)
    at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:207)
    at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:169)
    at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:1807)
    to cfken2ecfm1820770350.runPage(C:\Inetpub\wwwroot\assocproducts\ken.cfm:14)
    at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
    at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349)
    at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
    at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:225)
    at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51)
    at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
    at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)
    at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
    at coldfusion.filter.ClientScopePersistenceFilter.invoke (ClientScopePersistenceFilter.java:2 8)
    at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
    at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
    at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115)
    to coldfusion. CfmServlet.service (CfmServlet.java:107)
    at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
    at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
    at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
    at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
    to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:318)
    to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:426)
    to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:264)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

    I can't find anything on the net that helps me to solve this problem. I tried to use the Oracle JDBC driver as well, but got cryptic errors with that as well.

    Any help on this appreciated.

    Thank you!
    Ken

    I found the solution to my problem. I updated my drivers JDBC ( new drivers) and used the dedicated Oracle CF DSN and everything works fine.

  • Helps air: Error executing database query

    I get the message 'Error executing database query' whenever I click on the 'Préférences' button in the help air (if model Classic or cross-tab Malaccaaccordian). I can reject the message and the Preferences dialog box is displayed, but while the content tab seems to work the comments tab seems to be ignored.

    I get the same message when I try to add a comment to a topic.

    Any ideas?

    EDIT: I should mention that I'm on Vista Home Premium.

    UPDATE: seems to only affect projects upgraded X 5; the native projects v7 are have (so far).

    No worries. I need this only for demo AIR help anyway - so the project used native v7 exclusively.

  • Run database query, invalid use of the:

    I have a tutorial of ColdfusionMX problem when I get to add tags on the top of the code view. And I write the same thing as the tutorial.
    I get an error message that says:
    Query execution error database.
    error occurred during the processing of the application.
    Invalid use of ',' () in a query expression

    I need help desperately,
    Geordeslys,

    The web site, you access has met an unexpected error.
    Please contact the site administrator.

    The following information is for the creation of Web sites for debugging purposes.

    Error occurred while processing request
    Run database query error.
    Invalid use of '. «, » !', ou « () ». in a query expression ' ARTISTS. ARTISTID = ART. ARTISTID AND ART. MEDIAID = MEDIA. MEDIAID.

    The error occurred in C:\CFusionMX7\wwwroot\CFIDE\gettingstarted\tutorial\TMPhy0vtntf3u.cfm: line 1

    1:
    2: SELECT FIRSTNAME, LASTNAME, ARTNAME, DESCRIPTION, PRICE, LARGEIMAGE, ISSOLD, MEDIATYPE
    3: ART, ARTISTS, MEDIA

    --------------------------------------------------------------------------------
    Dear CF_dev2,

    Is that what you mean by full CF code?

    Georgeslys,
    SQL SELECT FIRSTNAME, LASTNAME, ARTNAME, DESCRIPTION, PRICE, LARGEIMAGE, ISSOLD, MEDIATYPE OF ARTISTS, ART, MEDIA WHERE ARTISTS. ARTISTID = ART. ARTISTID AND ART. MEDIAID = MEDIA. MEDIAID
    Cftutorial DATA source
    VENDORERRORCODE 3092
    SQLSTATE

    Resources:
    See the ColdFusion documentation to verify that you are using the correct syntax.
    Search the Knowledge Base to find a solution to your problem.

    Browser Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.0.3705; .NET CLR 1.1.4322;. PC Media Center 4.0; IEMB3; IEMB3)
    Remote address 127.0.0.1
    Referrer
    Date/time 03-Sep-07 19:11

    Stack trace (click to enlarge)
    at cfTMPhy0vtntf3u2ecfm1461475070.runPage (C:\CFusionMX7\wwwroot\CFIDE\gettingstarted\tutoria l\TMPhy0vtntf3u.cfm:1) at cfTMPhy0vtntf3u2ecfm1461475070.runPage (C:\CFusionMX7\wwwroot\CFIDE\gettingstarted\tutoria l\TMPhy0vtntf3u.cfm:1)

    com.inzoom.adojni.ComException: invalid use of '. «, » !', ou « () ». in a query expression ' ARTISTS. ARTISTID = ART. ARTISTID
    AND ART. MEDIAID = MEDIA. MEDIAID. in the Microsoft JET Database Engine = 3092 code Type = 1
    at com.inzoom.ado.Command.jniExecute (Native Method)
    at com.inzoom.ado.Command.execute(Command.java:40)
    at com.inzoom.jdbcado.Statement.exec(Statement.java:34)
    at com.inzoom.jdbcado.Statement.execute(Statement.java:107)
    at coldfusion.server.j2ee.sql.JRunStatement.execute(JRunStatement.java:212)
    at coldfusion.sql.Executive.executeQuery(Executive.java:753)
    at coldfusion.sql.Executive.executeQuery(Executive.java:675)
    at coldfusion.sql.Executive.executeQuery(Executive.java:636)
    at coldfusion.sql.SqlImpl.execute(SqlImpl.java:236)
    at coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:500)
    at cfTMPhy0vtntf3u2ecfm1461475070.runPage (C:\CFusionMX7\wwwroot\CFIDE\gettingstarted\tutoria l\TMPhy0vtntf3u.cfm:1)
    at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
    at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349)
    at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
    at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:225)
    at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51)
    at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
    at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)
    at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
    at coldfusion.filter.ClientScopePersistenceFilter.invoke (ClientScopePersistenceFilter.java:2 8)
    at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
    at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
    at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115)
    to coldfusion. CfmServlet.service (CfmServlet.java:107)
    at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
    at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
    at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
    at jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
    to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:318)
    to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:426)
    to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:264)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

  • ADO error: 0x80040E57 string or binary truncated (error-2147217833)

    I have a little disconcerting mystery when you try to insert the record in a SQL Server 2005 database.

    The full error message is:

    2147217833 error occurred at NI_Database_API.lvlib:Cmd Execute.vi-> NI_Database_API.lvlibData.vi B tools insert-> Ansur Database insert.vi-> insert data into dummy database.vi

    Possible reasons:
    ADO error: 0x80040E57
    Exception occurred in the Microsoft OLE DB for SQL Server provider: string or binary would be truncated. in create a NI_Database_API.lvlib:Rec - Command.vi-> NI_Database_API.lvlib:Cmd Execute.vi-> NI_Database_API.lvlibData.vi B tools insert-> Ansur Database insert.vi-> insert data into dummy database.vi

    I highlighted the part of the message which seems very strange.  Basically I am insert some simple strings and the contents of a file XML (attached) which is stored in a column of varchar (max).  The error message seems to suggest that the XML file is too long, but this cannot be because:

    (a) the varchar data type (max) can contain huge amounts of characters 2 ^ 32-1 (I think) and the file is long only 121 KB.

    (b) I have already inserted successfully several similar XML files which are even greater in size.

    All I can think is that something in the file itself is causing an error, but I do not understand why, given that the content of the file should just be treated as characters when you insert in the database column - everybody has ideas?

    Chris.

    P.S. I also tried without operations and it made no difference.

    Yay! -Solve the problem.  It turns out that one of the XML tags was not a space and so rather than return the abbreviated name of technicians (eg. FAN) it returns the full name (for example. FAN - Fabio Conta) - and what is the problem you ask?  Well, I defined the technicians name column in the database to be char (5) - that's why I got the ADO error "string or binary truncated data" when it went beyond the limit of five characters - all makes sense now.

    I can give myself a few laurels?

    Chris.

  • ID of Windows Live Mail error: 0x80004005

    Salvation; I have to change the Outlook to WLM, but when a try to configure my email account (* address email is removed from the privacy *) appears the trace message:

    ------------------------------------------------------------------------------------------------------------

    No to pueden enviar or receive messages from the cuenta xxxx xxx t. (NSK - LA). Error unknown.

    Server: 'mail.nsk - Box-Office'
    ID of Windows Live Mail error: 0x80004005
    Protocol: POP3
    Puerto: 110
    Security (SSL): No.

    ------------------------------------------------------------------------------------------------------------

    I have my computer was installing Kaspersky 2011, that someone has an answer to this problem?

    Thank you!!

    Hi Diego,.

    For a more specialized on issue of Windows Live Mail help, post your query on the Windows Live Forum.

    In the Windows Live Forum
    http://windowslivehelp.com/solutions.aspx?CategoryID=67fc5df1-ae24-408e-a5d4-56f1b70930a0

  • How to create a ViewObject attribute where value to get database query

    Hi Expert,

    I have a case for the value of database query. How to create the view additional attribute object where the value get database query?

    parameter binding of attributeId object in view I can do this in ADF with JDeveloper 11.1.1.6.

    Thank you

    Kind regards

    Wade W

    My problem is solved, maybe it's a bug in the JDeveloper 11.1.1.6.0

    I've got error (oracle.jbo.expr.JIEvalException) Houston-25077: name amount not found in the given object: oracle.jbo.server.ViewRowSetImpl@8690e3.

    When I develop by tab Overview (presentation of the business components). It is so strange, because I have an another transient viewAttribute that refer to another object in view and not get an error message like this before I create viewAttribute HeaderAmount.

    Maybe its ridiculous appearance, but when I go to View (lineVO.xml) object and tab to the source xml file, I have edited here. like to write

    <>

    Name = "HeaderAmount".

    IsUpdateable = "false".

    IsSelected = "false".

    IsPersistent = "false".

    PrecisionRule = 'true '.

    Type = "Oracle.jbo.domain.Number"

    ColumnType = 'NUMBER '.

    AliasName = 'VIEW_ATTR. '

    SQLType = 'DIGITAL' >

    <>

    Value = "ActivityHeaderId" / >

    and make sure this xml file are:

    <>

    Name = "ActHeaderView1VO".

    ViewLink = 'model. ActHeaderLineLink ".

    Type = "Oracle.jbo.Row"

    Reversed = 'true '.

    IsUpdateable = "false" / >

    When I try to re-run the application model and it's work...

    Thanks for your help. really appreciate

  • Using NVL in the query in the query resulting in error

    I always use CF8 and Oracle 11 G back.

    When I use NVL in the query in the query, I got error... I can't use NVL to check the value null? Help, please

    Here are my codes:

    < name cfquery = "GetC2" datasource = "#Trim (application." OracDSN) #">"

    SELECT CamID2, rel2_2, p_ln2, p_fn2, ins, l_year

    OF prt_temp

    WHERE Ins = 'CC '.

    AND l_year = '1481'

    AND NVL (Child_LN2,' ') <>' '
    AND NVL (Child_FN2,' ') <>' '

    < / cfquery >

    < cfif GetC2.Recordcount NEQ 0 >
    < cfquery name = "CheckRel2C2", dbtype = "QUERY" >
    SELECT CamID2, rel2_2
    OF GetC2
    WHERE NVL (Rel2_2,' ') <>' '
    AND NVL (p_ln2,' ') = ' '
    AND NVL (p_fn2,' ') = ' '
    AND Ins = 'CC '.
    AND l_year = '1481'
    < / cfquery >

    < / cfif >

    The error:

    Run database query error.

    Query of queries syntax error.

    Met «NVL (Rel2_2.» Incorrect conditional expression, waiting for an a [as | null | between | in | comparison] condition,.

    NVL is an Oracle function and it is not available in ColdFusion query of query.  If you try to check the values null, use IS NULL or IS NOT NULL.  Then

    WHERE NVL (Rel2_2,' ') <> ' '

    AND NVL (p_ln2,' ') = ' '

    AND NVL (p_fn2,' ') = ' '

    becomes

    WHERE Rel2_2 IS NOT NULL

    AND p_ln2 IS NULL

    AND p_fn2 IS NULL

    -Carl V.

  • Microsoft FixIt fails with the error 0x80004005 when run in the Standard user login

    Microsoft recommends running in a Standard user login.  However, the FixIt will not work in a Standard user login, even if started with "Run as Administrator".  It comes up with an empty window of FixIt if started without "Run as Administrator".  If started with 'Run as Administrator', it fails with the error: 0x80004005.  Don't miss this way 'by design', given that Microsoft must often State?

    Thank you

    el_abuelo

    Hello El_Abuelo,

    I went to the site you have included but the beta for Windows 7 users is full and I can't test what you are experiencing. They give you a site to give feedback on the beta product? If so, then please send a mail telling them of your question. If you already have a fix Center account, please log in to access your account on the site of difficulty It Center.

    If they don't give you a place for your comments, you can use the General Windows 7 comments page and don't forget to clarify that it is the Fix It center beta product for which you give your comments. Clickhere for a link to the forum Windows 7 comments.

    Thank you for making the point about your problem.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Problems installing drivers for printer EPSON L110. Error message "Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.»

    Original title: trouble installing the drivers for my printer.

    Hello

    I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.

    Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.

    I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.

    TKS

    Gerard

    Hi, Germain,.

    This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.

    http://www.Epson.co.in/epson_india/ink_tank_system_printers/product.page?product_name=Epson_L110&tab_index=4

    See the articles for more information.

    Install a printer

    Find and install printer drivers in Windows 7

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Database exception Houston - 28010:Error while getting the value of the following sequence for database PS_TXN_seq

    Hello

    I use jdev 11.1.1.6.0 version.

    We build webcenter portal application for which Portal Server is on one computer/server and database server is located on a different machine/server.

    It worked well, but the error pulled is

    Database exception Houston - 28010:Error while getting the value of the following sequence for database PS_TXN_seq

    What is the cause of this issue.

    [2013-08 - 03T 19: 55:09.566 + 08:00] [WC_Portal1] [WARNING] [] [oracle.jbo.server.ApplicationModuleImpl] [tid: [ASSETS].] [' ExecuteThread: ' 249 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [username: anonymous] [ecid: 004skazFMpJAdLEuN4aeLQ0002OP0000pS, 0:1] [APP: App_application1 #V2.0] [URI: / App/faces/AfLiteratureMenu/AfDocRefProductInstructions] []

    oracle.jbo.PCollException: Houston-28010: error getting next sequence value for the database PS_TXN_seq

    at oracle.jbo.PCollException.throwException(PCollException.java:36)

    at oracle.jbo.pcoll.OraclePersistManager.queryNextCollectionId(OraclePersistManager.java:1503)

    at oracle.jbo.pcoll.PCollManager.register(PCollManager.java:562)

    to oracle.jbo.pcoll.PCollection. < init > (PCollection.java:99)

    at oracle.jbo.pcoll.PCollManager.createCollection(PCollManager.java:461)

    at oracle.jbo.server.DBSerializer.setup(DBSerializer.java:153)

    at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:286)

    at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:267)

    at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:6026)

    at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:5877)

    at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:386)

    at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:9084)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4607)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.manageReferencingState(ApplicationPoolImpl.java:1493)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.finalizeResource(ApplicationPoolImpl.java:1393)

    at oracle.jbo.pool.ResourcePool.removeResourceInternal(ResourcePool.java:848)

    at oracle.jbo.pool.ResourcePool.setState(ResourcePool.java:1103)

    at oracle.jbo.pool.ResourcePool.removeResource(ResourcePool.java:860)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.removeDeadInstance(ApplicationPoolImpl.java:2736)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4638)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.manageReferencingState(ApplicationPoolImpl.java:1493)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.recycleReferencedInstance(ApplicationPoolImpl.java:2623)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2444)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2347)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3246)

    at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:572)

    at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:234)

    at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:505)

    at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:500)

    at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:523)

    at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:869)

    at oracle.adf.model.binding.DCDataControl.setErrorHandler(DCDataControl.java:484)

    at oracle.jbo.uicli.binding.JUApplication.setErrorHandler(JUApplication.java:261)

    at oracle.adf.model.BindingContext.put(BindingContext.java:1340)

    at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:174)

    at oracle.adf.model.BindingContext.instantiateDataControl(BindingContext.java:1056)

    at oracle.adf.model.dcframe.DataControlFrameImpl.doFindDataControl(DataControlFrameImpl.java:1566)

    at oracle.adf.model.dcframe.DataControlFrameImpl.internalFindDataControl(DataControlFrameImpl.java:1438)

    at oracle.adf.model.dcframe.DataControlFrameImpl.findDataControl(DataControlFrameImpl.java:1398)

    at oracle.adf.model.BindingContext.internalFindDataControl(BindingContext.java:1189)

    at oracle.adf.model.BindingContext.get(BindingContext.java:1139)

    at oracle.adf.model.binding.DCParameter.evaluateValue(DCParameter.java:82)

    at oracle.adf.model.binding.DCParameter.getValue(DCParameter.java:111)

    at oracle.adf.model.binding.DCBindingContainer.getChildByName(DCBindingContainer.java:2713)

    at oracle.adf.model.binding.DCBindingContainer.internalGet(DCBindingContainer.java:2761)

    at oracle.adf.model.binding.DCExecutableBinding.get(DCExecutableBinding.java:115)

    at oracle.adf.model.binding.DCUtil.findSpelObject(DCUtil.java:304)

    at oracle.adf.model.binding.DCBindingContainer.evaluateParameterWithElCheck(DCBindingContainer.java:1458)

    at oracle.adf.model.binding.DCBindingContainer.findDataControl(DCBindingContainer.java:1588)

    at oracle.adf.model.binding.DCIteratorBinding.initDataControl(DCIteratorBinding.java:2472)

    at oracle.adf.model.binding.DCIteratorBinding.getDataControl(DCIteratorBinding.java:2416)

    at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3069)

    at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)

    at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3195)

    at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)

    at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:115)

    at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareModel(FacesPageLifecycle.java:359)

    to oracle.adf.controller.v2.lifecycle.Lifecycle$ 2.execute(Lifecycle.java:137)

    at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:197)

    to oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$ 400 (ADFPhaseListener.java:23)

    to oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$ PhaseInvokerImpl.startPageLifecycle (ADFPhaseListener.java:238)

    to oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$ 1.after(ADFPhaseListener.java:274)

    at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:75)

    at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)

    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:472)

    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)

    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)

    to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at alfaaesar.portal.pages.filter.AnonymousSessionFilter.doFilter(AnonymousSessionFilter.java:47)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:32)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.webcenter.framework.events.dispatcher.EventDispatcherFilter.doFilter(EventDispatcherFilter.java:44)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.wcps.client.PersonalizationFilter.doFilter(PersonalizationFilter.java:75)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.webcenter.content.integration.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:168)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.webcenter.lifecycle.filter.LifecycleLockFilter.doFilter(LifecycleLockFilter.java:151)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)

    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)

    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: java.sql.SQLRecoverableException: Connection closed

    at oracle.jdbc.driver.PhysicalConnection.createStatement(PhysicalConnection.java:4070)

    at oracle.jdbc.driver.PhysicalConnection.createStatement(PhysicalConnection.java:4008)

    at oracle.jdbc.OracleConnectionWrapper.createStatement(OracleConnectionWrapper.java:112)

    at weblogic.jdbc.wrapper.XAConnection.createStatement(XAConnection.java:623)

    at weblogic.jdbc.wrapper.Connection.createStatement(Connection.java:500)

    at oracle.jbo.pcoll.OraclePersistManager.queryNextCollectionId(OraclePersistManager.java:1459)

    ... more than 114

    # # 0 in detail

    java.sql.SQLRecoverableException: closing connection

    at oracle.jdbc.driver.PhysicalConnection.createStatement(PhysicalConnection.java:4070)

    at oracle.jdbc.driver.PhysicalConnection.createStatement(PhysicalConnection.java:4008)

    at oracle.jdbc.OracleConnectionWrapper.createStatement(OracleConnectionWrapper.java:112)

    at weblogic.jdbc.wrapper.XAConnection.createStatement(XAConnection.java:623)

    at weblogic.jdbc.wrapper.Connection.createStatement(Connection.java:500)

    at oracle.jbo.pcoll.OraclePersistManager.queryNextCollectionId(OraclePersistManager.java:1459)

    at oracle.jbo.pcoll.PCollManager.register(PCollManager.java:562)

    to oracle.jbo.pcoll.PCollection. < init > (PCollection.java:99)

    at oracle.jbo.pcoll.PCollManager.createCollection(PCollManager.java:461)

    at oracle.jbo.server.DBSerializer.setup(DBSerializer.java:153)

    at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:286)

    at oracle.jbo.server.DBSerializer.passivateRootAM(DBSerializer.java:267)

    at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(ApplicationModuleImpl.java:6026)

    at oracle.jbo.server.ApplicationModuleImpl.passivateState(ApplicationModuleImpl.java:5877)

    at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:386)

    at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:9084)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4607)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.manageReferencingState(ApplicationPoolImpl.java:1493)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.finalizeResource(ApplicationPoolImpl.java:1393)

    at oracle.jbo.pool.ResourcePool.removeResourceInternal(ResourcePool.java:848)

    at oracle.jbo.pool.ResourcePool.setState(ResourcePool.java:1103)

    at oracle.jbo.pool.ResourcePool.removeResource(ResourcePool.java:860)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.removeDeadInstance(ApplicationPoolImpl.java:2736)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4638)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.manageReferencingState(ApplicationPoolImpl.java:1493)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.recycleReferencedInstance(ApplicationPoolImpl.java:2623)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2444)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2347)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3246)

    at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:572)

    at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:234)

    at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:505)

    at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:500)

    at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:523)

    at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:869)

    at oracle.adf.model.binding.DCDataControl.setErrorHandler(DCDataControl.java:484)

    at oracle.jbo.uicli.binding.JUApplication.setErrorHandler(JUApplication.java:261)

    at oracle.adf.model.BindingContext.put(BindingContext.java:1340)

    at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:174)

    at oracle.adf.model.BindingContext.instantiateDataControl(BindingContext.java:1056)

    at oracle.adf.model.dcframe.DataControlFrameImpl.doFindDataControl(DataControlFrameImpl.java:1566)

    at oracle.adf.model.dcframe.DataControlFrameImpl.internalFindDataControl(DataControlFrameImpl.java:1438)

    at oracle.adf.model.dcframe.DataControlFrameImpl.findDataControl(DataControlFrameImpl.java:1398)

    at oracle.adf.model.BindingContext.internalFindDataControl(BindingContext.java:1189)

    at oracle.adf.model.BindingContext.get(BindingContext.java:1139)

    at oracle.adf.model.binding.DCParameter.evaluateValue(DCParameter.java:82)

    at oracle.adf.model.binding.DCParameter.getValue(DCParameter.java:111)

    at oracle.adf.model.binding.DCBindingContainer.getChildByName(DCBindingContainer.java:2713)

    at oracle.adf.model.binding.DCBindingContainer.internalGet(DCBindingContainer.java:2761)

    at oracle.adf.model.binding.DCExecutableBinding.get(DCExecutableBinding.java:115)

    at oracle.adf.model.binding.DCUtil.findSpelObject(DCUtil.java:304)

    at oracle.adf.model.binding.DCBindingContainer.evaluateParameterWithElCheck(DCBindingContainer.java:1458)

    at oracle.adf.model.binding.DCBindingContainer.findDataControl(DCBindingContainer.java:1588)

    at oracle.adf.model.binding.DCIteratorBinding.initDataControl(DCIteratorBinding.java:2472)

    at oracle.adf.model.binding.DCIteratorBinding.getDataControl(DCIteratorBinding.java:2416)

    at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3069)

    at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)

    at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3195)

    at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)

    at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:115)

    at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareModel(FacesPageLifecycle.java:359)

    to oracle.adf.controller.v2.lifecycle.Lifecycle$ 2.execute(Lifecycle.java:137)

    at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:197)

    to oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$ 400 (ADFPhaseListener.java:23)

    to oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$ PhaseInvokerImpl.startPageLifecycle (ADFPhaseListener.java:238)

    to oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$ 1.after(ADFPhaseListener.java:274)

    at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:75)

    at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)

    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:472)

    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)

    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)

    to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at alfaaesar.portal.pages.filter.AnonymousSessionFilter.doFilter(AnonymousSessionFilter.java:47)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:32)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.webcenter.framework.events.dispatcher.EventDispatcherFilter.doFilter(EventDispatcherFilter.java:44)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.wcps.client.PersonalizationFilter.doFilter(PersonalizationFilter.java:75)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.webcenter.content.integration.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:168)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.webcenter.lifecycle.filter.LifecycleLockFilter.doFilter(LifecycleLockFilter.java:151)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)

    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)

    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    ]]

    Table PXN_TXN, where the ADFBC tent passivate the StateFull AppModules State.

    (1) where you can hit this error is because you din't create / Create index of the privileges of the user who is using to connect to the DB.

    (2) ideally, the status of users is removed after the end of the session of the user, but when the app is closed unexpectedly due to the loss of Server/DB,

    State ID remains in the table and it is not recommended to clean the tables using the database standard PROCEDURE calls provided by Oracle oracle

    The following links will be useful to understand the function of the

    The application state management

    http://www.Veriton.co.UK/download/Practical_ADF_Application_Deployment.PDF

    Perform the following procedure, clean the tables PS_TXN to put in place the BC4J_CLEANUP PL/SQL package

    oracle_common/modules/Oracle.ADF.model_11.1.1/bin/bc4jcleanup. SQL

    Annex BC4J_CLEANUP. SESSION_STATE(24*60) using DBMS Scheduler to clean up the States for more than 24 hours.

Maybe you are looking for

  • Toolbar icons - can't do icons only and too small icons

    General complaint SO VERY frustrating to have to deal with the changes that are completely unnecessary and unwanted! It looks like Chrome now. If I wanted to use Chrome, I would use Chrome! Why Firefox feels that it is necessary to set a watch to wor

  • Dual operating system XP & Win7

    Hello smart people - years ago, I ran successfully asked that one XP Pro and XP Home on a pc without a score - at the start, I wanted to use. Simple. But this time I want to run XP Home on a pc with Win7. Yet once, prefer not to partition simply inst

  • Having a problem with access to several sites. PLEASE HELP QUICKLY!

    OK so I still really still did nothing with my laptop, but I tried to enter in google, download Itunes and I can not even access the E-system, all my sites search engine don't "work" ive been all day, ive tried already check if Windows 7 is the block

  • BlackBerry Smartphones receive MMS text

    I am with AT & T and I have a Blackberry Curve 8330. I can send photos, but don't know if I can receive? My friend sent me a picture and I don't know where to see?

  • Motion capture suit with no possible direct markers?

    http://bloody-disgusting.com/news/3270845/see-Andy-Serkis-acting-as-Caesar-in-dawn-of-the-plan summer-of-the-apes.I understand the motion capture suits come in all flavors. I note that there are a few green full suits and some gray suits with blackhe