Database question
Hi all!
I'm trying to read data from a data file and I use one of the example of the called package "read all the data. When I run the VI and click the Get Data button, it shows the value of the column, but get an error that says failed memory. I think this example is great because it reads without problems when the file is small. Y at - there a way around that I can pull just todays date data or data that has been transformed include date?
Thanks in advance.
You can wire an optional clause in order to reduce the data, it uses the standard SQL querries use one would adopt WHERE
That is to say ' WHERE Date >... and<...' you="" can="" limit="" the="" returned="">
Tags: NI Software
Similar Questions
-
Install PeopleTools 8,53 database question (Linux Version)
Folk,
Hello. I install PeopleTools 8,53 Internet Architecture. Database server is Dabase Oracle 11 GR 1 material. Operating system is Oracle Linux 5.
I installed JDK7, WebLogic Tuxedo 11 GR 1 material 10.3.6, and PeopleTools 8,53 successfully. But when the value PeopleTools8.53 of database in the way below.
I get an error message and cannot continue.
[user@localhost PT8.53] $ pwd
/opt/PT8.53[user@localhost PT8.53] $ ls
AppBatchDBORA dict psconfig.sh installation
QAS PSEMAgent AppBatchDBWebExe etc.
AppServ fonts PSEMViewer src
bin jre readme.txt toolsadmin.sh
utility scripts jre1.7.0 cblbin
ccr log sdk web
class PeopleTools_InstallLog.log SecurityAddIns
secvault of peopletools.properties of data[user@localhost PT8.53] $./psconfig.sh
Installer [user@localhost PT8.53] $ cd
[user@localhost setup] $ ls
CCR pscbl.mak PsTestFramework
Customer pscbl_mf.mak pstuxftp.txt
Dashboard PsCIA psvccrt
dbcodes.PT psdb.sh ptib.jar
DotNETRedist psdmtx.cfg readonly.txt
psmkreadonly.sh searchCobolPgms.ps stamp
SOAP psmkwritable.sh NOTESDB
nVisionDrill PsMpCrystalInstall unicode.cfg
OpenXmlSDK PsMpDbInstall unpack_jre.sh
parmfile PsMpPIAInstall UPGCOMPVIEWER
peopletools_ab_reg. CFX PsMpWebAppDeployInstall WebCenter
PSODBC writable.txt pkgs
BPSAA psrun.mak[user@localhost setup] $ cd PsMpDbInstall
[user@localhost PsMpDbInstall] $ ls
InstData setup.bat setup.sh[user@localhost PsMpDbInstall] $./setup.sh
Definition of directory temporary /tmp/IA.6736
Execution of setup.linux LAX_VM /opt/PT8.53/jre/bin/java-DCOMP_NAME=localhost.localdomain-DPS_UMASK = 0002
Preparing to install...
Extracting the installation resources from archive installation...
Configure the installer for this system environment...Launch of installation...
===============================================================================
PeopleSoft (created with InstallAnywhere) database configuration
-------------------------------------------------------------------------------Preparations for the Installation in CONSOLE Mode...
===============================================================================
Welcome
-------Welcome to the database Configuration Wizard PeopleSoft 8.53
This wizard will help you set up and load a PeopleSoft database.
Press ON < ENTER > TO CONTINUE:
===============================================================================
Error
-----You must run psconfig.sh (... / psconfig.sh) in your PS_HOME directory before
from the database Configuration Wizard.
Press ON < ENTER > TO ACCEPT THE SUITE (OK):[user@localhost PsMpDbInstall] $
As you can see above, I have executer./psconfig.sh in the directory /opt/PT8.53 and executez./setup.sh in the opt/PT8.53/setup/PsMpDbInstall directory.
but get the error message:«You need to run psconfig.sh (..)» (/ Psconfig.sh) in your home directory PS_HOME before you start the database Configuration Wizard. »
I have run the 2 commandes./psconfig.sh et./setup.sh to root but get the same error message.
My question is: Linux Version PeopleTools8.53 has a problem? How to solve the problem?Thank you.
1. from the same session can you try tmadmin - v running and paste the result?
2 ps - ef | grep smon will show you the running instances
To ensure that you are on the right instance echo $ORACLE_SID
3 check the log files in PS_HOME/newspapers to find if createdb10.sql went through fine.
-
ESXi 4.0 vSphere database questions
Hello all-
You have a few questions ago hit upward with the SQL 2005 database.
History:
The vmware database has been improved from 3.5 to 4.0 and now I am planning to upgrade to 4.1. By checking everything out, it was discovered that vmrollup jobs had stopped months ago.
Current issue:
We began the work of vmrollup to the top and now fill our database retains transaction log.
I recently became the administrator of the virtual machine, so I think that rollups have been a matter of right when the vSphere environment has been upgraded to 4.0 but it was without doubt the previous vm admin way to deal with it (turn them off). I want these back on however whenever the daily work starts up, it fills the transaction log in an hour. I disabled the intervals of 2 hours and 1 day in stats, hoping that would help some, but no, probably because he always tries to rollup in the past months that the work was not working. I made recommendations on the following kb 1017266, still no luck. Anyone else have any ideas?
Also thought the migration of the BDD SQL2005 to SQL2008. The db SQL2008 has much more space that I could probably allow the newspaper to grow until the work has been done, but who knows how big the 'thing' happen to. Is there a method of choice on the migration of the database from 2005 to 2008? Currently, our database is 12G and records 10G. When I start vmrollup jobs newspapers reach 20 + G less than an hour and then of course miss out us of place on the active area. Our environment is made up of 20 hosts with 95 guests.
Once I get this problem taken care of, is there a vmware database maintenance plan recommended that we should follow? I see the 2.5, but nothing recent or maybe I have not dug deep enough.
Any advice would be greatly appreciated.
If there is a way to remove these old statistics and start from scratch, that would be great
See below
-
Primary key with PHPmysql database question
I know that the update of the primary key is a taboo subject, but I have a newsletter subscription form set up that works perfectly, but I can't understand how to create the primary key. I tried to use the subscriber email address (because its unique, but when trying to add a function to update, I realize that the e-mail address may have to be updated.)
My question is how do I get a primary key that works when I'm relying on a form variable to create the folder and did so no control over the assignment of one?
Is it possible to have one assigned automatically when a Subscriber clicks on the submit button?
This is why it is always a good idea to use surrogate keys. You can just have the database generates a unique id. In MySQL, I think that there is a column with the auto_increment attribute. If you then get this id after insert, php has functions for this (mysql_insert_id() I think).
-
HPDM 4.6 - SQL database Question
I have the console HPDM installed on my machine and the device management server/gateway running on a server. The database is a database of SQL2012. I've set up a new machine with SQL2014, and I want to move the database there. I'm not moving all other parts.
The problem that I'm running into is that I don't know where to go or what pieces to apply the change to, to point the HPDM at the new location of the SQL Server.
Any help is appreciated! Thank you.
Another way to migrate the DB - dbsetup.exe stimulus, before doing so, please the current DB using the backup of backup & restore tools
1. stop the server HPDM
2. navigate... \Hp Device Manager\Server\bin in the command line window
3. run dbsetup '-language = en ""-country = US "to reopen the DIALOGUE of INSTALLATION DB box
4. choose the third option - MIGRATE
5. choose source DB and select the destination DB
6 finish the Walker
7. start the DM server
-
Hello
I just write a small example of HTML5 database and it works on my new Bold 9900 (. 353), but not on a Bold 9700 (6.0.0.570). The application is compiled with SDK 2.1.1
Code looks like:
var db; function openDB() { db = openDatabase("ToDo", "0.1", "A list of to do items.", 200000); if(!db) { alert("Failed to connect to database."); } else { alert("Connected to database"); } } function createTable() { db.transaction( function(tx) { tx.executeSql("SELECT COUNT(*) FROM ToDo", [], null, function(tx, error) { tx.executeSql("CREATE TABLE ToDo (id REAL UNIQUE, label TEXT, timestamp REAL)", [], null, null); } ); } ); } function insertTable() { db.transaction( function(tx) { tx.executeSql("INSERT INTO ToDo (label, timestamp) values(?, ?)", ["TEST", new Date().getTime()], null, null); } ); } function selectRows() { db.transaction( function(tx) { tx.executeSql("SELECT * FROM ToDo", [], function(tx, result) { for(var i = 0; i < result.rows.length; i++) { document.write('' + result.rows.item(i)['label'] + '
'); } }, null); } ); }And the idea?
Thank you.
bert2002
EDIT: is it because the Bold 9700 does not an SD card?
I just inserted a memory card in the 9700er and it works.
-
Hello
I found this help, anyone know where I can run under SQL statements? Thank you!
Displays disk space for each partition on the database server. To do this, the OLE Automation procedures option must be enabled. For new instances of SQL Server 2005, OLE Automation procedures are disabled by default. To activate this option, run the following SQL statements on your SQL Server
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Ole Automation Procedures', 1;
GO
RECONFIGURE;
GOOn your server TMS, go to a command prompt and use the SQLCMD.exe to connect to your database and run the commands.
IE sqlcmd. EXE-S. \SQLTMS EI
where. \SQLTMS is the location of your MSDS database instance
You can then issue the commands in your first post.
-
Hi Experts,
I installed Oracle 12 c on my PC (Windows7). And I appointed CBD as ORCL and PDB as PDBORCL.
I am able to connect CBD but get an error when the user HR connection which is exist in PDB.
Enter the user name: sys as sysdba
Enter the password:
Connected to:
Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production
With the options of partitioning, OLAP, advanced analytics and Real Application Testing
SQL > select name from v$ database;
NAME
---------
ORCL
SQL > select name from v$ PDB;
NAME
------------------------------
PDB$ SEEDS
PDBORCL
I updated the file tnsnames.ora with PDBORCL, although I am getting below error.
Enter the user name: hr/hr@pdborcl.
ERROR:
ORA-12154: TNS: could not resolve the connect identifier specified
Please help me solve the problem?
See you soon,.
Suri ;-)
ORA-12154: ALWAYS occurs only on SQL Client & not SQL * Net packets never leave client system
ORA-12154 NEVER involves the listener, the database itself or whatever it is on the DB server.
ORA-12154 occurs when the client wants to connect to a DB Server system by using a connection string.
AMT-03505 is thrown by tnsping & is the same error ORA-12154 thrown by sqlplus or others.
The find operation fails because the supplied name cannot be resolved to any remote DB.
The analogous operation would be when you wanted to call someone, but did not find their name in any directory.
The most common cause for ORA-12154 error is when the connection alias cannot be found in tnsnames.ora.
The research of the alias operation can have an impact on the content of the sqlnet.ora file. DOMAIN entry specifically.
TROUBLESHOOTING GUIDE: ORA-12154 & TNS-12154 TNS: could not resolve service name [114085.1 ID]
http://edstevensdba.WordPress.com/2011/02/26/ora-12154tns-03505/
-
Patch # 9858539 R12 database questions
Hi experts:
I followed the remark: "interoperability Notes Oracle EBS R12 with Oracle Database 11 g (11.2.0.3) 2 (Doc ID 1585578.1)". "and installed a 11.2.0.3 on a Linux server." Its done and now I'm trying to organize my documentation for the facilities more. I found under patch #9858539 (one of the patches after installation) there are the following scripts to run. I revisit the patch readme, but has not seen anywhere saying that I need to do the following steps. Sorry to ask but do you know your expert brain can tell you what that those to and where I got them under this patch?$ cd $ORACLE_HOME/rdbms/admin
SQL > @ @catnomtt.sql
@ @catnomta.sql
@ @dbmsmeta.sql
@ @dbmsmeti.sql
@ @dbmsmetu.sql
@ @dbmsmetb.sql
@ @dbmsmetd.sql
@ @dbmsmet2.sql
@ @catmeta.sql
@ @prvtmeta.plb
@ @prvtmeti.plb
@ @prvtmetu.plb
@ @prvtmetb.plb
@ @prvtmetd.plb
@ @prvtmet2.plb
@ @catmet2.sql
SQL > change the package compilation plsql_ccflags = dbms_metadata_int ' ku$ xml_enabled: true ';
SQL > change the package compilation plsql_ccflags = dbms_metadata_util ' ku$ xml_enabled: true ';
Thank you for your help.
These scripts are mentioned in the Readme.
Make sure that the header of each script if you want to get more details about them.
Thank you
Hussein
-
Hi all
In the sub query I used the remote database table in the join. If run the table individually, I am able to see the results.
Everything into account the remote database table to my request, I face the error below.
I tried to create the view of the table as below
Error:
ORA-02070: database is not supported in this context
02070 00000 - "database %s %s does not support the %s in this context"
* Cause: The remote database does not support the function named in
the context in which it is used.
* Action: Simplify the SQL statement.
Error on line: 1 column: 516
Tried to create a point of view doesn't allow:
------------
CREATE or REPLACE FORCE VIEW winq20 as
Select * from [email protected];
--------------
I face the error for the situation.
1. to join the remote database table to the query.
2 try to create the view of the table. make the same mistake.
----------------------------------------------------------------------------------------------
Select * from [email protected] a, all_tab_cols b where a.table_name = b.table_name;
------------------------------------------------------------------------------------------------
Need your help for this problem.
Thank you
Fabrice
This could be due to the long type column. try to remove that.
-
A database of "Standard Edition" may be a pluggable database in a database of shared container 'Enterprise Edition'?
NO... Multitenant is only for enterprise edition
-
I had a thought the other day and you want to run it by other professionals. Currently, my organization runs a performance test weekly with one of our database. What typcally happens, it is that we back up the database, run the load test, and restore the database. My thought was rather than go through all that, use the flashback database and flash of the database until before the load test started. The database is on Linux 32-bit and 10.2.0.4. Am I think it properly? It should work? Let me know your opinion. Thanks in advance
Published by: kirkladb on 30 Sep 2012 15:45Flashback Logs introduce overhead. Overhead costs were particularly bad in point 10.2 (bug 6168063) but are supposed to be lower at 11.2
Hemant K Collette
-
Update of a field of PHP database question
Hello
I use a box of selection multiple to allow multuple vales is selected and registered in the database
When I add the deposited values I use implode to separate the values with a comma.
$insertSQL = sprintf ("INSERT INTO finance_data (Link_record, Savings_Year, Savings_Trust, Savings_Type, Savings_Amount, Savings_Additional_Notes) VALUES (%s %s %s, %s, %s, %s)",
GetSQLValueString ($_POST ['inserttracker'], "text").
GetSQLValueString ($_POST ['Savings_Year'], "text").
GetSQLValueString ($_POST ['Savings_Trust'], "text").
GetSQLValueString (implode (',', $_POST ['Savings_Type']), "text").
GetSQLValueString ($_POST ['Savings_Amount'], "double").
GetSQLValueString ($_POST ['Savings_Additional_Notes'], "text"));When I then use an update method, the value appears correctly in the field, however by using the same implode to update the field in the same way does not seem to work and leaves me rather with value null on update
I tried to use different variables and the implode apart from the update even called something else, but I had no luck
update code
If ((isset($_POST["MM_update"])) & & ($_POST ["MM_update"] == "form1")) {}
$updateSQL = sprintf ("UPDATE finance_data SET Link_record = %s Extended_Index = %s Savings_Year = %s, Savings_Trust = %s, Savings_Type =
"%s Savings_Amount = %s Savings_Additional_Notes = %s WHERE Master_index = %s,"
GetSQLValueString ($_POST ['Link_record'], "int").
GetSQLValueString ($_POST ['Extended_Index'], "text").
GetSQLValueString ($_POST ['Savings_Year'], "text").
GetSQLValueString ($_POST ['Savings_Trust'], "text").
GetSQLValueString (implode (',', $_POST ['Savings_Type']), "text").
GetSQLValueString ($_POST ['Savings_Amount'], "double").
GetSQLValueString ($_POST ['Savings_Additional_Notes'], "text").
GetSQLValueString ($_POST ['Master_index'], "int"));any suggestions would be helpful
Thank you
Krazy Maud wrote:
When I then use an update method, the value appears correctly in the field, however by using the same implode to update the field in the same way does not seem to work and leaves me rather with value null on update
Have you checked if $_POST ['Savings_Type'] is an array? The name attribute of the multiple select element must have an empty pair of brackets like this:
-
PeopleTools 8.49 and FSCM 9.0 system database question
People,
Hello. I'm using PeopleTools 8.49 and MS SQL Server 2005. My PIA runs correctly. I just installed FSCM 9.0 system database successfully. In application designer, I have login name to FSCM 9.0 database using user VP1 and password VP1. This message appears:
"The database is free 8.48. The PeopleTools running require a database during the liberation 8.49. »
AFAIK, FSCM 9.1 requires PeopleTools 8.50.02 or higher. FSCM 9.0 requires PeopleTools 8.48 or higher. So, for my PeopleTools 8.49, I can't installed FSCM 9.0 only. But PeopleTools 8.49 and FSCM 9.0 got this problem aa (above). People can help solve this problem?
Thank you.Old FSCM9.0 was built on Peopletools 8.48 (previous the recut of revision 1).
Since you are using Peopletools 8.49, you must upgrade the database to the new version. Please, follow the chapter "Upgrading your database to the latest version of Peopletools" from the Guide to install Peopletools.Nicolas.
-
Relationship of MySQL database question
I'll put up a site where registered users can categorize their vinyl Japanese toys (i.e. vinyl kaiju). I have 2 tables:
collection
Members
Member has an ID that is unique to each Member (naturally). within the collection, I have kaijuID and username.
I need to understand what the best way to get the ID of the Member table to fill in the table of the collection, which allows each registered user to see just their collection.
I can wrap the head around displaying the collection based on the user ID - I just can't understand where to add the user ID information in the collection database.
The structure of the site has:
login page
Homepage
Add kaiju
Discover the kaiju
Update kaiju
Search kaiju
Add / view / update / search pages will use all ID's not a big problem because I have the ID of the user as a basis for the results on these pages. It is the addition of a new part of kaiju that I can't understand. Where this form would associate the connected to the user that he added silently to their identity as well as the toy info card? A hidden field would be a natural assumption - that could be part of the action to submit?
So basically, here's the breakdown:
User A has an ID 001
User A wants to catalogue kaiju 2: Godzilla and Gamera
When the user has submitted these two each will have the ID of 001 user added in the column of table collection labelled as username (which is identical to the column in the Member table).
That will allow the collection seen precisely show just member collection Clément.
Phew. Any suggestion would be appreciated. I looked through the documentation CS3 and have achieved to date, but don't see anything for relational databases.
Thank you!<---- this="" goes="" at="" the="" top="" of="" all="" of="" the="" pages="" in="" code="">---->
From there, when you create the Recordset, use the filter option, for example:
filter: user_name =
Session variable
user_nameDifferent session variables that can be used in the present is in the links under the Sessions tab.
In each table, you will need to have a field named 'user_name '. Basically, think of it as a link between the 2.
-
A SQL guide with a convenient database (question)
Can someone point me to a good guide SQL (book in pdf format, for example) that comes with a database to practice and which is free?
Thank youHello
Have a look here: http://www.oracle.com/technology/products/database/xe/index.html
Oracle XE edition should provide a good start (with a small footprint) on which to run SQL. There are tutorials on the site of Oracle, as well as many other resources on the net instead of books!
HTH - Chris
Maybe you are looking for
-
Apple ID by using the e-mail to icloud
I was about to change my Apple ID existing (gmail), using icloud email address but the message "your Apple cannot end in @icloud.com different choose email address.
-
I just downloaded Firefox. I'm running Windows 7 Pro. There is no Firefox button.
-
Identify broken links referenced through the smart album
Hi guys,. I work with LR and export my photos in a floder I download later in Photos, due to its integration in OS X for viewing, sharing, etc... I use the option referenced in Photos app to do not copy the photos twice on the hard drive. As I someti
-
Omni 100-5050 HP all-in-one: hp hardware
I need a motherboard for my hp computer. model No. BT590AA My computer is unbootable to my cpu LED lights are flashing. My power light is on and I can hear the breath of fan cooling, but my screen is not lit. MNB
-
Hello! I get the error message 'Error 25' when I try to read data to the RT in the FPGA. It has worked before, but then decided to stop working. Weird to notice is that I seem to be able to establish a contact with the FPGA, since the "target open FP