database simple html5 works in the browser but not emulator

I have a database of simple html5. It works on browser (chrome/safari) but not in the emulator. If after having included the html5_init.js file does not work on an os device five? I also simulated a sd card, so this isn't a problem, why it does not work. Here is the code:

html PAG

!DOCTYPE html PUBLIC-//W3C//DTD HTML 4.01 Transitional//Ehttp://www.w3.org/TR/html4/loose.dthtmheameta nameviewpor idMeta contentinitial-scale=1.0,user-scalable=n meta namex-blackberry-defaultHoverEffec contentfals link  relstyleshee typetext/cs hrefcss/common.cslink  link  relstyleshee typetext/cs hrefcss/start.cslink link  relstyleshee typetext/cs hrefcss/tabs.cslink
titlAdd Birthda/titlscript typetext/javascrip srcjs/common.j/scripscript typetext/javascrip srcjs/html5_init.j idhtml5_ini/scripscript typetext/javascrip srcjs/birthdayapp.j/scrip
/heabody onLoadinit()
       div classmy_heade
           p aligncenteAdd Birthda/
       /di

           div classmain-pane
               div classpanel-top-lef/di
               div classpanel-top-righ/di
               div classpanel-insid
                div classpanel-noga
                   div classro
                       div classlaeFirst Name/di
                       input typetex idfirstnam
                   /di
                   div classlistSeparato/di
                   div classro
                       div classlabeLast Name/di
                       input typetex idlastnam
                   /di
                   div classlistSeparato/di
                   div classro
                       div classlabeEmail/di
                       input typetex idemai
                   /di

                    div classlistSeparato/di
                   div classro
                       div classlabePhone Number/di
                       input typetex idphonenumbe
                   /di
                   div classlistSeparato/di
                    div classro
                       div classlabeImage/di
                       input typetex idimag
                   /di
                   div classlistSeparato/di
                    div classro
                       div classlabeBirthday/di
                       input typetex idbirthda
                   /di
                    div classlistSeparato/di
                    div classro
                       div classlabeBaught Gift/di
                       input typetex idbaughtgif
                   /di
                       div classlistSeparato/di
                    div classro
                       div classlabeReminder Day/di
                       input typetex idreminderda
                   /di

                /di
               /di
               div classpanel-bottom-lef/di
               div classpanel-bottom-righ/di
           /di
           input typebutto stylefloat: right; padding: 6px; margin-right: 8px idsav valueSav onClickmakeReminder()

        ul idreminder 

       /u 

        /bod/htm

Now for the javascript database thread

//Pre-requisites
var birthdayapp = {};

//Step 1. Opening the database
birthdayapp.db = null;

birthdayapp.open = function() {
  var dbSize = 5 * 1024 * 1024; // 5MB
  birthdayapp.db = openDatabase('bdreminder', '1.0', 'Birthday Reminder', dbSize);
}

birthdayapp.onError = function(tx, e) {
  alert('Something unexpected happened: ' + e.message );
}

birthdayapp.onSuccess = function(tx, r) {
  // re-render all the data
  // loadReminders is defined in Step 4a
  birthdayapp.getAllReminders(loadReminders);
  alert("an action was performed successfully!");
}

//Step 2. Creating the table
birthdayapp.createTable = function() {
  birthdayapp.db.transaction(function(tx) {
    tx.executeSql('CREATE TABLE IF NOT EXISTS bdreminders(reminder_id INTEGER PRIMARY KEY ASC,'+
                                                        'firstname   varchar(50), '+
                                                        'lastname    varchar(50), '+
                                                        'email       varchar(50), '+
                                                        'phonenumber varchar(50), '+
                                                        'image       varchar(50), '+
                                                        'birthday    varchar(30), '+
                                                        'baughtgift  char(3),     '+
                                                        'reminderday varchar(50),'+
                                                        'createdon   date)', []);
  });
}

//Step 3. Adding data to the table
birthdayapp.addReminder = function(firstname,lastname,email,phonenumber,image,birthday,baughtgift,reminderday) {
  birthdayapp.db.transaction(function(tx){
    var createdon = new Date();
    tx.executeSql('INSERT INTO bdreminders(firstname, lastname, email, phonenumber, image, birthday, baughtgift, reminderday, createdon) '+
                  'VALUES (?,?,?,?,?,?,?,?,?)', [firstname, lastname, email, phonenumber, image, birthday, baughtgift, reminderday, createdon],
        birthdayapp.onSuccess,
        birthdayapp.onError);
    });
}

//Step 4. Selecting data from the table
birthdayapp.getAllReminders = function(renderFunc) {
  birthdayapp.db.transaction(function(tx) {
    tx.executeSql('SELECT * FROM bdreminders', [], renderFunc,
        birthdayapp.onError);
  });
}

//Step 4a. Rendering data from the table
function loadReminders(tx, rs) {
  var rowOutput = "";
  for (var i=0; i < rs.rows.length; i++) {
    rowOutput += renderReminders(rs.rows.item(i));
  }

  var reminders = document.getElementById('reminders');
  reminders.innerHTML = rowOutput;
}

function renderReminders(row) {
  return '
  • ' + row.reminder_id + '[X]
  • '; } //Step 5. Deleting data from the table birthdayapp.deleteReminder = function(id) { birthdayapp.db.transaction(function(tx) { tx.executeSql('DELETE FROM bdreminders WHERE reminder_id=?', [id], birthdayapp.onSuccess, birthdayapp.onError); }); } //Step 6. update the table birthdayapp.updateReminder = function(reminder_id,firstname,lastname,email,phonenumber,image,birthday,baughtgift,reminderday) { birthdayapp.db.transaction(function(tx) { tx.executeSql('UPDATE bdreminders set firstname = ?, lastname = ?, email = ?,phonenumber = ?,image = ?,birthday = ?, baughtgift = ?, reminderday = ? WHERE reminder_id = "reminder_id" ', [firstname, lastname, email, phonenumber, image, birthday, baughtgift, reminderday], birthdayapp.onSuccess, birthdayapp.onError); }); } //Step 7. select a specific from table birthdayapp.getOneReminder = function(reminder_id) { birthdayapp.db.transaction(function(tx) { tx.executeSql('SELECT * FROM bdreminders WHERE reminder_id = ? ', [reminder_id], birthdayapp.onSuccess, birthdayapp.onError); }); } //select specific record function makeReminder(){ alert("add reminder called"); var fn = document.getElementById('firstname').value; var ln = document.getElementById('lastname').value; var em = document.getElementById('email').value; var ph = document.getElementById('phonenumber').value; var im = document.getElementById('image').value; var bd = document.getElementById('birthday').value; var bg = document.getElementById('baughtgift').value; var rd = document.getElementById('reminderday').value; birthdayapp.addReminder(fn,ln,em,ph,im,bd,bg,rd); } //init function function init() { birthdayapp.open(); birthdayapp.createTable(); birthdayapp.getAllReminders(loadReminders); }

    Tags: BlackBerry Developers

    Similar Questions

    • Train with webutil works with the browser, but not with webstart JNLP 12 c

      Hello

      I set up forms and reports suite 12 c according to the instructions and I'm testing my forms updated since version 10 g.

      In some forms, I use webutil.

      I can run forms without webutil with the browser or java web start (everything works fine).

      I have problems with the forms use webutil tha, they work very well with the browser, but not with java web start.

      When I run forms with webutil and webstart I see all white and the "crash" application: I must leave because other forms without webutil also do not work.

      Here is my config in formsweb.cfg:

      [Appws] <-start java web

      form = nomeform

      Archive = frmall.jar, frmicons.jar

      WebUtilArchive = jacob.jar, frmwebutil.jar

      WebUtilTrustInternal = true

      WebUtilLogging = off

      WebUtilLoggingDetail = normal

      WebUtilErrorMode = alert

      WebUtilDispatchMonitorInterval = 5

      WebUtilTrustInternal = true

      WebUtilMaxTransferSize = 16384

      baseHTML = webutilbase.htm

      baseHTMLjpi = webutiljpi.htm

      basejnlp = webutil.jnlp

      WebStart = on

      [appnows] <-no java web start

      shape = mercurio

      separateFrame = true

      Archive = frmall.jar, frmicons.jar

      WebUtilArchive = jacob.jar, frmwebutil.jar

      WebUtilTrustInternal = true

      WebUtilLogging = off

      WebUtilLoggingDetail = normal

      WebUtilErrorMode = alert

      WebUtilDispatchMonitorInterval = 5

      WebUtilTrustInternal = true

      WebUtilMaxTransferSize = 16384

      baseHTML = webutilbase.htm

      baseHTMLjpi = webutiljpi.htm

      basejnlp = webutil.jnlp

      What could be the problem?

      Gianpaolo

      Remove Appws:

      Archive = frmall.jar, frmicons.jar

      WebUtilArchive = jacob.jar, frmwebutil.jar

      baseHTML = webutilbase.htm

      baseHTMLjpi = webutiljpi.htm

      Add frmicons.jar and jacob.jar to $ORACLE_HOME/forms/java/extensions.jnlp.

      and try again.

      Concerning

    • ID of Leap BlackBerry blackBerry works in the browser, but not in BlackBerry settings

      When accessing the Web site my BlackBerry Id and password are fine, but when accessed through the settings on the device password is not recognized and screen stays on the login page.
      Cannot do anything, not even reset.
      New device and the first time I create a BlackBerry id.

      WiFi-carrier switching does not solve the problem.

      I did a cleanup of security that the device is new and no specific data was on it.

      Restart from scratch, the installer worked.

    • Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

      Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

      I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
      I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.


    • Entity displayed in the browser, but not displayed in the logic model

      Hello

      In a drawing, I got myself in a situation where two entities are identified in the logic model of the browser, but are not as on the logical schema. I have created the entities, but removed later. However, when I engineer the logic of the relational model, two tables based on the entities are created. I do something wrong, or is this a bug, entities having not correctly deleted for some reason any?

      Kind regards.

      John.

      Hi John,.

      There is a problem in version 4.1.1 of maker of data if some entities or other objects are deleted from a template that has already been registered.  On the next saved position, the saved definition only is not updated correctly, and deleted items reappear on the loading of this registered version.

      This will be addressed in the next version.

      In the meantime, the workaround is to use save them as rather Save to save your template.

      David

    • Verification of link - worked in the preview, but not after sending to the browser

      I had to reorganize my files for this project due to the demand of the customer. I moved all the files inside DW. I did a check of all the Local Site links. Most of the links have been updated. I need to fix the rest.

      I downloaded on my server. When I test the links in the navigation bar, they do not work. I don't know what the problem is.  Thanks to all those who will look at this for me.

      http://www.webassistantsllc.com/clients/QoP

      Lynne

      The structure of the files should be the same locally because they are on the remote control.  If you work in DW and the files are not in a folder named QOP but you start linking to pages in your local folder, DW will keep track of them.  However, once you move the file to the remote control and all of a sudden you put files in the QOP folder, then all the links will be incorrect.y

      When you move files, always do it through the Control Panel files in DW, and then make sure that the same folder structure exists on the remote control.

    • CFAjax and jquery json - runs in the browser but not Planner

      This one has me quite confused.

      I have a baby of test routine:

      TestRun.cfm

      < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

      " < html xmlns =" http://www.w3.org/1999/xhtml ">

      < head >

      < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

      < title > Untitled Document < /title >

      < / head >

      "< script src="//ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js "> < / script >

      < cfset dataout = timeformat (now (), "mm: SS") >

      < name cfquery = "testrun" datasource = "#application.ccidatasource #" >

      Bridge update

      Set testtime = < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#dataout #" >

      < / cfquery >

      < script type = "text/javascript" >

      $.getJSON ("cciBridgeServices.cfc", {}

      method: "hemagg."

      who: "ECS"

      returnFormat: 'json ',.

      queryformat: 'column '.

      }, {function (d)}

      var text = "";

      lines of the var = d.ROWCOUNT;

      });

      < /script >

      < body >

      < / body >

      < / html >

      The service is simple as well

      < cffunction = access "hemagg" name = "remote" returntype = "numeric".
      Description = "Test function using just about anything" >
      < cfargument name = "who" required = "yes" >
      < cflog application = 'Yes' text = Hello "auto run" >
      < name cfquery = "testrun" datasource = "#application.ccidatasource #" >
      Bridge update
      Set testcol = < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#testtext #" >
      < / cfquery >
      < cfreturn 1 >

      < / cffunction>

      If I run testrun in a browser, all is well.

      If I create testrun as a scheduled task in the CF administrator, or I use wget to process, the hemagg service is not running.

      I checked this by adding the < cflog... > command.  The SS is updated, but the text is not.it?
      I tried to add a returnformat and an output = "" to the < cffunction >

      Can someone explain what is happening here and how to fix it?

      Thanks in advance

      Are the inputs required for different tasks all the time? You can pass variables via the URL of the task to code server-side, or store them in a database to read when the task runs. What you need to do is to remove all of the interactive stuff and leave only your coldfusion code.

      For example, you can run the interactive treats as usual, but instead to create a task that calls your coldfusion with all page updates table updated etc. rather before calling this page directly. It will then run initially for the first time and then the demand for a later date.

    • communication serial port works to the max, but not in labview

      Hello

      I am trying to connect a regulator to oxygen flow (flow Bronkhorst EL) to a laptop through a USB using MAX and Labview series port adapter. After the MAX aperture, I see my instrument on port COM5 and need to change the baud rate to 9600 to 38400. After this I querry the command: 06030101217D00\r\n, I can turn the mass flow at maximum power regulator (looks a little weird order because of the syntax of the instrument, but it works very well). If I write a vi to do the same and send the same string through visa series, I get no results, it seems that the command is not send to the device. I tried to change all settings for the serial port, nothing seems to work.

      I've attached an example vi here, any suggestions?

      Hello

      just a simple misunderstanding, happy that you added the code.

      In MAX \r\n will be always interpreted as send a cr and line break.

      In LabVIEW only when you select \codes view by right-clicking on the channel.

      In your situation, it now sends a-a r another- and a n

    • GPS works on the Simulator, but not on phone

      Hello

      I created a simple application that gets the location of the device's GPS. The app works perfectly on the Simulator, but I have no GPS updates on the phone. I've been in options-> device-> Location.Settings on the phone and can see the GPS updates are coming through. But the app says there is no valid received GPS.

      I tried it on BlackBerry 9800... All I get on the phone is 'pending GPS update', that my app is displayed if no valid GPS don't trouble is received.

      Thanks in advance.

      Kevin

      C criteria = newCriteria();

      c.setHorizontalAccuracy (Criteria.NO_REQUIREMENT);

      c.setVerticalAccuracy (Criteria.NO_REQUIREMENT);

      c.setCostAllowed (true);

      c.setPreferredPowerConsumption (Criteria.POWER_USAGE_HIGH);

      LocationProvider lp;

      Try

      {

      LP = LocationProvider.getInstance (c);

      if (lp! = null)

      {

      lp.getLocation (timeout);

      lp.setLocationListener (newMyLocationListener(),-1, 1, 1);

      }

      on the other

      {

      Dialog.Alert ("sorry - your phone does not support GPS");

      }

      }

      catch (Exception e)

      {

      System.

      Err.println (try ());

      }

      }

      private class MyLocationListener implementsLocationListener

      {

      public voidlocationUpdated (LocationProvider provider, a place)

      {

      if (location! = null& location.isValid ())

      {

      QualifiedCoordinates qc = location.getQualifiedCoordinates ();

      Try

      {

      Lat string = Double.toString (qc.getLatitude ());

      String long = Double.toString (qc.getLongitude ());

      UpdateScreen ('place of registration successfully');

      }

      on the other

      {

      UpdateScreen (' Failed to day location ');

      }

      }

      catch (Exception e)

      {

      }

      }

      on the other

      {

      UpdateScreen ("waiting for GPS update");

      }

      }

      public void providerStateChanged (LocationProvider provider, intnewState)

      {

      TODO: If the provider has been disabled, then disable the reporting

      }

      }

      Try the examples of programs that you can find here:

      http://supportforums.BlackBerry.com/T5/Java-development/BBM-shareContent/m-p/1796237#M203486

      or here:

      http://supportforums.BlackBerry.com/T5/Java-development/simple-location-API/Ta-p/1145951

      See if these work on the unit.  If they do, look at the code listed and compare with yours.

    • Play video works on the Simulator, but not on phone

      Hello

      I created a simple application that plays a video of Media Card. It works very well and play the video properly on simulators. But when I loaded the app on the phone (BB Bold), it shows just a white screen and no video.

      The media file is in the following path on the map:

      / Media Card/BlackBerry/videos/I66.3GP

      The path should be:

      file:///SDCard/BlackBerry/videos/I66.3gp

      OR

      file:/// Card/BlackBerry/videos/I66.3GP Media

      Any suggestions on how to get it to work on the phone?

      class final VideoScreen extends form {}
      Private player player;
      private VideoControl vc;

      {VideoScreen()}
      try {}

      Reader = Manager.createPlayer ("file:///SDCard/BlackBerry/videos/I66.3GP");
      Player.Realize ();
      VC = player.getControl ("VideoControl") (alarm);
      vc.initDisplayMode (VideoControl.USE_DIRECT_VIDEO, this);
           
      GUIControl gc;
      If ((gc = player.getControl ("GUIControl")) (GUIControl)! = null)
      Add ((Field) gc.initDisplayMode (GUIControl.USE_GUI_PRIMITIVE, null));
      vc.setDisplayLocation (15, 15);
      vc.setDisplaySize (400, 400);
      vc.setVisible (true);
      Player.Start ();
        
      } catch (Exception e) {}
      }
      }

      Problem solved! It turns out that the "IoException: cannot access the media file" is because the BB is hooked up to the computer via USB, apprently Media Card is not available when USB is plugged.

      However, when USB is removed, I get this error:

      java.lang.IllegalArgumentException: arg must not be null and must be a javax.microedition.lcdui.Canvas

      It turns out that the audio/video tutorial of BB is incorrect, initDisplayMode cannot accept "GUIControl", he cannot accept that the canvas. In addition, if we directly on canvas without instantiate, it will be also caused an IllegalArgumentException.

      Then, the following code works:

      VideoControl vc;

      Canvas canvas = new MyCanvas ();

      If ((vc = player.getControl ("VideoControl")) (alarm)! = null) {}

      vc.initDisplayMode (VideoControl.USE_DIRECT_VIDEO, canvas);

      vc.setDisplayLocation (15, 15);

      vc.setDisplaySize (400, 400);

      vc.setVisible (true);

      Player.Start ();

      }

      While (MyCanvas) is a dummy class that extends from javax.microedition.lcdui.Canvas

      Import javax.microedition.lcdui.Canvas;

      import net.rim.device.api.ui.Graphics;

       

      MyCanvas class extends Canvas {}

      public

       

      public MyCanvas() {}

      }

       

      Protected Sub paint (javax.microedition.lcdui.Graphics arg0) {}

      / / TODO Auto-generated method stub

      }

      }

    • HTML5 Preview in the browser does not not in Cp9

      I've been searching around the forum and couldn't find an answer. When I select HTML5 Preview for my standard project, it opens in my default browser, but I see is the animation of loading of rotation for a long period of time. I mean it's something to do with DNS or host Local, but I'm not knowledgeable enough in this area. Does anyone remember if they have encountered this problem before and that if they solve?

      You can fix it now, but just in case where...

      I got our staff COMPUTER to install a local Web server, WAMP on my machine to windows development. (Mac using MAMP, LInux uses the LAMP).

      Instead of the preview, most of my projects is published on the local disk and then access it via the url web as well as playback of HTML5 video, interactive, objects, etc. is activated via a real web connection between the browser and the server.

      Many insight problems are eliminated: flash security, interactions, JavaScript, HTML5 training can introduce each their own set of conflicts, concerns and workarounds when you preview locally.

    • How can I make Firefox the browser but not to make the default browser?

      I want to use Firefox as a browser on some sites, but not all. I don't want to make Firefox or Internet Explorer as default browser but use each on sites such as Google or MSN certaion web.

      For your choice of default browser, consider that you want to manage links in other programs, such as word processors, Adobe Reader, or an external e-mail program. Windows will use your default browser to open links.

      Then, when you visit a site in a favorite browser, open the browser and use bookmarks or Favorites to get there.

    • Camera works to the MAX, but not in LabVIEW

      I struggled a lot with getting a camera DCC3240M of Thorlabs working in LabVIEW. The software supplied (Thorcam) works as it should. However, the LabVIEW SDK does not work as it should, it gives an error 155 "the operation is not supported.

      Instead of the SDK software, I tried the drivers for DirectShow and now the camera arrives in MAX and works as it should. He also appears with IMAQdx list Cameras.vi and in Vision Acquisition Express vi. BUT when I try to run IMAQdx open Camera.vi or the Express vi it does not work. Open device gives a DirectShow error code 0 x 80040275 "no capture hardware is available, or the hardware is not responding." And when I try to select the camera in the express vi, a red icon is displayed and I can only choose "Cancel":

      It's really very annoying that the camera obviously work with the drivers provided, but I can't use it in LabVIEW.

      I would be grateful for any ideas what is wrong. I'm running LabVIEW 32 bit on 64 bit Win8.1.

      Problem solved!

      I carefully removed all the drivers that came with the camera and then I installed the drivers from manufacturers (IDS) instead of Thorlabs drivers. And now it works, the camera always appears in MAX and it does not work. But now the supplied screw. I'm so happy. It took me a week to understand.

    • App works on the Simulator, but not on the device

      Just try to run the helloworlddemo app compiles fine and works on the Simulator without problem. All I get on the device is an icon of the application that does nothing when clicked.

      I had read this might have to do with the version of the JDE is high for the operating system on the device, but I'm running JDE 6.0.0.37 and the operating system on the device is 6.0.0.666

      I tried with my own app first, compiled, signed it and get the same result as helloworld, then its certainly some mounted sort of question but I have no idea of what

      Thank you

      Sheldon

      Thought of it - was to set the permission of application so that all 3 items were "allow."

    • Event Swipe works in the Simulator, but not on the device

      I'm using panels on my 9900 and I have 4 panels that the user will slide back and forth similar functioning BB app world, changing the summary of comments on signs etc..

      My expection who was up and down for scanning of touch screen functions and the touchpad has the same function by default, that is to the left and right slide on the screen should also be identical to forehand and left on the block to tack. But it does nothing for the panels when you use the trackpad.

      So I replace NavigationMovement and and can see the touchscreen and the track pad to generate a NavigationMovement event with +/-x according to the direction slide. So I'm first puzzled why hit swiping the trackpad on the left and right triggers not the same behavior by hitting swiping left and right on the touch screen.

      Accept that as a limitation of the API, I added my own features to NavigationMovement to inject a key event when user left or right on the trackpad moves. As follows:

      EventInjector.TouchEvent [] moveEvents = new EventInjector.TouchEvent [7];

      moveEvents [0] = new EventInjector.TouchEvent (TouchEvent.MOVE, 420, -1, -1, 60-1);
      moveEvents [1] = new EventInjector.TouchEvent (TouchEvent.MOVE, 360, 60,-1, -1, -1);
      moveEvents [2] = new EventInjector.TouchEvent (TouchEvent.MOVE, 300, 60,-1, -1, -1);
      moveEvents [3] = new EventInjector.TouchEvent (TouchEvent.MOVE, 240, 60,-1, -1, -1);
      moveEvents [4] = new EventInjector.TouchEvent (TouchEvent.MOVE, 180, 60,-1, -1, -1);
      moveEvents [5] = new EventInjector.TouchEvent (TouchEvent.MOVE, 120, 60,-1, -1, -1);
      moveEvents [6] = new EventInjector.TouchEvent (TouchEvent.MOVE, 60, 60,-1, -1, -1);
      EventInjector.TouchEvent.injectSwipeGesture (480, 60, moveEvents);

      It works perfectly in the Simulator, but on the device, there is no movement at all. So I thought that maybe the touchpad on the Simulator is more sensitive than on the real device, so I added a menu item to perform the injection above. Again, this works perfectly on the Simulator, but nothing on the device.

      Has anyone tried this brain left and just before the injection?  Up and down the injection works perfectly on the device.

      Have you enabled event injection in request permission settings for your application?  It is disabled by default.  You can do so by going to Options-> Application, select your application and click on change permissions.  You can also request these permissions programmatically using the class ApplicationPermission.

    Maybe you are looking for

    • Partitioning Z510

      Hi, I bought z510 I want to score with the built-in operating system, please help me to do so.

    • Broken link for the Download Center - Windows XP Service Pack 3 - file to Image CD ISO-9660

      Need to make a physical copy to repair the machine. The Download Center seems to have a broken link when you try to save the file.

    • speakers of the laptop no longer works

      Laptop my laptop has installed loudspeakers that WERE arnt working work anynore. I tried to figre problem using Skype and I could not hear anything from my speakers, I put the volume upward and made sure they wernt on mute... still could not hear any

    • Email sends two copies of e-mail to the recipient

      Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs My email account send two copies of the same message every time I have send a message - that is to say whenever I have send a message,

    • Activation Adobe Creative Suite 5.5. Netherlands

      HelloI want to activate my Creative Suite 5.5 software Student and Teacher Edition. I was a student when I get the Adobe Creative Suite 5.5. Standard design as a gift from my parents. But for reasons I have not used the product. Later times at this m