Database Visual C 2010 Fatal ErrorC1902 incompatibility... I can't find THE files do not match mspdb *. Why I always get this error?

I just installed Visual C++ 2010 express and written my program "Hello, World", which was able to build because of this error. Then I restarted my computer and the build worked. I then added a few lines of code in comment (I work through a C++ Tutorial) and failure of reconstruction. I removed the comments and the build has always failed. I restarted the computer and still once, a generation that failed, all because of this C1902 not match the database error. Where should I go from here? I have to admit, I don't know a lot about the microsoft system files and I feel a bit lost and discouraged. I did a search in the system-wide for all files containing "mspdb" and it is only the four installed with Visual C++ 2010 express, mspdbsrv.exe, mspdb100.dll, mspdbcore100.dll and mspdbst.dll. They are all version 10.0.30319.1, leading me to believe that my understanding of what means this error is wrong or I am somehow wrongly the whole. Any ideas?
On a side note, I read in another forum that someone deleted mspdb100.dll and their problem solved, but I'm afraid to start deleting shared libraries. I have MORE questions I can't fix stack up on this one.

Hello

I suggest you contact the Visual support from the link below.

http://social.msdn.Microsoft.com/forums/en-us/vcgeneral/threads/

Hope this information is useful.

Tags: Windows

Similar Questions

  • Where can I find the Multipoint server 2010 and 2011 Dutch languagepack?

    original title: Multipoint Server language packs?

    Where can I find the Multipoint server 2010 and 2011 Dutch languagepack?
    There is a pack of 35 languages available, where can I find it?

    Thank you

    Please repost your request in the Forum Windows Multipoint Server.  Thank you!

  • New computer, transfer of hard drives... How can I access the files executable for MS Word or, more importantly, Visual Studio 2012?

    I had an old computer get taken out by a storm. I managed to save to computer hard drives and installed them in a new computer. I can see my programs MS Word, PowerPoint, etc. and Visual Studio 2012. The problem I have is to find the executables for these programs so that I can actually use them. Is there a work around or do I still have to pay for them? VS is a pro version and more than 2K last I checked! Am I missing just the files in a folder, that I don't see? I seem to be able to find the files exc for other programs. (Rosetta Stone)

    Really, I don't want to buy these programs and will probably go to another (more accessible) suite of software, if necessary. I can write the code in other IDEs and use another desktop software which ensures the compatibility of the MS products if that's the case.
    Thank you for your time and understanding,
    HH

    You cannot run programs from the old hard disk, they must be reinstalled on the new installation of Windows computers.

    Apart from the home folder for Office who would be in the Program Files folder, directory on the original drive Setup performs a number of other things. It will make hundreds of changes to the registry, install many libraries and sign them and put some files in the Windows directory itself.

    Also, if the version of Office that was on the old computer came with the PC, it's more likely to be an OEM license. As such, it cannot be installed or run on the new computer as a limitation of the original end user license agreement.

  • Can not find the file init for the database instance

    I have installed Oracle 10 g under Linux CentOS, run netca to create listener.ora and tnsnames.ora files, then I run dbca to create the myodb database and orcl instance.



    Now when I run dbstart, in the boot log, that it is said that he could not find the file orcl example init. so that the database myodb, he says:

    < em > / oracle/product/10.2.0/db_1/bin/dbstart: database instance "myodb' hot began.





    < /em > my questions:



    1. why it is said when I run dbstart both myodb & orcl are instances of database, I created myodb as the General database, while orcl corresponds to the instance, here it says:

    instance of < em > data treatment "orcl": journal file /oracle/product/10.2.0/db_1/startup.log

    Database instance "myodb' of treatment: save the /oracle/product/10.2.0/db_1/startup.log file



    < /em > is the name of the General database is considered an instance itself and can be used alternatively with the instance of word?



    2 when I created the database using dbca, I made the password for users of SYSTEM & SYS.



    When I try to connect to sqlplus using the system/mypassword, here it says:



    < strong > < em > ORA-01034: ORACLE is not available

    ORA-27101: shared memory realm does not exist

    Linux error: 2: no such file or directory < /em > < / strong >



    3. the database myodb started but it is not mentioned in my tnsnames file or the listener, while one mentioned is orcl has not begun, how is it? I know I'm missing a dir for /orcl in/oracle/home/admin, something that we find for the myodb, where there is/oracle/home/admin/myodb/pfile/init file.



    How can I fix this?



    4. What is the use of the command sql, < strong > edit < facilities > system registry, told me in another thread to connect to an idle instance with sqlplus and run this command, here what I got:



    < em > ERROR on line 1:

    ORA-01034: ORACLE not available



    < /em > 5 - can I just rely on the name of the General database and forget the thing of the Forum? I'm just confused about the difference and do not know how the orcl instance was created, it has not been created with dbca, because when I run dbca he says it's already there, create another instance, so I commented the sid parameter and now I amn't during its creation and how to retrieve its files if I need to re - create it again.



    Note: it is located in the bash_profile as $ORACLE_SID = orcl, why it's the only game, while General MYODB database name is not set, can be there rather than on the instance or SID in the bash_profile?





    Sorry for the many questions, this is the thing of the instance and their related discipline, I appreciate your help.



    Thanks in advance.




    If you have only 1 instance "orcl" then the oratab file should have only 1 entry - only for "orcl". Along, only one instance "myodb" {with the db_name "myodb"} must be started.
    The database Instance is identified by the SID - IE the ORACLE_SID.

    Normally, the SID and DB_NAME are the same - and they do like default value is the same when you run dbca. You have changed probably manually the db_name in dbca.

    If the listener is running on port 1521 and is started before the database instance, the database instance automatically saves with the listener. If the listener is started after the database instance, and then the command 'ALTER SYSTEM REGISTER' in the database instance indicates PMON to register with the listener.
    If you do not want to depend on the automatic check of the database with the listener instance, then you can include the information database (SID!) in the listener.ora. In addition, which would be caused if the listener is not on the default port 1521.

    See my posting in this thread: oracle sid and database the name of for more notes.

    A database can contain multiple schemas - each schema is a different database account. In other implementations of database (non-Oracle), what is called a "database", it is called a 'plan' in Oracle - but that is created as a database account. Database accounts are listed in DBA_USERS - if a user "owns" objects, it's a 'plan', otherwise, it is only a user. {Oracle also provides a CREATE SCHEMA command to create multiple objects in a single command.}

    Hemant K Collette
    http://hemantoracledba.blogspot.com

    Published by: Hemant K grapple on November 6, 2008 09:31
    corrected "orcl" to "myodb.

  • To access a medical database, a software print said I need now of TLS 1.1.  Printing the program says that if I get the good Lion 10.7.5 OX I should get the Safari 7.0 or higher with him.  I can't find the procedure to download Safari.

    Friends:

    I have a MacBook Pro - 2.3 GHz Intel Core i 5.  MEM at 1333 MHZ 4 GB DDR3.  My MAC OS X LIon is version 10.7.5.  MY current version of Safari is 6.1.6.

    I tried to connect to a medical/pharmacy/base database program and told me that I don't have a high enough version of TLS.  I have 1.0 and 1.1 is required.  The Lion of MAC OX 10.7.5 should have a version of Safari 7 that TLS 1.1 in - level items or can be upgraded to the level of TLS 1.1.  I looked at my app updates and do not find the update of Safari to 7.   No idea where in the system support or at the Apple retail I can get the update?  Thank you.

    Safari 7 is a very outdated version of Safari.

    Update of Safari, the only is to update your Mac to the new OS X El Capitan. Install it the latest Safari version 9.1.2.

    So see if your Mac can run El Capitan > update of OS X El Capitan - Apple Support

    An alternative would be to use the Firefox browser that still supports v10.7 > https://support.mozilla.org/en-US/kb/how-download-and-install-firefox-mac

  • Speed/performance of my mac mini (mid-2010) is very slow. Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.

    My mac mini (mid-2010) speed/performance is very slow - think of it as a result of letting my kids do "whatever" about it in recent years.  Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.  You will also need to get data out of old PowerBook G4.

    < object edited by host >

    We are users like you.  Search locally by using something like Yelp or similar

    http://www.Yelp.com/search?find_desc=Apple+repair & find_loc = Chicago, + IT & start = 0 & ortby = rating s

    or read a few links which may be relevant on this forum about the slow mac mini

    http://BFY.tw/5C63

  • We have 2010 550 5.7.1 exchange server client has no prmission to send that sender I get this error on Exchange pop3 accounts and account owa works fine

    Helloo...

    I have exchange server 2010 my all work fine, but since last week, my two not able to send mail to another domain I get customer error 550 5.7.1 doesn't have permission to send that sender ot 550 5.7.1 Unable to relay.

    I'm trying to make new Email id this two days well only after two days work I get to new same error.

    Thank you
    Ashok pal

    Hello

    Since you are facing problem with Exchnage Server 2010, it would be preferable to send the same in the Technet community for more help.

    http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

    Hope the information is useful

  • How do install trials of Photoshop/Lightroom creative cloud when I get this error message after two attempts of installation:-payload: package redistributable Microsoft Visual C++ 2012 (x 86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC}

    I'm not very technical and I'm unable to install Photoshop and Lightroom creative cloud of the trial.  This is the error message I get:

     ----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------  ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546  ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\User\AppData\Local\Temp\{F3C70951-72C4-4D73-80B1-A5B0C67EEEFE}\Photoshop_15_LS20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com  ------------------------------------------------------------------------------------- 

    I don't have an AppData folder in my folder users... the path is not correct in the aid response.  Can someone help me please? Thank you!

    You can also check out link below:

    https://forums.Adobe.com/thread/1845137

  • ORA-01206: the file is not part of this database

    I have a special case and asking if someone has dealt with something similar. I have 2 databases that have been cloned from the same database in 11.2.0.3, the source DB has a tablespace that is unimportant, I want to just drop in cloned databases, but when I went to the let down, I got the following error:
    UCV31 >select DBID,open_mode from v$database;
    
          DBID OPEN_MODE
    ---------- ------------------------------------------------------------
    2211912429 READ WRITE
    
    UCV31 >select file_name from dba_data_files where TABLESPACE_NAME='TEST1';
    
    FILE_NAME
    --------------------------------------------------------------------------------
    +GBS_FRA/test/test01.dbf
    
    
    UCV31 >select STATUS from dba_tablespaces where TABLESPACE_NAME='TEST1';
    
    STATUS
    ---------------------------
    ONLINE
    
    UCV31 >drop tablespace TEST1;
    drop tablespace TEST1
    *
    ERROR at line 1:
    ORA-01122: database file 148 failed verification check
    ORA-01110: data file 148: '+GBS_FRA/test/test01.dbf'
    ORA-01206: file is not part of this database - wrong database id
    So what I did was dump headers and header is indicating that the data file belongs to the second database
     V10 STYLE FILE HEADER:
            Compatibility Vsn = 186646528=0xb200000
            Db ID=4005607769=0xeec0b959, Db Name='UCQ1'
    Now if I go to the second database, I see that this tablespace is also online
    UCQ11 >select STATUS from dba_tablespaces where TABLESPACE_NAME='TEST1';
    
    STATUS
    ---------------------------
    ONLINE
    
    UCQ11 >select file_name from dba_data_files where TABLESPACE_NAME='TEST1';
    
    FILE_NAME
    --------------------------------------------------------------------------------
    +GBS_FRA/test/test01.dbf
    So before, has anyone saw something similar in where 2 databases where using the same data file, and how did you do you?

    I think drop the tablespace in UCQ1 then in UCV3, if UCV3 is perhaps already a corrupted database, but it is not a problem, I can restore this database from the source, I just want to see if someone has seen this before and how you solved

    Environment:
    DB: 11.2.0.3
    Grid: 11.2.0.3
    OS: Linux 2.6.18 x86_64 - 238.el5

    If you do not need data in your space, you can use:

    alter tablespace  offline;
    DROP TABLESPACE  ;
    
  • Help! I can't find the scroll bars in Word, Office 2010!

    Shortly after that I installed Office 2010, I was desperately trying to repair one imagine that I had added to my document, but somehow instead, I turned off scrollbars for windows! I tried to retrace my steps, but have no idea of what I did. The scroll bars are always present in all my other programs, but when I opened a Word document, new or old, there is no scroll bar. I have to use my arrows or previous page and page down to move through my documents. It's very embarrassing. Of course, I could use some help!

    Thank you!

    In the view tab of the dialog box Options (menu Tools - Options)
     
    --
    ..
    --
    "Ellen Ziff" wrote in message news: 4c7755b9-21f2-4687-845 c-889c4ab29079...
    > Shortly after I installed Office 2010 I desperately wanted to fix a
    > imagine that I had added to my document, but anyway instead
    > I turned off scrollbars for windows! I tried to retrace my steps
    > but have no idea of what I did. The scroll bars are always present in all my
    > other programs, but when I opened a Word document, new or old, it has no
    > scroll bars. I have to use my arrows or the page upward and down to move the page
    > around through my documents. It's very embarrassing. Of course, I could use
    > help!
    >
    > Thank you!
    >
     
     
  • When I try to open the 2010 Highway, I get this error: "your registry settings for this application no were not copied correctly."

    I am running Windows 7 Home Premium and use Microsoft Autoroute 2010. This used to open and run without any problem but now I get the message "your registry settings for this application were not copied correctly.  To correct these settings, restart the installation of this application where you originally installed it.  I did several times since the original disc without success.  I also did my best to remove all files of previous Highway before recharging.  Any help or suggestions please?

    original title: Highway 2010

    "Do right click used to contain run them as administrator but does not give the option now."

    The above is a bit worrying, does that apply to just highway or all the .exe?

    If you press the SHIFT key while you right click, if you see?

    Anyway have you tried to test with another Windows user to see if your profile is corrupt?

  • When I try to download a pdf file, I get this error message saying microsoft visual C++ Runtime Library program may Explorer\iexplore.exe DURATION must close in an unusual way

    I get the above error message when I try to download a pdf file to my player adobe, how to fix this?

    Thank you, Rick. (nagpie1 and malatel: this thread is only for Ricky63.) Please leave this thread and start your own son.)

    I see that you have Windows XP Home Edition, Service Pack 3 level. Ok. :-)
    Go to this page:
    Click the custom button. Wait a bit...
    If you have in fact all your patches security post-SP3 installed, then you will see this message:
    High priority updates

    No priority updates for your computer are available. To select other updates, use the options on the left.

    Can you confirm?
    In addition, do NOT choose to install the optional updates that are available! They are rarely necessary, and they often cause problems!
    Also, you need to let us know if you have the version the recent Adobe Reader or not. As I mentioned earlier, the current version is 10.1.3. If you run Adobe Reader and select "about...". "in the drop-down Help menu, you can see which version you are using.
    That being said...
    There has been a lot of recent reports with people having all kinds of problems with Adobe Reader. My recommendation is to uninstall, and then run the tool to remove here:
    Then, install a free PDF reader senior (and less of a problem):
  • I am trying to remove XP antispyware 2010 but can't find the executable file hidden in the applications folder. Any suggestions

    My system is xp

    Hello

    This site will help you to delete it all.

    Bleeping computer

    Looks like you do it manually, try the link, it should take care of everything.

    Hope this helps,

    Jim

  • Why do I get an error of the Visual C++ Runtime Library at the launch of Ulead Photoimpact

    This program, used to work on my computer, but now gives runtime error. It is a product of coral

    Contact the manufacturer for support maybe it is not compatible with windows or the source of emissions is corrupt

  • After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

    After the connection to my computer today and to go to Youtube, I get this error message on my screen.

    The assertion failed!

    Program:...
    File: common\npn_gate.ccp
    Online: 267

    Expression: pPluginShim

    I try to press abandonment and try again but nothing happen.

    Hi Shadwik,

    Thanks for the reply.
    I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
    After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
    After that my PC works fine.

Maybe you are looking for