Date and time changes when restart

Similar Questions

• IDS 4215 date and time change after restart

  Hello

  I am facing problem with cisco IDS 4215 (version 6.0), date and time of change in the device after reboot. What is the command to save the configuration. record or write mem does not work.

  Amarjeet Singh

  Once the date and time changes are applied Cisco IPS CLI, they should have been saved. No additional step of "savings" manually is necessary.

  Also, have you thought about Configure NTP on IPS server. IPS synchronizes time with NTP server, if there is no difference.

  I suggest you contact Cisco TAC and report the problem of equipment.

  Kind regards

  Sawan Gupta

• Date and time change on startup Vista Home Premium.

  Whenever I start the date and time have been changed to January 1, 2007; 12:01. therefore I can't access a secure site.

  If you set the right time, then the next time you turn it back on it has revenir la-dessus a change changed to 2007, read this:

  You probably have a failed in your motherboard CMOS battery.

  It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

  They cost about $5 to replace.

  http://www.computerhope.com/issues/ch000239.htm

  How to replace the CMOS battery in the above link info.

  See you soon.

  Mick Murphy - Microsoft partner

• date and time change 3 years ago without getting

  my Vista computer and a processor amd has changed the time and date of 3 years ago and stops at day etc. I put manually the time to correct the problem. This happened 3 times and made by himself. I checked my time synchronization to update the time automatically, but why my computer change the time at this earlier time? If others have this problem could you help me with this problem. I use kaspersky lab 2010 IPSec as well. This problem does not occur whenever I start my computer, but it did this morning, and I ask if there is a problem of security. Thanks for any help you can get.

  Probable reason: you save the battery is "turned".
  Please it in your maintenance of reliable computer rooms of new battery shop.

  t-4-2

• wildly incorrect date and time iPad - generated error message

  My son has a mini iPad and recently received a chrome error message, saying that his connection can not be deprived or suspected piracy activity. This avoids him to use chrome. I read on the forums that people with this error had fixed successfully it by checking that the iPad had the right date and time. When we went into settings to check for it, the date and the hour showed that on 2 May 1970 (?) It is currently only 23 April 2016, so I would say it's a little out of sync... When we try to manually set the date and time, that he jumps back between 1970 and 2038, but will NOT fix the correct date. We tried all means possible to work around this problem, but the problem persists. We are not technically competent, just frustrated end users. Someone at - it a preview? Thank you.

  There was this problem going around a few weeks where the user deliberately set their date to January 1, 1970 that their devices in brick. That looks like what happened to your son, however.

  If you have changed the date of May 1970 or earlier and cannot restart your iPhone, iPad or iPod touch - Apple Support

  Have you tried to change the date slowly moving upward a few years at a time? I know that can take some time, but it might be useful. A forced reboot might help as well.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo. After the reboot, you may be able to change the date to get chrome.

  If you can go back in Chrome, clear cookies and the data of the Web site. Press the 3 points in the top right of the toolbar of the browser and the. Select settings at the bottom of the window. From there, tap the privacy in the next window, you will be able to erase the data.

  

• 8600 OfficeJet pro date and time

  The control panel on my new shows HPOfficeJet pro 8600 Jan 00 00 0000 has.  How can I configure date and time for the fax of today? I can't find anything in the online User Guide or anywhere else.

  Hi bodogplf,

  I understand that you want to change the date and time on your Officejet Pro 8600.  To do this, since the home screen navigate to the second page by pressing the right arrow.  Here, you should see a button that says Setup.  Press setup and Search Preferences button.  Once you press the button Preferences the first option should be Date and time.  When you press this button, you can set your date and time which should appear on your Fax.

  If you have problems navigating the menus, re-post and I will help you.

  Thank you!

• Date and time of the blackBerry Smartphones

  Hey. I have the BlackBerry Curve 8520. I don't know why I can not reset the date and time. When I try I get this message: ECEPTION EXCEPTION INDEX - 1 > = 2

  What can I do? Can I reset the phone?

  Thank you

  E

  Do a simple reboot on the BlackBerry this way:

  With the BlackBerry powereddevice, remove the battery for a minute and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

  Now, try to set the time again.

• Changes of date and time when you go to the line

  On the date and time to start on the computer is fine.

  When I go to the line for a unknown reason date and time moves forward 12 hours. This happens not always as some time it will be presented one, two or three days without change.

  Very frustrating because it affects the majority of the applications where the date and time are referenced.

  I'm missing something in the settings of date and time.

  [Moved from the forum comments]

  Hello

  -What operating system is installed on the computer?

  If you have installed Windows 7, you can run this Microsoft Fixit and check if that helps.

  Difficulty of broken desktop shortcuts and common system maintenance tasks: http://support.microsoft.com/mats/system_maintenance_for_windows/?wa=wsignin1.0

  Additional information.

  Set the clock: http://windows.microsoft.com/en-in/windows7/set-the-clock

  Thank you.

• Date and time of changes every time when I turn on the computer.

  Why dose date computer and changes each time I turn it on time

  Original title: modification date and time of the computer

  Usually because the battery cmos is a failure

• BlackBerry Z10 Date and time restarts everytime I restart the device

  Hi guys! Im a new user of blacberry and my new Z10 is my 1st blackberry phone ever, it is a great phone and the device, but actually im affected by some technjcal issues or is these issues are considered normal the BB function? Sorry guys because im an android user before and its my first time to experience those issues on my z10 bb:

  #1 date and time always resets everytime I turn on my phone from turning off or restarting simply, is this normal on bb z10?

  #2 im experiencing a low autonomy (as an Android device im and I got nothing like before), it is as I finished charging my phone around 7:45 and used it with wifi on, viber and downloading applications, then around 22:15 58% remaining just after 2 and a half hours, here it normal on the life of the battery of the z10?

  #3 I have a little find the setting to change the default message and call ring tone, wherin I checked on youtube how on the video is on the framework of the notification of the settings, but when I checked it on my bb it shows not on exactly where I see on the video. IM on bb 10.2 is the latest version? Hoping for you guys to help me out, thank you in advance!

  Setting, Date & time - set your time zone, Auto update time zone - on

  Battery life improves after a week or two, but will probably exceed never 12 hours with BT and WiFi continuously on, I load all night.

  Each Contact can have a distinctive ring, Notifications, Contacts > customize to Contact (bottom)

  Global ringtone, Notifications, requests > phone > Tone - select the tone or browse music.

• Date and time system continues to change each time the system starts.

  I noticed that the time and date of my home PC gets changed every time the system is booted. The default date is set for Jan. 2008, when in fact it should be July 2014.

  Also, my PC became slow death. I use Windows 7 on 1 GB of RAM, 250 GB PC. I used last my home PC 2 years back, but there has always been someone to use it.

  It shows the OS disk to 7 GB of free, when in fact I never installed or anything unnecessary stored on the disk of BONE; Whatever unnecessary programs were there, I uninstalled them recently, keeping just a few essential ones. After uninstalling, it shows to 7 GB of free, when in fact it should be more than that.

  I use Avast anti-virus, which I think is unnecessary, that its not to protect my PC and as other programs, too, is quite dead slow.

  The system is infected by viruses? Manually, I checked the system for viruses and clean the system of all unnecessary and, program files, but I'm still not sure whether it is a virus or a PC problem.

  I am a COMPUTER analyst, and's just done it 2 days that I use my PC at home. I could format my PC, or where applicable be buy Windows 8 with a new processor.

  Please advise.

  Thank you and best regards,

  Ralph Davidson.

  Hello

  You really need a minimum of at least 2GBs of RAM to run Windows 7 well enough.

  As you have only 1 GB of RAM, which seems to be one of the reasons why it is slow.

  Increase the physical RAM or try ReadyBoost:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  Looks like you have some problems.

  Wrong Date/time

  If after you set the Date and time, and then stop and restart your machine and the time returns to the year 2008, and she did this whenever you reset, then restart the PC you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  ________________________________

  For hard disk space:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  And for general maintenance on your machine:

  You should have used Malwarebytes in previous advice here on hard drive

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary make mode safe mode with networking: AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Can I change the date and time on my account?

  Is there anywhere on this site where I can set the details of the date and time?

  When I posted a recent issue, the date and time were incorrect IE not my country date & time.

  Thank you

  Sylvia

  PS Sorry if this is the wrong place to post this question, not that the possibilities of passage are really there?

  The date and time are universally on us Pacific time zone. You can't change it.

• Date and time of change of batch

  Mac running El Capitan with the latest version of Photo

  When I try to batch change date and time on some old 50 photos that have been digitized on days different and downloaded in the library of my pictures the results aren't good. The days and hours can vary a lot.

  When I checked and changed a lot of photos that have been taken or analyzed the day everything seems to work fine. Why? Is there a simple work around?

  If you do not change the dates butare, added dates for digital photographs (Digital Photos do not have EXIF/IPTC data then do not use the control change time data - using the user script Script: batch change Date and time on a fixed Date )

  LN

• I want to change the file name format "save under" so the date and time are first.

  When I select a few emails and then select "Save as" to keep a copy on my computer, the name of the file that is created has the date and time at the end of the file name of the email.
  Sample "save under" file name: "Habitat Follow Up - Bryan ([email protected]) - 2011-11-15 0744.eml.
  Is it possible to change the structure or format of the file name if the date and time of the email are initially the file name?

  Try ImportExportTools and customize the format of the file name in the options.

  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

• Photos do not sort by time when the Date and time are adjusted

  I'm the combination of images of my friends with those friends, using Mac Photo of OS X V10.11.4. Because the dates of our cameras vary, I used "Image, set Date and time" to change the dates of the imported pictures. When the dates and times are adjusted, the photos are sorted by date no time. Added photos changed the given date are sorted at the end, regardless of time stamp. The sort options in the pictures leave much to be desired.

  Where are you seeing this? All the photos are sorted by date/time, the photo has been added to the library - Photos (years/collections/moments) are sorted by date/time pictures

  You can select the photos of interest and create your own album of them and then sort but title ascending or descending or by date

  LN