Date code picker in jsp

Similar Questions

• Data code

  Hello

  Just signed up and I hope I post this question in the right place.

  I just got a HDR-CX300. Of course, I'll want to transfer the video files on my computer. I need to have the date/time on the video code after I write it on a disk. My question is, will do PMB for me or I'll lose the data code during the transfer?
  I heard that PMB does not transfer them with video, only with pictures.

  If it isn't, recommendations on other software that will give me the time code on the video?

  Thanks in advance

  Jack

  ETA: not sure if it's important, but I am running WinXP SP3.

  Visit this link

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39790

  .

• Problem of lens date code

  Hi all! I hope someone could help me in the determination of the date of that my kit lens was manufactured. I "googled" all morning & searched these forums & others, without success. I bought my kit of 6 d 24-105 mm Canon last March 2014 & saved the boxes and all the paperwork, but see only a serial number of 8 digits on the lens & paperwork. The white box, it came in had the same numbers but this > (21) at the front of it. It makes me crazy! Am I missing something?

  It took some time for Canon to 'understand', but some photographers obsess how old or new is a lens. Some will measure where they won't buy a used is more than a couple of years. Thus, they abolished put on their lenses date codes maybe 2 years ago or not.

  Unless it has access to internal files canons that show serial number for each lens ranges as well as the dates they are made, there is no way to determine when a "new" lens was manufactured.

  And, for what it's worth, when I got to the EF-S-objectives, I remember seeing a code on any of them. Only Ls had codes of date as far as I know. My EF 85 F1, 8 2 years ago have a date code, either.

  And I don't like not my 80-200 f2.8L "magic drain" had been built in 93 rather 94 or when? Not a bit! It produces great images for a fraction of what a new 70-200 f2.8L brand I would have cost 3 years ago...

• JavaScript Date/Time Picker

  I'm looking for a decent cross browser javascript date/time picker popup function, but I can't seem to locate ONE that works on all browsers! Its frustrating infinite!
  
  Can anyone help?
  
  Preferably, please give me simple implementation details as well.
  
  Edit; More information;
  
  I found a few that only worked to a single Inbox on a single form. I have two text boxes, but they had to be of different forms or on different pages, which is not acceptable. I need to be able to have the popup to its return value for a single box, defined by the Augsburg at the launch of the window.
  
  

  http://www.dynarch.com/projects/calendar/ - calendar of the Cross-browser DHTML/JS;
  http://www.webtricks.com/downloads/CFDateSelectPopup.zip (or http://www.olimpo.ch/tmt/tag/datepicker/ for instructions and download)-calendar of CF custom tag.

  Also try
  http://www.dynamicdrive.com/dynamicindex7/index.html - a whole bunch of js calendars

• Help with date code

  SRY about that amount of lines of code... but I really need help...
  
  I have to insert into a table, the date as 12/10/2009 and time, like 22:34:12... but, when I select a date picker date and insert into a text field... the time I got this result:
  
  If the inserted date was 12/12/2009 time 22:34:12
  The result is... 12/12/0922 34:12:00 < < < < < s get just the number two last year and by inserting the two number first time in the year, as the year 0922...
  
  I m using a javascript source to create a date picker...
  
  and this is the procedure to insert in the table...
  
  
  
  PROCEDURE set_atendimento)
  p_id_chamado_atendimento IN chamado_atendimento.id_chamado_atendimento%TYPE,
  p_id_chamado IN chamado_atendimento.id_chamado%TYPE,
  p_informacao IN chamado_atendimento.informacao%TYPE,
  p_datahora_inicio IN chamado_atendimento.datahora_inicio%TYPE,
  p_datahora_fim IN chamado_atendimento.datahora_fim%TYPE,
  p_hora_inicio IN VARCHAR2,
  p_hora_fim in VARCHAR2
  )
  IS
  
  v_inicio DATE;
  v_fim DATE;
  
  BEGIN
  --
  v_inicio: = TO_DATE (TO_CHAR(p_datahora_inicio || p_hora_inicio), "DD/MM/YYYY HH24:MI:SS");
  v_fim: = TO_DATE (TO_CHAR(p_datahora_fim || p_hora_fim), "DD/MM/YYYY HH24:MI:SS");
  --
  UPDATE
  chamado_atendimento
  SET
  Informação = UPPER (p_informacao)
  WHERE
  id_chamado_atendimento = p_id_chamado_atendimento;
  IF SQL % NOTFOUND THEN
  INSERT INTO
  chamado_atendimento
  (id_chamado_atendimento, id_chamado, id_operador, datahora_inicio, datahora_fim, Informação)
  VALUES
  (SEQ_CHAMADO_ATENDIMENTO.nextval, p_id_chamado, pkg_operador.get_id_operador, v_inicio, v_fim, UPPER (p_informacao));
  END IF;
  --
  END;
  
  -------------
  
  
  Here's the JAVASCRIPT
  ------------
  
  
  < script language = "JavaScript" type = "text/JavaScript" >
  $(function() {})
  $. datepicker.setDefaults({)
  showOn: 'button ',.
  ButtonImageGadget: ' / i/themes/fwsac/includes/jquery/images/calendario.gif',
  buttonImageOnly: true,
  closeText: 'can ', he said.
  prevText: "< previous ',"
  nextText: ' Pr & oacute; ximo > ',
  currentText: "Hoje,"
  monthNames: ['Janeiro', 'February', 'March & eacute; o', 'April', 'May', 'June', 'July', 'August', 'September', 'October', 'November', 'December'],
  monthNamesShort: ['Jan', 'Feb', 'Mar', 'Abr', 'May', 'June', 'July', 'There are', 'Set', 'Out', 'November', 'December'],
  dayNames: ["Domingo","Segunda-feira ',' Ter & ccedil;"] [' a - feira ","Quarta-feira","Quinta-feira","Sexta-feira","Saturday"],
  dayNamesShort: ["Dom", "Seg", "Ter", 'Quality', 'Who', 'Sex', 'Sab'],
  dayNamesMin: ["Dom", "Seg", "Ter", 'Quality', 'Who', 'Sex', 'Sab'],
  dateFormat: dd/mm/yy"."
  firstDay: 0,
  isRTL: false,
  showAnim: "creep".
  });
  $('#P5004_DATAHORA_INICIO,_#P5004_DATAHORA_FIM').datepicker ({beforeShow: fdateRange});
  });
  function fdateRange (input) {}
  return {}
  minDate: (input.id == 'P5004_DATAHORA_FIM'? $("#P5004_DATAHORA_INICIO").datepicker ("getDate"): null);
  maxDate: (input.id == 'P5004_DATAHORA_INICIO'? $("#P5004_DATAHORA_FIM").datepicker ("getDate"): null)
  }
  };
  < /script >
  
  
  what I need to change to get the 4 digits of the year and all the numbers of the hour and the conca "|" with the date?
  
  can anyone help with this, pls?

  Hello again,

  Yes, maybe you need to change them all to varchar2. You work with 2 different types of data, trying to concatenate them and then convert them. I would start with them all the same.

  Don.

• timestamp of the record - file name or where to get a data code

  Hello

  Maybe more for a Sony camcorder forum, but someone here might know.

  Being an amateur, I like doing shorts holiday and children as they grow up. (currently using PP CS3)

  Currently, contemplating the purchase of a new camera (Sony CX700 or Canon HF G10) and move from HDV to AVCHD (and CS5.5) edition.  One of those little things that I enjoyed was the day I discovered a free download, HDV Split, which allowed to appoint forwarded records (files) be appointed when recording was shot. I found this extremely useful by putting a film as well as recordings made over a long period. I could see directly in the timeline when each shot was filmed. Nice.

  How this will work in the new world (without band)? I always have easy access to code data and the day where a video was shot?

  See you soon.

  Yes, in the metadata.

  

• Transmission of data from Flex to JSP

  I have an advanceddatagrid with some data in it. When I double click on a line of the advanceddatagrid I want to pass the values of the selected row in the grid of a JSP page and display those values there.

  Could someone please guide me on how to do this?

  Thank you

  You can do this either by assigning values to an ArrayCollection or XML RemoteObject, HTTPservice respectively collection to send data.

  If you want to use typed objects use the remote object method.

  Look for these docs DataAcess Flex ways.

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=data_intro_2.html

  If this post answers your question mark it as such.

  See you soon,.

  PRAD.

• Dreamweaver CS3 model-implementation to date "code error 3" (a solution)

  This error occurs when you update a model, and there is a file with a wrong path.

  It's weird, really. The site knows that the file is associated with the model that you are editing.

  But when you look at the file, you see that the path to the template is wrong.

  For example, my model is in {root} /site/webdocs/Templates/SomeTemplate.dwt.

  The correct path to the template in the file is/Templates/SomeTemplate.dwt,

  "webdocs" being the folder root for the files to be pushed on the web.

  Somehow, after you have moved things around, some files had the path to

  /WebDocs/Templates/SomeTemplate.dwt

  I don't know that I'm the one who screwed up of these files, but after that things are weird.

  Dreamweaver should say what files want to be updated by using the nameof the template.

  but will only actually the update if the file contains the path to this model.

  So, when I change the template and save it, DW asks if I want to update all the files.

  Then, he shows me a list of the files that will be updated. (It may be long).

  Come then 10 or 12 popups an error message saying:

  Invalid path: {root}/site/webdocs/webdocs/Templates/SomeTemplate.dwt

  The problems are the following:

  1. The message does not explain the real problem. Namely: some file has a reference
     to a model which has the same name, but which has a path not valid.
     
     
  2. It does not tell you what file has the wrong model number.
     Inspect each file to which reference the model, one by one, until find you them.
     
     
  3. The list of files that will be updated can be very long, but only 8 or 10
     shown at once and you may not copy this list.

  The best solution I found was to use the number of errors as a clue.

  Generally, the problem occurred because there was an orphan file in which

  files did not have the template applied to new - while the number of errors corresponding to the number

  files in this directory, which appeared in the update list.

  Going to that folder and open the file, I found that the page didn't look at right and that

  the model at the top of the HTML code path was indeed invalid. (The files that looked like

  a good /Templates/SomeTemplate.dwt at the top. Had those who were wrong

  /WebDocs/templates/SomeTemplate.dwt

  The manual solution: change > models > model apply to Page for each file.

  (Ambitious automated solution would have been to write a script to change the)

  paths in the problem files.)

  This means that the site is not defined correctly.  You should never see folder root of the server in your local files Panel.  Locally, the site root is the folder of the hard disk where your files are located, and your property.  Example: C:\YourSite\

  Root of your remote server directly must be defined in your remote server settings.  See screenshot.

  

  Following this model, your Local Site file might look like this:

  Site - yoursite (C:\YourSite)

  about.html

  contact.html

  index.html

  services.html

  Templates

                some_template.dwt

  + Images

  + Styles

  + Scripts

  + Fonts

  Nancy O.

• Set the date value pick for a component of Date of entry.

  Hello
  
  Am using jdeveloper 11.1.1.6.0
  
  I slipped and fell to choose Date and Date component.
  
  When my user selects the vale of the ChooseDate component, it must be included in the component of Date of entry.
  
  Could someone help me pls?
  
  Kind regards
  Prasad K T,.

  Hello

  Take a look at the property of chooseId: http://docs.oracle.com/cd/E23943_01/apirefs.1111/e12419/tagdoc/af_inputDate.html

  Frank

• date code sql

  Hi all
  I have a date like this
  ----------------------
  ENDDATE = NOVEMBER 30, 12 '
  STARTDATE = NOVEMBER 28, 12 '
  ------------------------
  If I say
  SELECT ENDDATE-STARTDATE FROM DUAL;
  It should show 2...
  Please give me the way...

  Try this...

  with xx as (
      select '28-NOV-12' sd, '30-NOV-12' ed from dual
  )
  select to_date(ed,'dd-MON-yy') - to_date(sd,'dd-MON-yy') from xx;
  

  gives

  o/p = 2
  

  Because you gave the ACE String entries, we have converted all first it to a format of valid Date and when we have taken together we get the number of days.

  Hope that helps,
  Vanessa B.

  Published by: Vanessa B 30 November 2012 13:08
  -added o/p

• Date Picker APEX 4.2 validation

  Hi all

  In our application, we created a date picker in the format below.

  1 the name of the article-> P1_ENG_DATE

  2. under settings-> Format mask-> fmDay, months GFMD, YYYY

  3. under default-> to_char (sysdate, ' fmDay, months GFMD, YYYY')

  4. once the application under the ar-ticle column loading Date that we can see the release date

  

  5 now if they choose to date picker application survey allows you to submit the form.

  6 but if they change the date manually i., e instead of Thursday, if we enter Wednesday, June 18,2015 while that submit the form she will the error ' error ORA-01861: literal does not match the format string "because they change from day.

  7. not only change the day, if change us on the wrong day, wrong Date and delete last two digits of the year we can see literal error problem.

  Methods:

  1. If we want to read only option date picker where we do.

  2. how to manage the validation of using Java date picker script & PL/SQL.

  Could you please help me with this request.

  Kind regards

  Sruthitamiri

  Hi Nanoo Tamiri,

  Sruthi Tamiri wrote:

  1. If we want to read only option date picker where we do.

  2. how to manage the validation of using Java date picker script & PL/SQL.

  The first thing: access the datepicker-> settings section element and value

  • See her-> when click on icon

  In the section of the element:

  • CSS classes to elements of HTML form-> apex_disabled
  • Attributes of the HTML Form element-> readonly = 'true '.

  This will force the user to select a date in the date only picker and avoid the mistakes of your format.

  The second point is not clear as to how you want to manage the validation of the datePicker using JavaScript / PL/SQL.

  I hope this helps!

  Kind regards

  Kiran

• DB2 code: today's date and the day to ORACLE function?

  Please help me to convert this code oracle...

  DB2 code:

  [code] ((Current date) - day (date (current date))) [/ code]

  I tried to use the functions of default in PL date timestamps, but it won't work. Help, please.

  As told by BluShadow and rp0428, you can execute the following statement:

  Select current_date, trunc(current_date,'MM')-1 day of double;

  The output will be today's date and the month last, last day.

• Select the list date picker on a single line - is this a bug?

  I use: Application Express 3.2.0.00.27
  
  Here is a bug? If so, how he reported so it will be fixed in a future version of APEX? If this is not the case, how can I do so it ends as I wish?
  
  1. create the blank page
  2. create html region
  3 create the 'select list' (start on new line - Yes... Span - line field - Yes, ColSpan - 1, 1)
  4. create the date picker component (start on new line - no,... On the ground - No, ColSpan - 1, length of line - 1)
  
  There will be other items displayed in columns more above what I just had create you above. I want the list of selection and the datePicker to show side by side on the same line, so I put the element selector to date on the same line in the same field as the selection list element.
  
  HOWEVER... the date picker eventually displayed in the selection list item (sort of), instead of next to it on the same line.
  
  Here is what I get:
  ...................... [Field selection list] Label date Picker
  Select label list
  ...................... [Date field Picker]
  
  Here's what I want:
  Select the list tag [field selection list] Date Picker [Date Picker field]
  
  Thank you
  Steve
  
  Published by: sskelton on August 3, 2009 11:01
  
  Published by: sskelton on August 3, 2009 11:02

  Hello

  Take a look at my first answer here: Re: problem with the position of the elements of can help you

  Andy

• HTML selector 5 of dates

  I couldn't understand how to send it to apple, so I'm just posting here.

  Apple is ever going to support HTML5 date code to show a date picker on screen for laptops and desktops? Why do we have standards if nobody follows them? Only two browsers seem to support this code. Was not bad enough for MS don't follow the Web standards in the past with IE it? HTML 5 has been long enough now that every browser should have the date picker now. His frustration when I do a Web Tutorial and see the datePicker on the tutorial, but not on my site simply because I use Safari instead of Chrome. I know that I can use Chrome, but the point is, all Web browsers should now support HTML5 and seems sure that Safari is not fully supporting HTML 5.

  I know that apple won't see this, but if there is an email to send to, please provide here.

  Thank you

  Send feedback to Apple. They will not respond, but at least know that there is a problem. If enough people send feedback, it can become the problem solved as soon as possible.

  Your comments

• TRUNC (date) want to make sure that I didn't miss something here!

  My query is due to go live to production, where it will run on all SUNDAYS in BI software to pick up the report based on the latest data of a week (Sunday last to last Saturday). For example, the query executed on September 29, 2013 "go get the report based on data from September 22, 2013 00:00:00 ' until September 28, 2013 23:59:59 '.

  I replaced the date code of irreversibly with the following text:

  -to test on my terminal: closed_date > = to_date('09/22/2013','MM/DD/YYYY') AND closed_date < (to_date (' 09/28/2013 ',' MM/DD/YYYY') + '1'-DAY interval)

  -replaced by the EC on production: closed_date > = closed_date TRUNC(sysdate-7) AND < (TRUNC(sysdate-1) + '1'-DAY interval)

  I want to just make sure I missed not anything here!

  Hello

  What you have posted will get data from the last 7 days, not including today, so if we do run on Sunday, September 29, it will get the data from the previous Sunday (22 September) through yesterday (28 September) inclusive.

  What happens if you need to run late?  For example, if the system is shut down on Sunday, and you need the report Monday?  If you run this query on Monday, September 30, it will include data from Monday, September 23 and Sunday, September 29.  You may not care about this possibility, or it is maybe exactly what you want, but if you want something that is committed to get the week Sunday - through-Saturday last, use

  WHERE closed_date > = TRUNC (SYSDATE + 1, 'IW') - 8

  AND closed_date<  trunc="" (sysdate="" +="" 1,="" 'iw')="" -="">

  It's including Sunday, Sept. 22 to Saturday September 28 when its run anytime during the week of Sunday, September 29 Saturday, October 5.

  It's not you NLS parameters.