Date system resets to 2002 after a stop during the night

Similar Questions

• My iPad stops during the night by himself after installing iOS 9.3.1

  Hello

  Since I started using crossed on iOS 9.3.1 with my iPad it seems to stop by himself at night and it takes a difficult start (button / stop + front button) to revive. How can I fix?

  Thank you, Pierre

  Hello boileaup,

  Thank you for using communities of Apple Support.

  I understand that your iPad is apparently power off or become unresponsive the next day.   As a first step, I suggest that you reinstall iOS by following the instructions below.

  1. Connect your device to a computer and open iTunes. If you don't have a computer, you can borrow one, or go to an Apple Store or service provider authorized Apple for help.
  2. When your device is connected, force it to restart. Press and hold buttons sleep/wake and Home at the same time. Don't release when you see the Apple logo. Keep now until you see the Recovery mode screen.
     
  3. When you have the ability to restore or update, choose update. iTunes will try to reinstall iOS without erasing your data.
     

  iTunes will download the software for your device. If it takes more than 15 minutes, your device will exit Recovery mode and you need to repeat steps 2 and 3.

  If your iPhone, iPad or iPod touch does not respond or won't turn on

  Have a good.

• My iPad Pro asks me to enter my Apple ID after a stop of the night.  This was not the case on my iPad Air.  What can I do to eliminate this step?

  I have looked through all the settings and can't find anything you need to stay connected to iClou.

  Tap settings > iTunes & App Stores and then press on your Apple ID then View Apple ID. Enter your password.

  Then restart your iPad and see if she asks your Apple ID even once. It should not.

• After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  Sounds like an Energy Saver preference, but what computer do you use?  A G5 (PowerPC) machine will not work on El Capitan.

• Cannot reset iPod classic after a fall on the cement.

  Cannot reset iPod classic after a fall on the cement. Said to contact apple with a face sad iPod.

  iPod classic 30 GB.

  Tried resetting and it said to contact Apple. The 'do not disconnect' flashed continuously until it empty the battery. An error code came to my office saying I had expelled irregularly. I had not ejected it.

  Any ideas?

  You may have damaged hard drive to the iPod (or other component).  You are able to put it in Disk Mode?

  Put the iPod in disk - Apple Support Mode

  If it passes in disc Mode, run iTunes on the computer and connect the iPod.  iTunes may ask you to do a restore with a message on the "recovery."  If you're OK with deletion of the iPod, tell iTunes to perform the restore.

  If it does not go in Disk Mode, or the restore fails, you have a hardware problem with the iPod hard drive.

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• My laptop loses its STARTUP information after it was closed during the night

  original title: STUMPER! My laptop loses its STARTUP information after it was closed during the night?

  I have a problem very intrigueing that I can't understand. I can do a clean install of Vista Ultimate(32 or 64 bit), on my gateway M285 - E Tablet PC. Once it's done and I did not yet updates, if I stop the system at night, I wake up and you try to boot the system and get a blue screen (which finally tells me that my "disk.sys" file is missing. I tried plugging it down in increments to see when this file, in fact, is lost. I stopped for about 1 1/2 hours and it will start fine, but during the night, it won't.

  Then I tried a fresh install and did all the updates available, same thing. I tried to start a "memory test and everything is fine." I even did the memory more intense test (which takes forever, by the way... lol). I also did "chkdsk", as well as all viruses and malware, etc. tests with Norton first Edition.

  I got to the point where I now have 3 separate "disk images" that I created to save time in my software I want to use this system of loading. We're just a clean install, that no update, other clean install available updates. and the last with a clean install with all my software MS Office, Adobe Creative Suite and Autodesk Entertainment and all of their updates.

  I did this for if I'll actually somehow solve this problem I can easily use the "disk image" I want... No...

  Oh yes, I also all my drivers up to date etc.

  Any help on this issue would be greatly appreciated.

  EDIT:

  Another problem related to this situation, it's the hard drive becomes undetectable, so I have to use a software such as Ubunta starting vehicle, which has its own operating system, so I can actually format my hard drive to start the installation process. (otherwise my Vista installation won the same recognize I have a hard drive, not to mention operating system to try to resolve, such as startup repair, System Restore, etc.)

  I finally figured it... xD is a hard drive diver who has been desgned for WinXP and for some reason any were never changed during the installation of Vista on this system or automatic updates.

  It was actually the IDE ATA/ATAPI controllers, specifically the Intel SATA AHCI Controller. I used "Driver Whiz/Detective", which would install most drivers via a base file system are integrated.

  The controller AHCI SATA Intel(r) has not, it only downloaded a .zip file that contains the following files:

  IaStor.sys
  iaAHCI.cat
  iaAHCI.inf

  These were to actually be manually installed. "Even if I had downloaded and extracted the files, when I tried to update the driver"Intel SATA AHCI controller"via Device Manager" through the command of newer driver search. It does not always detect it them, stating that I already had the best and latest drivers already installed.

  Then, for some reason that just kept on bothering me, because "Driver Whiz/Detective kept indicating that it was the best version of the driver for my system.

  So, I finally tried to update the drivers manually by specifying exactly where these files are located on my system. Then he finally recognized them and installed them.

  According to me, given that this system is an older model 'Gateway M285-E Tablet PC', even if it is Vista compatible, he has always maintained the operating system higher available for WinXP, through any auto detect in the BIOS. Even in the settings of the BIOS OS I tried assigning 'Other', because the only other options were Win95, Win98, WinMe, Win2000 and WinXP.

  So having not the 'Intel(r) SATA AHCI controller"recognizing a Vista OS after be closed for a period of time, it would try to load a Windows XP operating system, and have failed to do. Strange, but is the only explanation I can offer for her.

  Thanks for the help,

  Wayne

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• An order has been cancelled or stopped during the processing of multiple files

  I use Photoshop elements 13. I'll save the files from my camera on my desk. Upload photos, edit them, and then while trying to save the changes, I get an error message: "an order has been cancelled or stopped during the processing of multiple files. Continue with the next file or stop? "How I lost my job. a large part

  I was not able to find much about this error online then consulted for relief in this case.
  
  

  Thank you in advance!

  Partial solution.

  The problem occurs when the application is in the State 'restore down' (the middle between ____ and the X button). If I have the maximized application files do not delete.

  Just an info.

• Satellite A110-275 restarts after a stop on the current

  Hello

  After installing xp sp3 if I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  If I turn off the external power (or pull the power cable on) if the machine is running on its battery - then stop - everything works fine. I have checked the event logs and see no error which would cause a reboot on shutdown. I disabled the reboot on system error switch and I turned off the wake of the bios on the options.

  I also looked in Device Manager and off anything that could wake the machine after his stop (only found the modem). I am at a loss - I don't see why external power would cause the works to restart but battery very well. Finally its possible this safe mode can also not working after installed sp3.

  If anyone has any ideas - I'd appreciate really them. It looks like there may be a newer bios available (I'm on V1.2) but I've seen a few posts cautioned against an updated bios windows at level - once again any info - very very welcome.

  System information:
  Toshiba Satellite - A110-275
  Windows XP pro - sp3

  > After installing xp sp3 so I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  Have you noticed this problem before installing SP3?

  Its strange noises that this occurs only when the laptop is connected to the power adapter

  I searched in the forum for similar issues and in many cases enabled Wake up on LAN would cause a reboot.
  I know, you have this disabled in BIOS, but you should also check the LAN card properties in Device Manager.
  You will find an Advanced tab can disable this option too!

  Satellite A110-275 belongs to the series of PSAB0E.
  There is a new BIOS for PSAB0E series.

  BIOS v2.0 is OS independent. Means that he s created for Win XP and other OS.
  V5.40 BIOS is only for Vista OS.

  If you are using Win XP, then you should take the independent BIOS of the OS!

  Here you can find details of the update to the BIOS:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

• After a crash during the installation of Captivate, the installer does not "initialize" and the installation process stops. Any suggestion?

  I bought a few days ago from "Captivate". I received the Web address to download the program and the activation number. I downloaded the program (OK), began the installation program (OK) and has received indications that the decompression process was OK. Then the installation has begun, and I was asked to introduce the activation number (OK). After that, a bar showing the progress of the installation was shown on the screen. The bar stops at 2%. I waited more than 20 minutes and not seen any progress. So I decided to start the "task manager" to see if the process was active. I have windows 7, so I pressed ctrl-alt-del and the message (2-5 min later) who was not able to start the Task Manager. I waited longer (more than 1 hour), and since the progress of the installation the indicator was still 2% and I still couldn't activate the Task Manager, I restarted the computer.

  I then tried to reinstall the program. After unpacking, I get the message: "could not initialize installation. Please download Adobe support advisor to detect the problem. I followed the link to find out that the program is no longer available.

  What should I do?

  Hello

  Please follow the steps down below.

  • Disable the startup items. (Ms config)
  • Rename the the below mentioned location OOBE folder.
  • Windows: C > Program files or program (x 86) > common files > Adobe > OOBE and rename the folder in OOBE as (OOBE_old).
  • Uninstall Adobe Captivate 8 components manually from the machine. Manually remove all the files Adobe Captivate and records. You can check the following locations.

  o C:\Program Files\Adobe

  o C:\Program Files\Common Files\Adobe

  o C:\Program Files\Common Macrovision Shared

  o C:\Program Files (x 86) \Adobe*

  o C:\Program Files (x 86) \Common Files\Adobe *.

  o C:\Program Files (x 86) \Common Files\Macrovision shared

  o C:\ProgramData\Adobe*

  o C:\ProgramData\FLEXnet

  o C:\Users\\AppData\Roaming\Adobe*

  o C:\Users\\AppData\Roaming\com.adobe.*

  o C:\Users\\AppData\Local\Adobe*

  o C:\Users\\AppData\LocalLow\Adobe*

  o C:\Users\\AppData\Local\VirtualStore\Program Files\Common Adobe

  • Create a new user account that has admin on her rights.
  • Restart the computer.
  • Connection to a user account.
  • Once you are connected, and then try to install it again.

  Kind regards

  Rajeev.

• Vista will not be stopped during the update of Windows (see details)

  Reference Dell XPS420, 4 MB of RAM, two 1 GB WD HD, Windows Vista Home Premium, updated with all updates important to Microsoft.

  When I tried to install the latest updates (24 November 2009) using update installs and closes down your Vista computer got as far as "Shutting Down", but does not yet - icon turns on the screen of teal'c circle (or whatever color that is) and there are some HD activity , but that's all. Vista (and the PC itself) was working fine up until this point.

  Hi Casey785,

  Welcome to the Microsoft answers site.

  Step 1: Run (Checksur.exe) system update readiness tool

  Download and run (Checksur.exe) system update readiness tool. After downloading this tool, it runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  For more information about how to download and run the system update readiness tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821 Description of the system update tool for Windows Vista and Windows Server 2008: http://support.microsoft.com/kb/947821

  Article 947821, scroll down to the "Microsoft Download Center" section and then click on the link to download the update for your operating system preparation tool

  Step 2: Reset the Windows Update components

  You will need to maybe reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link:

  How to reset the Windows Update components? : http://support.microsoft.com/kb/971058

  These steps should solve the problem, give it a try and check if you are able to perform windows updates.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 BSOD after accidental shutdown during the update

  Stop computer accidentally during the update of windows. Now computer stuck in a loop of startup blue screen. Safe mode and windows recovery all lead to the blue screen. I don't have a recovery disk. What should I do?

  Hello

  According to the description of the problem, your computer is stuck in blue screen loop. So, I suggest you to create installation media by following the steps described in the article mentioned below and after that try to run automatic reapir.

  Download Windows 7 Disk Images (ISO files)

  After you create the Bootable USB key, change the boot priority and set it to USB. If you are unsure it is advisable to contact manufacturer FRO even. After changing the boot priority is trying to start your computer by using the bootable USB key.

  To run the repair to start the Windows recovery environment (WinRE), follow these steps:

  • Insert the Windows installation disc in the disc drive, and then start the computer.
  • When the message press any key to start from the CD or DVD is displayed, press a key.
  • If your PC does not automatically detect the media
  • When the computer reboots, read on screen for instructions that explain how to interrupt normal startup and access the basic input/output system (BIOS) configuration utility. Most PCs use the F2, F10, ESC or del key to start the configuration of the BIOS.
  • Looking for a tab in the BIOS configuration utility that is labeled boot order, The Options of Bootor Boot. By following the instructions on the screen, use the arrow keys to go to the boot order, and then press ENTER.
  • Locate the flash USB, DVD or CD player (this could be called removable device) in the startup list. By following the instructions on the screen, use the arrow keys to move the drive to the top so that it appears first in the startup list. Press ENTER. The startup command sequence is now changed to boot from the flash drive, CD, DVD, or USB.
  • Press F10 to save your changes and exit the BIOS Setup utility. Select Yes in the confirmation window. The PC will restart.
  • Select a language, a time and a currency, a keyboard or input method, and then click Next.
  • Click on repair your computer.
  • In the System Recovery Options dialog box, select the drive of your Windows installation, and then click Next.
  • In the System Recovery Options dialog box, click on repair your computer.
  • Click the operating system you want to repair, and then click Next.
  • In the System Recovery Options dialog box, click Startup Repair.

  For more information about System Recovery Options, see What are the system recovery options in Windows?

  For more information about the Startup Repair, see Startup Repair: frequently asked questions.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• FF reset does not removal icon tools during the restart. Any ideas?

  After you configure my toolbar with the new menu on the toolbar, it keeps removing most of the icons during the restart. Not even for the menu, but remove them completely for the big bin of unused features to the left of the mode menu customize. I have reset Firefox by the suggestion of support page, but this had no effect. Oddly enough, I didn't this problem after upgrading to version 30 on my laptop, only on my desktop. Any suggestions? I'm on a Mac Pro, running the Mavericks.

  The current releases of Firefox store customization of the toolbar in the browser.uiCustomization.state preference.
  You can review and edit the prefs Subject: config page.

  • http://KB.mozillazine.org/about:config

  You can check for problems with preferences.

  Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

• Satellite X 200-F stops during the game

  Hi guys,.

  I am a happy owner of a beautiful X 200-F for almost a year, and never had any problems with it.

  Last night, I was playing a heavy 3d game in the night in a room at near 30 ° C (we do not have a lot of conditioners of Air in France, it is not so hot, usually).
  So after an hour or 2 of battle in my laptop forged Alliance made a stop itself instantly, and it was because of overheating.
  I would make an egg on the back cover if I wanted :D

  I confess that I was playing in my bed, and it's not the best to do in summer, but I just want to know what is the critical temperature of the GPU that trigger the hard stop?
  And the temp of the CPU max?

  I checked & do all my usual test I didn't lose any performance of these two CPU & GPU.

  Thanks to new Toshiba laptop robust I'll be more careful next time ^^

  And thanks for your replies,

  Grettings from France

  Best regards

  Davith

  Hello

  Ok. It was a hot day, you've played the game of high performance, and you used the laptop in bed

  Good boyfriend I don't wonder that your laptop overheats and shuts automatically.

  First of all you shouldn't t use the laptop in bed, as this is very dangerous for the material of the laptops. Cooling modules may not work correctly if the vents are blocked and there is no air circulation.

  Secondly the phone automatically stops to avoid internal parts such as the CPU or GPU from damage.
  The high internal temperature can lead to hardware failure, so my advice is very simple

  Don t use the laptop in bed, but still on the table. Also, check that there is enough free space around the laptop. It is important to make sure that air can circulate properly.

  See you soon