Date/time format not work server

Similar Questions

• EL Capitan automatic date time does not work

  People

  I use an El Capitan 10.11.5 MacBook Air version.

  I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.

  I ran these commands on a terminal

  $ping-c 5 time.asia.apple.com

  Ping: impossible to solve the time.asia.apple.com: Unknown host

  $ping-c 5 time.nist.gov

  PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes

  64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms

  64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms

  tell me ping works but not for the server ntp - time.asia.apple.com

  $nslookup time.asia.apple.com

  Server: 192.168.1.254 address: 192.168.1.254 #53

  Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.

  time - ios.g.aaplimg.com canonical name = site time.apple.com.

  Site Time.Apple.com canonical name = time - osx.g.aaplimg.com

  $cat /etc/ntp.conf

  Server time.asia.apple.com.

  $ ntpq Pei

  No returned ID association

  Please, back up all data.

  Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:

  8.8.8.8

  8.8.4.4

  It's Google DNS. Click OK, and then apply.

  In Safari, select

  ▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data

  and confirm. If you use another browser, clear the cache memory. Test. Any difference?

  Notes:

  1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.

  2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• Date/time format and different regions

  I'm developing an application in this case to the United States on the English LV2009 software.  This application will be installed in many parts of the world, and I just discovered a problem with the date and time that I try to understand.  A screenshot of the application running on a Chinese computer is attached.  At the top right there is a 'results save location' which has a month and year added file name.  I use the date/time format with modifiers for the name of the month and the year in 4 digits (%B %Y).  On my PC, it displays in July 2010, but on Chinese computer it 7 01.  In addition, the reason that it says wrong serial number is that I compare the SN 2-digit year, and it seems to enter it correctly.

  On my PC, I tried to change my date settings in Windows and it doesn't seem to affect the production, as it does on Chinese computer.  I know there is a UTC Boolean selector which can be activated.  That will make a difference in the way that the date is displayed by this function?

  This is one of the few issues I encountered when developing a program for several regions, but it is currently the only one, I have not yet solved.

  I would expect month name to be specific langauge.

  For example, the word April in French is April and is abbreviated Apr. I would use a number instead of the name.

  The thai calendar + 543 years compared to the Western calendar, so a PC Thai could show a specific locale of 2553-07-13 date. Your computer may display 13/07/2010. I'm sure that the year of the Chinese calendar is different from that of the Western calendar.

  Using UTC should force LabVIEW to use the Gregorian calendar, based on the ISO-8601standard.

  Because your users work with technology and would probably recognize a Gregorian day/month/year combo I would stick with % Y_ m_ % d. % and UTC = TRUE.

  I contributed a VI to the community OR that you could use if you wish. It has many options and is based on ISO-8601

  .

  http://decibel.NI.com/content/docs/doc-7199

• changing dynamic date/time format

  How can I set a Date/time format) of a textbox (behave like a phone number format, where the user enters only numbers, but it shows another way of my choice.)

  Download the new Date object
  var a = event.target.value;

  Kai var = util.scand ("YYYYMMDD", a);

  
  dd/mm/yyyy format
  xDate var = util.printd ("yyyy/mm/dd", anyway);

  Event.Target.Value = xDate;

  It does not work.

  Text type fields have scripts that control the key sequence, validation and formatting. You only play with the formatting.

  You could create a script to strike to allow the entry of the date with or without the "/" but you then have to write a script of presentation and validation. Posting date is not just month 1-12 and day 1-31, because some months have 28, 29, 30 or 31 days depending on the month and year combinations.

• Tap to talk time does not work on my watch

  Hey guys!

  Tap to talk time does not work on my watch.

  I know that his works only with Mickey/minnie.

  the watch is after unpari/pair, the "tap to speek" function is enabled (on the iphone and the watch)

  both are updated to the latest ios/watch OS and still...

  any ideas...?

  Thank you!

  Return on investment

  Hi King

  I suggest to wait until a few hours, leaving the face of Mickey or Minnie Mouse selected on your watch.

  My own experience (tested on two watches) is that the feature became available after waiting, without rebooting or unpairing / rematching of the watch. In one case, it took somewhere 3-5 hours, but you can see that the function starts working sooner than that.

  It can help to first turn the tap to set the time to stop, pause for a few moments and then turn it back on again.

• Face time does not work since this morning if my wifi connection is fine and parameters also very well.

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  Mamimisra wrote:

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  https://support.Apple.com/en-us/HT204168

• "Show my windows and tabs from last time ' does not work in version 3.6.8

  I select "show my windows and tabs from last time ' on the Options window - Panel general"when firefox starts", but it opens as my home page every time I start firefox.

  I tried this on two different computers. Both of them have the same problem.

  It worked fine in previous versions, but it does not work in version 3.6.8.

  If you use delete, search and download Firefox browsing history in Firefox 3.5 and later versions to clear the 'browsing history' the closing of Firefox then in restaurant tabs in the last session ("Save and exit" or "show my windows and tabs from last time ') does not work.

• Downloaded 5 times do not work?

  Downloaded 5 times do not work?

  Downloaded what?  Also, did you install it?  On what operating system?

• Smartphones blackBerry 9900 data Plan does not work!

  Hi, new here, great site!

  I'm from Canada, with Koodo and bought a unlocked 9900 opportunity, my neighbor via a Classifieds site, and as much as I know it was his business phone.
  I wiped it it clean and improved the operating system to 7.01

  I noticed that the previous service logo remains still (Rogers) during boot-up/shutdown, hmm, OK whatever he is working with Koodo.

  I called Koodo to allow data, but nothing works. I called them and they told me to enter "bb.koodo.com" in the APN field with no username and password. Then to save the host Routing Table (he told me that he registered very well) but I did not receive a message. Also, we have removed battery and tried everything again. It still does not.

  It is H + at the top right of the screen, but who has always been there.

  She said that maybe the phone was restriction IP since I bought it used, and maybe BB Swiss Army tool could help me get off, but she didn't know how. So I downloaded and pushed some buttons (more precisely remove COD) and really messed up my phone... lol

  Just reinstalled OS7.01 once again and fortunately had a fairly recent backup.

  Suggestions for making data work, or do I need a new phone?

  Hello and welcome to the community!

  Serious9900 wrote:

  bought an unlocked 9900 used my neighbor via a Classifieds site, and AFAIK it was his business phone.

  Let's start there, because who can be tricky depending on what exactly is meant by "business phone". Reference:

  • Article ID: KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

  Many of the steps can only be carried out by the seller... for example, if the prior carrier still has a BIS account allocated to that specific device, so no other carrier will be able to create a BIS account for her, and a BIS account is required to use wisely. As a general rule, a carrier will come out only the BB from the account when the real account holder made the request... and you will not if this situation applies.

  In addition, if the device has been activated BES, you need to follow additional steps. Reference:

  • Article ID: KB30076 How to check for an it on a BlackBerry smartphone policy

  If there is an IT strategy, then there are a special method, you need to remove it, but it will be successful if the BES server, to which the device has been set already has the removed feature of it... you may need to ask the previous owner about it. If this BES server was deleted, you can use this method to clean up the it policy:

  • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  It is necessary to use this exact method... refer:

  • Article ID: KB16307 Actions performed by the BlackBerry smartphone during the removal of the user stored and application data

  Now, with all these preliminaries of the road...

  Serious9900 wrote:

  I noticed that the previous service logo remains still (Rogers) during boot-up/shutdown, hmm, OK whatever he is working with Koodo.

  As you guessed, it's irrelevant. BBs are still originally designed for a specific carrier... and some of these contractual carriers with BB to place a splash screen of starting the device ROM, that can never be changed. But, it does nothing other that that unit was built for this carrier... but as long as all other things correctly, it is not serious at all.

  But, to be clear, when you say "it works on Koodo", I guess that's your voice services? And are all now, you must operate your data services? If telephone services do not work correctly on Koodo, then it is useless trying to get data services going.

  Serious9900 wrote:

  I called Koodo to allow data, but nothing works. I called them and they told me to enter "bb.koodo.com" in the APN field with no username and password. Then to save the host Routing Table (he told me that he registered very well) but I did not receive a message. Also, we have removed battery and tried everything again. It still does not.

  But now say you "nothing works"... should I continue to assume this are information specific to the data, and that telephone services continue to operate properly on Koodo? Sorry for being blunt, but clarity is critical or waste us time on unnecessary things.

  When you say "he told me that he registered very well", which means exactly please? This means that he said something like 'Check pending', 'Record sent' or some other message popup? Once again, here the clarity is critical. If that's what you saw, then indeed it is not registered correctly. Rather, he made the application very well... but until the enrollment message arrives in the Messages application, then the intervention is required since the data network of the carrier did not and until it nothing for the data will be working.

  Serious9900 wrote:

  It is H + at the top right of the screen, but who has always been there.

  Upper case H +? Once again, just double check, since if she was tiny, that it would mean something completely different from that of capital letters. Top of case, this is what it must be.

  Serious9900 wrote:

  She said that perhaps the phone restriction IP since I bought it used

  I don't know what she thought about it. May be restriction of BES and if the above process I gave you can purify that.

  Serious9900 wrote:
  and that maybe BB Swiss Army tool could help me to remove, but she didn't know how. So I downloaded and pushed some buttons (more precisely remove COD) and really messed up my phone... lol

  Never good to a few buttons when you don't know what you do... I don't remember if BBSAK is able to remove political or not, but it can do a very good cleaning.

  Serious9900 wrote:

  Just reinstalled OS7.01 once again and fortunately had a fairly recent backup.

  And that could be part of your problems. If, for example, the device has one IT political edge, while part of a full process... which means that even if you happen to clean off, a complete restoration simply will return to the instrument, turning to your right back to where you started backup/restore. Instead, to do only a partial backup or restore, and more precisely to avoid data bases that have to do with THIS, political, business or something similar... the conservative approach is to only to backup/restore of critical databases you need (for example, contacts, calendar) and manually reconfigure the rest. Remove a policy is a tricky thing.

  Serious9900 wrote:

  Suggestions for making data work, or do I need a new phone?

  I think you have enough to start on top. Another question about whether Koodo, however, is if their network is configured to auto-fill your specific with entries HRT device model and service book. If their network is not, while actually explains everything. No carriers configure their network to support all models of BB... each one chooses a subset of the model numbers of BB and configure their network accordingly. But trying to use a model number BB on a carrier network that is NOT configured for this model results in number exactly what you live... their network will not automatically grow some HRT and SB entries on your device because their network does not recognize your device as a model BB number taken in charge.

  Looking at a reference that I can find, it seems that Koodo is configured for the 9360, 9300, 8530 and 9790. But not for the 9900. Now, is that with a proverbial grain of salt... that reference does not necessarily mean that the network of Koodo is not configured for the 9900, it's just an indicator that is not. Koodo can only tell you that answer for you.

  Good luck and let us know!

• Family timer does not work for Windows 8

  I can view the activity report and check the websites visited, but everything doesn't seem to work properly.  The time settings and the curfew does not work and when I view the reports using pc is far from what is used.

  Hello

  I would like to you can check this post about delays on parental control. Refer to the post of Eugene_R.

  Time does not

  Moreover, in a resolution of the initial problem, I suggest that reconfigure you the account user. Here's how:

  In Windows 8, you can use accounts of Microsoft as a user. You just link the Microsoft e-mail account to the new standard user. Follow these steps:

  Note: Make sure that you have an internet connection to create a user with a Microsoft account.

  1. press Windows key on your keyboard to access the applications screen.

  2. tap create an account (you will be redirected to search application screen automatically).

  3. click on settings (second option with the gear icon).

  4. click on create an account on the selection to the left pane. (You may be prompted for access admin select an admin user, and then enter the administrator password).

  5. in the account management window, click Add a user account.

  6. you will be prompted to add a user, enter the Microsoft account email address in the text box then click on Next.

  7. check This is a child account? Turn on family safety for PC usage reports.

  8. click on Finish.

  After you create the child account, you can then go to the Family Safety website, log in using the parent account and then manage restrictions and control of your child options.

  Second: In case you want your child free of any restriction which actually an adult account, you will need to just make sure that he or she is not a member of the safety of your family to check on the Family Safety website. To remove a child, go to manage the list of the members of the family. Select the account you want to delete by checking the box on the right, click on remove, then confirm by clicking on remove again.

  In case you have problems after deleting the account as a child, please update the personal data of the account by connecting to https://account.live.com/summarypage.aspx.

  Note: If you are currently logged in using your account, you must open a session and re-enter your child's account.

  Thank you.

• Timer does not work

  Hi all
  I want to help with Scheduler, case is:
  the database is installed for the first time when the local database in the normal calendar.
  the server is in hijri,
  When I create a work schedule do not work when the next execution is delivered.
  Help, please

  Checking the job_queue_processes parameter system. It must be non-zero.
  In SQL * more

  show parameter job_queue_processes
  

  to set the use

  ALTER SYSTEM SET job_queue_processes= scope=both; 
  

• Application roles data filters did not work

  I put filters data for the role of BIConsumer by default, but it did not work.

  Hello

  Default administrator can access all tables/columns presentation. In other words, only users not in the administrator group can be restricted permission for this configuration. That is why the weblogic user is able to see the object limits. Try to create a new user without privilege BIAdministrator and find the table of 'Time', your setting will work for sure.

  Rgds,
  DpKa

• Date & time format to_timestamp

  Hello
  
  I struggled for a while now with the time format. It seems to be interpreted as a date as well. I just want it to be like in the original (with the difference
  that date should be dd/mm/yyyy.
  
  
  -original format 0307 10/14/2009
  
  Select to_timestamp (substr (ALLTEXT, 84.14), ' YYYY/MM/DDHH24MI') AS DATEOFCRE
  of csv_euro
  WHERE
  substr (ALLTEXT, 6.2) = "HH." -HEADER
  
  -result 14 October 09 03.07.00.000000000
  
  You can see that the time becomes something weird like 03.07.00.000000000. that is not really what I'm looking for. I'm looking for 0307.
  
  can someone help me with this problem?

  If you want to insert it in a date field, you must convert it to a date

  INSERT INTO EUROHEADER(
  DATEOFCRE
  )
  select to_date(substr(ALLTEXT, 84,14) , 'YYYY/MM/DDHH24MI')
  from csv_euro
  WHERE
  substr(ALLTEXT, 6,2) = 'HH'; 
  

  You get errors in your example, because your database's default date format does not match the string that extract you from your csv_euro.

  Concerning
  Marcus

  Edited by: Marwim the 03.12.2009 13:50

• Toshiba 40TL838 - sleep timer does not work or works sometimes

  Hello

  I bought 40TL838 TV
  and I have problem with sleep clock

  does not work or works sometimes
  but usually, you see on the screen a minute left and TV never turn off

  I try to change the language and also options the system reset does not help

  and updated firmware is up to date

  any suggestion or help please

  I do not know if you are on the right forum because this forum is for Toshiba computers but let's see if anyone with the same device can help m.

  I put t know what the problem is here, but how it works you can read on page 48 in manuals s document.

  By the way: have you tried to contact Toshiba hotline and ask for help?