DB 12 c on the Oracle Linux 7.1 installation problem

Hello

I have installation problems of database 12 c on Oracle Linux 7.1, this is what I did and what is the result:

Steps done in order:

  1. Configure a machine virtual box OL7.1 (has enough swap space, is fully updated and invited additions running)
  2. Install the package "oracle-RDBMS-server-12cR1-preinstall" to make sure that I have all the packages required pre
  3. Followed the additional configuration steps in this tutorial oracle-www.m-base.org/Sounds.html (permissive-selinux, exports .bash_profile, create the installation path, create users and groups required)-> https://oracle-base.com/articles/12c/oracle-db-12cr1-installation-on-oracle-linux-7#additional_setup
  4. Obtained by runInstaller installation and chose to install database software ONLY.
  5. Run the root.sh as root script, after that the installation was successful
  6. DBCA: Create database, mode, advanced, general use create as CBD (an APB called pdb1), EM express (Yes), rather than default storage settings, install the schema example, character set AL32UTF8, by default all the rest.
  7. Edit the/etc/oratab file by changing the N a y at the end of the last line that is now "data1:/u01/app/oracle/product/12.1.0.2/db_1:Y".
  8. sqlplus sys/oracle as a sysdba

I'm stuck at 8, it's the following message is displayed:

ERROR:

ORA-01034: ORACLE not available

ORA-27101: shared memory realm does not exist

Linux-x86_64 error: 2: no such file or directory

Additional information: 3640

Additional information: 1543399787

Process ID: 0

Session IDs: serial number 0: 0

I studied him that changing the/etc/file hosts to remove all the duplicate names could fix this error, then here is this that my/etc/hosts looks like:

cat/etc/hosts

127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

: 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

Before I change anything, I would like to help, can someone go get where I left and gives me a step to ensure that this facility is set up correctly?

I missed something?

Comments are welcome!

Your 7 step refers to an instance called data1, but you set your ORSCLE_SID to the cdb1. THERY can't be correct.

Tags: Database

Similar Questions

  • The Oracle Linux 5.10 ADR 11.1.1.6.0 installation problem

    People,

    Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

    I need to create the web page application online for future student to apply for admission.

    My installations of PeopleSoft are below:

    Server machine: Oracle Linux 5.10 (64-bit)

    Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

    Architecture Internet Oracle Linux 5.10 Server:

    (1) database server: Oracle Database 11 g

    (2) the server application: Tuxedo 11 g

    3) web server: logic of Web 10.3.6.0

    (4) browser: Firefox Mozila

    (5) two Instances of huge database on the database server: 8.53 PeopleTools and PeopleSoft Campus Solution 9.0 R5

    I just finished installing Oracle ADR (Application Development Runtime) 11.1.1.6.0 with Weblogic 10.3.6.0 in Oracle Linux 5.10 Server machine. In step 3 of 8 required checks, impossible to pass the 2 items below:

    (1) verification of recommended operating system Packages (no pass)

    (2) verification of the parameters of the kernel (no pass)

    Oracle Linux 5 is certified with ADR and prerequisite verification certificate of operating system is spent, so, I keep the installation to the end successfully.

    My question is:

    2 items not moved will not affect the development of applications or performance later? If so, how to fix?

    Thanks in advance.

    (1) the parameters are necessary, but the system is running with a lower number. Right in the middle of the execution of your application, enter you the maximum and your system stops. It is best to set the values for the given numbers. When you run the Setup program and go to the test page and the test fails, you should be able to click the test below and the installation should continue. If the continue button is not active, you must correct the error.

    (2) I don't have an oel5 system. Missed, you have not all if necessary values in your limits.conf file? The syntax for the Scriptures is essential. Look at the other lives in the files. How do they look like?

    I guess you need to add a space after the * who would set the setting for all users, or set you it only for user oracle, which is the one you normally install the software with. Check out the tutorial I posted the link with my last post. You may need to add the line /etc/pam.d/login and etc/pam.d/sshd.

    Timo

  • DNS settings to the Oracle Linux server

    Hi all

    I have windows server 2003 dns and Oracle linux server 5.3

    How can I resolve ip or add it as a DNS Server 2003 client.

    I need to create RAC installation. to test the object.

    The ip address of the DNS 192.168.31.5

    Node1 ip is 192.168.31.2

    Node 2 ip is 192.168.31.3

    Please suggest.

    Thank you

    Hello

    This is actually a question of Windows Server. This is the official documentation for adding a host in DNS in Windows Server:

    http://TechNet.Microsoft.com/en-us/library/cc779029%28V=WS.10%29.aspx

    For a 2-node Oracle RAC, you must:

    2 public IPs, you already have these:

    192.168.31.2 Node1

    Node2 192.168.31.3

    2 virtual IPs, for example:

    Node1-vip 192.168.31.12

    Node2-vip 192.168.31.13

    address 1 scan resolve in 1 or more IP addresses, for example:

    n scan 192.168.31.14, 192.168.31.15, 192.168,31.16

    (3 addresses are default, but 1 will be perfectly fine for a cluster 2 node test)

    All these above must be in the same subnet.

    Finally, you can add interfaces private to the DNS also, but this is not necessary if, for example:

    Node1-priv 172.16.31.2

    Node2-priv 172.16.31.3

    Note that the private interfaces must be on a subnet differenet.

  • Oracle 10.2 on Oracle Linux 6.3 installation errors

    I encounter this error of runInstaller:

    Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2012-11-13_05-47-27 PM. Please wait... [data oracle@ora01] $ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-11-13_05-47-27PM/jre/1.4.2/lib/i386/libawt.so: libXt.so.6: cannot open shared object file: no such file or directory
    in java.lang.ClassLoader$ NativeLibrary.load (Native Method)
    at java.lang.ClassLoader.loadLibrary0 (unknown Source)
    at java.lang.ClassLoader.loadLibrary (unknown Source)
    at java.lang.Runtime.loadLibrary0 (unknown Source)
    the impossible (unknown Source)
    at sun.security.action.LoadLibraryAction.run (unknown Source)
    at java.security.AccessController.doPrivileged (Native Method)
    at sun.awt.NativeLibLoader.loadLibraries (unknown Source)
    to sun.awt.DebugHelper. < clinit >(Unknown Source)
    in java.awt.Component. < clinit >(Unknown Source)

    I'm using Oracle Linux 6.3.
    I spent hours looking for missing libraries and installed all those who are prerequisites.

    Did anyone seen these errors before installing Oracle on Oracle Linux 6.3 10.2 64-bit?

    Oracle 11.2 has installed without problem.

    Published by: SamM2 on November 12, 2012 23:07

    SamM2 wrote:
    Did anyone seen these errors before installing Oracle on Oracle Linux 6.3 10.2 64-bit?

    You can not install on 6.3 10.2. You can not install anything older than the GR 11, 2 (11.2.0.3) on Oracle Linux 6 Oracle database. Nothing else is certified. Setup for 10.2 is simply not designed to run on Oracle Linux 6 in all.

  • Database home page opens is not in oracle linux 4 after installation?

    I just installed oracle 10g express edition (32-bit) R8 in oracle linux 4 (oem 4) that runs on vmware. After the current installation
    application (start)-> oracle 10 g express edition-> homepage go to database. Homepage of database starts on konqureor and it shows
    "An error occurred when loading * http://http//127.0.0.1: % httpport%/apex*:

    "Host unknown http.

    All other applications including plsql works right which comes with oracle 10 g xe. But I can't start doing plsql, because I can't create a database without having to open the homepage of database without database homepage.
    I also posted this question in yahoo answers (_ http://answers.yahoo.com/question/index;_ylt=AjLqSLCkMZzaJgBv_igbiN7ty6IX;_ylv=3?qid=20120324013912AANOlL9 _) but what responses has been filled that I am not able to understand.

    Please help I want to work on the oracle database. I tried for so long. Thanks in advance

    Edited by: 921562 March 24, 2012 03:35

    Edited by: 921562 March 24, 2012 03:35

    Output message of:

    lsnrctl stat

  • The LaCie in Win XP installation problem

    I have trouble to configure access to a LaCie Network Space MAX, a 2 TB network drive connected to an ethernet on my provided FIOS Actiontec router port.  I am running Windows XP Pro SP3 and have set up a local network by following the procedures described in "Windows XP part."  My problem is that the LaCie supplied installation application, Network Assistant, can't find the new drive on my network.  I get an error message indicating "LaCie network disk is not found."

    The new drive is accessed using this LaCie Support called Server Message Block by clicking Start > run and entering its network address, which is \\192.168.1.4 which brings the player in Windows Explorer.  I can now access the reader in having created a virtual drive 'L' with the address \\192.168.1.4\OpenShare (where OpenShare is the name of the shared folder on the LaCie hard drive) and by implementing a similar entry in my network places.
    I have also set up access to the LaCie Network Space MAX on my MacBook Pro (running OS - X) by using the LaCie Network Assistant with no problems.  In the Mac Finder window, the LaCie appears as a server (disc case) accessible via Network Assistant and a disk with the files and folders.
    Any ideas on how to get the LaCie Network Assistant to recognize the server/LaCie or what the cause of the problem?  Without Network Assistant runs on the PC, I am unable to access the private on the LaCie shared folder.

    Hi MikeAnon,

    The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

    Hope the helps of information.

  • To create the swap space before the Oracle 11 g R2 installation database

    Hello...

    Can someone help me with the commands to create the Linux swap space before installing Oracle 11 g R2 database?

    Thank you

    You can try...

    http://www.Linux.com/news/software/applications/8208-all-about-Linux-swap-space

    http://www.Linux.com/archive/feature/113956

  • Where can I download the Oracle Forms 3.0 installation cd?

    Hi everyone out there,
    Pls can anyone help me give me a link where I can download installers forms 3.0? It's because I need to set this up on my servers from starting applications character mode.

    Thanks in advance.
    Erik

    Forms 4.5 oracle Installer is on my hard drive.

  • Oracle Database 11 g installation problem: ORA - 12560:TNS: Protocol adapter error.

    People,

    Hello. Initially, my Windows XP host name is 'localhost' and IP 127.0.0.1.

    I installed Oracle Database 11 g with Windows XP successfully and all customers in the database with the database instance running.

    For some reason, I uninstalled all of the database server and remove the whole installation directory /oracle.

    I have configured the address IP of Windows XP in 192.168.196.101 to ping other machines.

    For my needs, I installed Oracle Database 11 g with Windows XP again. During step 7 of 8: Oracle Database Configuration Assistant, I got this error:

    ORA - 12560:TNS: Protocol adapter error.

    I click on the button "Password management", there is no line in this window (no user name, no account of the lock).

    I have check the listener as below:

    C:\ > lsnrctl
    LSNRCTL > start
    His output: earphone HEADSET name has already been started.
    LSNRCTL > status
    Its release:... Service DB1 has 1 instance. The instance BD1 ready state. The command completed successfully.

    I check \Oracle\cfgtoollogs\dbca\DB1\trace file, the entry is:

    Listen [0] = LISTENER address = (ADDRESS = (PROTOCOL = TCP (port = 1522))(HOST=localhost))

    I also check \oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\SAMPLE\tnsnames.ora file and listener.ora file, the entries are the same as below

    HOST = localhost port = 1522

    I think that HOST = localhost and port = 1522 is the cause of the ORA-12560 error because Windows XP was configured in HOST = 192.168.196.101.

    But I do not understand how to solve this problem.

    Can any folk tell me how to solve this problem? must cancel the installation of 8 on step 7 and install it again?


    Thank you.

    > The problem is that I am installing Oracle Database 11 g with Windows XP

    Why? above is NOT a supported combination.

    What makes you think that it should work without error?

  • THE HP 1315 PCS CD - INSTALLATION PROBLEM

    MY COMPUTER OS: WINDOWS XP

    MY PRINTER: PRINTER HP PSC 1315, COPY AND SCAN, with original HP CD. (Printer out of warranty)

    I am, of 73 year having no technical Assistance ([personal information deleted])

    Because of some virus, the computer is reformatted.

    During the installation of the CD from HP, he stops in the Middle, and when I'm trying again and again.

    the CD is not fully install, and as many files is sitting in the C"" drive.

    That installation is not satisfactory, to remove the files installed, is impossible.

    (1) now my problem is to know how to complete the installation, to work on the printer?

    2) before installing again, what should I type in "RESTORE POINT DESCRIPTION BOX.

    IN "CREATE A RESTORE POINT" (I think that this will help me to remove installed files - am I right?)

    Please help me, Sir.

    Dear Sir.

    Thanks a lot for the quick response. My problem is solved, and I am able to do my printer

    work. What I did was: in the HP CD, there are 2 Types of facilities option 1. Full and 2. Minimum

    Options. (Previously I didn't want that 2nd.). Now, I tried for the Minimum options. It entirely.

    up and running.

    Again and again, thanks for your immediate help. I'll try following to get peace of mind.

    by using this site. (I previously used site YAHOO ANSWERS for these purposes. In your Site, I feel: you

    take measures to type personal interest. Thank you very much, Mr President.

  • With the MS updates and programs__ installation problems

    I seem to be difficulties with the installation of the updates and Microsoft software, and I don't know why. I bought Visio 2007 and when I downloaded and tried to install the product it failed due to an unknown error.

    In addition, I have for the updates fail when the installation is attempted. The installation of two upates are: the update of Silverlight KB982926 with error code 64 c and PowerPoint 2007 KB982158 update with 800766F error code. When I tried following the information in Help and support, the messages are: the network that this information is on can not be found(which is funny, because I'm not on a network), impossible to find the source and the unknown error. Are there any suggestions?

    http://www.Microsoft.com/downloads/en/default.aspx

    Put the KB numbers in the search at the above link > download them manually.

    If this does not solve it:

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    It's updated operating system Vista, upgraded installation and activate Forum.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

    They will help you with your question of programs in Forum Vista programs at the above address.

    See you soon.

    Mick Murphy - Microsoft partner

  • The program called WiFi radar installation problems

    I am trying to install a program called easy WiFi radar with and without admin and it will not install or tell me the problem. What should I try?

    I think that if the application only problems with Easy WiFi Radar (and just the installation of it) the chances are low that it is caused by a virus.

  • The Smartphone blackBerry Desktop Manager installation problems

    OK, this may seem a stupid question, so please bear with me...

    I have some trouble installing the Desktop Manager software, version 4.2, for my 8320.  I am running Windows Vista.  When I install the program, everything seems to be okay.  I get no error message or anything.  He goes through the whole installation process, and then says it installed successfully and I click on the button "Finish".

    But after the installation, I can't find the program anywhere on my computer.  It does not appear in the framework programmes.  It does not appear in my C:\ drive under program files.  I tried to search my hard drive for "blackberry", "research in motion" 'desktop manager', 'RIM', etc. and he doesn't find anything.  But, when I go to "Programs and features" in my control panel, "Blackberry v4.2.2 for handheld wireless 8320" appears on the list of programs, and I only have the option of where to uninstall.  What is the problem?

    I have internet and can not find an answer.  I tried the fix javascript.dll I found (which was for the error messages, I don't get), I tried to disable the user account control, I uninstalled and reinstalled the program several times, the disc and the Web site.  All to nothing does not.

    I'm going nuts... it's probably an extremely simple, obvious answer.  If someone could help, I would be VERY happy.

    Thank you!

    Thanks, I knew it was something obvious!  When I went to this link before, I was using "Blackberry Curve 8320" in this list, which gave me the 4.2.2 version.  I never even checked this list for version 4.6, b/c I thought by selecting the 8320 would give me the most recent version of the software for my phone.  Don't think.

    Thanks for the help!

  • vmware for linux guest tools installation problem

    a mount cdrom. When I mount it should create this folder

    / tmp/VMware-Tools-distrib accordingly to the instructions vmwware. CD/tmp and I do not see this file...

    any ideas?

    Hello

    You will get this folder after you one) copy. tar.gz file in your CDrom file in / tmp and then unzip it (index):

    tar xvzf 
    

    )

    It does not automatically.

    --

    Wil

    _____________________________________________________

    Visit VMware developers at http://www.vi-toolkit.com wiki

  • Oracle 11g R2 on Oracle Linux 7 loading problems

    It drives me crazy!  I use VMPlayer (6.0.4 build-2249910) to load the Oracle 7 and have no problems at all.  However, when I install Oracle 11 g R2, that's when I encounter problems (just loading software; not to create a database at the moment).  First of all, let me tell you, I'm not some process that I found on the internet several times.  There are slight differences in some of them, but essentially, I used the website below to install Oracle 11 g 2 on Oracle Linux 7:

    ORACLE-BASE - Oracle Database 11g Release 2 (11.2) Installation on Linux Oracle 7 (OL7)

    When running through the installation, I first encountered the ctx error:

    ctx.png

    I could find anything on this subject, so I continued in this way.  To learn more about this later...

    The next error I get is:

    emagent.png

    This second error was easy to be supported by the following:

    During the connection phase, you will encounter an error invoking the file 'ins_emagent.mk '. To resolve this problem, change the "$ORACLE_HOME/sysman/lib/ins_emagent.mk", do a search and replace the line below.

    FROM:

    $(MK_EMAGENT_NMECTL)

    TO  :

    $(MK_EMAGENT_NMECTL) -lnnz11

    Click 'Retry '.

    Now took care of the issue emagent.

    On the issue of CTX, I can't find anything on this at all!  I looked in the log file and found the following detail:

    INFO: mv /u01/app/oracle/product/11.2.0/bin/ctxlc /u01/app/oracle/product/11.2.0/bin/ctxlcO f

    INFO: mv ctxlc /u01/app/oracle/product/11.2.0/bin/ctxlc

    INFO: chmod 751 /u01/app/oracle/product/11.2.0/bin/ctxlc

    INFO: gcc o ctxhx-m64-L/u01/app/oracle/product/11.2.0/ctx/lib/-L/u01/app/oracle/product/11.2.0/lib/-L/u01/app/oracle/product/11.2.0/lib/stubs/ /u01/app/oracle/product/11.2.0/ctx/lib/ctxhx.o-L/u01/app/oracle/product/11.2.0/ctx/lib/ - lm-lsc_fa-lsc_ex-lsc_da-lsc_ca - lz - lctxhx-Wl,-rpath,/u01/app/oracle/product/11.2.0/ctx/lib-lsnls11-lnls11-lcore11-lsnls11-lnls11-lcore11-lsnls11-lnls11-lxml11-lcore11-lunls11-lsnls11-lnls11-lcore11-lnls11 ' cat / u01/app/oracle/product/11.2.0/lib/sysliblist

    INFO: '

    INFO: /lib64/libstdc++.so.5: refers to 'memcpy@GLIBC_2.14' the undefined

    collect2: error: ld returned 1 exit status

    NEWS: make: * [ctxhx] error 1

    INFO: End of the generated process exit.

    INFO: ----------------------------------

    INFO: Exception thrown from action: do

    Exception name: MakefileException

    Exception string: error in invoking target 'install' of makefile ' / u01/app/oracle/product/11.2.0/ctx/lib/ins_ctx.mk'. See ' / u01/app/oraInventory/logs/installActions2014-11-28_12-45-46PM.log' for details.

    The exception severity: 1

    It seems to be hung on the reference to "memcpy@GLIBC_2.14".  I found a few web references on this, but I don't think that they apply given that sites speak other Linux distributions.

    What bothers me the most about it is that I use everything which is Oracle (except VMPlayer), but I get errors that I don't think that should be the case because there is nothing else than the Oracle!

    Is there something I can add to the command 'gcc' or the make file that will get this work?

    BTW: I think that I will not use CTX with my DB, then will I get in trouble if I create a database with this error CTX?

    Thanks in advance!

    It drives me crazy!

    That's because GR 11, 2 is not certified or supported on Linux 7 (no matter what claim of third-party sites or blog-see the subheading of the blog). Only 12cR2 is http://docs.oracle.com/database/121/LADBN/toc.htm#LADBN101

    So, you can either 12cR2 (1) installation on Linux 7 by following the steps of the official installation guide or (2) downgrade your operating system Linux 5 or 6 of Linux to install 11 GR 2 (Linux 6 requires 11.2.0.3 or higher - http://docs.oracle.com/cd/E11882_01/relnotes.112/e23558/toc.htm#CHDFHIEA)

Maybe you are looking for

  • Impossible to update the database of location

    Howdy, I've had this alias in my .profile for awhile: said the update = 'sudo /usr/libexec/locate.updatedb. However, I don't remember if I used it because I upgraded to OS 10.11.4 When I call to the top I have in the past, I get the following message

  • FAQ (24): SDM won't install after upgrade to win 8

    I have upgraded to Windows 8 and now the SDM will not be installed. Why is this?

  • Reinstall MSVCR110_CLR0400.dll what program?

    At startup I get this message when the office - "the program can't start because msvcr110_clr0400.dll is missing. Try reinstalling the program to fix this problem. I have already downloaded versions of Microsoft Visual C++ 2005 without result. Please

  • Cannot open emails from IncrediMail

    * Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs I use Windows 7 and use IncrediMail to my e-mail address. Emails come but does not open and a few times the window freezes,

  • Is there a way to change the number of monitor?

    Is there a way to change the number of monitor? My pc screen is showing that monitor 2 and my tv shows as monitor 1. I want my computer is 1, so when I move from one screen to the other, I can turn left to right, not right to left.