dcd5800 sff desktop PC: dc 5800 sff I m not able to change the bios setting

How to get the password of the bios

as I m having dc 5800 sff f10 bios password I forgot kindly help as I not able to change the bios setting

Updated the BIOS will not clear the password.

You can try pressing and the little button cmos clear yellow with the jumper removed password and see if that does anything.

I think that the motherboard has a problem because removing the rider of P/O should have removed the password.

Now turn you on the PC with the jumper removed, correct?

You turn off the PC and unplug him.  You then remove the jumper P/W and then turn on the PC.

That's when the P/W should be cleared.

Then you shut down the computer, unplug and replace the rider of P/W.

Tags: HP Desktops

Similar Questions

  • Not able to change the desktop resolution

    I asked a question yesterday and paid $15.00 and I have not received any response

    I changed the resolution on my toshiba lap top, when I changed to 800 x 600

    to1024x768 for taxes that I did, the screen shrunk 2 inches on each side

    and will not go back when I changed the resolution on the setting of 800 x 600

    I have comcast hot mail [oldmomma33] [* address email is removed from the privacy *]

    Hello

    try to go to your website of toshiba to the link below and look for the download section of drivers to the tab at the top

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Search for your model number of the laptop and download and install the latest graphics drivers for vista

    THEN try to make the screen of solution of problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  • Im not able to install the desktop version of adobe story

    Im not able to install the desktop version of adobe story. Please help me with this.

    Hello

    You must have more (not free) story to be able to install the desktop application. If you are, you can simply go to "story.adobe.com" and install the application from the home page (you'll see an option 'Install desktop application' it).

    Let us know if you face any problem.

    Thank you

    Rashi

  • iTunes is not able to find the USB controller on PC desktop computer and laptop

    Hello

    Since the two versions of iTunes for Windows (10) diagnostic program tells me a green dot in front of "USB-connections", but didn't tell behind the "no-USB controllers found. That's why my iTunes is not able to connect to the iPhone 5. I have the same problem on my desktop and on my laptop. Windows detects all my USB Ports, well. If someone can solve it? Thank you.

    If your iOS device does not appear in iTunes, try the following:

    1. Open Control Panel > Device Manager
    2. Plug in your device
    3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
      It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
    4. Right-click and select software update of the driver...
    5. Click Browse my computer for driver software
    6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
      C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
    7. Click on let me pick from a list of drivers for devices on my computer
    8. Click on Apple Mobile Device USB Driver
    9. Click Next, then close and exit the Device Manager

    To step 3 above, open the Device Manager. Expand one of the articles that are listed.

    • USB Bus controllers
    • Imaging devices
    • Portable devices
    • Other devices

    Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

    Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

    If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.

    Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

    TT2

  • VPN client works well, but I am not able to open the desktop remotely

    Hi all

    I configured a router 877 with features of firewall and VPN and DDNS, when the user connects his WAN pc via VPN all works well (mail, telnet, ping, LAN access) but the Remote Desktop feature is not available. I traced with wireshark and saw that the request to port 3389 was correctly sent to the destination server, but the response to the VPN client has been abandoned by the router... and I have no idea how to solve this problem.

    Can someone help me...? Thank you very much.

    Ilaria.

    In room router attached.

    Your problem is the NAT-config. First of all, the next line is not necessary that RDP does not have UDP ober:

    IP nat inside source static udp 192.168.10.136 3389 3389 Dialer0 interface

    Then, the following command causes problems:

    IP nat inside source static tcp 192.168.10.136 3389 3389 Dialer0 interface

    With which the router assumes that the server 192.168.10.136 must always be reached through the IP address of dialer0 and made a translation.

    There are two ways to solve the problem, but they all have some disadvantages...

    (1) only access the server through VPN. For that you can just remove the NAT statement above (the one with tcp) and you should be able to reach the server via VPN.

    (2) restrict the NAT for not doing a translation if a VPN-peer's access to the server.

    To do this, you must attach a roadmap to the NAT statement. But who does not work with the "interface" - keyword in the NAT Statement. But you can use it if you get a fixed IP address from your provider.

    (3) assign a second IP address to the RDP server. The period of the original INVESTIGATION that is used in the NAT statement is used to access the server without VPN, the second IP address is used to access the server through VPN.

    --
    Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
    http://www.Kiva.org/invitedBy/karsteni

  • Not able to see the icon for the external hard drive on my desktop after upgrade to Sierra

    Dear all,

    I am new to Mac and the OS, I have a Macbook Pro... recently, I upgraded the OS to imed, and since after that, whenever I connect my external DRIVE to Seagate drive in my macbook pro, I don't see the icon on my desktop and as a result, I can't access my files on my HARD drive. However when I check in disk utility, it shows the HARD drive it.

    I could help out me here to ask you to please!

    Kind regards

    Naughty Arlette

    If it's a NTFS formatted disk, then you must update the Paragon NTFS of Seagate driver (available on their support site).

  • I am not able to copy the Favorites on the desktop. It started a few days ago.

    I ran Spybot and Adaware. I cleaned my computer and it seems to work better. I installed Adblock and I don't get ads that is really nice. I noticed that my favorites on my desktop will not work now. Also, if I try to drag the block or circle on the desktop, it will not work. I have reset Firefox, started in safe mode without AdBlock. Nothing seems to work. Any ideas?
    Thanks to a bouquet.


  • Desktop HP HPE h9-1150 Phoenix: can you do a update the BIOS of Windows 8 while on a Windows 10 operating system?

    As indicated in the title, you can do a BIOS in Windows 8 update while on a Windows 10 operating system?

    I have a Phoenix desktop h9-1150 and am trying to install a new GPU GTX970. There is no updated BIOS for Windows 10 at this time, but there is an update of my current BIOS 7.07 for Windows 8 OS. Can I do that Windows 8 updated safely?

    Normally the flasher will check to verify the operating system, but I can't on this one.  It does not separate out ROM file, even if it does not check if the operating system you can always extract the file BIOS and flash BACK.  I would try it first in windows.  It will tell you if there is a control in place.

  • Not able to establish the remote desktop connection.

    Original title: what is bluebarh.gif.

    I think that I have bluebarh.gif installed for remote connection. Kindly guide how to do this.

    Hi GautamKohli,

    You try to install the update that is available in this link.

    MS02-046: buffer overflow in TSAC ActiveX control might allow code execution

    Later, try to establish the remote desktop connection.

    Start using Windows XP Professional with remote desktop

    Hope the helps of information.

    Please post back and we do know.

  • BlackBerry smartphones I have loaded the Desktop Software 4.5 on my computer - not able to load on the BB 8310

    Hello:

    I went on the Blackberry site and loaded the carrier ATT page software, Desktop software, it's on my computer, but when I plug my BB I can still see the white screen with JVM 513 error and the Director of office gives me again - no request is available.  How can I get the software to reload on my BB 8310.

    Please help, I don't want another phone, I like this one.

    Thank you

    Ladylaresa67

    Can be accessed through this site

    http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  • I'm not able to get the sound card drivers for a sony VAIO desktop computer

    I'm not able to get the audio drivers for a sony VAIO desktopPCV 2253 someone can help me get t for free

    Hello

    Check with the Sony Support, their drivers and documentation online and ask in their forums.

    Sony - Contacts
    http://eSupport.Sony.com/us/Perl/contact-land.pl

    Sony - drivers
    http://eSupport.Sony.com/Perl/select-System.pl

    Sony - Support
    http://eSupport.Sony.com/

    Sony - Forum
    https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Programs do not appear in the Start Menu and not able to access the icons the desktop, images or documents

    restore programs

    my computer was recently attacked by several Trojan virus, I have, but now all my programs are not in the menu to program everything, all my Articles from destop disappeared, images, texts and documents too. They are however still on my hard drive. How can I restore and access as before? Help, please

    Perform the system restore

    http://support.Microsoft.com/kb/306084

  • Desktop computer HP P6813w there a RAID option for drives in the BIOS?

    Hello

    Looking to buy one of these HP p6813w.

    I was wondering if the BIOS supports RAID 2 discs.

    One-piece

    Hi one-piece,.

    Boot in the bios (F10 setup) and get off at the fall of peak.  Look at the setting for the sata controller mode and see if you have an option to select RAID.  I do not think that the motherboard in the P6813w RAID capacity according to the information I've seen made available by HP.

    If you really want to RAID, then you could buy a RAID PCI card - E to support two data disks.

  • I have windows Vista Sp2. Cannot get into the BIOS. Computer does not start on the desktop. What can I do?

    Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

    Someone at - it ideas. Thank you.

    Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

    Someone at - it ideas. Thank you.

    Don't ned to start the Office before accessing the BIOS...

    The following tutorial is about changing the bios boot sequence.
    #1 step is how to get to the BIOS window. THIS show be what you need. You can skip the rest if they do not apply to you.
    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • I just bought a cordless desktop S 520 and hooked up to my counter top, I'm not able to get something going on the key board. all of the suggestions.

    I just bought a cordless desktop S 520 to my counter top. I am not able to get the keyboard to work.

    I just bought a cordless desktop S 520 to my counter top. I am not able to get the keyboard to work.

    Hey Gwendybee2709

    Download and read the link below logitech s520 keyboard manual

    If the troubleshooting it does not solve your problem there is a support link to contact you at logitech

    http://Logitech-en-AMR.custhelp.com/app/answers/detail/A_ID/10392/~/manuals-for-Cordless-Desktop-S520

    Walter, the time zone traveller

Maybe you are looking for

  • Tablet and Portege Z10T-A140 - different serial numbers - dock

    Hello I bought 2 pieces Z10T-A140.Then I opened the package include the serial numbers on the packages is different with serial number on the docks. Thank you.

  • Graphics went on my Satellite P200-144

    Hi guys ran cod modern warfare 3 on xp64, and it crashed. Rebooted but graphics were gone, I get a vertical striped screen, looks like that iv, e fried the chip.Tried to reinstall drivers, also in safe mode. Tried to format and reinstall but no go. I

  • How can I activate by phone when there is no other methods specified by Windows 7 Pro?

    Reinstallation of Windows 7 Pro after crash on the same machine does not turn on, or it shows how to activate the phone.

  • Can I use my product key?

    I have just upgraded your laptop from Vista to 7, but had to use the custom installation option, because Vista has been altered. My key has been upgraded only and therefore will not be accepted on the operating system installed for activation. I have

  • Flashback Data Archive issue

    Hi allThere is this issue on the web:Q: identify the statement that is true about Flashback Data Archive:A. you can use multipletablespaces for an archive, and each archive can have its own maintenance time.B. you can have an archive, and to eachtabl