DCOM got error "% 1084" try to start the service EventSystem with arguments "" to start the server: {1BE1F766-5536-11 D 1 - B 726-00C04FB926AF}

Similar Questions

• What should I do to solve this error message: DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:

  I'm on Vista Home Premium 64 bit on an HP Pavilion dv4 laptop... using my laptop in the last days, I got the blue screen, only the Blue has alternating vertical black lines through it... the other thing that happens is I use the laptop and my screen will get completely distorted and will lock the laptop.

  I ran an antivirus and it cleaned up a bunch, but I suspect, that there is more to do.

  I'm a bit technical, but expired (got my MCSE 10 years ago have left the technical aspect of life, and have a basic understanding of).

  Hello

  ·         Did you of recent changes to the system such as the installation of the updates?

  I suggest you to run the Microsoft Safety Scanner and check if the system is infected with a Virus/malware.

  See the link below for more information.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Check and make sure that all drivers are up-to-date.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the methods above do not help then I suggest you to post the question on the TechNet forum for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• Error: _ "Sidebar.exe - bad image"__windows/system32/sfc.dll is not designed to run on windows or it contains and error. " Try to install the program by using the original installation media or contact your system administrator. __

  Help, please!
  I started my computer today and it came with this error:

  "sidebar.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click on OK, then he said:

  "Acrotray.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click OK and then it says:

  "hpqtra08.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  Also I got an error report saying that windows sidebar stopped working.

  My computer is VERY slow in all the commands I give.
  I also tried to run the sfc (System File Checker command) and acts like he is going to run the program, but then just closed.

  Do you have an idea what is happening with my computer and what I can do to fix this?

  Thank you very much!

  Hi deacon829,

  You did changes to the computer before that happened?

  Step 1: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If you try to install any application before this program, try to uninstall them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If this solves the problem, you can deduct that the demand is probably corrupted, damaged or incompatible. You can check with the manufacturer of the program for more information.

  Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.

  Look for steps to restore of the system in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If the problem persists,

  Step 4: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: windows\system32\difxapi32.dll isn't is either not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for

  Hello

  I keep getting error messages when I use the computer. It started two days after you download an update from Windows. A sample of the error is:

  C:\windows\system32\difxapi32.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  I use a vista. I don't know how to solve this problem, many want to help.

  Thank you.

  Hi Colinthebrave:

  Start with this little tool to help get rid of the error, once your system is stable again and then try to run your updates again.

  Thank you for your message; Let us know how it goes.

  o

  o The System Restore tool

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose another restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Don
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get this error message 'some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.  But all the content loads correctly, and it just seems to be an annoying error message.  Does anyone know how I can get rid of this or that which is the cause.  Site is: http://davidkimlaw.com

  You solve the symptom and not the problem. If something is to change the files after they are exported from Muse, the consequences could be vast and varied download to download.

  Don't the accordion on the 'AREAS' jobs page widget if this file exported (and unaltered) opens in the browser on your local computer? It doesn't seem to work on the online site, which could be linked to the questions of the error was about or may be an offshoot of some hand changes were made after export.

  If you empty the re-export of Muse in a folder and then download the same files, I'll take a second look at what's going on. If you wish, you can you could do that in a subfolder so as not to disturb the live site. (When I detected that the index.css file is out of sync I was on my phone and could not go any further.)

  There is also more information about the possible causes of this error here "some files on the server may be missing or incorrect" Warning Message>.

• Desperately need help with win XP Edition family, I need to update my PC but get the error message "cannot connect to the server.

  I need to update my pc, I have windows xp home edition. I had sp2 on my computer, but my system crashed almost and I had to do a total system recovery and it removed my files. Tried to download again, but I can't. I get error could not connect to the server. I have no virus or worms and checked each article are saying sp1 kb. I can't update the Explorer or anything like that

  Follow the links in this article to download the Service Packs from Microsoft.  You can download on another computer if necessary and move them to your machine to update.

  "How to obtain the latest Windows XP service pack"
    <>http://support.Microsoft.com/kb/322389 >

  HTH,
  JW

• ODI-26174 error when try to turn the Table in the model

  Hello

  I got a strange error when I try to turn the table in the model.

  I created the new user (with subsidies), I created the new physics and logic diagram.

  I created new model also. When I try to reverse table I ODI-26174 database connection is not available error

  I tried to measure option using RKM reverse .it. But why it has not been reversed by using option Standart?

  ava.sql.SQLException: i/o error: the network adapter could not establish the connection

  at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)

  at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)

  at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter.getConnection(OnConnectOnDisconnectDataSourceAdapter.java:74)

  at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java:1128)

  Any Solution for this?

  Concerning

  AETL

  Hi aetl,.

  If you open the database server in the physical topology and click 'test connection', is it effective?

  If this isn't the case, you must set your connection details, maybe check that the tnsnames.ora is correct and that the network access is ok (including firewalls,...). You can try a tnsping on your database.

  Kind regards

  JeromeFr

• Error when try to use the rowid with the table alias

  I tried using a table alias to test the functions of Manager of rules and met the following problems.
  
  1. I have clone from a schema HR employees and departments tables.
  
  2. create data as follows:
  
  BEGIN
  dbms_rlmgr.create_event_struct (data = > 't_a');
  dbms_rlmgr.add_elementary_attribute (data = > 't_a',)
  attr_name = > "a_employees"
  tab_alias = > exf$ table_alias ('employees'));
  dbms_rlmgr.add_elementary_attribute (data = > 't_a',)
  attr_name = > "a_departments"
  tab_alias = > exf$ table_alias ('departments'));
  END;
  
  3. create the class rule as follows:
  
  BEGIN
  dbms_rlmgr.create_rule_class (rule_class = > 't_as',)
  Event_Struct = > 't_a. "
  action_cbk = > 't_acb ',.
  rslt_viewnm = > 't_arv');
  END;
  
  4. After adding a rule to the rule class, I try to test as follows
  
  DECLARE
  r_emp ROWID.
  r_dept ROWID.
  CURSOR a_cur IS
  SELECT emp. ROWID, Dept. ROWID
  Employees OF ministries dept (IEM),
  WHERE emp.department_id = dept.department_id;
  I have NUMBER: = 1;
  BEGIN
  OPEN a_cur;
  LOOP
  EXTRACTION a_cur
  IN r_emp, r_dept;
  EXIT WHEN a_cur % NOTFOUND;
  dbms_output.put_line (i);
  i: = i + 1;
  dbms_output.put_line (r_emp);
  dbms_rlmgr.add_event (rule_class = > 't_alia',)
  event_inst = > r_emp,
  event_type = > 'employees');
  dbms_rlmgr.add_event (rule_class = > 't_alia',)
  event_inst = > r_dept,
  event_type = > "departments");
  END LOOP;
  END;
  
  But I got the following error
  
  SQL > DECLARE
  2 r_emp ROWID.
  3 r_dept ROWID.
  4 a_cur CURSOR IS
  5. SELECT emp. ROWID, Dept. ROWID
  6 employees OF ministries dept (IEM),
  7 WHERE emp.department_id = dept.department_id;
  8 I COMP: = 1;
  BEGIN 9
  10 a_cur OPEN;
  11 LOOP
  12 FETCH a_cur
  13. IN r_emp, r_dept;
  EXIT 14 WHEN a_cur % NOTFOUND;
  15 dbms_output.put_line (i);
  16 I: = i + 1;
  17 dbms_output.put_line (r_emp);
  18 dbms_rlmgr.add_event (rule_class = > 't_alia',)
  19 event_inst = > r_emp,
  20 event_type = > 'employees');
  21 dbms_rlmgr.add_event (rule_class = > 't_alia',)
  22 event_inst = > r_dept,
  23 event_type = > "departments");
  24 END LOOP;
  25 END;
  26.
  DECLARE
  *
  ERROR on line 1:
  ORA-06550: line 1, column 36:
  PLS-00201: identifier 'AAAVN9AAEAAAQH8AAA' must be declared.
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  ORA-06512: at "EXFSYS. DBMS_RLMGR', line 974
  ORA-06512: at line 18 level

  Hello

  ROWID for individual tables can be added as events only if the rule class is set up as a Composite. For all other cases, ROWID is treated as data and they need to be formatted as a string of instances of AnyData or name-value pairs. Your script is to think that you intend to create a composite rule class while you might add ROWID individually. If please, recreate the rule as a composite class and try again. The error message you received is incorrect and has been corrected to indicate that the error is with the format data point past.

  Hope this helps,
  -Aravind.

• Error 91 - try to use the variant of the function of data

  I'm running a problem when you try to use variations in my application. I have a setup of State machine that a State creates a list of tasks (cluster of tables), and then converts it to the Variant. The variant is fed into a shift register that allows me to access the list of tasks of a different State.

  The problem comes when I try to use the variant of the function Data. I right click on the task cluster to create a constant and then wire to the TYPE of the variant of the function Data. I wire the variant of cluster of task to the terminal of the VARIANT. When I run the VI, I get error 91: or the possible reasons: LabVIEW: the variant data type is not compatible with the data type of wired for the input type. ».

  How can I get this error if the type that I have connected to a Terminal TYPE of the Variant Data terminal is a constant created from the exact type created a variant of?

  Section of the machine of the State where I wire the cluster variant:

  

  Section of the machine of the State where I use the data out of the cluster variant:

  

  The constant wire to the terminal of data TYPE variant was created from the cluster that is connected to the Variant type data. I don't understand how there is a type mismatch?

  Is there another State between these two?  I notice you have some tunnels 'Use default if unwired' coming out of the structure of your business.  First of all, clear on the tunnels.  Second, in cases where you do not only affect the data, the data directly from the tunnel entrance in the tunnel exit of the wire.  I recommend using the tunnels linked to make it even easier on yourself.

  With the default tunnels being output, your variant coming could really be empty, so the conversion fails.

• c:\Windows\System32\dbghelp32.dll is not designed to run on Windows or it contains an error. Try to install the program using the original media, or contact your system administrator or the provider of software for support.

  This shows up every time I open a program and when windows starts up.

  Hello kdubu722,

  Try to start your system in safe mode:

  Restart your computer if it is running. Press and hold the F8 key for 3 seconds after your computer powers initially on. Once you see the Advanced Boot Options menu (or beep) you can stop. Up/down arrow keys to highlight your selection. Select Mode safe mode with networking and press ENTER. You should see drivers loading, it may take a few moments. You should then be at the Welcome screen. Connect to your computer using an account with administrator privileges. Now, you download (free) MalwareBytes from here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html?tag=mncol install, Update then do a scan of your system in safe mode, to ensure that it is indeed clean! Once the scan done remove anything it finds. Simply restart your PC to see if your problem has been resolved!

  If your system is clean, then run this analysis of Auditor system in SafeMode below files:

  1. click on Start, click principally made programs, Accessories, right-click on command promptand select run as administrator.

  2. click on continue or provide credentials admin if prompted.

  3. in the command prompt window type the following, sfc/scannow (yes he's a space after sfc), and then press ENTER. This analysis may take some time to complete.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• When I try to download sp1a for windows xp to update I get error message cannot conect to the server. What can I do

  I have windows xp. She badly needs updating. What is the most simple and quick way to update?

  Hi Lynmiller,

  ·         You install the service pack through Windows Update?

  If so, you can try to install the update manually and check if it helps. In addition, it is important that you install SP3 because this update contains several other important updates and security updates.

  Step 1: To install SP3, you must first have Windows XP Service Pack 1a (SP1a) or Service Pack 2 (SP2) installed.

  Download details: Windows XP Service Pack 1a Express installation

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=19751

  Step 2: Follow this link to install Service Pack 3.

  Learn how to install Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  I hope this helps.

• Errors in user profile on the server terminal server 2008 R2

  I have a problem on a Windows Server 2008 R2 SP1 running Terminal Server services with roaming profiles. The server works as a terminal server server for some time without any problems, but a few weeks ago he began logging on users with temporary profiles or refusal to sign indicating "the user profile Service has no logon. User profile cannot be loaded. "Once rebooted the server seems to act normally, but when 8-10 users have experienced successful logons, the above behavior reappears. At the end of the day, when the activity of the user falls, he can still connect new users - it seems that it is not related to the content of the files of the user's profile. When I check the event logs, the user profile service seems to work, successfully copying profiles on local profile paths. The Windows Modules Installer service cannot be started, error 1450 insufficient system resources. SFC and Windows Update don't work either, probably related to the error of the Windows Modules Installer. In addition, a mistake DCOM ("the server is not registered... ") is recorded in the log of events after each reboot, by referring to the"component base maintenance Session. My impression is that this problem is related to a kind of inadequate resources (non-material resources, the server is well equipped for the current level of activity), so I was running after the registry size, memory management, memory paged and nonpaged pool size, etc, but without any significant success. I realize that it is a somewhat soft and open query and I'll be happy to provide all necessary information - I spent a bit of time on this problem, and any suggestion or comment is welcome.

  This kind of question is really beyond volunteers in this forum, which
  deal with Windows users with security issues.  You must go to
  TechNet and browse the forums to see if there is a good place for this post,.
  TechNet is where the gurus of Pro and server IT hang out.

• Error: unable to connect to the server 'Err_connection_refused '.

  Dear friends!

  I use a macbook pro (mid-2012 model year) updated with OS X 10.11.4.

  Recently, I am unable to connect to most of the Web sites in nearly all browsers (firefox, google chrome, safari). I am able to open gmail, sites of apple and google start page.

  Error message in chrome like "Err_connection_refused".

  Error in Safari, as "Safari can't connect to the server.

  I tried to delete the browser cache, cookies and even re-installed browsers. But it helps did ' t.

  I tried to delete the WiFi under preferences and recreated. Still problem persists.

  I am able to display all Web sites in my windows laptop and mobile phones connected to the same WiFi at home.

  Above the problem came recently for 1 week. Please suggest a solution.

  Kind regards

  BALAJI K

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  VSearch malware tries to hide by varying names of the files it installs. To remove it, you must first identify the naming model.

  1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. The files that belong to an instance of VSearch will have the same date of change within about a minute, so they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Search in the folder with the name of all these forms:

  com.something.daemon.plist

  com.something.Helper.plist

  com.something .net - preferences.plist

  Here, something is a string, which may be different in each instance of VSearch random meaningless. So far it has always been an alphanumeric string without punctuation signs, such as "disbalance" or "thunderbearer."

  You may have more than one copy of the malware, with different values of something.

  There may be one or more files with the name of this form:

  com.somethingelseUpd.plist

  where George can be an empty string of sense that something different. Yet once, there may be more than one file of this type, with different values of Gisele.

  Here is a typical example of an infection VSearch:

  com.disbalance .net - preferences.plist

  com.thunderbearerUpd.plist

  You will have files with similar names, but probably not identical to these.

  If you feel confident that you have identified the files above, drag only the files - nothing - to the trash. You may be prompted for administrator login password. Close the Finder window.

  2. open this folder as in step 1:

  /Library/LaunchAgents

  Move to the trash all the files with the name of the form

  com.something.agent.plist

  where something is one of the strings that you found in step 1. There may be not all of these files.

  3. If you have whatever it is moved to the trash in step 1 and step 2, restart the computer and empty the trash.

  Do not remove the folder 'LaunchAgents' or "LaunchDaemons", or anything else inside of one or the other, unless you know you have another type of unwanted software and more VSearch. Records are a normal part of Mac OS X. The terms "agent" and "demon" is a reference to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  4 reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  5. If you do not find the files or you are not sure about the identification, after what you have found.

  If in doubt, or if you have no backups, change nothing at all.

  6. the penalty may have started when you have downloaded and run an application called 'MPlayerX' or "PDF Pronto." If there is an element with a name in the Applications folder, delete it.

  This Trojan horse is often found on the illegal Web sites that traffic in content such as movies pirated. If you, or anyone else who uses the computer, visit these Web sites and follow the instructions to install the software, you can expect more of the same and worse, to follow. Never install software that you downloaded from a bittorrent, or which has been downloaded by someone else from an unknown source.

  In the aspect of security & confidentiality of system preferences, select the general tab. The marked anywhere radio button should not be selected. If this is the case, click the lock icon to unlock the settings, and then select an other keys. After that, do not ignore a warning that you are about to run or install an application from an unknown Director.

  Then, still in system preferences, open the pane of the App Store or software update and check the box marked

  Install the system data files and security updates (OS X 10.10 or later version)

  or

  Automatically download the updates (OS X 10.9 or earlier version)

  If it is not already done.

• How can I subscribe to nesgroups - get an error unable to connect to the server

  Attempted to subscribe to newsgroups, but get an error message - unable to connect to the server.  What I am doing wrong?

  msnews and msn newsservers and groups are gone.  There are a few free newsservers, such that news://nntp.aioe.org , but a pottery forum is empty.  There are also some newsservers that you can pay for.  You could try emailing somone who already contacted you in the other forums to see if they have suggestions and what they are doing in this regard.

  Steve

• Problems with wild tangent error "Could not connect to the server."

  Original title: wrong with wild tangent

  I recently downloaded ie 9 latest version. If this has something to do with him or not. but I can't play all the games that I download from wild tangent. What happens, it is 'impossible to connect to the server', please check you internet connection again. but I'm connected to the internet, otherwise he would not have uploaded the game

  Hello

  What operating system is installed on the computer?

  The error is that she's trying to connect to wild tangent, but unable to complete the connection.

   

  Method 1: You can disable the security software and see if that helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference:

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Method 2: Optimize the Internet Explorer browser.

  Reference:

   

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  Internet Explorer is slow? 5 things to try:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance