DDF mount data to the database

Similar Questions

• Cannot insert data into the database

  Hello world

  I stuck with a problem in DB juice. When I try to insert data into the database using DB tool, I get a repeated error message (error 1). Please find the my vifile below and solve say.

  Problem is use Labiew 8.2. So try to answer accordingly

  Try it with a cluster instead of a string or an array.

  

• update set to update the data in the database.

  At what stage of the treatment I have to use a rule to update to apply logic to the way the data are updated in the database?

  Hello

  You can use the update rule to update the data in the database.

  Thank you

  edynamic Experts Eloqua

• Remove the mask before entering the data in the database?

  Hello!

  Hey guys, I'm with the following problem, I am using plugin 'text with hidden Input field', works perfectly in a deal to add the mask, but I have a problem saving the data in the database, I need to record data only, without the mask at all, no idea how to do this, a dynamic of action? What would be the best way to go, and if they have advice on how to make would be welcome.

  Thank you!

  Hello!

  I would like to share with you that I found the solution to remove the mask before you update the database, I share case someone needs and evaluation of teachers is the best solution, I did the following creates a "process after Submit" before performing the "LMD" process, removing the masks as replace, just below my code is pretty simple as I said, my point in this case decided, as I have said I would like that assessment of you as possible to see if others have better enforcement solutions!

  : P33_NR_CEP: = replace (: P33_NR_CEP,'-', ");

  : P33_NR_TELEFONE: = replace (replace (replace (: P33_NR_TELEFONE, '(', ''), ')', "),'' ', ',");

  hug!

  Chubby Kiran fac586

• Current version of the data in the database has changed since the user initiated the update process.

  Hello

  I get this error message: when I update a table.

  • Current version of the data in the database has changed since the user initiated the update process. version of current line identifier = "4975F66067C6EE412FF51DF46B8C4916" line application version identifier = "31163419BE48C198DE88A34AD12FE4D2".

  I get this message when a process is used to run an update on the same table.

  BEGIN

  RUN IMMEDIATELY "UPDATE CONTRATS_MAINTENANCE SET EMAIL_SENDED = 0 WHERE ID =: 1' WITH THE HELP OF: P27_ID;"

  END;

  There is an automated line (DML) process process on the table on this page.

  
  

  I understand that I get this error message because I update the database EMAIL_SENDED in the same table column and tha the automated process line try to update the same table...

  On this page, I want to the column EMAIL_SENDED always has the value 0 (zero). It is a database column

  How to do?

  Thank you for your help.

  Christian

  If you try to make it through a normal form. So in this case email_sended is getting two values one of your FORM and one of your update statement.

  To resolve this problem, you can code in hard EMAIL_SENDED point the value '0' and keep only the database column.

  If the whenver update you will automatically take the value 0.

  Another solution would be to remove this column from your FORM and then update by creating a process after submit.

  BR,

  Patrick

• How to keep summers jsf pages correctly updated to account for changes to data in the database?

  This is a case of common use for web applications:

  User open A (i.e. a jsf page) of a web application, keep open for a period of time and do some browsing or editing on this page.

  During this time, someone others or modified events of the data in the database, then:

  Scenario A:

  1. the user should be able to see the evolution of the data in the above open jsf page when page navigate to other records.

  or when the page is refreshed by refreshing the web browser (reload the page) or by pressing a button on the page manually.

  Scenario b:

  2. the page should be able to be updated automatically to reflect the new changed data in the backend database.

  -This means that the user has no need to run the refresh action intentionly/manually to get the new data.

  Here's a possible implementation are provided in subsection 12.1 JDEV/ADF for above use cases:

  1.kdario: tips to know how to refresh your data

  Re: Field Image cannot refresh when you move between records in a jsf page

  In my opinion, the solution of kdario is a little bit complicated, is there an easy approach?

  and kdario says:

  'normal way' for update page is generally very bad for applications based on JSF/ADF.

  Is there more evidence or reference documents to support above sayings?

  2 to implement scenario B, which is recommended methods?

  Is the Active Data one approach good?

  If there are active - as tech batteries was adopted for web applications on the internet (which will have more agreement than in the intranet user), would there be possible serious performance problems?

  Thanks in advance.

  In fact, I suggested to the position 3 solutions (and option c) Notifications of changes to database is the most complicated).

  Also, here is solution d) in pageDef, select iterator and ownership of Cache set to false results

  'normal way' for update page is generally very bad for applications based on JSF/ADF.

  Is there more evidence or reference documents to support above sayings?

  Well, when you use the "back/refresh" browser button, this will retrieve the Forms page cache and skip the controller of the ADF.

  You can use google to do this, for example:

  https://groups.Google.com/Forum/#! subject/adf-methodology/CKoDdhLdrYE

  ADF developers world: how to avoid the mistake Houston-35007?

  Andrejus Baranovskis Blog: How to manage the Web browser buttons in the ADF/WebCenter Applications

  Dario

• Current version of the data in the database has changed since the user has launched the process of update: tabular

  Hi people

  Version of the apex is 4.2

  Oracle database: 11.2.0.2

  I have created a simple form in a table on a table with the following structure

  {code}

  Name                                                  Null?    Type

  ----------------------------------------------------- -------- --------------

  TID NOT NULL NUMBER

  TEAM_NAME VARCHAR2 (30)

  EMP_NAME VARCHAR2 (30)

  DATE OF REPORT_DATE

  CATEGORY_NAME VARCHAR2 (30)

  NUMBER OF CATEGORY_HR

  CATEGORY_COMMENT VARCHAR2 (120)

  CREATED_DT                                                     DATE

  CREATED_BY VARCHAR2 (30)

  STATUS VARCHAR2 (1)

  {code}

  In the form of default table is

  {code}

  Select

  TID,

  TID TID_DISPLAY,

  TEAM_NAME,

  EMP_NAME,

  REPORT_DATE,

  CATEGORY_NAME,

  CATEGORY_HR,

  CATEGORY_COMMENT,

  CREATED_DT,

  CREATED_BY

  of ' #OWNER # '. " TIMESHEET.

  {code}

  I wanted to add an additional line inserted in the tabular presentation, that's why I included 'UNION ALL' in the query like this

  {code}

  Union of all the

  Select

  TID, null,

  tid_display null,

  team_name null,

  emp_name null,

  report_date null,

  category_name null,

  category_hr null,

  category_comment null,

  created_dt null,

  created_by null

  of the double

  {code}

  After having done that, I can see a blank line on the form of tables, but each time I fill data in the fields and press the "SUBMIT" button, I get the below error

  Current version of the data in the database has changed since the user has launched the process of update

  Thank you

  Navneet

  Why are you insert an extra line manually in tabular from?  There is a feature to add a line.

  If you want to insert a blank line when the page loads, then create dynamic action, this is a most appropriate feature.

  If you manually insert an extra line so that you have to write the update for this procedure.

  Leave.

• Reading file and dump the data into the database using BPEL process

  I have to read the CSV file and insert data into the database... To do this, I created some asynchronous bpel process. Adapter filed added and associated with the receive activity... Adapter DB has added and associated with the Invoke activity. Receive two total activity are available in the process when trying to Test em, receive only the first activity is complete and awaits the second receive activity. Please suggest how to proceed with...

  Thanks, Maury.

  Hi Maury,

  There is no need in step 2 that u mentioned above. I donot find useless a webservice?

  The process will be launched by the CSV file, then using the processing activity, you can put it in the DB.

  There should be no way where you can manually test it by giving an entry. All you can do to test is to put the file in the folder you mentioned when configuring the file adapter.

  You just need to have the composite as below:

  ReadCSVFile---> BPEL--> DB adapter

  And in your BPEL process:

  Recieve--> Transformation activity--> call activity

  Try to work on some samples listed on the oracle site and go through the below URL:

  The playback of the file adapter feature using

  Thank you

  Deepak.

• How to insert data into the database using smartview

  Hello
  I am trying to insert data into the database using * "Send data" * button on the Ribbon of Essbase.
  My database is empty.
  
  I opened an ad hoc network, it returns * "#missing" * in all cells
  I have modified the cells and provided data in the cells that I want to. Now, I supported on * "Send data" * button.
  It just reloaded the adhoc grid instead of submit data, I rechecked the data through data console Administrative Service are not inserted.
  
  I am following the right way to insert data? If not, could you please suggest me how (Populate) insert default data in the database?
  
  --
  VINET

  You go about it the right way, once you have submitted if you réactualisiez then data values should be there, if you POV is against members of dynamic calc and then data not written to the database, you need to check the Member properties of your POV.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Upload data to the database

  Hi all

  I have a problem with my request. I've created a sample application that I can show you my problem. I want my application to download data from database to the data grid - as ´s ok. But when I want toload data from database of the data grid, it doesn´t work - when I click on Update button, in early doesn´t of database connection. I use Wamp Server 2 to communicate with the database.

  I think that there is not problem in my source code (I checked so many examples). I think there is a problem with the Zend Framework - I'll try to explain this problem.

  I found that request not to upload data to the database when the folder structure is - look at photo. It is automatically created service in service folder - in my case Tabulka1Service). But what is confusing is that application downloads data from database without any problem:

  

  Request only download data from database when I move all the items to a folder of service - look at the picture. After that when I click the button it starts to connect to the database and downloads the data correctly.

  

  Why I ask you to help me with this problem?

  Because I think it is very bad practice to move items to the folder of service whenever I created new service - I have to completely reconfigure entire service after that - and his loss of time I think.

  I would be happy for all the help.

  Thank you

  Try

  tabulka1 = dataGrid.selectedItem as valueObjects:Osoba

  But u declare

  Tabulka1 id="tabulka1"/>
  

  your dataGrid consists of a crowd of valueObject:Tabuka1 or valueObject:Osoba?

  Here are the various objects you can not their equal.

  It is a good tutorial on youtube, just look at

  http://www.YouTube.com/view_play_list?p=D7BB0C9BF6C87881&playnext=1&v=x-Da1SD1Ykk

• Current version of the data in the database has changed...

  Hi, I have an updated report which hurts...
  
  This is the SQL code for it:
  
  Select
  "ITEM_BOM_LINE_ID,"
  "ITEM_BOM_ID,"
  "ITEM_ID",.
  "ID_PROCESSUS,"
  "SEQ,"
  DECODE (ID_PROCESSUS, NULL, QUANTITY, ") AMOUNT.
  DECODE (ID_processus, NULL, UOM_CODE, ") uom_code,.
  "VOLTAGE_PROBE,"
  'POSITION ',.
  "POS."
  "DESCRIPTION".
  of ' #OWNER # '. " TOFC_ITEM_BOM_LINES ".
  where "ITEM_BOM_ID" =: P20_ITEM_BOM_ID
  
  In that select it the ID_processus or the item_id is defined. Cannot assign at the same time.
  
  The description field is what hurt. When I run the page and try to write something in the description field on a line where ID_processus is defined this error appears:
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-20001: ORA-20001: current version of the data in the database has changed since the user has launched the process of update. current checksum = "B54E29267EC18630B58818FF4B710D41" element = '925466414031BD2DE082A6F954889340' checksum., update of "trailers". "" TOFC_ITEM_BOM_LINES ""ITEM_BOM_LINE_ID"= value: b1, 'ITEM_BOM_ID' =: b2, 'ITEM_ID' =: b3, 'ID_processus' =: b4,"SEQ"=: b5, 'QUANTITY' =: b6, 'UOM_CODE' =: b7, 'DESCRIPTION' =: b8
  
  It works fine when I write something in the description field on a line where item_id is not null. Also all other fields work perfectly.
  
  Can someone tell me whats wrong?
  
  Thanks :)

  Hello

  After a re-read of your OP, I noticed that
  DECODE (ID_PROCESSUS, NULL, QUANTITY, ") AMOUNT.
  DECODE (ID_processus, NULL, UOM_CODE, ") uom_code,.
  in your query.
  And it breaks when ID_processus is NOT NULL (and ITEM_ID is null), isn't?
  That's because you change (sort of) the QUANTITY and the UOM_CODE when that happens. Your query retrieves different values than those contained in the database (for example "instead of the actual value). And these 'new' values are compared with the values of database and then there is a difference. Where the error.

  But now: how to solve?
  What exactly are you trying to achieve with this construction? Is there a business rule that AMOUNT and UOM_CODE must be blank if ID_processus is not null? To add a constraint validation to your table and just show the values in your table. Or to show or hide a value of the terms of use. Or use another (made) column in your query that is not bound to a database field.

  I hope this helps...

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• How can I transfer data from the database in a variable (or array)?

  I made my request according to the example (http://corlan.org/2009/06/12/working-in-flash-builder-4-with-flex-and-php/). Everything works fine. I changed a single function to query the database - add two parameters and get the value from the table to a string format. A test operation shows that everything is ok. If I want to display this value in the text box, I just do drag and drop off service to this element in Design view

  (< s:TextArea = "153" x = "435" id = "nameText" text = "{getDataMeanResult.lastResult [0] .name}" width = "296" height = "89" / > ").

  Also, it works fine, just a warning and encouraged to use ArrayCollection.getItemAt ().

  Now, I want to send the value to a variable or an array, but in both cases, I get an error: TypeError: Error #1010: a term is undefined and has no property..

  How can I pass a value to the database in a variable? Thank you.

  public var nameTemp:String;

  getDataMeanResult.token = authors.getDataMean (arrayOfNumber [0], dir_id);

  nameTemp = getDataMeanResult.lastResult [0] .name;

  public var nameArray:Array = new Array();

  for (var i: uint = o; i < 3; i ++) {}

  getDataMeanResult.token = authors.getDataMean (arrayOfNumber [i], dir_id);

  NomTableau [i] = getDataMeanResult.lastResult [0] .name;

  }

  And how do I use syntax highlighting in this forum?

  Astraport2012 wrote:

  Thank you.

  Then this simple question: How can I place a mySQL database data in a variable using the wizards FB4 (connect with PHP)?

  If you can show examples please.

  I couldn't find examples. Send data to a field text or DataGrid - much, but no variable.

  the use of assistants? not sure... it is generally a bad idea to rely on them, because they will never fully what you want anyway. I would recommend learning abit of PHP and manage by yourself, because it allows you to manage everything exactly as you wish.

  small example of communicating with a database using PHP + FB4:

  mount a database

  

  write you a small script that will access your database, get a value, for example:

  ";
  
      while($row = mysql_fetch_array($result))
      {
          if($row['messageID'] == "3")
          {
              print $row['message'];
          }
      }
      print "\n";
  ?>
  

  This will get the message with ID '3 '.

  make an HTTPService in FB4 app to call this Script, as follows:

  and the value must be picked up by the Script and properly stored in a variable

  

• Error in inserting data to the database

  I use SQL to store the data when I'm insterting the data in my table and then I get the error 2147217833.

  The image that is attached to the table structure and PROCESS as I am recording insterting. I use LV2011.

  I am able to connect to the database but error by inserting

  Soved. UerId 5 and I've been insterting 6.

• Adjust the data in the database with the variables

  Hello

  For my internship, I have an assignment to read and set a database with the variables. This SQL server 2005 database contains variables of a controller. These are read and write variables. The assignment is to display the read variables and the user can adjust the variables of Scripture. The first part was "easy" because the forum contained a lot of examples of this. The second part is more difficult because the forum contains absolutely no example of this. Can I use LabVIEW 2010 and 2011, and also I downloaded the 30 day trial of the database connection tool. If it's useful, I can recommend my company to buy this package. Playback vi makes use of a UDL (Microsoft data link) connection.

  So you guys my question is: is it possible to adjust the specific variables in a database using LabVIEW? And maybe you can give me a little advice on this topic...

  Thanks in advance!

  Roy

  In SQL, the specific data are always selected with the keyword WHERE. In VI to update there is a link for options, you can for example add a constant 'WHERE id = 1457 and measure > 0.54 ".

  You can ofc. also build this chain through controls, settings and other means.

  If you prefer, you can use the Execute Query (under Advanced tab I think) to which you can send the complete query example "TestTable Update set name ="Zeus"where id > 14 and id.<>

  /Y

• Reading large data using the database connectivity

  Hello

  I use the Labview database connectivity toolkit to connect to my database sqlitev3 (I'm using ODBC). I just have to connect to the database (using the block of open_connection) and read all the values inside (using the select_data block). The problem is that my database is huge (about 2 GB), and I get this error:

  . VI NI_Database_API.lvlib:Rec FETCH Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCallerADO error: 0x8007000E Exception occurred in provider: not enough memory is available to complete this operation. in .vi NI_Database_API.lvlib:Rec Fetch Recordset Data (R)-> NI_Database_API.lvlibB Tools Select Data.vi-> real_web.vi-> real_web.vi.ProxyCaller

  What should I do? It seems that he reads the data in the memory and it doesn't have enough space for it. When I read the data I want to write to a file.

  

  Read it in pieces. Write each piece to the file, and then repeat with the next segment. Try to read and process all data in one shot is not very practical and you found out will not work.