Deactivation of the charms and green screen on videos

Similar Questions

• Windows XP 07 login I get the black and white screen where is safe mode option and then just loop it back to the same screen.

  When I powered on my Windows O.S. ' 07 I got the black and white screen where the option of safe mode and when I entered beginning that normally he just came back to the same screen of the suggestions?

  Hi RudyNY,

  1. you have Windows 7 or Windows XP installed on the computer?

  2. you receive an error during the process of loop?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Check to see if you can boot into safe mode in the Advanced menu options and the last good known Configuration.

  http://www.Microsoft.com/windowsxp/using/Setup/support/nostart.mspx

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How do I rename them.

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  Use BCDEDIT to SET the description that you are wanting to "Rename" and also to choose the displayorder, timeout and that you load by default...

  Maybe this old conversation will help you:
   http://www.SevenForums.com/general-discussion/20191-renaming-earlier-version-Windows-dual-boot.html

• I can't get the screenshot of Windows to function at work. I try to push the Windows and print screen key, but it does nothing.

  When I used Windows 8 Developer Preview screenshot function worked fine. The screen flashed and saved my screenshots. I pushed the Windows and print screen key. Now that I've updated, I can no longer do this. I am of ideas what is wrong. Any help would be great!

  P.S. - This is the account I want to use! So I thought to it. In the case of my laptop (HP HDX 16 t) I have to press FN + WINDOWS KEY + print SCREEN. If anyone has the same problem, they should try it.

• I bought CS4 - have the box etc serial # - use an IMac with Snow Leopard - went to use the bridge and a screen came saying Adobe Bridge HOme Service was interrupted to concentrate on other resources... uh, I bought this software and how can we now

  I bought CS4 - have the box etc serial # - use an IMac with Snow Leopard - went to use the bridge and a screen came saying Adobe Bridge HOme Service has been discontinued for focus on other resources... uh, I bought this software and how it can now be 'gone '? Pls help - bridge is very convenient and I paid for it!

  See here:

  Deleted Adobe Bridge Home service

• When you open a video all the getting is sound and green screen

  When to open a video all them get is sound, and how green screen I can see the video?

  Hello

  Try the following.

  Right-click on the video (green screen), and then select settings.

  Remove the tick from the box "Enable hardware acceleration", and then click Close.

  Refresh the current page, and see if the video is now Ok.

  Kind regards

  DP - K

• Re: Pink and green screen on the Satellite X 200

  A difficult for all a... my laptop screen is a nice pink and green but if I connect to my TV via HDMI, it works perfectly
  Thank you
  Trevor

  >... but if I connect it to my TV via HDMI works perfectly
  You did very good test. Graphics card is correct and troublemaker is LCD.

  On eBay you can find fairly cheap.
  Can share you one?

• Windows Movie Maker: Small video and green screen

  I've been taking videos on Movie Maker for quite awhile and I've never had a problem until today. I've got this show that I have edited. The preview reading is perfectly fine and everything works normally and then I publish. Publication is going smoothly, but something must of happened between this amount of time, because the video is now scrunch all upward on the top (its dimensions are now all distorted to extend over the screen to halfway) and on the bottom half there is just a green screen. It occurs only after the publication. I tried to change an option that I use when publishing... did the same thing. Then I thought maybe it was some kind of title effect I used... it's not. I tried to delete all the effects on my thing and editing like that... This isn't the problem. The only thing that could be a problem, it's that it's a different file, then I usually use I think that... I had like a torrent file, but when I look, it works well and is not. So I do not understand... any suggestions?

  I've been taking videos on Movie Maker for quite awhile and I've never had a problem until today. I've got this show that I have edited. The preview reading is perfectly fine and everything works normally and then I publish. Publication is going smoothly, but something must of happened between this amount of time, because the video is now scrunch all upward on the top (its dimensions are now all distorted to extend over the screen to halfway) and on the bottom half there is just a green screen. It occurs only after the publication. I tried to change an option that I use when publishing... did the same thing. Then I thought maybe it was some kind of title effect I used... it's not. I tried to delete all the effects on my thing and editing like that... This isn't the problem. The only thing that could be a problem, it's that it's a different file, then I usually use I think that... I had like a torrent file, but when I look, it works well and is not. So I do not understand... any suggestions?

  =========================================
  No guarantee, but it might be interesting to try to publish your
  project in DV - AVI instead of WMV format.

  (The following items should help explain how to save under)
  DV - AVI)

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista-
  Quality profiles / editions
  http://www.Papajohn.org/Vista-publishing.html

  And... the info... copied on the net... may be useful:

  =====

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  When I tried to follow the directions, I was unable to find XVid on my
  computer.  So I googled XVid and then (I think) the 2nd entrance to
  Download XVid.  After I downloaded it, I could follow the directions
  bernzilla and when I published a video - Voila! no green bar!

  After thick film Green line is published
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

  =====

  Good luck...
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Get a blue and green screen on windows 8

  I get a green or blue screen whenever I try to open a program, I bought the laptop 8 weeks ago, it gets frustrating because I can't do at all I can't even reboot I get a green screen

  Hi Kim,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that you have found a mistake on blue or green screen. Don't worry, will help you with the question.

  1. What is the brand and model of the computer?

  2. don't you make changes before this problem?

  3. What is the full error you receive?

  It might be because of corrupt or missing system files.

  Let us try the steps in the link below and check if it helps.

  Resolution error blue screen in Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• Casts a shadow on the ground with green screen images

  Hello

  I have pictures of green screen of a player market with a green screen. After the green screen overlay I want to cast a shadow of the object on the ground. Seems simple enough :-) I have tried everything I can think my green screen images like a layer 3D and then add lights, which appear to be rising shadows/light on the actor, but not cast shadows. Shadow a shadow directly behind the actor but no way to "move" it is on the floor.

  If someone could provide guidance, I would be very happy.

  Thank you

  Bob Barnes

  CantonVideoMan wrote:

  Hi bogiesan,.

  Thanks for the help.

  My film is shot with a green ground. The problem I have is that the final product must be an actor walking with a transparent background, but casts a shadow on the ground. So that the shaow displayed any context the customer decides to use the video with.

  If I try to apply a drop shadow or a radial shadow the shadow BEHIND the actor not appear below. I must do this 10 times more difficult it must be.

  Any advice would be appreciated.

  Thanks again,

  Bob

  I'm not enter the question, then, sorry. Just use the shade that you have captured. A chromakeyer to shadow is not difficult.

  The problem with faking a shadow is, Yes, it is ten times more difficult than do in the original shooting because of all the problems we have discussed. There is no interaction with the feet with a layer of shadow and 3D projection is realistic enough to be accepted by an audience; It will still look fake. You CAN create a 3D shadow carefully placing a light in a 3D scene and place a copy of your matted character perpendicular to the light source and by setting the layer to cast the shadow only. But this is not always true.

  bogiesan

• diplay is superior to the front and back screen

  original title: need help with the appearance

  My kids were playing on the computer and before my windows fit perfectly, but now everything is bigger and do not fit properly. How can I fix it? I have tried everything I know!

  Right click on a space empty on your desktop and select Properties.
  Click the settings tab.
  Drag the "Screen Resolution" slider to the right.  Do it slowly until you get the look you like.

• How can I get the effects of green screen with wmm xp

  I want to learn how to use windows movie maker xp for green screen effects

  You can find info if you are looking for a chroma key.
  There is a tutorial video directed by a young
  student at the following link which can help you
  get started.

  http://www.YouTube.com/watch?v=L78_GEx9Fhs

  In addition, Windows Movie Makers Forums could
  offer help.

  http://www.windowsmoviemakers.NET/forums/

• How to set the horizontal and vertical screen on my desk

  I have a problem remembering how to return to the setting of the vertical and horizontal on my desktop screen. Now, he threw my TV formatting to reports of the screen.  Text information on the programs and ads are either too high or too low on the TV screen, no matter how I ratios of formate the TV screen. This started after I messed up with the desktop screen ratios. I use my TV as a monitor for my computer. I forgot to write how I came to this page to adjust the ratio of the screen on my desk. I thoght I was in Control Panel, but I don't think. How do no wrong?

  Someone, anyone, please answer my question? I haven't gotten a response yet. I already gave on my model number, etc., in a previous post of my question. Please send me the answer directly, I don't check foroms. I don't like wading through all this stuff to get a simple answer to a question. Thanks again.

• Impossible to use the TV and computer screen at the same time

  I hooked my TV screen until my computer tower. I also have a separate computer screen. I set up two monitors in the display screen.

  However I can either use the TV as my computer or my computer screen as the screen. I can't use both, I have to make a choice. Is it possible that I can have it operational both at once? I am running Windows Vista Home Premium.

  (The problem is that my TV screen is more than 3 meters of my mouse, and if I can use it is a bit difficult. I intend to subscribe to BBC iPlayer and want to watch on my TV Samsung big)

  OK I solved the problem. What I did to go in my NVIDIA via the Control Panel, then choose the display settings in the menu on the left. Then, he would come with my two screens. I right click on the number 2, which is my main computer, and then in the menu that came I took the clone and then clicked on apply. So now, the two screens are working.

  I tried this before I sent it but no menu came have no idea why!

• No icons, taskbar, nothing other than the slider and a screen empty.

  I am running Vista Home Edition with Service Pack 2.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner