Dead man switch

Similar Questions

• Lollipop 5.0.1 - phone dead error

  Hello people!

  Today I got a message to update on my compact Sony Xperia Z3. I started the update, and after you download it, my phone off to install it. However, the only thing I got is an Error Message ("ERROR - update failed') with a dead-Man Android. I can't do anything now, he just keeps trying to start but after Startscreen of Sony, there is this error Message with the dead man android.

  • I tried to update with my laptop, but it is not even connect to it because it is not possible to turn on
  • I have reset and turned it off manually the several times, no luck yet
  • Reset while it is pasted done laptop Companion recognize the phone, but still can not update cause it loses connection

  I had the same problem with the first version of Lollipop and after a few hours, it worked to cause whatever it is. Now, I have the same problem and I'm starting to get really tired. Can't do anything with it, now already off for 8 hours, nothing happens except for the phone tries to start and this error message.

  Please help if you have had the same problem, I don't see more possible solutions.

  You may need to perform a repair of software using PC Companion. The process will erase all internal memory. You might need to charge your device for about 1 to 2 hours until the device has so at least 60% battery.

  Make sure that the device is not connected to the computer or laptop and turned off (sometimes you have to press the power button / stop and volume until what the machine vibrates 3 times or on some devices, it must push the small button near the tray on the back of the camera or SIM).

  Open PC companion-> support area-> update phone software / Tablet-> repair my phone/Tablet blue highlighted. Follow the steps, do not plug your phone until you are prompted to press volume down while plugging in the USB cable. If PC companion does not start the repair process, you may need to run Windows 7 compatibility mode (in some cases XP).

• Joined to a domain and an administrator remote after the installation of SP1, updated to 10 settings (clean install) then

  Wipe the hard disk, reformatted and did a clean install of OS7 home (fossoyées pro hoping group domain policies and etc. would not be a problem).  But they are still there. Reinstalled again.  I can't remove the files manually, give me permission. Loading guard who looks like a fake update file, but I can't delete that either.  I'm at my wits end.  I also have a problem with one of my Outlook email accounts, displaying a string of what looks like a key under my user name.  I have dealt with this for 2 months.  had my machine to two different local mechanics and nothing.  Even exchanged the motherboard and the drive.  How's it relate?  I do not even use the same key.  The only way he could do it is through my network connection. (Disabled Wifi too).

  I read something on the Panther Trojan and I do not have a file of Panther on my machine (which again, I can't delete).  I didn't even think that HOME version had this kind of remote administration and yet it moves it. Its load of 32-bit strange file and run it on a 64 bit system.  I don't know what to do from here.  I can't get a version of Windows installed which does not suck up all my processing power and crazy amounts of data transfer.  I pulled out an old HP Pav and am now loading XP on it.  At least I will be able to view and edit files it contains.  I don't think safe, even check my email on this machine. (I use my ipad for that).

  Here are the results of the queries from the command line, screenshots and event log shears.   Since I was the last reinstall at about 21:00 there are 294 Logon and created special logons.  Not to mention that I had an another windows machine and one android corrupt their hooking up to my Dungeon phone.  The worst is a 10 years ' worth of my design files holding external drive.  Sighhhhhhh...

  IM so sick of looking at this.  Im going to bed and hopefully not dreaming about it.  If someone can tell me how to stop this happening, I would SO appreciate it.  Support for Windows is a joke.

  I have run 3 different programs of Virus Scan on it, reformat the drive twice (wiped to zero once), and used three different install media (three different versions of Windows. 0 s 7 home, pro and pro OS7 OS10 (7 pro is what I was running when this began).)  Again, it is after that I paid two services of different repair to diagnose, pull the wireless network card, replace the motherboard and replace the disk.  After that I freaked out on them they began to throw the installation discs and Home keys. lol seriously, I might as well throw my money down a hole. (the key I've finally pulled the machine isn't that I've never owned?) I guess that's why I'm trying so hard to get pure installed, I already so much money in it.  I should probably just give up and load Linux.

  If I ever get my hands on this bloody trusted installer it is a dead man. Thanks in advance!

  Microsoft (R) Windows (R) operating system group policy result tool v2.0
  Copyright (C) Microsoft Corp., 1981-2001

  Created on 20/07/2016 at 23:03:12

  The RSOP data for OWNER-PC\Administrator on your PC-OWNER: Logging Mode
  ----------------------------------------------------------------

  OS configuration: Standalone Workstation
  OS version: 6.1.7601
  Site name: n/a
  Roaming profile: n/a
  Local profile: C:\Users\Administrator
  Connected over a slow link? : no

  COMPUTER SETTINGS
  ------------------

  The last time group policy was applied: 20/07/2016 to 22:31:33
  Group Policy was applied from: N/A
  Group Policy slow link threshold: 500 Kbps
  Domain name: 37L4247E29-32
  Domain type: Windows NT 4

  Applied Group Policy objects
  -----------------------------
  N/A

  The following Group Policy objects were not applied because they were filtered
  -------------------------------------------------------------------
  Local group policy
  Filtering: Not applied (empty)

  The computer belongs to the following security groups
  -------------------------------------------------------
  Required at the system level
  Everyone
  Builtin\Users
  NT AUTHORITY\SERVICE
  LOGIN CONSOLE
  NT AUTHORITY\Authenticated users
  This organization
  BDESVC
  BITS
  CertPropSvc
  EapHost
  hkmsvc
  IKEEXT
  iphlpsvc
  LanmanServer
  MMCSS
  MSiSCSI
  RasAuto
  RasMan
  RemoteAccess
  Annex
  SCPolicySvc
  SENSE
  SessionEnv
  SharedAccess
  ShellHWDetection
  wercplsupport
  Winmgmt
  wuauserv
  LOCAL
  BUILTIN\Administrators

  USER SETTINGS
  --------------

  The last time group policy was applied: 20/07/2016 to 22:36:33
  Group Policy was applied from: N/A
  Group Policy slow link threshold: 500 Kbps
  Domain name: OWNER-PC
  Domain type:

  Applied Group Policy objects
  -----------------------------
  N/A

  The following Group Policy objects were not applied because they were filtered
  -------------------------------------------------------------------
  Local group policy
  Filtering: Not applied (empty)

  The user is part of the following security groups
  ---------------------------------------------------
  None
  Everyone
  BUILTIN\Administrators
  Builtin\Users
  NT NT\INTERACTIF
  LOGIN CONSOLE
  NT AUTHORITY\Authenticated users
  This organization
  LOCAL
  NTLM authentication
  High mandatory level

  After you activate the hidden administrator account (which already had a defined password btw)

  C:\users\administrator>set
  ALLUSERSPROFILE = C:\programdata
  APPDATA = C:\Users\Administrator\AppData\Roaming
  CommonProgramFiles = c: files
  CommonProgramFiles (x 86) = c: Program Files (x 86) \Common Files
  CommonProgramW6432 = c: files
  COMPUTERNAME = OWNER-PC
  ComSpec=C:\Windows\system32\cmd.exe
  FP_NO_HOST_CHECK = NO
  HOMEDRIVE = C:
  HOMEPATH = \Users\Administrator
  LOCALAPPDATA = C:\Users\Administrator\AppData\Local
  LOGONSERVER = \\WIN-01J5F1J7NAH
  NUMBER_OF_PROCESSORS = 4
  OS = Windows_NT
  Path = c: Windows system32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\System32
  \WindowsPowerShell\v1.0\
  PATHEXT = .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC
  PROCESSOR_ARCHITECTURE = AMD64
  PROCESSOR_IDENTIFIER = Intel64 family 6 model 23 Stepping 10, GenuineIntel
  PROCESSOR_LEVEL = 6
  PROCESSOR_REVISION = 170 a
  ProgramData = ProgramData
  ProgramFiles = c: Program Files
  ProgramFiles (x 86) = c: Program Files (x 86)
  ProgramW6432 = C:\Program Files
  PROMPT = $P$ G
  PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
  PUBLIC = C:\Users\Public
  SESSION = Console
  SystemDrive = C:
  SystemRoot = C:\Windows
  TEMP = C:\Users\ADMINI~1\AppData\Local\Temp
  TMP = C:\Users\ADMINI~1\AppData\Local\Temp
  USERDOMAIN = OWNER-PC
  USERNAME = administrator
  USERPROFILE = C:\Users\Administrator
  windir = C:\Windows
  windows_tracing_flags = 3
  windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Cannot manage ESX server

  Hello

  I have a strange problem, I have a new installation of esx 3.5 on an HP BL20P G2 (version of Bios I04) Blade, I use a HP ProLiant BL p-Class GbE2 Interconnect Switch. I created a VLAN for management and added 1 NIC of blades and the external fiber port goes to the manement switch in the VLAN.  My management server, I can ping on the ESX host and checked the required ports are accessible (there is no firewall between the two). But trying to add the uning the just the customer gateway server or add it to my infrustucture Server I get the message "the request failed because the remote server has taken too much time to react."  He however reveal the warning for the first announcement of Cert and then gives this message some time after. The console service settings are correct on the map to the right.  I also can not web brows to it, gives me the waring for cert in the browser and then times out.

  Any help would be great please!

  We had a similar problem for awhile on our HP C7000 enclosure, it turned to be a configuration problem in one of our switches in the basket.  I'm not a guy of networking, but you can go through your switch box and check there is no configuration mismatches.

• Aspire switch 10 totally dead.

  My Switch 10 just died. I can't turn it on and the led is not even indicate charging when I connect the charger.
  It's almost as if the charger itself died.

  I contacted Acer support and I just it approved for the service. But as it is out of warranty, I have doubts about sending of it away. What can be the cost for troubleshooting?

  I've read about people having similar problems is solved by pressing power volume and simultaneously switch button, but it doesn't seem to work in my case.

  Hello

  You've found 4.2V and the battery voltage is 3.8V. This means that the battery is fully charged. I don't think that the issue is here.

  Did you check that the flat cable connectors have been inserted correctly?

  My opinion:

  "I can't turn it on and the led is not even indicate charging when I connect the charger.

  The power button is maybe defective (55.L47N5.001 - Audio card). Check visually.

• Carpet of dead idea A1 - switched itself off the coast, does not load

  Hi, can someone please help me? Yesterday my A1 itself turned off and could not Ωtre amorcΘ up/lit again. Thought it was at least 50% charged, but I tried plugging charger anyway. No answer, no charging orange or green LED but leave all night. Still not coming back to life. Tried to release the button "power" for 45 seconds then release and then press again for 5 or more dry (it was a suggestion on the web) - still dead. Don't want to lose this machine and what it has on it, but is there a solution? Help!

  Sometimes, the A1 is in a really bad locked, State where you can't turn it on and it will not respond to the charger - it is possible that this happened to your A1. If this is the case, then there are two options:

  1 jump the back cover off and disconnect reconnect it the battery

  2 wait for a long time (several days) so that the battery run completely, then try to plug in the charger.

  It is probably best to contact the support of Lenovo MrPeter1985 suggests, but if the data are really important to you, you can try one of the two steps above to see if you can get it to turn back this way.

• MagicJack + does not work on cable modem or netgear fs105 switch ethernet fast worked for the cable man and leave again

  someone must have same problem error3002

  Hello

  Error 3002 is a problem with their modem itsfailing to get an IP via DHCP

  I would ask to go through the following links.

  http://www.magicjacksupport.com/MJ-issue-causing-the-error-3002-T11363.html

  http://www.magicjacksupport.com/getting-error-3002-with-MJ-t11291.html

• PowerMac G4 does not switch on

  PowreMac G4 (digital audio 466 MHz) does not have the power switch on as if the power supply is dead.

  Just wonder if it is possible to fix food for myself.

  You can replace a PSU, if you can still find one. I do not repair.

  Another possibility is the PRAM Battery. Those that only lasts a few years, especially if you leave the computer unplugged a lot.  Most of this generation have a 1/2 AA 3.6 volt which is not the easiest to find battery. I usually order one of macsales.com, but you can get one from Radio Shack or a store of battery if you're willing to pay 3 x the price.

  PRAM of the Texas Mac, battery, PMU tutorial man - https://sites.google.com/site/macpram/mac-pram-nvram-cuda-pmu-battery-tutorial

  Reset the PRAM and NVRAM - http://support.apple.com/kb/HT1379 of your Mac.

  When to reset NVRAM or PRAM - memory http://support.apple.com/kb/HT1895

• HP Pavilion dv7t-6100: switch to ATI RADEON video card. Hang, reboot, and white screen.

  Hello.

  I was using my laptop as usual, and like many other times I have tried to swich for High Performance video card.  At this time, Windows crashes; So I had to press the power button a few seconds until the computer turns off.

  Then, when I turned it on:

  -Anything on the screen (on the screen of the computer laptop and external monitor)

  -Cannot access BIOS

  -No boot sequence (operating system does not)

  -Led is ON (without LEDs + turn signals)

  -Keyboard unresponsive (caps lock led for instance does not change when I press on it)

  I tried several suggestions "base" that I found on the Internet with no luck:

  -Unplug the power cable, remove the battery

  -Remove the battery from the BIOS, RAM, HARD drive

  -Press the on switch / off 60 seconds

  So I guess something is dead here.  Could it be that the RADEON card no longer works?

  When the computer is turned on, what card uses by default?

  Is it possible (not through BIOS, not through OS) to specify to use the integrated graphics card Intel? Removing the RADEON card (is that even possible)?

  Thanks in advance.

  Hi @fedecris,

  Thank you for the update. Q0F7E4-5R7894-MFH14K-403 P 03 error code indicates a failure of the memory module. Please see the guide to maintenance and maintenance for recommended replacements. (the link is in my post above) Note Chapter 3, page 31, paragraph 23.

• 1st generation ATV dead. Orange light but no screen and no resetting of distance.  I tried direct connection to Mac and iTunes open and he's not here.  Is it possible to restore to the factory without screen or remote work

  1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin

  I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.

  I guess you have not fed and attempted to restart.

  In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?

  Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.

• Dead hard drive. How to reinstall Windows 8 on a blank disc (HP Envy DV7 7332ea)

  My hard drive died too.

  Model m6-k125dx (jealousy).

  Same deal, no CD player, have a new hard drive that works.

  How can I get my software reinstalled on the new hard drive (an old man is dead, dead, dead)?

  Note: Went to the link above to look for drive of order recovery software but do not see it on the page.

  On top of that, this CD does me no good because I don't have a CD in the machine.

  You have a way to recover the software in this circumstance?

  Access the link below, near the bottom, there is a section of media recovery order for your model, you should be able to select the type of media some time during the order process.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-TouchSmart-M6-K100-Sleekbook/5401210/model/6879010

• Tecra M4 - dead battery - is this a BIOS or firmware problem?

  Hi all

  I'm on a Toshiba * Tecra M4 * model * PTM40E-01L01RGR * Bios version * 3.5. *
  From one day to the other, the battery is completely dead - this means time battery falls about 2 hours to zero in one day.
  Now, the battery may not be chanrged no more - it's as if there is none installed.
  So no start no power no power cord and if you unplug the phone cord is switched off immediately.

  From my experience if availability of battery becomes slowly shorter and shorter the battery is old or fails. But if she doesn't have a function from one day to the other, I'd say it's a typical problem of firmware or bios.

  Is there an update of the firmware or bios Tecra M4 (support page SAIS not - last date is 3.5 installed) or is it a software patch or solution that I can use to recover the battery live?

  Thanks for the help!

  Michael

  Hello

  All new BIOS updates are published on the European driver Toshiba page.
  If you use the latest version of the BIOS (compared to the version on the page), then other BIOS is not available.

  Of course, it of really strange that your battery doesn't work more than one day to the next, but I would still recommend a new battery to check because it s really sound like a battery problem.

  Cheers mate

• Google does NOT WORK with Firefox 3.6.8 and you can type in search, but clicking next is a link dead; does nothing?

  Google does NOT work on Firefox 3.6.8 suddenly today. You can type in search and get the results on the first page. By clicking on the link "next" or no matter what number links is dead. Yahoo and Bing seem to work. I don't have a Google toolbar. Very frustrating. It happens all of a sudden today. Please check into it.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  Your above posted the details of the system tampon() obsolete show with known risks of security and stability.

  • Shockwave Flash 10.0 r22

  Update the Flash plugin to the latest version.

  • http://www.Adobe.com/software/Flash/about/

• Satellite P10 switch randomly between battery and AC

  I have a satellite P10 who had some problems of strange power for about a year now.

  My laptop switch to the power of the battery even when it is plugged. I will then either use the computer until the battery runs out and turned it off or Hibernate in until the battery may charge.

  I thought that I had fixed by downloading and installing a new Bios from the toshiba site, which seemed to work for a while, but now it the problem seems to have returned.

  I also bought a new battery and the bar of power, thinking that was the problem... but it does not solve the problem.

  Someone else out there with similar problems, or a method to solve this?
  any thoughts would be great.

  Hi man,

  I had similar problems with my machine, so you can check some things:

  -When the CA is connected, then move him soft in all directions, there are maybe a few micro cracks on the AC connector.
  -try to boot your machine without the battery, your motherboard charging system is may be defective
  -Discover an another AC adapter, maybe the CA is defective

  If you encounter some strange phenomena as power cuts or no charge while you perform this action above, then you have definitely a hardware problem and you will need to contact your local dealer or the service partner for the other instance.

  So I had to do, and it's a faulty motherboard.

  Hope I could give you some ideas.

  Welcome them

• Satellite M40-313 is dead and no longer turns

  Hi all

  I have an old Sat M40-313, which worked fine for the last 3 years +.
  This morning, I found he was dead and would not turn back on. I tried the obvious things (I was a service engineer for many years in the 1980s on things like the PDP series, so some experience) as switching power supplies (I have had to change the diet before the summer that the cable was doubtful but kept the old one, in the case), but still could not climb.

  While I had a little browse (on another machine) to see if I could find some free hints, let him he connected with most recent feeding. When I went past, I noticed on the power lights. He started, but has lasted only a minute or two before dying again. Leave it plugged an hour gave me several minutes of use. I went to control panel | Power and had a look at the power indicator. He told me that he was in charge, but I noticed that the level fell. So obviously, the current will out of the battery faster going. He went from 11% to 7% after about three minutes, so I turned it off again.

  The most recent feeding is a vanilla object that I have purchased from PC City and is the original battery. Anyone have an idea how I can eliminate one of the possibilities of the equation, please? I don't want to buy a new battery if the problem is the power supply, and vice versa, so all advice is welcome.

  AAMT

  Ian

  Post edited by: IanJ

  Don't know how passed under the original subject line, so changed it back. Hey ho

  Hello

  You can very easily check.

  The laptop turns on if you connect the power adapter on the laptop (without battery connected)?
  If so, the adapter is ok and supplying power to the laptop.

  You need more instructions?