Dear gurus: help with options for upgrading memory on the DV7-1235dx

Similar Questions

• HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

  According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

  What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

  Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

  Also if this from the Manual:

  Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

  So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

• When I click with the right button of the mouse on videos from facebook it shows no options for me to copy the link and etc.

  When I click with the right button of the mouse on videos from facebook it shows no options for me to copy the link and etc. It only shows the parameters for the flash player. How can I fix?

  You can find the URL of the thumbnail by following these steps:
  In the context menu, choose {inspect element}.
  Now, you can see the URL in the source down (perhaps you click the small arrow to the left of the line of seledted firstly to show).

• can anyone help with drivers for Minolta Scan3 double for the Vista operating system

  If anyone can help with drivers for Minolta Dualscan 3 working with Vista?  3 Dualscan will work with Windows 7 or Linux?

  Hi Mike,.

  You can download and install the drivers for Minolta Dualscan 3 from this link.

  http://onyxftp.mykonicaminolta.com/download/Search.aspx?HT=

  Hope the helps of information.

  Please post back and we do know.

• Upgrade memory on the Satellite NB10t-A-102

  Hello

  on NB10t-A-102, I want to change the memory and the increase of 8 GB or 16 GB
  Can make us this change?

  Hello

  According to the specifications of the laptop RAM can be upgraded up to 4 GB, and obviously with 4 GB of RAM inside it is already on the maximum.

  Unfortunately on this forum we do not have much info on this new machine, but in the past we discussed on older models with 1 GB of RAM maximum but in the end, it was possible to update.

  If no one can help with this I recommend you try the upgrade with 8 GB of RAM to check how it works. Number of RAM you should test is PA5104U-1M8G.

  If possible, send feedback.

• Need help with upgrade memory on the Satellite A100-250

  Help me with upgrade memory on TOSHIBA Satellite A100-250 up to 1024 MB.

  I want to buy an another slat memory ddr2-533 512 MB, what model exactly I needed to research, they were working in a pair.

  Sorry for the bad English. From Russia with Love.
  PS. I like to drink Russian vodka :)

  Hay

  Your laptop can be upgraded up to 2 GB and compatible RAM is DDR2 400/533 1 GB (PA3411U-1M1G).

  Use this part number in Google and you will find it.

  Bye and don t drink too much Vodka. ;)

• Problem with the extended help display option for multiple displays.

  I have a laptop with an internal (#1) designated as my screen main screen. At work, I like to use the 'extended display' option for several screens to use the external desktop as #2 display monitor. However, at home I have the screen internal one on my laptop. So when I open an application like Excel at home, the window does not appear, but the application is running, as I confirmed with the Task Manager. So far, the only way I know to solve this problem at home is to change my display settings for multiple views to show on display #1 only. Is there a practical way to deal with this issue in addition to change the display settings whenever I move from work to home and vice versa?

  Hello

  In Windows 7, you can simply press the Windows Logo + P key.

  In the menu, select the item from the computer only .

  Concerning

• Need help with license for Windows store

  Hello! I have problem with Windows store, he says he has a problem with the license.

  It happened because I tried to upgrade my Windows 8.1 to Windows 10 and I've failed at about 20 times. Servers of M$ have been save this issue but they have not registered my fails so now servers $ M think I use illegal license for my laptop. My laptop is Asus F55A and I can not use the store because M$ servers does not allow me too.

  Please Microsoft something about it.i have legal Windows but probably your servers register this as illegal because I repeatedly upgrading to windows 10 who never worked and your servers did not know my fails.

  Please answer.

  Error with Windows store code "this application failed to start because of a problem with its license. Please try again later.

  Any help will be for me!

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing problems with Windows.

  I suggest you to refer to the suggestions of B Abid replied on 29 October 2012 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_store/unable-to-open-Windows-8-store/8a90d67e-9FEE-4B1F-A549-e702d0b207f4

  Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.

• Need help with drivers for Satellite P205-S6267

  I think I have all the drivers for my laptop, but I can't control the brightness of the screen or access capabilities of standby power. I downloaded tons of drivers power saver, and none of them work. Someone please help. I am running XP and the only driver I found is for Vista. I've been at this for two days... Please write to me at:

  [email protected]

  Hello

  Just FYI: whenever you need a driver download from http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp?

  As you can see your model of laptop is not yet supported for WXP and I guess you have to wait because you need precisely designed these tools and utilities for your laptop model. In the meantime, I think you can live without brightness control option. In my opinion, it is not so important. Also try to use the Windows power saver options. I'm sure you can use them up to what Toshiba offer WXP tools and utilities.

• What are my options for upgrading to Windows 2000.

  It of finally time to update my existing operating system, but do not have the time for a clean installation at the present time.  Can I switch to XP?

  Hi russman9785,

  There are five methods for installing Windows XP. Consider the following methods, and then select the appropriate method for your installation.

  • Method 1: Perform a clean installation of Windows XP
    Use this method for a clean installation of Windows XP. A new installation deletes all data from your hard disk by repartitioning and reformatting your hard disk and reinstall the operating system and programs empty (clean) hard disk.
  • Method 2: upgrade to Windows XP
    Use this method if you upgrade to Windows XP from Microsoft Windows 98, Microsoft Windows Millennium Edition or Microsoft Windows 2000 Professional.
  • Method 3: Install Windows XP on a new hard drive
    Use this method to install Windows XP on a new hard drive. This is usually done when a new hard drive is installed on your computer.
  • Method 4: Install Windows XP to a new folder (parallel installation)
    Use this method to install Windows XP to a new folder (parallel installation) to run two operating systems, or to access, repair, or retrieve data from a damaged disc.
  • Method 5: Perform a multiple boot operation
    Use this method to install Windows XP as a separate operating system on your computer. This allows you to install several operating systems on your computer, then select the operating system you want to use every time that you start your computer.

  For more information, see the following article...

  http://support.Microsoft.com/kb/316941

  Hope this helps

  See you soon

  Anand.

• Need help with MWI for voice mail on SIP with SPA9000

  I can't get my MWI to work with my answering machine SIP.  I have:

  SPA9000

  1 SPA962

  1 SPA941

  My ITSP is Mconnect and my SIP phone number is configured for line 1 on the SPA9000.

  I am using their voicemail.  I want the MWI light only on my phone SPA962.  I packed an id 1101 for this phone's mailbox.  I can press the message button and connect to my voicemail, but I don't get a MWI when I have new voicemail.

  Here are the settings for voicemail, I SPA9000 > voice > line 1:

  Mailbox repository URL: mysiptelephonenumber@line1proxy

  URL for mailbox management: even the form of mailbox repository URL

  Mailbox subscribe URL: it is indifferent to what I put in this context, nothing works.

  MConnect gave me a few things to try, but they do not work either.

  Any help is greatly appreciated.

  Marti

  I googled my question and found the answer here on this forum in a post from last year!  My MWI now works as it should when I have voice mail on my SIP line.

  Here is the link to the post on this forum where I found the answer:

  http://forums.linksysbycisco.com/Linksys/board/message?board.ID=VoIP_Phones&thread.ID=3899

  Also be sure to enter the URL for the mailbox to subscribe, filing and management.

  Mine are my number of mailbox @ the proxy for the line that my SIP line is activated, which is Line 1

  Marti

• can anyone help with drivers for invetel/coshiba 3887 rev0 vista

  can anyone help with drivers vista for invetel/coshiba 3887 rev0 54g wifi
  I looked everywhere goot virus and God knows what. Lucy was protected.

  Hello

  Method 1:

  I suggest you to see link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Method 2:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate

  I also suggest you contact the manufacture of the product and check.

• Need help with wireless for my x120e driver.

  This was the hardest thing ever. I've tried literally all the LAN and WAN wireless drivers under all 4 the x120e the driver options. Which is strange because there are 4 options for the x120e when looking for it. As noted here: (http://i.imgur.com/4K9sB.png). I'd love to help in getting the correct driver. Any help is appreciated, let me know if there are any other necessary information.

  
  

• Help with Setup for roaming on 3502 and 1252

  Hello everyone, I have a little suggest on how to set up roaming without having to connect different SSID. I find when I was at the Rochester Institute of Technology College, when I walk down the hall, I saw my phone wifi signal is never detached but seen 1142 (I thought to it what looks like design) change from green to blue in each location. My major is information & Computing studies at NTID.

  My current setup at home:

  1 Internet to untangle the firewall Cisco Catalyst Express 500 with PoE to two 3502i at home

  2 cisco Catalyst Express 500 to Cisco Catalyst Express 500 with PoE to two 1252 in the garage

  3 3502i and 1252 running IOS autonomous or independent

  And also we have smartphones, apple ipads and iphones and a laptop computer.

  I want to put the same SSID so they should connect automatically via roaming anywhere as LAUGHS and even double band should work also. I don't have a Windows Server or virtual WLC (should I get Windows Server 2008 R2 or 2012 of LAUGHS and I can download virtual WLC too). Will it work without WLC and server?

  In this case, if it is not possible without WLC so I want to know what requirement list so I can add to this to make it work.

  Gage Burchett wrote:
  Stephen,
  All of these AP are running WPA2-PSK AES + WPA-PSK TKIP (Cipher AES CCMP + TKIP) with same passhrase and same SSID. Any channel still work? Isn't 802.1x can be used with Windows Server that have RADIUS? Are you sure I leave these same configuration so it will roaming itself or client?
  

  I would stick with channels 06/01/11, standard no bunk channels for the side of 2.4 GHz.  For 5 GHz, any channel you choose should work as 5 GHz channels do not overlap.

  And Yes, provided that the mapping SSID, PSK and VLAN (if you make interfaces) is the same and there is some overlap between the signals of the AP, your customers need to wander between the AP very well.

  HTH,
  Steve

  ------------------------------------------------------------------------------------------------
  Please don't forget to rate helpful messages and mark the questions answers

• What are my options for upgrading to Acrobat 8 Pro?

  I have a user who sometimes creates and modifies forms using Acrobat 8 Pro. It uses Live Cycle for some forms. We need to upgrade it to a newer version. I am aware that Live Cycle is now a separate license. What are my upgrade options - if any? Just buy a new license for Acrobat Pro and Live Cycle? Can I still purchase XI or DC my only choice. We are not interested in the characteristics of the clouds.

  Thank you.

  You have no option to upgrade.

  You can only buy DC Acrobat from Adobe.

  You will need to purchase LiveCycle Designer separately.