Dear Sir, problem add-on with Erail.in. not showing is not available after the download places

Similar Questions

• Z400 disks with EFI partition not mounting after the Windows 7 Pro upgrade

  HP z400: after a repair/upgrade to sp1 of Windows 7 Pro (64), no matter what external disk with an EFI partition is not installed.  Player will be present in the BIOS and the management of drive, but without a letter. Cannot assign a drive letter.  All other discs mount correctly.  Disks with EFI partition will mount on other PCs.  All the drivers seem to be current and fuctional.

  I thought about it... after two weeks of puzzle, I finally found the cause.

  I run MacDrive 8 so I can play discs with HFS + formatting.  This program should be completely uninstalled and reinstalled after the upgrade.  I had turned it off before the upgrade, but it takes more than that.  Everything works now as expected.

  But wouldn't be INCE if Windows reads discs mac natively?

• Problem: My computer hangs and does not restart after the installation of MS Update KB2479628.

  Tuesday February 11 I turned my hp Compaq nx7300 off I saw that she was installing updates I thought that nothing of what I had set to automatic updates. On Wedndesday that I have tried to re - turn on my laptop it installed updates. I got a black screen with white writing. The laptop then ran restoration of boot, but he was not able to repair itself and turns off. I tried to turn it back on a few times that I was in total disbelief that a MS Update would do this to my computer, it still does not.

  I tried to start the computer in safe mode, but it does not work.

  I tried to do a system restore but evertime I tried it there was an error, I tried all eight restore points but all back "an unspecified error occurred during system 0x800700b7 restore.

  "In restoration of start I clicked on ' view diagnostic and repair details" it said all tests have been performed with success, but at the bottom it says ' root cause found - boot critical file D:\Windows\system32\ntkrnlpa.exe is corrupt.

  I had to reinstall windows 7 pro three times so far and have now developed to the point that it is KB2479628 update of MS that is causing the problem. I the have not installed this time and have had updates to the manual

  What can I do about this problem, I spent at least 20 hours on this problem now, and looking for the many other forum of people seem to have similar problems. I'm worried that KB2479628 will settle by accident when I want to install some other updates?

  My computer laptop originally had Vista Business top but has been upgraded to Windows 7 32 bit, clean install, I use Microsoft Security Essentials, I've never had installed norton or macafee.

  Thank you very much for all your time and your help is greatly appreciated, I'm sure I'll be at the time when SP1 is available.

  Until then your your :-)

• LR CC will not launch after the download. I have to do something with my standalone LR5 first version?

  I just downloaded LR CC after using the stand-alone version of the LR5. But when I click on the new icon of LR to start nothing happens. The splash screen appears for a split second very fast, but that's all. I tried to restart my computer, but still not launch. I have to do something with my LR5 first?

  Sign out of creative cloud and then reconnect...

  can do so via CC app or open LR5, help/disconnect

• Software Adobe will not open after the download and installation with a cloud of adobe creative

  So I installed a PC brand new, everything works well in addition to Adobe.

  Install the creative cloud works very well, and then download and install the applications of software like Photoshop, After effects, first etc...

  But when I try to open these programs it just does nothing. Nothing appears and I can't find any process in Windows Task Manager.

  I need to get this working ASAP, I had a few projects to complete.

  Would be very happy if someone could help me

  (Edit, I uninstalled all adobe software and reinstalled, but which does not either )

  Data sheet:

  

  Fixed, when I tried to install photoshop cs6 instead of cc, I got a popup that I have lack of liscenses.

  I totally forgot to turn off my old PC

• Using XP Professional... problems caused after the download of Service Pack 3

  Using XP Professional... problems caused after the download of Service Pack 3

  Using XP Professional... problems caused after the download of Service Pack 3

  Only these security updates are not downloaded successfully:

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2742596)
  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2756918)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2789643)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2804577)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2833940)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2844285)

  Microsoft Fix - It ran... computer & rebooted... closed repeatedly...

  Problem persists... Help!

  Lane

  It is a common problem with updates of .NET. Here are the steps I follow

  First try this...

  Download and run the Microsoft .NET Framework repair tool , then visit Windows Update and let it try to reinstall updates. Once it's done, scan again with Windows Update to ensure that they properly installed.

  If the above does not make it...

  Open Add or remove programs, click on .NET 3.5 and choose repair. I got around to test if this fix actually .NET 2.0 and 3.0 of the .NET also, but it's worth it. I do not know if it can also cancel updates already installed .NET. If so, they will reinstall when you perform a Windows update that is the next step after the repair.

  If the repair does not fix it, will add and remove programs and uninstall the .NET Framework 3.5, 2.0, then 3.0.
  Visit Windows Update, select Custom scan and under software, optional install this...

  

  It must be installed by itself. Windows Update will not let you do otherwise.

  When he did install (I forgot if she asks for a restart or what not), scan again and all updates for .NET 2.0, 3.0 and 3.5 of the .NET .NET must appear. Choose to install.
  A new analysis to ensure that they properly installed.

  If all goes well, that will solve the problems you face.

  Make sure you come back and let us know which method worked for you or if you still have problems, I have to run a cleaning tool.

  Good luck!

• I tried to backup my iPhone several times. I get a message indicating that some files were not available at the time of the backup. How can I solve this problem?

  I attempt to backup my iPhone several times and it does not backup. I received a message stating "several files were not available at the time of the backup. How can I solve this problem?

  Hello Lope8725,

  Looks like you are trying to backup either iCloud or iTunes, but you have found an error on files being unavailable. Can reply you with the exact wording or a screenshot of the message you are getting?

  In the meantime, you can solve the problem with either of those two sections depending on whether or not it's iTunes or iCloud:

  If iCloud backup could not be completed or if you can not restore

  or

  If your iTunes backup could not be completed or you cannot restore from a backup

  See you soon!

• When you try to upgrade to photos in app store I get this message "the object you requested is not available in the store US." does anyone else have this problem or can you tell me how to find pictures in the app store

  "When you try to upgrade to photos in app store I get this message"the object you requested is not available in the store US."does anyone else have this problem or can you tell me how to find pictures in the app store" someone else meets this.  Is it me or is it pictures?

  Ever photos first? It should have been included when you first update of Yosemite and now El Capitan. I know that iPhotos updates get a message like that, but I didn't know the Photos app with a message with it.

  Update to iPhoto to Photos for OS X - Apple support

• I was clear something in Add/Remove Programs, that my laptop go on restart, and after the disappearance of this button wiraless. I can't find it in the Control Panel, on the toolbar... How do I return it?

  Wireless

  I was clear something in Add/Remove Programs, that my laptop go on restart, and after the disappearance of this button wiraless. I can't find it in the Control Panel, on the toolbar... How do I return it? Sorry for the bad English.

  Hi Zeljka Djordjevic,

  ·         What program did you delete?

  I suggest to perform a restore of the system and check if the problem persists.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Original title: Pny flash drive problems

  I used my flash drives on my pc with xp as os without problem. I then took the same flash drive for my laptop with the windows operating system 7, I opened the files. Then I went to the computer with xp, and the pc does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Hello

  Do you see these error codes in Device Manager?

  Plug the flash drive and run the Fixit of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  See also the section below, which might be useful in solving the problems of USB devices.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• can perform us two actions with a single button in two clicks, one after the other?

  Mr President.
  
  can perform us two actions with a single button in two clicks, one after the other?
  
  I want that when I click on the button Add once it add data to the database and when I click again on this button it clears the form data to the empty fields.
  
  Concerning
  
  Tanvir

  In the code, it should be easy.

  The following code adds that a button called butman with text 'ADD '.
  It then registers a listener that will be called if the user clicks the button.

  This listener then calls the runAddData method if you clicked butman while it contained the text of "ADD" and it calls the runClearData method otherwise.
  That's why he will swap the functionality of the button between ADD and CLEAR on each click.

  final Button butman = new Button("ADD");
  butman.setOnAction(new EventHandler() {
            @Override
            public void handle(ActionEvent t) {
                      if (butman.getText().equals("ADD")) {
                                butman.setText("CLEAR");
                                runAddData();
                      } else {
                                butman.setText("ADD");
                                runClearData();
                      } // END IF-THEN
            }});
  

  I hope that's what you wanted.

  Further reflection.
  You might want to run the ADD and CLEAR methods in their own son so that it can run in the background without slowing down your user interface.

  I also reuse rather a single button for several features instead of to apply with hundreds of nodes used only rarely with masses of code to show and hide as needed.

• Could Calendar services not available after restarting LDAP problem?

  I followed the installation guide:
  
  https://wikis.Oracle.com/display/CommSuite7U2/communications+suite+on+a+single+host+%28Linux%29#CommunicationsSuiteonaSingleHost%28Linux%29-InstallingCommunicationsSuite7Update2Software
  
  I have correctly installed and configured the Server Update 2 Oracle UCS Sun7. Calendar works (if I don't reboot the server).
  
  
  However, when I reboot the server, calendar service is not available.
  
  
  Important information for when I installed Oracle UCS Dim 7 update 2 by following the installation guide:
  
  I noticed when browsing through files, there is already a folder "dsee6" for the Linux Oracle I started from. After the installation of the example for the Oracle Linux 5 with GlassFish install, I had to download a new directory server. By following the instructions on page 7 of the listed installation guide above, I did another folder "dsee7". I wonder if I would have never downloaded this new directory server by following the instructions on page 6 "obtain software". In fact, the installation guide does not mention where to find the directory server, so I went to the site of delivery and figured it out myself. in any case, in the section 'Installing and configuring directory server', #3, I was instructed to "mv dsee7/opt/sun/directory. In this folder, / opt/sun/directory/bin, there is '. '. "/ dsadmin" utility that can be run. This serves to do many things with the directory server, including start-up. This is how I started it:
  
  CD/opt/sun/directory/bin
  . / create/var/opt/sun/directory/dsins1 dsadm
  . / dsconf create suffix '0 = isp.
  
  Also, I downloaded the delivery directory server - Oracle Directory Server Enterprise Edition 11 GR 1 material Patch Set 1 for Linux x 86-64
  
  Then, I found myself running to implement:
  
  . / dsccsetup ads - create
  . / dsccsetup war-file-create
  $. / dsccsetup cocoa-reg
  . / dsccsetup State
  
  Then, it seemed that dcss agent is registered in the cocoa.
  
  So, if we pass to come to page 9 of the installation, "Preparation of the directory" guide, I ran this and prepared the directory. After installation is finished, I could restart the server directory without any problems, as long as I do not restart the machine. I would like to restart the server directory as follows:
  
  CD/opt/sun/directory/bin
  . / dsadmin stop-domain domain1
  . / dsadmin start-domain domain1
  
  However, if I rebooted the machine, I could always start and stop the server directory as shown. But the calendar Services were not available.
  
  The only reason I question this LDAP server that can be the cause of this is because at one point, I had configured the services to run at startup. I followed these instructions:
  
  https://wikis.Oracle.com/display/CommSuite7U2/start+and+stop+scripts+for+communications+suite+%28Linux%29
  
  I use a VMSphere client to host this set upwards. So, given that this point the configuration of services at startup, I rode hanging at the rear so that services are more fixed upward to run at startup. But when they were, and I restarted the machine, I could see 389 ldap errors in all directions. So, which drive me to roll my snapshot in effort to try to correct the ldap errors. I no longer get LDAP errors as I drove my instant return. But, as I said, I have no more services, including LDAP, to start Protocol started as shown in the above link that tells us how.
  
  After restarting, I run these commands to get the server up and running:
  
  Start the GlassFish server:
  CD/opt/sun/SUNWappserver/bin
  . / startserv
  
  Web start (mail server I think):
  CD/opt/sun/comms/messaging64/bin
  . / Start-msg
  
  Start LDAP (directory server)
  CD/opt/sun/directory/bin
  . / dsadm start/var/opt/sun/directory/dsins1
  
  Start Mysql
  CD/etc/init.d
  . / mysqld start
  
  All these commands complete without problem. I can connect on the web of convergence, I can hit the Managing Director, I can connect to the GlassFish administration console, and I can see my calendar folder when I hit him in the web (http://myServer.com/davserver/dav/home/userName/calendar/).
  
  So, in summary, I was wondering if anyone knows if it assumed that second directory server is causing problems since I started with Oracle Linux 5 and Oracle Linux 5 seems to have the dsee6 file already installed with it. Would be - why my calendar services do not start after reboot, but work before the reboot?
  
  
  (Also, all my messages to keep deleted.) Can someone please send me an email if someone Oracle is deleting my messages and tell me why they are removed? )
  
  Published by: ntfytim16 on March 5, 2012 07:41
  
  Some of my steps were unserviceable. Cleaned them is easier to understand.

  You stop/start the GlassFish server container:

  https://wikis.Oracle.com/display/CommSuite/Calendar+Server+7+Administration+Guide#CalendarServer7AdministrationGuide-StoppingandStartingCalendarServer

  Joe

• I have a laptop with Windows XP that show an icon connected to the internet, but I can't access the internet.

  Hello

  I have recently setup a wireless connection from my laptop on Windows 7 works very well. but I have a laptop with windows xp that show an icon connected to the internet, but I can't access the internet can you please help me.
  Thank you
  original title: wireless internet

  Do you receive kb from the internet source or is it local only, and when trying to access the page host does upward with the site not found or 404 error, have you tried to repair the connection, it could be your antivirus protection is blocking the signal.

• I lost 5 Lightroom bought in Dec 2014 and want to download another copy with a serial number.  It is not available on the site of Adobe Web and Im not interested in Lightroom CC.  Can you direct me to an appropriate site? Thanks Frank

  I lost 5 Lightroom bought in Dec 2014 and want to download another copy with a serial number.  It is not available on the site of Adobe Web and Im not interested in Lightroom CC.  Can you direct me to an appropriate site? Thanks Frank

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• All that I need is to install Adobe Photoshop CS6 on two computers, if someone could show me were to find the download that wouod solve my problem thanks

  All that I need is to install Adobe Photoshop CS6 on two computers, if someone could show me were to find the download that wouod solve my problem thanks

  Download the CS6 products

  Mylenium