Debug mode breaks to the switch, break, without breaking points statement

Hello

IAM using Labwindows CVI9.

IAM simulating a GUI, when my application is run in Debugmode, my app breaks to break switch statements

even if I did not break points.

I would be grateful if someone gives suggestions about this

Thank you & best regards

Suresh

Hello

previously, I've added a few variables in the Watch window to monitor when I set break points.

Now, I have removed all the variables in the Watch window.

Now, the application is not breaking up.

Thanks a lot buddy.

Concerning

Suresh

Tags: NI Software

Similar Questions

  • How to track down the STP with SG300-52 questions and SG300-28 - the command debug debug mode password?

    Hello *.

    actually, I'm trying to track down and identify serious problems of STP loop to my switch tree SG300-xy.

    For further investigation, I would use the CLI debug mode but unfortunately the

    debugging

    debug mode command is password protected. I always "DEBUG password: *" :-((

    Could someone please help with the password of the SG300-xy switches with 1.3.0.62 firmware debugging it please?

    Thank you very much in advance for your help and your response!

    Best regards
    Matthias

    Hi Matthias, debugging is to engineer end only, it has no practical use.

    Also, if you are unable to go to the debug console, it is unsupported.

    I don't know how you can have a loop spanning trees like the tree covering weight stops redundant links. So I think that you are either using BPMH and incorrectly labeled regions or added a vlan incorrect or these switches connect in a device that is not active PLEASE and causing the transfer of issues like that.

    Quite honestly if you have a loop of network which is so bad, the best thing to do is to unplug the 1 wire at a time until you see what link has caused.

    -Tom
    Please mark replied messages useful

  • How to start Firefox in Mode safe on Windows 8 directly from the Start Menu without switching to normal startup?

    Y at - it an option to start the firefox safe without having to open the firefox I have normal mode

    In Windows 7, there is an option to start Firefox in Mode safe in the Mozilla Firefox Menu

    You can start Firefox in Mode safe in two ways

    1. Hold the SHIFT key while double clicking on the Firefox icon in your desktop
    2. Press Windows key + R (open the command run) and type firefox-safe-mode
  • Integrated Pipeline mode breaks my CF11, but isn't the Classic Mode

    Hello

    I encountered a problem, costs after migrating to IIS 8.5 (from IIS 6), CF 11.07 - ent.

    What's a sense to the pros out there?

    Here's what I see:
    Taskman, as SOON as the bunch of JVM Max memory has been reached (for coldfusion.exe), CF will become partially or totally insensitive.

    I understand about connector tuning, and is not the problem here. Here are the lines of log isapi_redirect:

    ----------------
    This first line below is the LAST line in the log have to do with connections (as you can see, I'm away from maxing out. Also, my file server.xml MaxThreads and Timeout are set to 1600 and 60000 and I use it only a wsconfig / x and one application pool, for a total of 1600 connections. I was very stable with those same numbers in IIS6)

    [1532:3796] [info] ajp_process_callback::jk_ajp_common.c (2244): number of reuse current (cfusion) is 91 connection re-use max 800 and total number of endpoint 1600

    error condition then hits

    [1532:3796] [info] jk_open_socket::jk_connect.c (817): connect to 127.0.0.1:8014 failed (errno = 61)
    [1532:3796] [info] ajp_connect_to_endpoint::jk_ajp_common.c (1127): (cfusion) failure opening socket (127.0.0.1:8014) (errno = 61)
    ajp_send_request::jk_ajp_common.c [1532:3796] [error] (1787): failed to connect to the back-end (cfusion). Tomcat is probably not started or is listening on the port incorrect (errno = 61)
    [1532:3796] [info] ajp_service::jk_ajp_common.c (2903): request to send (cfusion) Tomcat failed (recoverable), due to the error when sending the request (try = 2)
    [1532:3796] [error] ajp_service::jk_ajp_common.c (2924): (cfusion) connects to tomcat failed (rc =-3, errors = 178, client_errors = 478).
    [1532:3796] [error] HttpExtensionProc::jk_isapi_plugin.c (2763): service () failed with http 503 error


    (I also sometimes see the following too)
    [1532:14080] [info] ajp_connection_tcp_get_message::jk_ajp_common.c (1401): (cfusion) cannot receive the message header response of tomcat, tomcat (127.0.0.1:8014) forced a close connection for socket 5684
    [1532:14080] [error] ajp_get_reply::jk_ajp_common.c (2376): (cfusion) Tomcat has failed or refuses the connection. No response has been sent to the customer (yet)

    Once the error condition starts, then these error lines much repeat several times (with different thread... number IE [1532:xxxxx] where 1532 is the PID for the IIS for application pool worker process I am).
    ----------------------
    CF then either freezes, or sometimes comes back to its own (maybe 20-30 minutes more later) and the isapi_redirect.log resumed normal activity (no more errno = 61) logging.

    ----------------------
    Can I disable the integrated Pipeline mode (which makes classic), reset, and the problem goes away.

    I'm a pure shop CF, no .NET or. ASP, CF just and static HTML on my IIS. I don't have a built-in mode. But since I read on google that Jakarta/CF is 'supposed' to play with Mode integrated nice, I am very concerned that my problem is a Canary in a coal mine, as it triggers the right when Max JVM is reached (!) which should have nothing to do with that because it is just engaged, not used, memory, right? It makes no sense to me.

    My summary index: CF instability/grip are triggered right when bunch JVM MAX is reached (as shown in taskman for coldfusion.exe), AND I use the Integrated Pipeline Mode instead of the classic mode. (Connector a bad update is not involved in this situation).

    Opinions?
    Thank you!
    Byron_K

    Welcome to Byron,

    Thanks for the reminder - check level CF update and if corresponding isapi_redirect.dll is applied.

    Lets say I find the details in isapi_redirect.log 'CF tomcat business secret', which are not well documented anywhere. Sometimes the content of the newspaper lack useful details or periods of information when you know its use occurs. Web research certainly seems to provide a lot of queues to tomcat tuning this product or this message given. What I note - when the CF Java part is down or having a problem

    the ISAPI log is more verbose.

    If you want to watch the Java CF memory use issues and GC you may well do to activate JMX with JMC (JDK Java mission control tool, suggest version 5.4 and above JDK 1.8u45 or higher). Why so much? It's free ($) and you get to see not only bunch, bunch no but what tomcat is doing as well.

    JMC, FOR EXAMPLE:

    Cordially, Carl.

  • App works perfectly well on the Simulator (using all modes) and peripheral when z10 in the communiqué of the execution and debug mode. But creates a 'SIGSEGV = 1 fltno = 11 ip = 781722ec error code' when the term is used.

    My application switches between two documents qml is a home page, and the other is actually a video player. Whenever I press the button to go to the video page, it crashes on my z10 and generates the error «terminated code SIGSEGV = 1 fltno = 11 781722ec = ip...» ". But on the Simulator, it works (without of course plays video). When I use the race version and the debug mode, it works perfectly on my z10.

    This problem occurs frequently when I add a new code element. First of all, it happened when I added a scrollview and container, and it's happening now again when a defined a struct in the header file.  It would be nice to ignore this problem? or y at - it some deeper underlying problem which is the cause

    Just tried, I received the SIGSEGV error too, it looks like parent to AbstractPane fixed it.

    void ApplicationUI::changeScene(const QString& newQmlFileName) {
        // Create root object for the UI
        QmlDocument *qml = QmlDocument::create("asset:///" + newQmlFileName).parent(this);
        qml->setContextProperty("_app", this);
        AbstractPane *root = qml->createRootObject();
        root->setParent(this);
    
        // Set created root object as the application scene
        Application::instance()->setScene(root);
    }
    

    My test project is also attached to this message.

  • The code works in debug mode but crashes when compiling in release mode

    I am facing the following problem. I have code that works well when it is run in debug mode. However, when I compile it in release mode and run the executable file, code freezes and does not work. The code acquires images from a camera of Hamamatsu. In debug mode, I'm able to acquire images permanently. However, in the release version, the code crashes after the acquisition of the first image.

    I use version 7 of LabWindows/CVI.

    I would be very happy if I can get any help/suggestions for this problem?

    Thank you!

    Kind regards

    Kaddour

    Neji:

    If you search this forum for "version crash debug" or "release version crash" or other similar expressions, you will find that it is a fairly common question.  Look through the other posts that you find here to see if something applies to you.

    The debug version does a few things like padding variable, then you can sometimes invaded your space variable declared without crushing the next variable.  In the statement, the variables are packed, so if you invaded one, you replace another.  Just a possible difference.

    You can do some things in your exit code to see where things get lost, as (temporarily using printf after several instructions at beginning and end of your loop to try to identify this failure of line of code.)

    Look through other threads for other ideas.

  • How to get disabled login user (without password) at startup, so NOT to SHOW at all and so after the switch, go to desktop directly

    Vista Ultimate 64-bit

    How to get disabled login user (without password) at startup, so NOT to SHOW it to all (and needed clicked) and so after the switch, go to desktop directly?

    Also after inactivity, how to not go to sleep mode and press "power on" to bring back?

    Hello

    If you want to start directly on the desktop?

    How to automatically connect at startup in Vista
    http://www.Vistax64.com/tutorials/66966-logon-automatically.html

    Or

    How to make Vista require a user name and password when connecting
    http://www.Vistax64.com/tutorials/89812-logon-username-password.html

    =========================================

    Start - Control Panel - Power Options - upper left - require a password on wake up
    tick her do not require a password - save the changes.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • No LAN after the switch mode user or sleep on Satellite L555-135

    If it can help someone,
    I had some problems after my L555-135 of wake-up after a sleep or when I used the switch user on Seven 64 mode.
    No network detected.

    I can't find any update on the Toshiba site or windows update.

    I download from the realtek site this driver and everything is OK now.

    http://218.210.127.131/downloads/downloadsView.aspx?langid=1&PNid=7&PFID=7&level=5& Conn = 4 & DownTypeID = 3 & GetDown = false

    It is really strange and shouldn't happen with the original preinstalled recovery image. All images are tested.
    In any case, thanks for the info and the link.

  • If in debug mode to do this, on the other...

    Hi, is it possible to check if I run the program in debug mode, and if so, a function performed, but if in release mode, to perform a different function? In other words, can ask questions if it is in debug or release mode?

    Thanks in advance!

    You can use the _CVI_DEBUG_ macro

  • I can connect with the Administrators account without starting windows in safe mode in win xp pro sp3

    I can connect with the Administrators account without starting windows in safe mode and if yes, how?

    If I ca not, how can I load the graphics in safe mode drivers as all graphical interfaces are not displayed correctly.

    Thank you, Andre

    If XP Pro using the Welcome screen, press CTRL + ALT + DELETE to bring up the classic login box.  In the connection box, type the administrator user name and password. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Modding administered a LGS326 - to THE switch to run from 12V DC supply.

    Hi all

    (Type this message again as the 'Preview' button has lost the original on me. Silly me thought 'Preview' meant "Show me what the message looks like" not "delete the message and show me a preview pane empty instead. My bad.  Edit: It would be because Linksys decided to spray on 50 domains JavaScript so NoScript says no.  What is wrong to put the JavaScript code on community.linksys.com with HTML code)?

    I'm implementing a cluster of virtual machines as an exercise in self-education. As an additional technical challenge, I design the system to run with 240V solar power backup. So ideally the whole system will have to run from 12V, coming from a battery of 100Ah. I'll expand on that later.

    Now, I did research the area and apart from some industrial switches which were mostly 100 Mbps and very expensive, there is almost no manageable offered 24 gigabit ports + held of the 12V. There is a possible market for Linksys. I don't need industrial design temperatures.

    After some research, I found myself buy a LGS326-UA, which runs the industry normally. It's 90% of what I'm after. 4 gal can do but I can work around that, it has sufficient capacity of VLAN for what I want.

    Out of curiosity, I cracked open box to see if it was possible to modify it to run from 12V. That's what I found: https://hackaday.io/project/10529/log/34622-modding-the-switch-for-12v-operation

    So the switch supports internally, 240V to 12V, then probably goes down after 3.3V / 5V. So certainly doable - warranty is not my concern here.

    I have a few regulators IDO (Micrel 29750) coming that should handle this. I probed around with a multimeter and can identify it seems to be a split of power supply 12 v on two pairs of drivers with non-standard color coding, so I'll have to move carefully, some tough filtering (a Bank of low ESR electrolytic) should do.

    Did anyone here tried a similar amendment before? All boards/traps to watch out for?

    (Edit to correct the really bad formatting.  Once more, in this world of vulnerabilities XSS, really should we spread the code 50 ways to Sunday?)

    Well, I did it.  For those who were wondering what the answer is, it should be a good starting point.  Essentially, the green/yellow wires are wires are the 0V and Red/Black + 12V.  They are parallel connections together, filled on both sides.  If you're unsure, you can check by returning the motherboard to the wire and looking for one of the pins on the electrolytic capacitors; the negative sides are marked, and you should find that there is a short to 0V on the negative side.

    Given there are a couple of supplies of switchmode step 12V down to the 5V and 3.3V, you are probably safe to go below 12V, I found myself using a small reg IDO, which keeps the power slightly lower at 12V and so far, the switch works fine.  No magic smoke yet. :-)

    The full project details are available here: https://hackaday.io/project/10529/log/36511-12v-regulator-installation

  • To open the app in the simulator of BB 10 Alpha Dev in debug mode

    Hello

    I develop black berry 10 webworks app. I use the latest version of the sdk provided and the dev alpha 10 blackberry Simulator to run the application. I am also using the ripple chrome emulator to test and debug the application.

    I want to debug the application on the simulator using the browser webkit or something like that, but for some reason I'm not able to do.

    While the application of packing, I inserted the - d option. It says on the bb site which

    "With your application running in the Simulator in a desktop browser, type http://:."

    I tried to but could not see the application in debug mode.

    I tried port numbers, since I was on the apache server

    8080,8181,85...

    Could any body help me with this

    Thank you very much in advance

    See you soon

    Because you added the - d option, it should work very well. All you need to do is put the device/Simulator in developer mode (settings-> Security-> Developer Mode) and I guess you have already done this. In almost all cases, I worked with BB PlayBook and BB10 all what you need to do now is the point of your browser Chrome this URL + port:

    http://:1337
    

    The INVESTIGATION period should not be the problem since you already deployed the app on the Simulator, I guess? So give it a try with the port number and it should work now.

  • Mode of the switch port to connect to a router

    I wonder what mode to set the switchport is connected to a router.

    I guess the cable between the router is connected to a port in trunk mode (for all the VLANS defined)? Then I Lass with gateways for VLANs pointing to the router routing interfaces?

    So in this way, if a neighboring switch does not know how to route a packet to an unknown IP address, the packet is sent on the trunk to the other switch. Here the appropriate VLAN SVI sends the packet to the appropriate router interface. Is this correct or nearly correct?

    Hi Atle,

    You can connect a trunk port or port access to a router. If you choose to use an access port, the router will form an adjacency only through the VIRTUAL LAN defined in this access port. If you choose a trunk port, you can use dot1q encapsulation on subinterfaces of adjacencies form on several VLANs. If you use a trunk you would this type of configuration:

    On the switch:

    item in gi1/0/1 interface

    switchport mode trunk

    switchport trunk encapsulation dot1q

    switchport trunk allowed vlan a to c

    On the router

    gi0/0.a interface

    encapsulation dot1q one

    IP address x.x.x.x y.y.y.y

    !

    interface gi0/0.b

    encapsulation dot1q b

    IP address v.v.v.v y.y.y.y

    !

    interface gi0/0.c

    encapsulation dot1q c

    IP address z.z.z.z y.y.y.y

    Here's a good tutorial on this subject:

    http://www.howtonetwork.NET/public/708.cfm

    Cisco service documentation:

    http://www.Cisco.com/en/us/docs/iOS/12_0t/12_0t1/feature/guide/8021Q.html

    To answer your question, you can use the router as a default gateway for hosts. In this case, should not have an IVR on the switch, except for MANAGEMENT purposes. Traffic from the hosts would take the path of the L2 to the router and then the router would make the next decision of transfer for the package. If you have two routers, you could do a safe for both routers and run a FHRP between them for redundancy.

    HTH

    Anthony

  • Debug mode turns off after clicking on the button

    Hello

    I am using the Debug Mode in order to track down a problem, but when I click on an application button on a page in debug mode is disabled so I don't get the debug output that I'm after.

    In short, I do the following:

    (1) changing the page in the Application Builder
    (2) by clicking on the button "Run" to run the page
    (3) by clicking on the "Debug" button to activate the Debug Mode. The page is redisplayed with the release of debugging among the elements of the page then.
    (4) I then type some text in some fields in a form region and click on a button in the same region to create a record. The same page then reappears, but the Debug Mode is now disabled.

    Then I tried something similar using the schema of example COMMAND under the user name and a different workspace, and this time in debug mode is stayed on until what I turned off it explicitly.

    Is there something I need to do to keep active Debug Mode?

    Kind regards.

    John.

    John,

    The branch set on the page determines if the current value of & DEBUG. is used in the URL redirected to. In principle, which would not be resolved. You would have to edit the branch (and make a f? p URL with & DEBUG or debug position YES.)

    Scott

  • Activation of NPIV will restart the switch... Immediately?

    Hello world

    I need to enable NPIV on a Nexus 5000, and I found out how do in the following link,.

    http://www.Cisco.com/c/en/us/TD/docs/switches/Datacenter/nexus5000/SW/co...

    To activate the NPV, perform this task:

    Command Purpose

    Step 1

    switch # configure terminal

    Switch (config) #.

    Go into configuration mode.

    Step 2

    Switch (config) # enable npv

    Mode of VAN. The switch restartsand he comes back to the top in NPN mode.

    Note a write-erase is done during initialization.

    But I need to know about the restart. It will reboot immediately after enabling the NPIV feature or I could restart the switch when I coralie?

    Best regards

    Gonzalo Arroyo

    Hi Gonzalo

    The difference between VAN and NPIV can be found here:

    http://www.Cisco.com/c/en/us/support/docs/storage-networking/MDS-9000-se...

    NPIV is a feature and does not require a reboot; There is no break in service!

    NPV requires a reboot, all existing configurations are part!

    Walter.

Maybe you are looking for

  • How to save documents and pictures on an iPad Pro

    I have a macbook air and want to move to an iPad Pro.  I would not have a laptop.  Is there a way to save my Word Documents and Photos.  Can I put on a Flash drive and then upload them to the iPad Pro. Just to let you know, I don't have much else. I

  • Satellite P10 722: how to move to TV - S-Video

    can someone answer me please this quick question? I have a satellite p10 - 722 with a s-video output, if I was to plug in a normal s-video cable to this to my TV that I would be able to view my laptop on my TV? Thank you for all the answers

  • RDBMS Synch question

    I created an AccountsAction.csv file which synchronizes every day with our ACS SE 1113 4.1 device. In the .csv file, each created account has the 3 following elements included in the attachment. Now my question is, you can see the expiration date, bu

  • Cannot delete shortcut

    I have a "Calculator" shortcut in a folder on my desktop. It became unusable and I am unable to remove it. I get a message saying that I need permission to move to remove the icon, but I am the administrator on my system. I tried to delete it in safe

  • BlackBerry Smartphones BB 9860 THERMAL UNIT WHEN the DATA SERVICE IS

    Nice day Can you please help me. My BB 9860 heats up when using data services. I can't use it on net because it can become hot as high as 40 degrees Celsius. I checked by a technician and the problem was not resolved. I did the following, but it does