Debug the device - missing .debug files - debugger does not slaughter

Hello world

I'm trying to debug on my bold 9700.

If I attach the debugger to the jde to my device through debugging--> join to---> Pocket I can see debug messages in the output window of the jde. But the debugger does not stop at breakpoints also I get error messages while the debugger is endearing to the device. Missing files 'net.rim.cldc' etc.

Searching the Internet has proved I have the specify a location where the debugger can find the ".debug" missing files.

I hope someone can tell me where to download these files f *. I'm tired of searching...

Thanks in advance

Harry

Hello. Debug files are provided with BlackBerry simulators, so you can install a BlackBerry Simulator that corresponds to your version of BlackBerry device software.

BlackBerry simulators can be downloaded here: https://www.blackberry.com/Downloads/entry.do?code=060AD92489947D410D897474079C1477

Best regards, Dmitry.

Tags: BlackBerry Developers

Similar Questions

  • The computer seems to be configured correctly, the device or resource (DNS server) does not

    When I tried to fix this using other threads, none worked any other suggestions?

    Original title: your computer seems to be configured correctly, but the device or resource (DNS server) is not responding. I tried all of the solutions none works

    Hello

     

    This problem is limited to a specific Web site or with everyone?
     

    You can approach this problem in two ways: first by simply disabling the cache, but also by restarting DNS client service, which manages the cached DNS queries.


     
    Method 1: Clear DNS Cache

    a. click Startand type cmd in the Start search box.

    b. right click on cmd in the list programs, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    c. at the command prompt, type the following line and press ENTER:

    ipconfig/flushdns

    Usually, it clears up any issue that may occur.


     
    Method 2: Restart the Service DNS Services

    a. Click Start and run, type services.msc, and then click OK.

    b. double-click the DNS Client service. If you receive a Configuration Manager message, click OK.

    c. in the Startup Type list, click on restart and then click OK.

    d. close Services.

    e. restart the computer.


     
    Method 3: Configure the connection to obtain an IP address automatically

    a. click on 'Start', enter "NCPA. CPL' (without the quotes) in the search bar and press "Enter."

    b. right-click on the network connection, and then click on 'Properties'. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    c. click on select 'Internet Version 6 (TCP/IPv6) Protocol' and then click 'Properties' of .

    d. Select "obtain an IP automatically" and "DNS server automatically get an address.

    e. click 'OK'.

    f. highlight "Protocol Version 4 (TCP/IPv4) Internet" and click on "Properties". "" "

    g. Select "obtain an IP automatically" and "DNS server automatically get an address.

    h. click on 'OK'.

    i. restart the computer.

  • Refine the tool missing - select and mask does not work on hair

    I also do not know how to use this tool. I need to select the edges of the hair and used the brush once I was inside the dialog box refine edge. This allowed me to use the brush on the edges of the hair, and he would choose loose bristles. Now select the and mask feature selects a large part of color that is affected by the brush and does not select just the strands. So I find myself with a person's head and a blob of 3 inches from the bottom red on each side of the head, because it acts as the tool magic wand or quick selection instead.

    How to make a selection with the lasso tool, then refine the edge and select the hair? I often hear to use the pen tool, but who's transformed into a selection eventually anyway. Is not wise to make a selection tool feather each and every time you want to select the hair - I make a selection of the entire body of the person and what part of it can refine the edge. Totally lost on how to select just the hair strands and refine the edge.

    Hello

    See this post: refine edge is back

    Stone

  • Your computer seems to be configured correctly, but the device or resource (DNS server) does not

    Yesterday afternoon after NO change in the system, I lost my Wired internet connection on my Dell XPS 630i running Win 7, but all the other wireless devices in the House are still able to connect to the internet.  I tried:

    * power cycle router, modem, etc.
    * reset the router (then reinstalled)
    * cables
    * checked NIC as much as I can because it is "integrated" and not his own card NIC I can reinstall (the light is on and says Windows adapter works)
    * all connection settings are set to automatic (without static IP)
    * I have also read through all the other posts with this same error message and tried everything listed there

    This morning, I tried to connect to a wireless using a Netgear adapter from another computer to work in the House.  NETGEAR said it is connected to the network, but I still have no Internet with the same error message as above.

    Help!

    If you did the Windows updates, then I should have mentioned that the KB2705219 update could be the cause and uninstall that solved the problem for some users.  To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

    But if you have McAfee then see this McAfee reviews.

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    While it remains the case that uninstall Win7 KB2705219 solved the problem for at least two users update, you should do the fix McAfee, if necessary.

    I have McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee without following their abduction - Reinstall procedure would have upgraded my PC at risk by not updated. Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

    I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  • How to apply the upload of a file that does not create an error in edit mode?

    Hello

    It seems rather simple, but maybe I'm missing something (hoping that I'm not)!

    We use the Apex 5.0.1, but I believe that this is the case for other versions as well. At least that which was already identified and fixed in the latest patch.

    Here's the scenario:

    1. we have a table EMP where we maintain details about employees.

    2. we have an EMP_FILES table where we maintain one or more document (s) of support for each employee.

    3 page P1 displays the details of the PMCS with an IR showing the list of documents associated with this employee. This page also has a button called "New Document" when you click on it, takes users to P2 where they can upload a new document. The IR has an 'Edit link ' who also takes users to P2 where they can modify the file information (such as comments, date expiration etc.) or replace an already the document with a new document.

    4. we need to force users to download a document, when they save it in P2, then the easiest option was to highlight ' required ' 'Yes' as shown below:

    5. This works very well for a 'New' file upload / insert features.

    6. when users click on edit link to access the P2 and if they do not want to replace an existing document with a new document, but want to update the rest of the file info (like comments, expiration date etc.), it throws errors illustrated below:

    7. to address this problem, we put 'Value required' on 'No' and check the length of the BLOB in DB trigger BEFORE INSERT or UPDATE, as shown below:

    CREATE OR REPLACE TRIGGER BEFORE INSERT or UPDATE ON Biu_files files FOR EACH ROW

    DECLARE

    BEGIN

    IF NVL () DBMS_LOB.getlength () : NEW.fle_contents ( ), 0 ) < = 0 THEN

    RAISE_APPLICATION_ERROR () -20000, 'Please make sure to download a file not empty'. );

    END IF;

    IF THE INSERTION

    IF : NEW.fle_id IS NULL THEN

    SELECT fle_id. NEXTVAL IN : NEW.fle_id FROM dual;

    END IF;

    ((: NEW.fle_created_by: = APEX_CUSTOM_AUTH.get_user ( ) to REPLACE NVL( ) , "person", USER (), USER ();

    : NEW.fle_created_dt: = SYSDATE;

    ELSIF UPDATE THEN

    ((: NEW.fle_modified_by: = APEX_CUSTOM_AUTH.get_user ( ) to REPLACE NVL( ) , "person", USER (), USER ();

    : NEW.fle_modified_dt: = SYSDATE;

    END IF;

    END;

    /

    SHOW the ERRORS;

    8. If I understand correctly, the file upload in the APEX is nothing other than an action of 'INSERT + UPDATE' in the same folder. For example when we upload the fresh file, it creates a record with EMPTY blob and immediately update the record with the contents of the blob. Thus, regardless of whether or not users select a file, it would raise an error as mark is right at the top of the trigger code.

    9 ok, well move this piece of code at the top to UPDATE section because we want to allow the insert 1 to cross. But the problem is... Download the second part of the APEX file, which is updated would happen only if there is a selected file. If there is no file selected, ONLY the INSERT is pretty good. Thus, within the section of UPDATED trigger validation would never run for a fresh download.

    If someone has encountered this? I can't imagine that we are the 1st :-). Happy to provide / discuss it further. Thank you in advance!

    Kannan Kumara says:

    It seems rather simple, but maybe I'm missing something (hoping that I'm not)!

    We use the Apex 5.0.1, but I believe that this is the case for other versions as well. At least that which was already identified and fixed in the latest patch.

    Here's the scenario:

    1. we have a table EMP where we maintain details about employees.

    2. we have an EMP_FILES table where we maintain one or more document (s) of support for each employee.

    3 page P1 displays the details of the PMCS with an IR showing the list of documents associated with this employee. This page also has a button called "New Document" when you click on it, takes users to P2 where they can upload a new document. The IR has an 'Edit link ' who also takes users to P2 where they can modify the file information (such as comments, date expiration etc.) or replace an already the document with a new document.

    4. we need to force users to download a document, when they save it in P2, then the easiest option was to highlight ' required ' 'Yes' as shown below:

    5. This works very well for a 'New' file upload / insert features.

    6. when users click on edit link to access the P2 and if they do not want to replace an existing document with a new document, but want to update the rest of the file info (like comments, expiration date etc.), it throws errors illustrated below:

    Set the validation property default value is required on file upload on No.element.

    Create a validation of Non Null point about to file download pages and subordinate, for example the button CREATE is clicked and the PK null line item. This will ensure that the validation is done only when you insert a new file and check the updates that do not involve a file upload to be accepted without error.

  • The fonts in the fonts on Mac file appearing does not in Photoshop [was: Fonts]

    I installed fonts in the fonts folder on my mac, but they are not displayed in photoshop. What I am doing wrong?

    Nice day!

    Please check

    http://helpx.Adobe.com/Photoshop/KB/troubleshoot-fonts-Photoshop-CS5.html

    Kind regards

    Pfaffenbichler

  • Windows Network Diagnostics error message: "your computer seems to be configured correctly, but the device or resource (DNS server) does not.

    Everyone,

    I'm trying to configure the WIndows server.  I am running the following: Windows Server 2012 R2 Foundation.

    I did the following:

    1. I crossed the Config Wizard on domain Active Services and installed it.

    2 then I joined the field.  When I reboot the server, I get the following error:

    A. "your computer seems to be configured correctly, but the unit or".

    "resources (DNS server) is not responding.

    A1.  When I put a static IP address on DNS, I can't go to the Internet.  Even if

    I can go to the tank and the PING of the IP address and everything is good.

    A2.  The I change the DNS to get the IP address automatically.  Then I can get to

    the fine of the internet, but I still get the same message about a problem with the

    DNS server.

    Can someone guide me please what the issue is here?  Thanks in advance.

    3. Furthermore, I can't see the new server name/information when I go into Windows Explorer

    as part of the network.

    A. I'll go in Windows Explorer and see the other machines when I look at the network level.  Yet,.

    for the that set up simply, I can't find it, please help.

    Thanks in advance.

    Jerry

    Hi Jerry,

    I would like you to post your question in the forums TechNet for assistance:

    https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    I hope this helps.

  • Why if a system is xp and one system is windows 7 and the two connected to the local network, but file-sharing does not work

    a system is xp, another system is windows 7 basic and both connected to the local network, after you set up shared drive, mowing arrives not

    Hi Abhay,

    I suggest disable you the password protected sharing and check if it helps.

    Networking of computers running different versions of Windows

    Note: Follow the steps in the section "to enable sharing protected by password in Windows 7" and turn off password protected sharing.

  • Unable to connect to the Internet error message, "(serveur DNS) does not". "

    Original title: connection to the Internet.

    I am really a novice in computer science.   The wifi signal is strong and I'm connected to the internet, but I can not connect or when I do connect it falls to me as soon as it connects.  Where is my problem?   the only statement I received is that the computer is configured correctly, but the device or resource (DNS server) does not.   Can anyone suggest what to do next?

    Hello

    This problem may if the router is not configured correctly or if the TCP/IP settings are incorrect.

    1. What is the brand and model of the computer?

    2. when, exactly, you get this error message?

    I suggest you try the procedure described in the article and see if it helps.

    Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7
    http://support.Microsoft.com/kb/2779064/en-us

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Debugger does not move to the breakpoints on the device and Simulator

    Hi all

    my Blackberry 9800 recently got updated to v6.0.0.534.

    I use BlackBerry java plugin in Eclipse.

    The details are the following:

    BLackberry Java Plugin version 1.3.0.201102031007 - 19

    BlackBerry Java SDK's 6.0.0.30

    And the JDE is 6.0.0

    First of all, there are some files missing debugging, I have that and earlier was able to debug properly.

    Now he comes into debug mode, but does not touch the breakpoints.

    Hi all

    I've had this work now, I cleaned up the Simulator and then deleted these files:

    . COD

    .jar

    . Debug

    .jad

    . CAP

    .

  • The next missing music files - error C00D1197

    Hey all :)

    My error:

    Media player error C00D1197 message when you use Windows Media Player - missing files.
    How and why this occurred yesterday the files were there and played very well today gone?
    What can I do to recover my years of music collection?
    Thank you
    Mariana

    Hello

    You did changes to the computer before the show?

    Method 1
    I suggest you to run the fixit from the following link:

    Fix Windows Media Player video and other media or http://support.microsoft.com/mats/windows_media_player_diagnostic/ question library


    Method 2:

    It could be that the Windows media Player library is corrupted. I suggest you to rebuild the Windows media player library.

    Rebuild the database of Windows Media Player
    To do this, follow these steps:

    a. exit Windows Media Player.
    b. Click Start, player type%LOCALAPPDATA%\Microsoft\Media in the Start Search box and press ENTER.
    c. Select all files in the folder and then click on delete file menu.

    Note: You don't have to remove the folders that are in this folder.

    d. restart Windows Media Player.

    Note: Windows Media Player automatically rebuilds the database.

    If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

    -Exit Windows Media Player.
    -Click Start, type%LOCALAPPDATA%\Microsoft, in the start search box and press ENTER.
    -Select the folder Media Player and then click on Delete on the file menu.
    -Restart Windows Media Player.

    Method 3
    I suggest that you want to run system restore to the date it was working fine.

    How to restore Windows XP to a previous state
    http://support.Microsoft.com/kb/306084

  • CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

    I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

    http://support.Microsoft.com/kb/982116/en-AU

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    See if the information above solves the problem.

    See you soon.

    Mick Murphy - Microsoft partner

  • Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

    * Original title: Question of re-Installation of operating system.

    I got the message during win 7 / Win 8 installation.

    "the file is maybe damaged. the file header does not match the checksum calculated.

    My config - processor Intel C2D, 2 GB of RAM, Intel motherboard, 500 GB HARD drive

    I have also replace Win 7 DVD and DVD player also replaced.

    I also reinstall my single RAM chip so many times. but the problem still exists.

    During Win XP SP 3 installation, no such message type not displayed. I can install it easily.

    Pls help me Sir, I would like to Win7 in my computer again.

    Hello

    Thanks for posting your query on the Microsoft Community.

    According to the description of the problem, it seems that you are facing the question with the reinstallation of Windows 7 on your computer.

    Because the computer does not recognize the CD - R into the DVD player probably boot order is set to hard drive first. I suggest to change the DVD boot priority in the BIOS and then try to perform the Startup Repair.

    Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    In order to make changes in the BIOS, I suggest you to contact the manufacturer of the computer.

    Method 1:

    Unplug all external devices connected to the computer with the exception of the keyboard and mouse and check if the problem persists.

    M odes 2:

    If the problem persists try the Startup Repair. It is one of the recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc. To learn more about Startup Repair , you can refer to the below mentioned article:

    http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

    Method 3:

    In addition, if startup repair is not enough, you can perform a system restore, check if it helps you to solve the problem. For reference, you can see the article mentioned below.

    What are the system recovery options in Windows 7?

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

    I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

    The "import" tab appears only when the iPhone is connected to the Mac via a USB port.

    ITunes detects your iPhone when it's connected?

    If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  • When I click on the tab with a + on it, located next to the current tab, a new page does not open. If I click on 'New tab' in the file menu, a new tab do not ope

    When I click on the tab with a + on it, located next to the current tab, a new page does not open. If I click on 'New tab' in the file menu, a new tab does not open.

    Thanks for posting the details of your system. I'm skeptical about the "CompTool0234 Community Toolbar". Could you disable some add-ons and see if that helps.

    On this tab:

    Firefox orange (or the Tools menu) button > addons > Plugins category

    Disable «Conduit Plugin»

    On this tab:

    Firefox orange (or the Tools menu) button > addons > Extensions category

    Disable the CompTool0234 community toolbar.

    Then very probably a link will appear to restart Firefox to make the change. Does make a difference?

Maybe you are looking for

  • Solved

    issue is resolved, but I do not know how to remove or is it delete button?

  • Satellite Pro 4280 - what is the size of the HARD drive?

    I just bought a laptop Toshiba Satellite Pro 4280. According to the manual, it should have a 6.0 GB HDD but in my computer it is shown as having only a 1.34 GB capacity. PS I formatted the disk to remove the former owner data and operating system and

  • Need help with my laptop second hand Satellite

    I have a unusual problem; I recently bought a second hand laptop that I knew wasn't working as I thought I could fix it. However, I discovered that all the decals identify which model I have are deleted. I know it's a Toshiba Satellite. The keyboard

  • ac024tx: not updated on driver downloads page

    Hello, my HP support assistant asks me to update two of my audio: Intel and Realtek drivers for newer versions. As it can not save a program to install these driverss, I prefer to download them manually from the following page: http://support.HP.com/

  • Classic BlackBerry takes as much time to open an application. Is this normal?

    Recently, I received my new classic Blackberry (Verizon Wireless). I love my keyboard and how e-mail works. But this phone has these long delays while trying to do something. I set up my account of the Bureau de change. When I open the reminders and