Debugger does not get in the orders

Similar Questions

• PCI-7730 does not move in the order of driving different directions?

  I have a 7330 motion control card that I'm driving a shaft on both (so never 1 d moves). I need to be able to move in both directions, which is fairly easy to do using a change (modified to include the limits and home) example VI (I think it was the example of 1 d linear motion). To effectively run my stepper motor for my application, in step/direction mode, when moving to the direction of stage negative (for me it is the 'Blue' in my dye laser) I need to overshoot and then come back so that the engine always ends with a movement from the red. I tried several solutions to this problem, including:

  1. in a VI copy/paste on the screws under necessary motion in order, but specify a 'number of steps to move' for the second piece

  2. call the same Subvi sequentially (so rather than a long VI a VI with calls to conduct main proposal sub - VI) with various implementations of delays and sequencing

  The problems I encounter are:

  When using a single move VI (then go one direction up to the complete removal), I can almost always move properly, be it positive or negative direction. Occasionally, and especially when you try to go in a different direction than the previous move, the engine is not. I can watch it on my oscilloscope monitoring steps returned by the engine. The stages of start-up, but about 4 pulses in the VI closes with no error reported (and with the release of that word because, it seems that the program thinks that the move is successful). However, when you use the VI that he calls one way and then the other, I can * never * get the second move (the opposite of the direction) to happen. In 20 years, I even put delays between them in a structure of flat sequence without result. However, I can move one direction, and then immediately the same direction successfully with the same code.

  I can't find a 'free channel' or the ability to set regardless of the behavior of management (for example, direction set out to a negative displacement before the negative move, then reset for a positive move before the move is necessary in fact). It is quite possible, Miss me a crucial part in my VI main motion, but then I think that the repeated movements of single direction would fail more frequently.

  Is there a way to define the direction prior to a move? Or has anyone else encountered this problem and found a solution more "elegant"?

  Thank you!

  A. Berke

  Note: in order to generate enough current to power my motor (it has optically entered remote), I added my own resistance to the stage and the wiring of the direction as they head towards the engine.

  I solved this in case someone else has a similar problem. It turns out that he should be careful with the card ID. It can only be called once (so multiple calls to secondary screws using the same ID Board in a "main" program does not work unless the ID is passed to higher level) in a program.

• 6224 does not get to the internet on vlan-111

  Unable to get to the internet, ran tracert, and when it does respond it shows 192.168.98.254 as next hop.  not good.
  

  On switch port 8 is vlan-1  management port   192.168.2.0/24
  

  on switch port 5 is vlan-111  end-users             192.168.111.0/24
  

  on switch port 21 is vlan-98  Mitel voip phones  (not active yet)    192.168.98.0/24
  

  Unable to get to the internet when on a Win2k8R2 server on switch port 5 vlan-111
  

  running-config                                                                 !Current Configuration:!System Description "PowerConnect 6224, 3.3.1.10, VxWorks 6.5"!System Software Version 3.3.1.10!Cut-through mode is configured as disabled!configurevlan databasevlan 98,111vlan routing 98 1vlan routing 111 2exitsnmp-server location ""snmp-server contact ""hostname "TS-1"stackmember 1 1exitip address 192.168.2.1 255.255.255.0ip default-gateway 192.168.2.254ip domain-name xxxxxx.netip name-server 192.168.111.2ip name-server 216.136.95.2ip host fs-bafb01 192.168.111.2ip host ln-bafb 192.168.111.3ip host tl-bafb 192.168.111.4ip routingip route 0.0.0.0 0.0.0.0 192.168.111.1interface vlan 98name "MITEL"routingip address 192.168.98.254 255.255.255.0exitinterface vlan 111name "111-END-USERS"routingip address 192.168.111.254 255.255.255.0exitusername "admin" password fd358f7bed5ecdd318abe6b925e513cc level 15 encryptedvoice vlandhcp l2relay!interface ethernet 1/g1switchport voice detect autodescription 'To_SRX220'switchport access vlan 111exit!interface ethernet 1/g2switchport voice detect autodescription 'To_TS3_Port26'switchport mode generalswitchport general allowed vlan add 98,111 taggedexit!interface ethernet 1/g3switchport voice detect autodescription 'To_MITEL_SYSTEM'switchport access vlan 98switchport forbidden vlan add 111voice vlan 98exit!interface ethernet 1/g4switchport voice detect autodescription 'To_TS2_Port26'switchport mode generalswitchport general allowed vlan add 98,111 taggedexit!interface ethernet 1/g5switchport voice detect autoswitchport access vlan 111exit!interface ethernet 1/g6switchport voice detect autodescription 'To_LN_BAFB_ETH0'switchport access vlan 111exit!interface ethernet 1/g7switchport voice detect autodescription 'To_TL__PortETH0'switchport access vlan 111switchport forbidden vlan add 98exit!interface ethernet 1/g8switchport voice detect autoexit!interface ethernet 1/g9switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g10switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g11switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g12switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g13switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g14switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g15switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g16switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g17switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g18switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 111switchport general allowed vlan add 98 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g19switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 98,111 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g20switchport voice detect autoswitchport mode generalswitchport general pvid 111switchport general allowed vlan add 98,111 taggedswitchport general allowed vlan remove 1exit!interface ethernet 1/g21switchport voice detect autodescription 'To_FS__Port_ETH01_VLAN98'switchport access vlan 98exit!interface ethernet 1/g22no negotiationspeed 10switchport voice detect autodescription 'To_T4_Port10'switchport mode generalswitchport general allowed vlan add 98,111 taggedexit!interface ethernet 1/g23no negotiationspeed 10switchport voice detect autodescription 'To_W7_Port10'switchport mode generalswitchport general allowed vlan add 98,111 taggedexit!interface ethernet 1/g24no negotiationspeed 10switchport voice detect autodescription 'To_W6_Port10'switchport mode generalswitchport general allowed vlan add 98,111 taggedexit!interface ethernet 1/xg1switchport voice detect autoexit!interface ethernet 1/xg2switchport voice detect autoexit!interface ethernet 1/xg3switchport voice detect autoexit!interface ethernet 1/xg4switchport voice detect autoexit!interface port-channel 1switchport voice detect autoexit!interface port-channel 2switchport voice detect autoexit!interface port-channel 3switchport voice detect autoexit!interface port-channel 4switchport voice detect autoexit!interface port-channel 5switchport voice detect autoexit!interface port-channel 6switchport voice detect autoexit!interface port-channel 7switchport voice detect autoexit!interface port-channel 8switchport voice detect autoexit!interface port-channel 9switchport voice detect autoexit!interface port-channel 10switchport voice detect autoexit!interface port-channel 11switchport voice detect autoexit!interface port-channel 12switchport voice detect autoexit!interface port-channel 13switchport voice detect autoexit!interface port-channel 14switchport voice detect autoexit!interface port-channel 15switchport voice detect autoexit!interface port-channel 16switchport voice detect autoexit!interface port-channel 17switchport voice detect autoexit!interface port-channel 18switchport voice detect autoexit!interface port-channel 19switchport voice detect autoexit!interface port-channel 20switchport voice detect autoexit!interface port-channel 21switchport voice detect autoexit!interface port-channel 22switchport voice detect autoexit!interface port-channel 23switchport voice detect autoexit!interface port-channel 24switchport voice detect autoexit!interface port-channel 25switchport voice detect autoexit!interface port-channel 26switchport voice detect autoexit!interface port-channel 27switchport voice detect autoexit!interface port-channel 28switchport voice detect autoexit!interface port-channel 29switchport voice detect autoexit!interface port-channel 30switchport voice detect autoexit!interface port-channel 31switchport voice detect autoexit!interface port-channel 32switchport voice detect autoexit!interface port-channel 33switchport voice detect autoexit!interface port-channel 34switchport voice detect autoexit!interface port-channel 35switchport voice detect autoexit!interface port-channel 36switchport voice detect autoexit!interface port-channel 37switchport voice detect autoexit!interface port-channel 38switchport voice detect autoexit!interface port-channel 39switchport voice detect autoexit!interface port-channel 40switchport voice detect autoexit!interface port-channel 41switchport voice detect autoexit!interface port-channel 42switchport voice detect autoexit!interface port-channel 43switchport voice detect autoexit!interface port-channel 44switchport voice detect autoexit!interface port-channel 45switchport voice detect autoexit!interface port-channel 46switchport voice detect autoexit!interface port-channel 47switchport voice detect autoexit!interface port-channel 48switchport voice detect autoexitsnmp-server community public ro ipaddress 192.168.111.9exit
  

  I didn't imply that you need another switch.  In my example of switch 2 is your firewall.

• Debugger does not move to the breakpoints on the device and Simulator

  Hi all

  my Blackberry 9800 recently got updated to v6.0.0.534.

  I use BlackBerry java plugin in Eclipse.

  The details are the following:

  BLackberry Java Plugin version 1.3.0.201102031007 - 19

  BlackBerry Java SDK's 6.0.0.30

  And the JDE is 6.0.0

  First of all, there are some files missing debugging, I have that and earlier was able to debug properly.

  Now he comes into debug mode, but does not touch the breakpoints.

  Hi all

  I've had this work now, I cleaned up the Simulator and then deleted these files:

  . COD

  .jar

  . Debug

  .jad

  . CAP

  .

• socket InputStream does not get all the data, please help

  I've been doing stuff of network on blackberry for quite awhile, but still using the http connection.

  I have to use the socket for a piece of my application connection, but could not do the work.

  This code is what I do

  String url =

  "socket: / / ' + rmserver + ': ' + rmport;

  Socket SocketConnection = Connector.open (url) (SocketConnection);

  socket.setSocketOption (SocketConnection.KEEPALIVE, 1);

  OutputStream = socket.openOutputStream ();

  InputStream = socket.openInputStream ();

  send something here using outputstream

  int

  If (f > 0) {}

  do somwthing

  }

  AV is always 0.

  I don't know that my server sends data successfully. I run the network packet capture tool etheal on the MDS Server, I can see given reached MDS Server, but they never come to my device app.

  The outputstream works very well, I can send data from my application and my server code gets all of them.

  Where should I check? If it is http, I can turn on the debugging http on MDS log and see all network traffic, but for the socket connection, data packet is not connected (or I missed where it is).

  Is someone can you please tell me where I should go to understand why?

  Please try the suggestion to remove the check mark on InputStream.available.

• Icon by default does not get replaced the device

  I build my app Gap telephone building (cli - 6.3.0), and I can't seem to get my custom icon to replace the default icon (stock cordova icon) appearing on the (android) device, once installed. My config.xml file contains the following entry:

  < src = "icon.png icon" / > "

  In my folder structure, the aforementioned icon.png is in my directory, and the file config.xml and index.html.

  I've read through previous discussions on the topic, as well as the docs of pit of phone, and I can't seem to determine the cause. All resolved issues seem to be related to issues that do not seem to apply to my case (incorrect folder structure, correspondence between the value name and the config directory, etc.).

  I should add that the icon "does" appear on the construction site...

  

  What should I do to my custom icon is displayed on an android device after installation, and not the default icon?

  Thanks in advance!

  What are all these icons in the part "android"? You seem to believe that you must declare all the icons/images that you use in your application. However, you are supposed to specify different densities app icons, only. These are the icons that appear on the home screen of the Android OS.

• How can I download my suite adobe if more than 30 days? (Does not appear in the order history)

  My file of configuration of adobe creative suite 5.5 is on my external hard drive that has failed. How can I download a new configuration file? I have my series.

  Hi [email protected],

  Please go through the mentioned link and download CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html . Please follow the very important instructions before downloading.

  Please let us know if it worked.

  Kind regards

  Romit Sinha

• Synaptics touchpad two fingers scrolling does not work in the player to develop modern UI application Windows 8.1

  I have a HP Envy TouchSmart UltraBook 4-1161er. Two fingers to scroll worked well in all modern user interface applications that come with the pre-installed operating system Windows 8.1, but the situation changed after the upgrade to Windows 8.1. Now this excellent and very useful two fingers scrolling does not work in the updated reader application. How to make it work?

  If the problem is in the drivers, maybe, install the drivers the latest may correct this?

  I tried to find the latest drivers for the touchpad Synptics in my ultrabook on the HP website, but it's the same old v16.5.3.3, I already have (published in may 2013). Synatics official site contains a link to the latest touchpad driver pack v17.0.19. Can I install it?

  I would try to install the Windows 8.1 (64-bit) driver Synaptics touchpad available in the download section of your sleekbook web support before using compatibility mode.  If the current driver does not work for you, try the earlier versions available .

  If you have no positive results, then use the compatibility mode (select Windows 8) on all three Windows 8.1 synaptics touchpad drivers, starting with the most recent.

  To use compatibility mode to install the driver just softpaq to the right, click on the file and choose troubleshoot compatibility. Select Windows 8 and run the installer.

  The following video has a decent explanation, but the Narrator does not get to the point for a bit. Go directly to the minute 4 and watch it from there.

• Debug the device - missing .debug files - debugger does not slaughter

  Hello world

  I'm trying to debug on my bold 9700.

  If I attach the debugger to the jde to my device through debugging--> join to---> Pocket I can see debug messages in the output window of the jde. But the debugger does not stop at breakpoints also I get error messages while the debugger is endearing to the device. Missing files 'net.rim.cldc' etc.

  Searching the Internet has proved I have the specify a location where the debugger can find the ".debug" missing files.

  I hope someone can tell me where to download these files f *. I'm tired of searching...

  Thanks in advance

  Harry

  Hello. Debug files are provided with BlackBerry simulators, so you can install a BlackBerry Simulator that corresponds to your version of BlackBerry device software.

  BlackBerry simulators can be downloaded here: https://www.blackberry.com/Downloads/entry.do?code=060AD92489947D410D897474079C1477

  Best regards, Dmitry.

• Images in the media browser does not appear in chronological order...

  We went just to Adobe Premiere Pro. The images in the media browser does not appear in chronological order. In the media browser window, there is a drop-down list labelled 'name', but nothing else. How can we get the images to display in chronological order?

  Short answer: no

  Its digital or alphabetical.

  Once in the project window, you can sort by date.

• I worked on the Web site of our Church and all of a sudden my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  I worked on the Web site of our Church and all of a sudden this week, my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.

  • [918127/questions/918127]
  • [918028/questions/918028]

• Toolbar Yahoo appeared without my consent. Can't get rid of it. Does not appear in the list of Add-ons or in the list of the programs installed for uninstall. (Win7; (FFx5) Please help me remove this annoyance.)

  I was asked to update Java. I had a YAHOO toolbar I made and do not want to. I can't get rid of it. It does not appear on the list of Add-ons, not in the list of programs (for uninstall). Could not find anything with Yahoo in the name. I don't want to use the view, as he returns to the display without my consent - I want not gone permanently.

  The Yahoo uninstall instructions help call for, click on the pencil tool (which tool is not found on this toolbar). Firefox instructions say go to the list of Add-ons, but the Yahoo bar is not there. There are several modules of Java, but I don't know what they are and what happens if they are uninstalled.

  Win 7; Firefox 5.0. Yahoo toolbar worm 2.3.8.20110620112826

  Maybe he is disguised as something else. If so please tell me what you need to uninstall.

  Open Firefox-> go in the Menu Tools-> Add-ons-> Extension section-> remove any add-on suspicious you-> restart Firefox

  If above solution doesn't work, try the following.

  Open Firefox-> go to Menu view-> toolbars-> UNCHECK any suspicious entry toolbar.

  Check if it works.

• Adding in the tab info get album artwork does not actually add the work.

  I'm on Windows 10 64 - bit with itunes 12.3.2 and whenever I try to add an illustration to the get album info tab, it does not show on the album or in the get info tab when I return. All my music files are .mp3 and tried to add work for each individual piece. I also tried to reinstall itunes and return back to an earlier version of itunes 12, does not. If it helps, I have a laptop with a intel i7 5700-AC (2.7 to 3.5 gHz), Intel HD Graphics 5600 processor and a Nvidia GTX 970 M. I have 16 GB of DDR3 RAM and 128 GB SSD and 1 TB HARD drive.

  See comments under iTunes 12 Album Art not recording.

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• SA520W does not get an IP on the WAN option

  We use a SA520W as our main router and have a fiber attached to the interface default WAN connection. We would like to improve our availability using a secondary internet connection on the WAN interface option.

  We bought a router dovado tiny 4g for this another connection. It acts as a dhcp server, but the Cisco router does not get an IP address from the dovado router. The router works as expected when it is connected to a normal computer. But somehow the cisco router does not get an IP address.

  I also tried to put a static IP address for the Cisco router, but that did not help either. The dovado router is setup deliver ip in the range of 192.168.0.2 - 254

  Link is established, but State wide AREA network is down. Any ideas?

  

  Christian,

  Make sure that the port option is set to WAN and WAN mode = MODE of LOAD BALANCE. If not pull an ip address or to negotiate a connection.

  Jasbryan