Debugger does not move to the breakpoints on the device and Simulator

Similar Questions

• Suddenly, my sound card does not work - try the devices and add/install the old hardware on the Assistant Manager, he finds ADSInstant HTV PC1, but sending the message... Impossible to install correctly the code 10

  tried the Device Manager and add/install the old hardware on the wizard... he finds ADSInstant HTV PC1, but sending the message... Impossible to install correctly the code 10

  Restore the system to then it was working properly.

• My ink carriage does not move to the way to replace the ink cartridges. I think I put the ink in the wrong office

  My ink carriage does not move to the way to replace the ink cartridges. I think I put ink in bad officejet 3830

  Hello! Welcome to the community @Tammy111 HP

  I read your post about the ink carriage being stuck in your Officejet 3830, and I wanted to respond to troubleshoot. Try these steps and if the transport is not yet move to order so that you can access the ink, then your best bet would be to call phone support to see if they can replace the unit for you. I'll leave their details below.

  HP OfficeJet 3830, DeskJet 3830, 5730 printers - an error 'Transport Jam'

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear

• Case Structure sequence does not move to the next iteration

  Hello

  I am trying to create a multifunction data acquisition and control of a laboratory instrument. As shown in the attached VI, I finally 3 different modes: simple, door double door and GC, each with their own functionality. So far, I worked only on the Mode of the door, so that the rest are empty. However, trying to make the system to wait for the interactions of the user, if the key 'only start door mode', it moves in this case without problem, and if there is no hurry, he waits, bike to the tab control like I want it. However, after execution of the VI with the pressed button, it will not return to the 'Wait' case, he freezes in "aquire" and refuses to return to the case "wait." I'm sorry if this is confusing, I think it will be clear when running highlight is used, it freezes just after the correct number of iterations in the loop for. thank you for your help,.

  <><>

  Normal 0 false false false fr X-NONE X-NONE / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  Hi Eric,.

  I think the sequence works as you want.  When I run it on my computer on my computer he is turned down for the case of waiting as you want.  I don't have to open the VI called single door Pulser.vi and manually, click on the button to stop inside the VI but after doing that it moves to the cae of waiting.  Also, I noticed that you have a constant wired up to the judgment of the outside loop while. This isn't really a good idea because it forces you to use the button abandon.  The button abandon does not stop correctly the VI and could cause other problems.  I suggest you to have a stop button on the front panel somewhere to allow the judgment of the user of VI.

• Player media to Smartphones blackBerry does not move to the next song

  I have a few playlists and when I listen to when a song ends he goes to the next song without me clicking next.  The "Auto stop media player when idle" is set to off.  The other thing is the counter which indicates how long the songs are and counties up and down does not move as the song is played.  Verizon did not know and only they me transferred to support RIMM.  She gave me some BS get me the phone is off and I'm in the same place I was supposed to start.  Playlists have been imported into Itunes device using Desktop Manager.  Any suggestion would be appreciated.

  This happened to me the other day... don't know why.

  I did a battery pull and it seemed to fix.

• loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

  loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Apple dvd player will not eject a disc, does not show in the devices

  I'm on El Capitan, the player has played other discs, this disc does not appear

  There is no manual of the dvd drive eject

  drive does not appear in the devices

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  How the disk by force ejecting

  Mac Mini

  How to eject a defective DVD?

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• computer (Vista) tells me there is a problem with a scanner, I have not, say to uninstall, but it does not appear on the Device Manager

  tried to install camara, but when it says click on your product, but the camara is not on the list, only scan appears on the list, but I don't have a scanner. tried to uninstall, but does not appear on the Device Manager. try to download programs, and they do not arise in Start menu, just uninstall it list? Thank you

  Hello

  I suggest to uninstall unwanted software from your computer and then try to install the camera. Visit the link below to find the steps on how to uninstall programs "programs and features".

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  After you have installed the camera, please check in the folder C:/Program files if it shows there.

  It may be useful

• My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers.

  My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers, most of the time.  Every now and then it will be visible and I can use it but 90% of the time it does not exist.  I tried the regedit fix, nothing.  I tried the program Microsoft Fix It, it tells me it cannot locate a DVD/ROM.  I removed, cleaned and reinserted my DVD/ROM drive, but no difference.  I tried everything, except the upgrade to Windows 7... who will be my last resort.

  Hello gargoyle28m,

  If your hardware is not detected to upgrade to Windows 7 is not a resolution. This issue may be caused if the DVD drive is faulty or connections loose on the mother board. You may need to check the connections. I suggest you check if the DVD drive works on another computer. You can contact the manufacturer of your computer to help you with this problem.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• PCI-7730 does not move in the order of driving different directions?

  I have a 7330 motion control card that I'm driving a shaft on both (so never 1 d moves). I need to be able to move in both directions, which is fairly easy to do using a change (modified to include the limits and home) example VI (I think it was the example of 1 d linear motion). To effectively run my stepper motor for my application, in step/direction mode, when moving to the direction of stage negative (for me it is the 'Blue' in my dye laser) I need to overshoot and then come back so that the engine always ends with a movement from the red. I tried several solutions to this problem, including:

  1. in a VI copy/paste on the screws under necessary motion in order, but specify a 'number of steps to move' for the second piece

  2. call the same Subvi sequentially (so rather than a long VI a VI with calls to conduct main proposal sub - VI) with various implementations of delays and sequencing

  The problems I encounter are:

  When using a single move VI (then go one direction up to the complete removal), I can almost always move properly, be it positive or negative direction. Occasionally, and especially when you try to go in a different direction than the previous move, the engine is not. I can watch it on my oscilloscope monitoring steps returned by the engine. The stages of start-up, but about 4 pulses in the VI closes with no error reported (and with the release of that word because, it seems that the program thinks that the move is successful). However, when you use the VI that he calls one way and then the other, I can * never * get the second move (the opposite of the direction) to happen. In 20 years, I even put delays between them in a structure of flat sequence without result. However, I can move one direction, and then immediately the same direction successfully with the same code.

  I can't find a 'free channel' or the ability to set regardless of the behavior of management (for example, direction set out to a negative displacement before the negative move, then reset for a positive move before the move is necessary in fact). It is quite possible, Miss me a crucial part in my VI main motion, but then I think that the repeated movements of single direction would fail more frequently.

  Is there a way to define the direction prior to a move? Or has anyone else encountered this problem and found a solution more "elegant"?

  Thank you!

  A. Berke

  Note: in order to generate enough current to power my motor (it has optically entered remote), I added my own resistance to the stage and the wiring of the direction as they head towards the engine.

  I solved this in case someone else has a similar problem. It turns out that he should be careful with the card ID. It can only be called once (so multiple calls to secondary screws using the same ID Board in a "main" program does not work unless the ID is passed to higher level) in a program.

• NULL does not move with the tracking data

  I created a track in Mocha AE and copied to the Clipboard.
  Then, I created a Null value in AE and pasted the follow-up data on it.

  However, Null value does not move.
  Any ideas?

  PS I have watch it during the follow-up process, and grooving of X, I created did move/track.

  you have a composition of 54 Minutes here. you are going to restore all 54 minutes with the 54 minutes of elements trained using data from mocha in sequels? I guess that the answer is no. first thing you have to do is on the duration of the shot you want to make your composition. so only you take to mocha and follow your footage.

  so in your example, I guess you should take about 30 seconds, or maybe more? Set the workspace accordingly:

  

  then cut the timespan to duration:

  

  then you should have this:

  

  Ahhh MUCH better. only the length you need. now use the rail in Mocha Ae option. in case of mocha, you will again see the duration of your huge video file:

  

  to keep things organized you can zoom timeline in the / points so that you can see just the graven images and will not get confused by 53.5 minutes of video you don't need. Press here:

  

  now, you will see this - just your images carved

  

  track data, export and when you paste data - make sure that you are on the first image.

  

  Good luck!

• Content does not move with the work plan

  Kind of a matter of newbie, but for some reason any when I try to rearrange work plans most of the content does not move with it.

  How can I change the content to associate with a specific work plan?

  Oh, layers shouldn't matter, unless they are maybe locked.

  Make sure you click on the "Move art with work plan" option when the artboard tool is selected.

  

• pointer does not move in the games full screen

  My pointer do not move in the games when they are full screen on windows 7. In windowed mode, it works but it do not fit with all the games because I can't scroll.

  I've updated all my drivers...

  It's a well known problem with Windows Vista, but it had an impact on many users... seemed random.  Microsoft produced a patch for Vista.

  http://support.Microsoft.com/default.aspx/KB/932653/en-us

  Windows 7 can get a similar fix in time.  In the meantime, it is possible to download the Vista fix & install it via a right click on the Setup file, clicking on properties, then the Compatibility tab and it runs as an application in Vista.

  Nu WinBreak.com - video game Fanblogging

• I have an index page that does not correctly load the css and css works on all other pages of the site.

  http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
  http://www.boulderridgecondos.com/news.htm

  I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

  Any help or suggestion looking for something would be appreciated.

  This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.