declaring status give invalid refnum

Similar Questions

• Reactivation of COSTS gives invalid message, refuse the activation

  Two years ago a co. local computer (now out of business) installed a new motherboard on my Emachine and reinstalled XP Home edition but said my original restore disks would be good, but it gave back to me in any case. Does not understand why at the time.  Recently my hard drive crashed and I replaced with HD upgrade with serial connection.  I could recover my os XP and drivers of the original code and sata product restore disks and reinstalled.  The operating system works very well, but get COA invalid trying to validation and said: I have just 30 days to correct.  What can I do? The wizard gives reactivation phone. for assistance, which is only recorded message, can't reach a live technician to explain the problem. It's my oper. system that came preloaded with my pc at the time of purchase.

  The PC manufacturer can determine what they consider a new PC to be.

  If an exact replacement motherboard has been installed in your Emachine PC, it would be one thing. However, if a different motherboard has been installed, this could be considered a new PC. And if that is the case, your OEM license original (which does not allow the transfer to "another PC") and associates of product key no longer works. Another factor is often install XP OEM brand CD works only with the original motherboard because they are looking for a specific code on the CMOS. Dell computers are like that, but I have no experience with Emachines computers.

  What are the options you get when you dial the phone number?

  When you bought the new motherboard, you probably should have also bought a new XP installation CD. Had you done so, that of the CD (as well as its associated product key) is what you would use.

• Replication suddenly failing: status "inactive", "invalid state" error

  I've been replication between sites for a while.  Today, all but 1 on the States of VM replication has changed to 'Inactive'... then, of course, to the "not active (Violation of RPO).  When I try to force synchronization to occur now, web client gives me an error that synchronization is already in progress.  in vCenter, he reports that "VM is in an invalid state.

  I can't find anything about it anywhere.  have you seen this before?  I don't know what next steps I can take here;

  Hello

  In order to study we support beams. Could you file an SR and fix the support beams? Most likely, it is a connectivity problem between the host and the site of the replica.

  Thank you

  Lachezar

• I find the EBS system much WF_DEFERRED reference object status is invalid, pl

  STATUS OF OWNER OBJECT_TYPE OBJECT_NAME
  
  APPLSYS WF_DEFERRED_QUEUE_M_N RULE THE INVALID VALUE
  APPLSYS WF_DEFERRED_N RULE THE INVALID VALUE
  APPLSYS WF_NOTIFICATION_OUT_N RULE THE INVALID VALUE
  APPLSYS WF_JAVA_DEFERRED_N RULE THE INVALID VALUE
  APPLSYS FND_CP_GSM_OPP_AQ_N RULE THE INVALID VALUE
  
  
  
  Thank you
  Jackie

  Pls always mention your version of the OS/db/apps.

  With these sets of rules as being invalid seems to be normal.

  I'm not sure of how to compile sets of rules, but you can try to compile all the objects using utlrp.sql and see if that helps.

  Thank you
  JD

• TO_NUMBER gives invalid number

  Hello
  I'm trying to compare varchar2 (250) field with numeric field and it gives me the error invalid number when I run this query.
  There are some alphanumeric values in field varchar2 which I imagine causing problem. Not sure how to check if a field value is numeric or Alpha numric.
  So I need TO_NUMBER only if the t.interface_header_attribute1 value is NUMERIC. I don't know how to do this.
  
  SELECT T.trx_number TransactionRef,
  ca_ship.Account_Number ship_to_CUSTOMER_AC,
  Decode(TP.type,'INV','0','CM','1') TransactionType,
  OE.order_number,
  t.trx_date,
  P.AMOUNT_DUE_ORIGINAL,
  OE.cust_po_number
  OF ra_customer_trx_all t.
  ra_cust_trx_types_all tp,
  OE OE_ORDER_HEADERS_ALL,
  hz_cust_site_uses_all su_ship,
  hz_cust_acct_sites_all sa_ship,
  hz_cust_accounts ca_ship,
  AR_PAYMENT_SCHEDULES_ALl p
  WHERE t.status_trx = "OP" - close
  and t.cust_trx_type_id = tp.cust_trx_type_id
  
  and to_number (nvl (trim (t.interface_header_attribute1),'0 ')) = oe.order_number - to_number causing an error invalid number
  
  and p.TRX_NUMBER = t.trx_number
  -ship to a/c
  and su_ship.site_use_id (+) = t.ship_to_site_use_id
  AND su_ship.cust_acct_site_id = sa_ship.cust_acct_site_id (+)
  AND sa_ship.cust_account_id = ca_ship.cust_account_id (+);
  
  Any help will be much appreciated.
  
  Thank you
  
  VJ

  Hello

  and     regexp_like(t.interface_header_attribute1, '^[0-9]+') -- excludes rows where non digits occur in this column
  

  Not quite true.

  with data as(
  select '123' x from dual union all
  select 'a234f' x from dual union all
  select 'a234' x from dual union all
  select '12d34' x from dual union all
  select '123df5' x from dual)
  
  select
  *
  from data
  where
  regexp_like(x, '^[0-9]+')
  

  Kind regards
  Bobin

• That means "invalid refnum in this context" mean andwhat are the basic rules for which a queue reference is valid or not?

  This Question is displayed to help us learn more about LV

  Point "B" in this image shows a probe with this message.

  

  What it means?

  How can I make valid?

  What I hope, is that someone will check with the ivory tower and we give a nice definition and shed some light on the topic 'context' and how it relates to references of queues.

  Ben

  PS Source (BT 8.5) of the above are of Dr D tale of two servers Nugget here.

  
  

• I bought an Acer computer with a real edition of MS XP Prof. FOT years is has been updated and recognized as true .__Now I receive over a status less "invalid / illegal. ? How is it possible

  I bought an Acer computer with a real teacher MS XP edition. Years is has been updated and recognized as authentic. Now I receive a message that is invalid or illegal. How can I solve?
  Kind regards
  T. Hooij

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Pivot gives invalid identifier query

  I am trying to create my first pivot query. I have two tables:

  CREATE TABLE "SKIP"."ORDERS"    
  (
    "CATG" VARCHAR2(30),
     "PART_NR" VARCHAR2(30),
     "PART_REV" VARCHAR2(30),
     "CUST_ID" NUMBER,
     "ORDER_DT" DATE )
  ;
  
  
  CREATE TABLE "SKIP"."CUSTOMERS"    
  (
    "STATE" VARCHAR2(30),
     "CUST_ID" NUMBER    )
  ;
  
  

  I want to create a PivotTable with years above and some of the numbers on the side. I had a problem from the beginning when I tried it. It seems that you can't use a function on the clause, which forbids me to use

  PIVOT (COUNT (PART_NR) to extract (year of the ORDERS.) ORDER_DT))

  I don't remember the exact error, he gave me, but I found a "possible solution" with the query nested that I have below

  SELECT * FROM
  (SELECT PART_NR, YR FROM (
    (SELECT ORDERS.CATG || '-' || ORDERS.PART_NR || ORDERS.PART_REV AS PART_NR, extract (year from ORDERS.ORDER_DT) AS "YR"
    FROM ORDERS, CUSTOMERS
    where
    CUSTOMERS.STATE = "VA"
    and 
    ORDERS.CUST_ID = CUSTOMERS.CUST_ID
    )
  )
  PIVOT (COUNT(PART_NR) FOR YR IN (
    2002,
    2003,
    2004,
    2005,
    2006,
    2007,
    2008,
    2009,
    2010,
    2011,
    2012,
    2013
    )
  )
  )
  ORDER BY PART_NR
  

  But now, I get an error: 'Year': invalid identifier

  I tested the two nested queries (beginning with SELECT PART_NR, YR OF) and who did indeed get the two columns PART_NR and year, so the problem must be in the PIVOT.

  Any ideas?

  Hello

  You probably mean COUNT (*) instead of COUNT (part_nr) and use SELECT * in the subquery, which is the PIVOT.

  There is a column called GOING? If this isn't the case, you probably want to single quotes, not double - quote, in line 6.

  2 external queries can be combined; You can make an ORDER BY in the query even as PIVOT.

  If I had copies of sample size of your tables, and the results you wanted Sinc sample data, then I could test and show you exactly.

  Whenever you have a problem, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements) of all the tables involved, so that people who want to help you can recreate the problem and test their ideas.

  Also post the results you want from this data, as well as an explanation of how you get these results from these data, with specific examples.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• Invalid line in functional reference Global

  I must forget something very basic about queue references. Here's my problem... I have a LabVIEW application that generates dynamically from the Q (a queue is generated in order to act as a stream dedicated to each chart created). Queue references are created and stored by a functional overall (FG - Manager.vi queue). This functional global is called the "Launcher" and the "Monitor". Everything works fine until the pitcher is closed how the queue references show "invalid Refnum". The reference is always in memory because the functional overall is still called by the monitor memory then why are my Q turning references invalid? See example attached LV2010sp1.

  See Rolf's response in this thread

• LEFTOUTER join querry which gives bad result

  Hello

  I have tables like below.when I perform a left outer join issue IDs and startdate he gives invalid results.when I write in request

  It does not correct result because there is no data for 16 jan. It should give no results. But it shows all records. How do I solve this problem

  SQL:

  Select a.id, a.date, b.val, a.tot, b.net, b.cre

  FROM table1 a

  join table2 b left

  "on a.id = b.id and a.date = b. and a.date ='02-Feb-2014."

  In the tables below contains no data for the month of February but still im getting the incorrect data. He must not returnany files right?

  Table1:

  ID	Date	Val	tot
  1	January 1, 13	1	9
  2	2 January 13	3	8
  3	3 January 13	4	7
  4	January 4, 13	5	6
  5	5 January 13	6	5

  Table2:

  ID	Date	NET	CRE
  1	January 1, 13	1	9
  2	13 January 13	3	8
  3	3 January 13	4	7
  4	January 4, 13	5	6
  5	5 January 13	6	5

  "It should not returnany files right?

  Wrong, there is no where clause so it should return all the records in a padded with NULL values for b.

• ORA-12514 and UNKNOWN status

  Hello

  cannot connect to DB on 10.2.0.3 on Win by:

  sqlplus user/password@MYDB

  ORA-12514: TNS:listener is not currently of service requested in connect

  Descriptor.

  lsnrctl status gives:

  Service 'MyDB.server.LOCAL' has 1 instance (s).

  Instance 'MYDB', status UNKNOWN, has 1 operation for this service...

  But tnsping MYDB is OK.

  I can communicate with:

  Set ORACLE_SID = MYDB

  sqlplus / as sysdba

  Any idea?

  Thank you.

  Thank you all.

  I registered the database. And seems nice work.

  Kind regards.

• Checkboxes in a declarative component

  Hi all
  
  JDeveloper 11.1.1.5.0
  
  I created a component declarative which shows a list of checkboxes in the layout that is needed for our application.
  For this component declarative, I give 2 key attributes: 1 iterator with the complete list of opportunities (like all countries) and 1 iterator with the list of countries selected in the given folder.
  I am able to correctly display the boxes and call the necessary methods in checking and unchecking the boxes,
  but I'm not able to select default, checkboxes that are present in the iterator with the selected countries.
  I have the code to do it, but so far I still needed to press a button to get the code running.
  
  Is there a way to automatically launch a code when the declarative component is illustrated?
  
  I tried the selected property, but I don't know for what component, I do the test and it also gives a strange behavior in the sense that all of the checkboxes become unalterable.
  Note that a declarative component is a page definition file, so I can't use the standard executable section to launch my code.
  
  Thanks for your comments.
  
  Filip Huysmans.
  PS: If you want to that application with the code, just drop your email address.
  
  Published by: Filip Huysmans on December 11, 2011 23:52

  Filip,

  I found a way to trigger the selection:

  1 set the value property of the af: selectBooleanCheckbox to a managed bean that extends from HashMap - to be able to add a parameter: the Id check a State selected or deselected.
  For the parameters in the EL expressions, see also: http://technology.amis.nl/blog/2333/jsf-el-calculator-bean-to-overcome-coercion-errors-and-add-functionality-to-el-expressions

  In this way, the value property can call a * "isSelected (Number, number) * ' method on a managed bean that can include the Id to check:

  + / public class MultiCheckBoxSelectMB extends HashMap {+
  private static final long serialVersionUID = 1 L;

  + public Object get (Object key) {+
  + If (key instanceof String) {+
  Command string = (String) key;
  + If ("selected".equalsIgnoreCase (command)) {+
  Back to this;
  +}+
  +}+
  + If (key instanceof oracle.jbo.domain.Number) {+
  oracle.jbo.domain.Number id = (oracle.jbo.domain.Number) key;
  System.out.println ("-get() Id:" +)
  (ID);
  + return isSelected (id); } else +.
  Returns false;
  +}+

  + private isSelected (dbId Number) boolean {+
  + / / determine if the Id is part of a certain iterator or not. +
  +}+

  2. set the value of the af: selectBooleanCheckbox to * #{MultiCheckBoxSelectMB.selected [list.id]} *.

  
  autoSubmit = "true" >

  It works in your sample application, the button and the corresponding action method is no longer giving the boxes a value from the database.

  Frank Houweling

  Published by: Frank Houweling on 12-dec-2011 05:49

• greeting cards does not - invalid size

  With the help of windows 7 - greeting cards does not work.  gives invalid messages size

  Thanks - someone helped me! It's working now

  Sent from my BlackBerry from Vodacom - let your email find you!

• Newspaper to repeat INVALID after the creation of a new group member

  Hi all
  
  I just followed the instructions to create a new redo log file member:
  
  alter database add logfile Member ' / oracle/mplex/redo/redo01b.log' group 1;
  
  When I query v$ logfile, the status is INVALID if.
  
  SQL > select * from v$ logfile where Group # = 1;
  
  GROUP # STATUS TYPE
  ---------- ------- -------
  MEMBERS
  --------------------------------------------------------------------------------
  IS_
  ---
  1 ONLINE
  /U01/app/Oracle/oradata/redo01.log
  NO.
  
  1 INVALID ONLINE
  /Oracle/MPlex/redo/redo01b.log
  NO.
  
  the oracle user has the mplex directory and authorization are fine
  
  [oracle@redo]$ ls - ltr
  Total 51260
  -rw - r - 1 oracle oinstall 52429312 11 Mar 11:55 redo01b.log
  
  Any ideas?
  
  Thank you

  Redo Log files have DISABILITY status, this is completely normal behavior.

  INVALID state is cleared when these of Redo Log files will be reset, which means that when the newspaper writer will write to them for the first time.

• Change the status of redolog

  Dear all
  
  I have this output
  
  GROUP # STATUS TYPE MEMBER IS_RECOVERY_DEST_FILE
  
  1 E:\orcl_FILES\orcl\REDO21 online. JOURNAL NO.
  1 E:\orcl_FILES\orcl\REDO11 online. JOURNAL NO.
  1 E:\orcl_FILES\orcl\REDO31 online. JOURNAL NO.
  2 F:\orcl_FILES\orcl\REDO12 online. JOURNAL NO.
  2 F:\orcl_FILES\orcl\REDO22 online. JOURNAL NO.
  2 F:\orcl_FILES\orcl\REDO32 online. JOURNAL NO.
  3 Q:\orcl_FILES\orcl\REDO23 online. JOURNAL NO.
  3 Q:\orcl_FILES\orcl\REDO13 online. JOURNAL NO.
  3 Q:\orcl_FILES\orcl\REDO33 online. JOURNAL NO.
  
  
  GROUP # STATUS OF ARCHIVED MEMBERS
  
  1 3 UNUSED YES
  2 3 CURRENT NO.
  3 3 UNUSED YES
  
  
  When do the select two
  SELECT GROUP #, MEMBER, STATUS, ARCHIVED FROM V$ LOG;
  
  
  Select * from v$ logfile;
  
  Why the State values is null in the first select statement.
  
  in the second, select how can I update the status of Group 1 of redo log to the current value, and I need to stop the database status update.
  
  Thanks in advance

  You have not listed outputs and queries in the same order.

  The first release listed is for the second query listed? Is this fair?

  V$ LOGFILE lists the files - that is to say the members of each group of Redo Log. A NULL state means that it is good! (Other statuses are "INVALIDS", "FADE", "DELETED", which are not so good).

  V$ LOG lists of Redo Log groups. "UNUSED" status means that it is a new group and LGWR (newspaper writer) has not yet started writing to her. This is the status becomes 'CURRENT' startup LGWR writes for her. (Once LGWR ends in writing for her, the status changes to 'ACTIVE' until the log switch checkpoint is completed and the archiver has completed all a member of the Group of Redo Log archiving).

  You have not ' do anythiing ' to change the status of the Redo Log groups. State changes when LGWR writing begins and ends in writing. You can, if you wish, make see command 'ALTER SYSTEM SWITCH LOGFILE' change in status that LGWR switches from one file to another group from one to the other.

  A group of Redo Log can consist of 1 or more members. 2 members would mean that they are 'mirrors' of each other - for redundancy (in case of failure of one when he became "INVALID").

  Please read the manual of Concepts and Reference Manual documentation.
  Go to http://tahiti.oracle.com or on the tab "documentation" to http://otn.oracle.com for documentation.

  Hemant K Collette

  Published by: Hemant K grapple on January 12, 2011 22:39