Decoration of the digital indicator?

Similar Questions

• view table 1 d in the digital indicator

  I would like to display the first item in the digital display and the next show in the second place, the second component of the digital indicator and so on.

  How to get around doing tat?

  Try this:

  

• How to upgrade the digital indicator with digital input

  Hello guys,.

  I'm trying to write code to do the following:

  The P0.0 USB-6501 connected to a switch which is held at the top via a resistor.

  The switch is pressed and I can detect the entry (my LED panel changes color).

  I need to update a digital indicator (I think it's the correct vi I use) whenever you press the switch.

  Any assistant will be much appreciated.

  
  

• Size of analog input to see the digital indicator cover

  I read a channel of analog input with several samples, and I want the magnitude of which is playing to display on a digital indicator which is on my front.  I know that it is not possible to wire just the data directly to a digital display of the signal due to the difference in the data type.  Does anyone have an ideal on how I can get around that?

  Dear Thuillot

  You can use 'Extract only your Information' function found in the range of signal processing.

  You can find more information on this feature here

  Kind regards.

• When I receive an SMS, the digital indicator does not appear on the text message icon. Why?

  Once I receive an SMS, it should be a digital display on the icon of the SMS application that displays the number of messages unread I received. This is not the case. So I am unable to see that I have received a message, I don't have the text application open. No idea why this is?

  Check the settings-> Notifications and see if the badge icon is enabled for this app.

• display the exact value of a slide to the digital indicator whenever it is changed

  the subject says it all

  Right-click to digital exhibition

  Ben

• Possibility to write a program for a digital indicator labels

  I see that there is a property node for the digital indicator that you can manipulate the tag with it.  After trying to use this feature, I get an error saying that you can change this functionality during edit mode.  My question is if there is property node to change the text why you can't it programmatically change?

  You must show the legend for the control and hide the label.  You can change the captions at run time.

• Digital indicator display

  I use the digital indicator for my Countdown to 0 (zero). The thing is I don't like when the number of numbers to 0, and then view - 0. Someone knows how to set the display to 0 instead of - 0.

  Thank you

  The only reason is could may show zero is if it's displaying a negative number slightly less than zero and is getting round.  What is the representation of your screen?  Is this double or is it all over?  Maybe if you have validated your VI, we see what is happening and provide better suggestions.

• Digital indicator rounded to the nearest whole number

  I have a digital indicator for a 2D double table, and when I play with the display Format in the properties of the indicator, I can adjust to show the 3 digits of precision. However on the indicator, I find myself just get something like 1548.000. However, it did not make sense to me that this number would not have some amount of non zero decimal places, and when I probe the wire table 2d, enter the flag during the race, I can see that the number should actually be something like 1548.315... Is there a rounding adjustment when I checked that I can't find? (The indicator is set to U16) Any help would be greatly appreciated.

  Colin

  Of course I answered my own question as soon as I post. I realized that I wrote that the indicator is U16 that that was my problem, change to the dual representation to be fixed. Sorry for this pointless topic.

• in the cell indicator digital table according to the color value

  Is it possible to change the color of text in individual cells of a digital display indicator depends on the value of the digital displayed in this cell.

  You can use the ListBox instead of indicators in table. You can change the ownership of each cell individually.

• You can use the value of a digital indicator in a digital control?

  Hello!

  I have to develop a code where I need to find the maximum value of a waveform and draw a line at 50% of the value. So I chose find the amplitude of say 10 cycles of waveforms and found the maximum value of the amplitude.

  But my real problem is, I have to use the maximum amplitude value I get from the table VI maximum and back into a program to calculate the value of 50%.

  So it is possible to use the value of a digital indicator and put it in a digital control? As in MATLAB or C, you give a name to the variable and use it later to do all the calculations. Is it possible to do something similar in LabVIEW?

  
  

• When the value to display in the time format double digital indicator... Changes in value.

  Hi all

  I can't display the values that I want. I have a value double say 320 sent to a digital indicator where I edited the properties of it to display in a time format that contains only minutes and seconds as Yes, 3:20 '. Unfortunately, it takes the value and change it to another value and display that. I don't know what is the issue. If anyone knows the solution... Please post!

  There is an image attatched!

  Thank you.

  I believe only then due to the fact that when I convert a timestamp value to double as 03:20, he gave me 320. So I thought that the reverse can be trying. Should I just enter the total amount of seconds and that will show the Minuteseconds I want?

  Thanks for the quick response.

• Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel?

  Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel? Examples or suggestions would be greatly appreciated.

  Thank you

  Tunis

  Thank you Adam, it's originally in a while loop, I placed it in a loop for example, wired County in the for loop and presto, this son of a digital indicator. It works very well. Thanks for the help folks.

• Input data for digital indicator tab does not exist

  Hello

  I'm trying to define the range of data for the numerical indicators on LabVIEW 10.0.1. For some reason when I go into the properties of my digital indicator, there is no input data tab as explained on the Web site of NOR: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/changing_data_ranges_of_nu/. In addition, in the tab data type, there is a section for the range, but everything is gray. Any help is appreciated. Thank you

  Dig up a very, very old manual (1996!) isn't all that productive. If you want to restrict the output, just use the function in the range and force.

• digital digital indicator of coercion dot

  Using the evaluation version of LabVIEW 2013 64-bit.

  I have a digital U32 digital indicator on the front panel.

  I'm passing a reference of it to a Subvi. The Subvi has a control that is the server VI-> generic class-> GObject-> control-> digital-> digital

  On the main VI, there is a point of constraint.

  Don't know what LabVIEW dislikes and what should I do to remove the point of constraint.

  OK, I see what you're saying now.  You get a coercion of the reference, not pulled from property of value inside the Subvi.

  This seems to be a difference between a strict typed and a normal digital command reference.  You can reference a strict type of entry by a right click on it and select this option to display the control.  Then, drag a control inside (preferably a just like you trying to control).  But this will make the specific digital control U32 VI.  Not always desirable.  As you have now, I think it changing just the reference.  I personally don't worry about this.