default 1102w printer

Similar Questions

• How can I change default Firexox printer to my system default printer?

  When the print dialog... back to Firefox, it shows that it will print to PaperPort. My default system printer is a Lexmark network printer. I checked my computer devices and printers, and the Lexmark is checked by default. Firefox is the only application that prints in PaperPort by default and that since a recent update for Firefox 29.0.1. I would like the Lexmark to the printer by default in Firefox, as it is for all my other apps. It's annoying to have to manually select the correct printer each time I want to print.

  Hello davecahn, try to Reset Firefox printer setting, close firefox, restart it and check again. If doesn't work then, reset all printer of Firefox settings and check again.

  Thank you

• HP Laserjet Pro 1102w: printer recorded more than once how can I remove the extra

  An attempt to get this printer to print, I registered several times in the same printer. I want to dele dupes. How?

  Hi @rosehumm,

  Thanks for posting in the Forum from HP Support.

  I see that you are looking to remove duplicates of your HP Laserjet Pro Google Cloud Print 1102w printer.  I would like to help.

  I tested this point in my office and found that the removal of the printer is easy to use.  Here's how:

  • Sign in to your account to Google's Cloud.
  • One at a time, click the name of your printer and click on remove, as shown in the screenshot below:

  

  I would like to know if it works for you.  Thanks again for your post and have a great day!

• HP 1102w printer

  A new router and cannot connect HP 1102w printer to my laptop Mac OS X Mavericks. Can you connect USB, but it is impossible to get a wireless network to connect to the printer after hours of searching forums and trying different approaches. Any suggestions?

  Hi KenBayVilla

  I understand you are trying to set up the printer on the new router with Maverick.

  There are two different ways to set up the printer.

  I would like to reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.
  http://support.HP.com/us-en/document/c02486112

  Print a configuration report and check the ssid address and ip are disabled. (hold down the x key and when the printer makes a noise to let go of taken)

  Method: Connect the printer to a wireless network using Wi - Fi Protected Setup connection. (WPS)
  Follow these steps to install the printer using a compatible router WPS.
  http://support.HP.com/us-en/document/c02847467

  Second method:
  Configure the printer on another computer to get a valid ip address for the printer. Then on the Mac, go to the Apple, preferences system, printing and scanning, click on + and then highlight the printer, where it says use: airprint must be selected, add the printer in.

  If you need more simply make assistance let me know.

  I would sign up for updates from the HP driver. When available, you will be informed by e-mail.
  https://h41183.www4.HP.com/signup_alerts.php?country=us&language=en&JumpID=hpalerts_main

• I removed the Windows 7 default fax "printer". How can I reinstall it?

  I removed the default printer for Windows 7 Fax from my device list.  How can I reinstall it so I can fax directly from a Word document.

  There is no win by default fax printer, any such driver is provided by your all in one printer or your fax modem enabled

• Using the reader's default PDF printer?

  Our systems have installed Adobe Reader XI. Is it possible to have Adobe PDF as the printer by default/option printer, or which is available for Acrobat Pro?

  Hi uwaku,

  I'm sorry, but the Adobe PDF printer is only available with the Acrobat version, not with the free Adobe Reader software.

  Kind regards

  Nicos

• Photosmart 7520: Preference avancΘs, change the default settings, print using ONLY black ink (not color ink)

  Where can I find this that all information in the preferences > advanced, what they mean, how and why.

  How to permanentely to change the default printer settings.

  How to use out of the black cartridge for everything I print (I do not want to use ANY) color ink.

  Hi TJBar,

  This link should give you the information you need to explain the menu print, print menus. In order to print in black only, you can select "print in black and white." Note, however, that color will be used during maintenance of your printer. This is necessary to prevent the healthy color ink for when you do not need to use it.

  Please let me know if it helps.

  Thank you very much

  Michaele

• Wireless, HP 1102W printer won't stop printing

  When I send a print job to the printer wireless 1102W requesting a copy, it prints continuous copies until the printer is out of paper. Help! I'm running out of paper and toner...

  It happens to my two computers: one using Windows XP and the other using Windows 7.

  Thank you.

  This can often happen depending on how network installation has been made.  Usually, there should not be problems if you used the Install Smart or connected by the network installation CD.  Can run into problems with a Standard TCP/IP port configuration if the driver has been added another way.

  Administer a test.  Basically, disable the 'bidirectional support' setting in the driver.  Here is a link to a doc:

  http://support.HP.com/us-en/document/c02205132

• MacBook Pro: set double-sided printing by default for printing HP 8600 over Word

  Can I set duplex printing default for Word on my MacBook Pro documents. ? I undertand how to set type for a docukment of words individual, but want to set as the default value for all the word - and all the documents. I can do this on my PC.

  Hello

  You can set as default on Mac as well, however that works very different from Windows.

  First define the printing parameters for printing Double sided, then click the Presets menu and select 'Save the current settings as a preset' advance, completing the print job.

  By default, a used preset will remain until another preset will be used.

  Shlomi

• 5580 HP is by default to print CD every time - when I want to print a page

  Greetings,

  I have a 5580 HP that worked fine until I changed systems (Dell 8250 to 8300), now whenever I try to print a page I need to go to properties and change the "print on a CD" print on page.

  In other words, he has somehow to print CD default print mode.

  I am connected via the USB port, which is important.

  Any ideas on how to change the default settings?

  Help would be very appreciated

  So, I thought about it.

  Go to "Hp Solution Center".  Click on "settings".  Click on "printer settings".

  What that you choose here automatically becomes the default.

  NOTE: when I changed "Printer settings" in any other place, other than the HP Solution Center, it would not change the default value.  Then, when I would print from a web page, involking the print dialog box, and then I click 'Properties' and get 'The printer settings' page (even when you browse the HP Solution Center, I could change it to a print job, but he would not change the default value.

  Once again, in summer, to change the default printer settings:

  HP solutions Center (software)

  > Settings (on the lower navigation bar)

  > The printer settings (whatever you choose here becomes by default)

• Photosmart HP 7520: Two questions - one who changed the default for printing, saving another scans

  Recently, I had a problem when I go to print a document.  It is default to the fax.  I've never used the fax so doesn't understand why this should happen.  He always missed HP Photosmart 7520 series.  How to bring back the default?

  Next issue: I want to scan an image and save it to the computer.  I chose the 'computer' it attempts to analyze and comes up with this error: "no connection without a computer.  See the help documentation and the printer to troubleshoot the connection"sometimes there is a popup on the computer screen that says to choose my program photo but most of the time I just get the error message on the printer screen.

  It becomes crazy.  This morning is not allow me to do anything unless I go into the Printer Wizard and click on the "scan a document or photo.  This time, it will "select a shortcut, etc.  I click on the choice I want then and it scans and wonder if this.  I can't to point to the exact location, I want the image to achieve (my library of images).

  I think I'll have to do the work around like that.  At least I can now.

  I hit the "accept, etc." and sign off the coast.  Thanks for your help.

• Server 2008 rdp client does not keep by default local printer

  Question: Windows XP workstation connects to the client terminal server 2008 for an application. The local workstation XP has a based LPT printer. The local printer is selected to be used through the RDP client and can be seen on the Terminal Server session. The central issue is that the RDP session will not keep the local printer the default XP workstation. It can be chosen and works, but never stays after the end of the session and reconnect or even log out of the session and you reconnect. It never remains the default printer, instead, it takes the default value of the server administrator. 1 of 7 other network printers.

  Points: The XP workstation has a printer LPT laserjet 4000 series as is the local default LPT. I followed a Tech Note "http://support.microsoft.com/default.aspx?scid=kb;en-us;302361" which seems to have nothing to do with this topic.

  Note: The server is standard with clients more Terminal server 2008. All the network printers according to works, and other customers to keep printers default network without problem.

  Annex Note: http://social.technet.microsoft.com/Forums/en/winserverTS/thread/2a6944a1-d1cb-492c-b413-75dcbe7dad9b is linked. I have this strategy enabled for all other customers. I guess what would be necessary, would be a work around.

  Hello Brian Weiser.

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Windows Server 2008 and would be better suited to the TechNet community. Please click HERE to find a community that will provide the support you want.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• LaserJet Professional P 1102w printer green light blinking, but will not be printed

  I had my P of professional LaserJet 1102w for a little less than a year.  I use it very rarely and very slightly (I've probably printed total less than 25 pages).  It has always worked well.

  But in the last 2 weeks, it stopped printing.  The Green led comes on, but it will not be printed.

  I went through the troubleshooting diagnostic tests on my computer (HP Pavilion, Windows 7 operating system).  The result shows that my computer detects a problem, but it cannot identify it (for example, no paper jam, no toner, etc..).  I manually checked it for a paper jam too.  I have not seen any problems.  I turned off, unplugged, he turned his back.  She still does not print.  And now the green light blinks, even if I turn it off several hours ago.

  Help, please.  Thank you.

  Update: I realized what it was.  My USB cable was very slightly loose.  I don't see when I checked manually the printer the first time.  But I checked a second time and just pushed him tighter.  Problem solved.

• How to change default C4680 printing options

  Desktop computer HP, 64-bit processor.   Windows 7

  I had many odd order issues with my printer cartridges is not admitted, after reinstalling

  all the software printer (which does not solve the problem), I finally found a cartridge that "seems" to have

  eliminated the problem (for awhile).

  But now: 'properties' values return continually to: paper type = "Paper advanced HP", quality of printing = 'the best '.

  and the color to "High quality" options  ... Also disables "show preview before printing"...

  If this reset whenever I print a page, I receive minutes of the impression that I don't want.

  If I change them all, print or cancel the print request, then go back - I find that all have been reset to higher values (very slow) ultra print.

  How can I change these default settings - permanently?

  Hello diffnameand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems with your print settings.  I would like to suggestconsulting this document on changing the settings to print in Windows 7

  Good luck and please let me know the results of these measures. Thanks for posting on the HP Forums!

• All-in-one HP Deskjet 2540: How do I set the default to print in black and white only

  The manual says this, but it applies to a PC and I have a Mac:

  "If you want to print a black and white document using a black ink only, click on the Advanced button. Printing from the drop in grayscale, select black ink only, and then click OK. »

  Someone knows how to set the printer to print only black & white for a Mac?

  As an accompaniment, there are security settings that must be configured to reduce the risk of access remotely for the printing device?

  Thank you

  Hello
  Follow the steps below to print using black ink only:

  1. from the application used to print, click the file menu and select print.  The print window is displayed.
  NOTE: The print window might be minimized: click Show details to display all available parameters.

  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  3. Select Type/quality paper in the menu dropdown.

  4. click the triangle next to color Options of spending parameters.

  5. set the color to grayscale field.

  6. set the Mode to grayscale in black cartridge only.

  You can save the settings for later use by clicking preset > save current settings as preset... Once you print using the saved preset will remain by default up to what we will choose another preset.