default comparison gold
Hey!
If the first VI is used for the automatic creation of the model of the gold and the ground. This VI creates the model of an input image, puts the top mask (by default, ignore, Edge) and recorded in a specific location.
The other VI - one for inspection using vision assistant. To WILL I use the photo entry form a camera, make the filtering using the model created in previous VI (pattern), I put the mark on the best match and then use this c.s.. To reposition the template created in the previous VI (golden) to do the inspection of gold model.
So this algorithm works fine most of the time, but sometimes there is a problem with inspection of gold model. Match is found, c.s. is created, but when I use the template created in the previous VI, the region where there is no mask (the value of 0 in the mask pixels) are shown/presented as a default. This happens quite often (one of ten inspections). Why this region doesn't appear as a default because there is no default there. I did an inspection on peace even several times and sometimes there is a fault and other times everything is ok.
I am not allowed to view poster or VI, since it is a commercial project. I'm sorry, but please help me, ask questions etc. I have to solve this problem.
Thank you!
Matej
Dear DavidVr,
I noticed that if I shared a model in two works very well. So I think the problem was that I saved Pattern matching model and tamplate in the same file, althougt the image is the same. So now when I run the VI for the automatic creation of models he saves two temlates as two files distinct, and everything is OK. Thank you!
Matej
Tags: NI Hardware
Similar Questions
-
What is range IOpComparison argument for?
There are 2 overloads for the beach, but I can't find examples on the 3rd argument - IOpComparison.
Could you please tell me some examples or maybe provide a... Curious what he does.
Thank you!
Hi kirko7,
The optional argument of IOpComparison is for cases when you want to specify a different or custom comparer for the TData values within this range. The documentation for this lie in the Measurement Studio, Visual Studio help, including full documentation on members of each class. I've linked you reference documentation for this specific range constructor, which calls the instance of a comparator used to compare the minimum and maximum IOpComparison. It would be useful in cases where the default comparison method is not sufficient for your application to determine whether or not something is understood.
Unfortunately I could not find an example or a link to a help page, but you should be able to find the same documentation that I looked in Visual Studio can Studio help. Just search for "Range (TData)" to find the Builder range page, and you should be able to navigate from there to the manufacturer specific and documentation on IOpComparison.
-
Errors when trying to add GG DDL suport
Hello
I'm trying to add support for the DDL in an Oracle database using GG Version 11.2.1.0.3 Linux 11.2.0.4.
The marker configuration script work fine.
But the ddl_enable.sql contains errors:
SQL > ddl_setup.sql
Configure Oracle GoldenGate DDL replication script
Verify that the current user has privileges to install the DDL replication...
You will be asked the name of a schema for Oracle GoldenGate database objects.
NOTE: For a source of Oracle 10 g, the basket of the system must be disabled. For Oracle 11 g and later, it can be activated.
NOTE: The schema must be created before running this script.
NOTE: Stop all replication DDL before starting this installation.Enter the Oracle GoldenGate name schema: ogguser
Working, please wait...
Line to the ddl_setup_spool.txt fileChecking the sessions that hold locks on the tables of metadata Oracle Golden Gate...
Full version.
Using OGGUSER as a name of schema Oracle GoldenGate.
Working, please wait...
Script of DDL replication configuration has completed, run the script to check...
Please enter the name of a schema for GoldenGate database objects:
Name of schema setting for OGGUSERCLEAR_TRACE STATUS:
Error on line/pos
---------------------------------------- -----------------------------------------------------------------
No error no errorCREATE_TRACE STATUS:
Error on line/pos
---------------------------------------- -----------------------------------------------------------------
No error no errorTRACE_PUT_LINE STATUS:
Error on line/pos
---------------------------------------- -----------------------------------------------------------------
No error no errorINITIAL_SETUP STATUS:
Error on line/pos
---------------------------------------- -----------------------------------------------------------------
No error no errorSTATUS OF THE DDLVERSIONSPECIFIC PACKAGE:
Error on line/pos
---------------------------------------- -----------------------------------------------------------------
No error no errorSTATUS OF THE DDLREPLICATION PACKAGE:
Error on line/pos
---------------------------------------- -----------------------------------------------------------------
No error no errorDDLREPLICATION STATE OF PACKAGE BODY:
Error on line/pos
---------------------------------------- -----------------------------------------------------------------
1878/17 PL/SQL: statement ignored
1878/42 PL/SQL: ORA-00942: table or view does not exist
2811/25 PL/SQL: statement ignored
2811/50 PL/SQL: ORA-00942: table or view does not exist
2850/29 PL/SQL: statement ignored
2850/54 PL/SQL: ORA-00942: table or view does not exist
3009/17 PL/SQL: statement ignored
3009/42 PL/SQL: ORA-00942: table or view does not exist
3040/29 PL/SQL: statement ignored
3040/54 PL/SQL: ORA-00942: table or view does not exist
3258/33 PL/SQL: statement ignoredError on line/pos
---------------------------------------- -----------------------------------------------------------------
3258/58 PL/SQL: ORA-00942: table or view does not exist
DDL IGNORE TABLE
-----------------------------------
OkDDL IGNORED THE JOURNAL TABLE
-----------------------------------
OkSTATUS OF THE DDLAUX PACKAGE:
Error on line/pos
---------------------------------------- -----------------------------------------------------------------
No error no errorDDLAUX STATE OF PACKAGE BODY:
Error on line/pos
---------------------------------------- -----------------------------------------------------------------
No error no errorSYS. STATUS OF THE DDLCTXINFO PACKAGE:
Error on line/pos
---------------------------------------- -----------------------------------------------------------------
No error no errorSYS. DDLCTXINFO STATE OF PACKAGE BODY:
Error on line/pos
---------------------------------------- -----------------------------------------------------------------
No error no errorDDL HISTORY TABLE
-----------------------------------
FAILURE: The Table does not existDDL HISTORY TABLE (1)
-----------------------------------
FAILURE: The Table does not existDUMP DOF TABLES
-----------------------------------
FAILURE: The Table does not existCOLUMNS OF DUMP DDL
-----------------------------------
FAILURE: The Table does not existGROUPS OF LOG DUMP DDL
-----------------------------------
FAILURE: The Table does not existSCORES OF DUMP DDL
-----------------------------------
FAILURE: The Table does not existDDL DUMP KEY PRIMARIES
-----------------------------------
FAILURE: The Table does not existSEQUENCE OF the DDL
-----------------------------------
FAILURE: The sequence does not existGGS_TEMP_COLS
-----------------------------------
OkGGS_TEMP_UK
-----------------------------------
OkSTATE OF THE DDL TRIGGER CODE:
Error on line/pos
---------------------------------------- -----------------------------------------------------------------
133/25 PL/SQL: ORA-02289: sequence does not exist
133/5 PL/SQL: statement ignored
992/29 PL/SQL: ORA-00942: table or view does not exist
992/4 PL/SQL: statement ignored
DDL TRIGGER SYSTEM STATUS
-----------------------------------
OkSTATUS OF RACE DDL TRIGGER
------------------------------------------------------------------------------------------------------------------------
ACTIVESTAYMETADATA TRIGGER
------------------------------------------------------------------------------------------------------------------------
OFFTRACING OF SQL FOR DDL TRIGGER
------------------------------------------------------------------------------------------------------------------------
0DDL TRIGGER TRACE LEVEL
------------------------------------------------------------------------------------------------------------------------
0LOCATION OF THE TRACE OF DDL FILE
------------------------------------------------------------------------------------------------------------------------
/U01/app/Oracle/diag/RDBMS/ogg11r2/ogg11r2/trace/ggs_ddl_trace.logAnalyze the status of the installation...
THE STATE OF REPLICATION DDL
------------------------------------------------------------------------------------------------------------------------
ERRORS in the installation of software components of DDL replication (6)Complete script.
Looking for the error of procedure of the STATE of DDLREPLICATION PACKAGE BODY:
SQL > select line, text from user_source
2 where name = 'DDLREPLICATION' and type = 'PACKAGE BODY' & line = line;
Enter the value of line: 1878
2 old: where name = 'DDLREPLICATION' and type = 'PACKAGE BODY' and line = & line
2 new: where name = 'DDLREPLICATION' and type = 'PACKAGE BODY' and line = 1878LINE
----------
TEXT
--------------------------------------------------------------------------------
1878
INSERT INTO 'OGGUSER '. "" (GGS_DDL_HIST_ALT).This table does not exist and I don't see any script to GG home that even this table.
The user ogg were created with this command:
create ogguser user identified by BIENVENUE1
default tablespace gold
tablespace temporary temp;
Grant connect, resource to ogguser.
Grant select any dictionary, select any table of ogguser;
grant create table ogguser;
grant the flashback any table of ogguser;
Grant execute on dbms_flashback to ogguser;
Grant execute on utl_file to ogguser;
grant create any table to ogguser;
grant insert any table of ogguser;
grant update any table to ogguser;
Grant delete any table ogguser;
grant drop any table of ogguser;
grant dba to ogguser;
EXEC DBMS_GOLDENGATE_AUTH. GRANT_ADMIN_PRIVILEGE ('OGGUSER');The trace file says:
ESS 4294967295-2015-01-22 13:00:45: DDL: Initial installation from
SESS 4294967295-2015-01-22 13:00:45: DOF: DOF create sequence: ORA-01031: insufficient privileges
SESS 4294967295-2015-01-22 13:00:45: DDL: initial_setup: ORA-01031: insufficient privileges
SESS 4294967295-2015-01-22 13:00:46: DDL: DEPARTURE OF DDL REPLICATION
SESS 4294967295-2015-01-22 13:00:50: DDL: instantiating new DDL replication batch
SESS 4294967295-2015-01-22 13:16: DDL: Initial installation from
SESS 4294967295-2015-01-22 13:16: DOF: DOF create sequence: ORA-01031: insufficient privileges
SESS 4294967295-2015-01-22 13:16: DDL: initial_setup: ORA-01031: insufficient privileges
SESS 4294967295-2015-01-22 13:16: DDL: DEPARTURE OF DDL REPLICATION
SESS 4294967295-2015-01-22 13:16:02: DDL: instantiating new DDL replication batch.
No idea how to solve this problem?
Thank you
Arturo
Hello
Finally the problem is fixed with MOS:
ORA-20782 creation GGS_DDL_RULES table; ORA-01031: insufficient Privs running DDL_setup.sql (Doc ID 1576164.1)
And add this extra privs outside the DBA ROLE.
grant create any table to ggs_app112;
grant create any view of ggs_app112;
grant create any ggs_app112 process;
grant create any sequence of ggs_app112;
grant create any index to ggs_app112;
grant create any trigger to ggs_app112;
grant create any view of ggs_app112;
Thanks for the help.
Concerning
Arturo
-
Suggestion: DatabaseEntry implements Cloneable, Comparable
Two suggestions...
1. the DatabaseEntry must implement the interface Cloneable. This is because DatabaseEntry objects are not immutable and used anywhere as long as the parameters and return values, etc. If some class for example, wants to make sure a DatabaseEntry parameter is not changed after they save a reference to it, or as they work, it must be copied somehow. Implement Cloneable, where the underlying [] of byte array is copied as well (of course), would be nice.
2 DatabaseEntry must implement Comparable < DatabaseEntry >. This comparison should make the same natural lexicographical comparison that the database itself uses to sort the keys. It must respect the configured offset and length of course. It would be convenient, for example, when using Cursor.getSearchKeyRange (). This method is your starting point, but you must manually detect the point of arrival. Possibility to simply compare your point of arrival set up (in the form of a DatabaseEntry) with the next button would make this easy.
Thank you.Hi Archie,
Thanks for the suggestions. I'll probably stick these in for the next major release.
The DatabaseEntry (DatabaseEntry) copy ctor is probably the way to go instead of Clonable.
For comparable, there is no association between an AN and a data base so that we do not know whether or not the user has defined a method of comparison. Comparable works only if the default comparison method is used.
Thanks again.
Charles Lamb
-
"Greater than or equal to ' searches on pavement
How can I implement a search "superior or equal to ' on the pavement?
I created a Btree that allows keys duplicated like this (I'm using Python and pybsddb ):
db_object = db. DB (DBE)
db_object.set_flags (db. DB_DUP | DB. DB_DUPSORT)
db_object. Open (define_primary_db_name (primary_db_name), None, db. DB_BTREE, db. DB_CREATE)
The keys are a series of integers, which here is a partial list (before they are inserted into the Btree, they are converted to strings):
... 90700, 91500, 91900, 92500, 93159, 94500, 94700, 95300, 96400, 97779, 98600, 98900 99900, 100000, 101900...
I would like to be able to question the Btree amount and get all values is greater than or equal to a specified amount.
I wrote a function to open a cursor, point to the first value using DB_SET_RANGE, and then iterate (via DB_NEXT) until the end:
def greater_than_equal_to (amount):
AMT = int (amount)
[data =]
CUR = db_object.cursor)
REC = cur.get (amount, db. DB_SET_RANGE)
If rec:
Data.Append(Rec[0])
all REC:
REC = cur.get (amount, db. DB_NEXT)
If it's not rec:
breaking
If int(rec[0]) & gt; = amt:
Data.Append(Rec[0])
cur. Close()
return data
But when I tried, I got only some, not all, results that I wanted, like on this model:
% greater_than_equal_to('91500')
'91500', '91900', '92500', '93159', '94500 ', '94700', ' 95300', ' 96400 ', ' 97779', 98600', 98900', 99900'
So, obviously, the requirement that the keys are strings has an impact on the results, since any key not starting not not by "9" is ignored by the cursor / call DB_SET_RANGE.
Is there a way to get the cursor to look at the keys correctly (i.e., in the form of numbers) to make it work as I wish?Hello. Your analysis of the situation is correct, because your keys are stored as strings, functions of default comparison sorts 150000 before 9. In order to avoid a complete analysis of the database for your search, you will need to implement a custom comparer to tell BDB how to sort your data. You can find more information about it here:
http://www.jcea.es/Programacion/pybsddb_doc/4.7.3/DB.html#set_bt_compare
and here:
http://www.Oracle.com/technology/documentation/Berkeley-DB/DB/api_c/db_set_bt_compare.htmlIf all your keys are numeric, the comparison function must be simple, convert the two values and return leftKey less to rightKey. If your keys are not purely digital, design a correct comparison function will be much more difficult.
Ben Schmeckpeper
-
I am trying to create a comparison between the model in gold but could not get the correct result. I used
IMAQ create,
Reading file,
Discover the gold model,
Compare the gold model,
To highlight the flaws of the model in gold,
respectively. Even if I use the same image, the defaults are coming. What is the problem with this VI? Do I need more steps to make that comparison?
I use images of "NI_Label" in the samples directory. You can see the VI as an attachment.
Hi sevincom,
The code that you have attached to your first post, it seems that you not set any region of interest before making the comparison of the model in gold. I recommend you to define an area of interest before the comparison to isolate what area should be compared.
Kind regards
Jordan G.
Technical sales engineer
National Instruments
-
Default value in always different columns in the comparison tool
Hi all
I generated a script of my model, in this script, I have a few columns with a default value,
After that I tried to compare with the import/datadictionary permutation model target my datamodeler with my database model,
but for all the columns that I've set the default, I found differences, when I check that the values are identical except for the space at the end of the value.
I checked the script and it's the row of the column:
LAST_MOD_TS DEFAULT SYSTIMESTAMP TIMESTAMP NOT NULL
AS you can see in the line is a double space between SYSTIMESTAMP and NOT NULL,.
This double space generates a default 'SYSTIMESTAMP' to the column value and the comparison tool is good then it's a difference,
but this difference is generated by the double space generated by the Publisher of the DOF.
I don't know if I can change something in my configuration of the tool to solve the problem,
Thanks in advanceHello
Thanks for reporting this problem. I connected a bug on this issue.
David
-
Disable the company to check for default browser
I'm trying to disable checking of default Firefox browser on my Windows 7 x 64 for a VM pool gold statue. I have seen several articles and they all suggest I have add the following lines in my preferences file:
pref("general.config.obscure_value", 0); pref("general.config.filename", "mozilla.cfg");
1. I add these lines and firefox does not open.
2. I disable the pref ("general.config.obscure_value", 0); line of my preferences file and firefox opens without the guest default browser, but only once.
3. I close Firefox and re-open it, and the default browser control is back. Can I recycle the three steps and reproduce it.Don't know where to go from here. Any help would be appreciated.
I see typo in datareporting.policy.dataSubmissionPolicyAccepted line: «;» false "instead of", false ".
Pref ("datareporting.policy.dataSubmissionPolicyAccepted"; false);
-
I want the current configuration of Firefox and watch returned to build 28.0 as default
I am currently using Firefox 32.0.3 now on my Windows XP machine and I hate the look, and it is difficult to navigate in the customization of the thing. It took fifteen minutes to configure even approaching resembling what I used to have. Even with the classic theme restaurateur, it's horrible. Firefox will be able to restore the appearance of 28.0? I would appreciate it if the next update returned to the classic settings and the default appearance. The only reason why I've updated has been due to supposed vulnerabilities in 28.0, otherwise I would never have updated. And as it is, I seriously think his return to 28.0 as it is, because only honest to God, I can't stand this thing. I would like to have a screenshot how he uses to get to show what he looks like now by comparison.
-
In previous versions of Firefox, when you click on the star next to the url, you can add this site to your Favorites. Another click and you can edit some fields on this bookmark, URL, file, etc...
But with FF17, the Description field is gone. You can only find when you manage your bookmarks, which is really easy to use.
Is it possible to add again the description field by clicking on the gold star? It is very useful to add notes about this Web site, and it's also resynchronize it with addins like Xmarks
Add code to the file userChrome.css below default @namespace.
Customization files (interface) userChrome.css and userContent.css (Web sites) are located in the chrome folder in the user profile folder.
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */ #editBMPanel_descriptionRow { visibility: visible !important; }
-
I watched a video on YouTube on how to cheat in a game online to get an unlimited number of gold. I went to the website to download the system used to cheat: CheatEngine.com. I downloaded it, thinking he would do nothing, but he did something. When I realized that it has changed my default search engine, I deleted the program. He changed my search on Google Chrome Google Search engine to Babylon and moy. I really want to return Google search! I've tried everything. Nothing works and I really want to search Google back. Can you help me?
It happened because you downloaded this thing cheatengine... even with what happened to me when I downloaded votre_fichier... Babylon to pop up when I wanted just for my google baby... sick right? Here's the trick to move things to google... Click on your wrench, then Tools, then the extensions and basket of Babylon in the trash! easy as that... it works ' coz I just did a few minutes ago... hope this helped... ^^
-
Hello, of I bought a United Nations Iphone 6 months of illicit drugs, I have recently broken the screen and a friend watching and comparing with son Iphone made me default note of the United Nations on the screen at the level of the face that is off camera. This defect is present SINCE the beginning but a lack of comparison I was never realized. Can my Iphone is under warranty, I GET a replacement?
Kind regards
N ° your iPhone is no longer under warranty because it was opened by a non - Apple Tech.
-
best practices for the evaluation of prerequisite logic GOLD
Greetings,
I think TS is not the basic features for the decision-making process (imp) for execution. All recommendations are welcomed and appreciated. Please find below the script.
I would like to perform some configuration steps (custom step types) to a signal generator based on the selected user 'Test '.
To make it simple for the signal generator Let's say, we have the following steps:
The Freq value | Define PWR lvl | Set the Modulation Type. Set the Modulation ON / OFF. Setting the output RF ON / OFF
For the selected user Tests say that we have Test (0) | B test (1) | C (2) to test (Test A & C requires Modulation, B does not work)
Here's my question:
I can't get the Freq VALUE | The VALUE PWR lvl | Value RF Power on / off to run installation of prerequisite for the evaluation of logic GOLD. (i.e. residents.) TestSelected == 0 | 1. 2)
Ditto for the Type of Modulation Set | The value of Modulation on / off (ie the inhabitants. TestSelected == 0 | 2)
Thanks in advance for any help provided.
Chazzzmd78
people of the country. TestSelected == 0 | 1. 2 would be at the local level. TestSelected is 3. You're doing a bitwise operation GOLD on numeric values, then the comparison.
You need
(the inhabitants. TestSelected == 0) | (the inhabitants. TestSelected == 1) | (the inhabitants. TestSelected is 3)
-
Compare the gold - change of scale model?
Hello
I have a prototype system of control works very well with the Template.vi or compare and find most of the defects in my DataSet.
However, currently I have position and scale information coming from the pattern match in compare it gold screw model (as in the example of OR). This works well when the samples have the same size, but if there are any changes to the scale but the comparison of the model begins to fight. (I tried the border thickness settings to ignore it, but it could be even better)
I would like to be able to use the pass information on the scale of the Pattern Match in the model compare gold, but when I just wire the value in front of the cluster of pattern match (as is done with the information of position and angle) the program and then not picking up not the other flaws he did before, even when the scale has not changed.
Has anyone encountered this problem before?
I have to somehow prepare the VI of model or compare to a size change?(final application is a system of inspection of logo, very similar to the example of NOR provided)
Obtained this sort ultimately (via a call to support) so leave a note for all those who in the future which has this problem:
The scheme normal game VI does not scale ouput information.
You must use the GEOMETRIC pattern match to get the information across.
-
Corresponding template or gold color
Hi all
I posted an earlier question on what advice can be given for equipment that could be used to acquire a fingerprint. I got a very helpful answer. Now I'm still working on this project of fingerprint recognition and reflected in the logic to use on the corresponding images. I came across the "pattern matching" and features "gold model' on NI Vision assistant and hoped someone could tell me on the good sense that I could get more information on how one of these features overview to their matches.
Thank you
OC
Hi OC,
It comes with NI Vision than the 400 + page manual Concepts of vision. That explains in detail all the features available in NI Vision, including filtering and comparison of model Golden.
This document can be found in
\National Instruments\Vision\Documentation\Concepts_Manual.pdf
Maybe you are looking for
-
Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?
Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?
-
Bluetooth A2DP audio playback crashes every 5 seconds (Portege R500 VistaSP1)
Hello I fully reinstalled on my new Portege R500 Vista SP1and newest Bluetooth 6.10.10. When playing music from an A2DP Bluetooth audio output device with Mediaplayer music is still suspended every 5 seconds. With my cell phone this A2DP audio device
-
Compaq Presario CQ61: How to create an e-mail account?
I asked for help on recovery forum a couple of days and Cheryl G provided expert advice. Very much appreciated. Understand that I am a dinosaur in PC, how can I enter the details needed to put my Gmail account on the system of the laptop recovered? T
-
Dell Inspiron 6000 systemroot failure - STOP: C00000218 {registry file failure}
Hello I met the 'blue screen of death' with the message "STOP: C00000218 {registry file failure} the registry cannot load the hive (file): \SystemRoot\System32\config\SOFTWARE or its log or replacing." It is corruption, absent or not accessible in wr
-
How will I know if my deleted email is always on micsosoft servers (hotmail)?
How will I know if my deleted email is always on the servers of microsoft (hotmail)?